[Keyboard] Update Work Louder keyboards (#18109)

1 files changed, 5 insertions, 149 deletions

diff --git a/keyboards/work_louder/rgb_functions.c b/keyboards/work_louder/rgb_functions.c
index c9106b3976..d0cb93ccbc 100644
--- a/keyboards/work_louder/rgb_functions.c
+++ b/keyboards/work_louder/rgb_functions.c
@@ -18,159 +18,15 @@
 #include "rgb_functions.h"
 
 #ifdef RGBLIGHT_ENABLE
-#    include "ws2812.h"
-#    include <avr/interrupt.h>
-#    include <avr/io.h>
-#    include <util/delay.h>
+#undef RGB_DI_PIN
+#define RGB_DI_PIN RGBLIGHT_DI_PIN
 
-#    define pinmask(pin) (_BV((pin)&0xF))
+#define ws2812_setleds ws2812_rgb_setleds
 
-/*
- * Forward declare internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi);
-
-/*
-  This routine writes an array of bytes with RGB values to the Dataout pin
-  using the fast 800kHz clockless WS2811/2812 protocol.
-*/
-
-// Timing in ns
-#    define w_zeropulse 350
-#    define w_onepulse 900
-#    define w_totalperiod 1250
-
-// Fixed cycles used by the inner loop
-#    define w_fixedlow 2
-#    define w_fixedhigh 4
-#    define w_fixedtotal 8
-
-// Insert NOPs to match the timing, if possible
-#    define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000)
-#    define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000)
-#    define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000)
-
-// w1_nops - nops between rising edge and falling edge - low
-#    if w_zerocycles >= w_fixedlow
-#        define w1_nops (w_zerocycles - w_fixedlow)
-#    else
-#        define w1_nops 0
-#    endif
-
-// w2_nops - nops between fe low and fe high
-#    if w_onecycles >= (w_fixedhigh + w1_nops)
-#        define w2_nops (w_onecycles - w_fixedhigh - w1_nops)
-#    else
-#        define w2_nops 0
-#    endif
-
-// w3_nops - nops to complete loop
-#    if w_totalcycles >= (w_fixedtotal + w1_nops + w2_nops)
-#        define w3_nops (w_totalcycles - w_fixedtotal - w1_nops - w2_nops)
-#    else
-#        define w3_nops 0
-#    endif
-
-// The only critical timing parameter is the minimum pulse length of the "0"
-// Warn or throw error if this timing can not be met with current F_CPU settings.
-#    define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000)
-#    if w_lowtime > 550
-#        error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
-#    elif w_lowtime > 450
-#        warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
-#        warning "Please consider a higher clockspeed, if possible"
-#    endif
-
-#    define w_nop1 "nop      \n\t"
-#    define w_nop2 "rjmp .+0 \n\t"
-#    define w_nop4 w_nop2 w_nop2
-#    define w_nop8 w_nop4 w_nop4
-#    define w_nop16 w_nop8 w_nop8
-
-static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi) {
-    uint8_t curbyte, ctr, sreg_prev;
-
-    sreg_prev = SREG;
-    cli();
-
-    while (datlen--) {
-        curbyte = (*data++);
-
-        asm volatile("       ldi   %0,8  \n\t"
-                     "loop%=:            \n\t"
-                     "       out   %2,%3 \n\t"  //  '1' [01] '0' [01] - re
-#    if (w1_nops & 1)
-                     w_nop1
-#    endif
-#    if (w1_nops & 2)
-                         w_nop2
-#    endif
-#    if (w1_nops & 4)
-                             w_nop4
-#    endif
-#    if (w1_nops & 8)
-                                 w_nop8
-#    endif
-#    if (w1_nops & 16)
-                                     w_nop16
-#    endif
-                     "       sbrs  %1,7  \n\t"  //  '1' [03] '0' [02]
-                     "       out   %2,%4 \n\t"  //  '1' [--] '0' [03] - fe-low
-                     "       lsl   %1    \n\t"  //  '1' [04] '0' [04]
-#    if (w2_nops & 1)
-                     w_nop1
-#    endif
-#    if (w2_nops & 2)
-                         w_nop2
-#    endif
-#    if (w2_nops & 4)
-                             w_nop4
-#    endif
-#    if (w2_nops & 8)
-                                 w_nop8
-#    endif
-#    if (w2_nops & 16)
-                                     w_nop16
-#    endif
-                     "       out   %2,%4 \n\t"  //  '1' [+1] '0' [+1] - fe-high
-#    if (w3_nops & 1)
-                     w_nop1
-#    endif
-#    if (w3_nops & 2)
-                         w_nop2
-#    endif
-#    if (w3_nops & 4)
-                             w_nop4
-#    endif
-#    if (w3_nops & 8)
-                                 w_nop8
-#    endif
-#    if (w3_nops & 16)
-                                     w_nop16
-#    endif
-
-                     "       dec   %0    \n\t"  //  '1' [+2] '0' [+2]
-                     "       brne  loop%=\n\t"  //  '1' [+3] '0' [+4]
-                     : "=&d"(ctr)
-                     : "r"(curbyte), "I"(_SFR_IO_ADDR(PORTx_ADDRESS(RGBLIGHT_DI_PIN))), "r"(maskhi), "r"(masklo));
-    }
-
-    SREG = sreg_prev;
-}
+#include "ws2812.c"
 
 void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) {
-    DDRx_ADDRESS(RGBLIGHT_DI_PIN) |= pinmask(RGBLIGHT_DI_PIN);
-
-    uint8_t masklo = ~(pinmask(RGBLIGHT_DI_PIN)) & PORTx_ADDRESS(RGBLIGHT_DI_PIN);
-    uint8_t maskhi = pinmask(RGBLIGHT_DI_PIN) | PORTx_ADDRESS(RGBLIGHT_DI_PIN);
-
-    ws2812_sendarray_mask((uint8_t *)start_led, num_leds * sizeof(LED_TYPE), masklo, maskhi);
-
-    _delay_us(WS2812_TRST_US);
+    ws2812_setleds(start_led, num_leds);
 }
 #endif