[Keyboard] YD60MQ support (#5911)

* Keep ASCII art consistent with keymap

* Possible fix for xyverz ortho keymap: define RGBLED_NUM

* Update DZ60 keymap; TODO store old keymap under different directory?

* Change RGUI to RALT because 7u spacebar is too long

* Save old bottom row keymap

* Update Iris keymap: replace backslash with grv

* Add ortho_4x12 layout

* Added Delete key to Iris keymap

* Move delete key

* Oh look a new keyboard

* ortho4x12: get an adjust layer back

* Remove jj40 keymap, add custom power draw #define

* Set WhiteFox to advertise only 100mA of power draw

* Update WhiteFox keymap

* Update WF keymap (2)

* Remove lets_split keymap, update community krusli keymap

* Add #define for BACKLIGHT_LEVELS (unused)

* Update Whitefox keymap

* Add YD60 from auto-generated kbfirmware files

* Bring files up to speed with new standards

* Fix: KEYMAP -> LAYOUT

* Fix keymap differences (DZ60 -> YD60)

* Update keymap

* Update README

* Fix RShift position

* Specify that the port is for the YD60MQ variant

* Update keyboards/iris/keymaps/krusli/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix Iris and Let's Split keymaps

* Remove unused keymap file

* Use #include QMK_KEYBOARD_H

* Add atmel-dfu selection to yd60

* Rename dir to YD60MQ, update definitions

* Use new convenience macros/functions for led_set_user

* Use #pragma once

* Change all ?= to = in rules.mk

* Use pragma once for yd60mq.h

* Take out DZ60 and Iris changes

* Remove now-removed Iris folder

* Revert adding ortho_4x12

* Revert on xyverz ortho_4x12 keymap

* Undo deleting JJ40 keymap files

* Don't revert beyond upstream jj40 state

* Extra files from earlier commit is to be deleted

* Remove WhiteFox keymap not in upstream yet

* Re-add my Let's Split keymap

* Revert keymap changes

* Cleanup: indentation

* Update keyboards/yd60mq/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/yd60mq/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Cleanup & move kb backlighting code to yd60mq.c

* Update README, rename to lowercase

* Update README: rename to lowercase

* Update README with links and picture of PCB

* Remove PREVENT_STUCK_MODIFIERS

Co-Authored-By: Drashna Jaelre <drashna@live.com>

1 files changed, 61 insertions, 0 deletions

diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk
new file mode 100644
index 0000000000..2a89630116
--- /dev/null
+++ b/keyboards/yd60mq/rules.mk
@@ -0,0 +1,61 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes