remove all keyboards but ergodox and planck

11 files changed, 0 insertions, 445 deletions

diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h
deleted file mode 100644
index c4d1891833..0000000000
--- a/keyboards/wilba_tech/wt8_a/config.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x6582 // wilba.tech
-#define PRODUCT_ID      0x008A // 8-A
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    wilba.tech
-#define PRODUCT         wilba.tech WT8-A
-#define DESCRIPTION     wilba.tech WT8-A
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { F4, F1, B2, B6, F6, F7, D5, B4 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-// Does not use WT_MONO_BACKLIGHT
-// #define WT_MONO_BACKLIGHT
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*1*8*2)) = (35+64)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 99
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 925
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/wilba_tech/wt8_a/info.json b/keyboards/wilba_tech/wt8_a/info.json
deleted file mode 100644
index c40d44db72..0000000000
--- a/keyboards/wilba_tech/wt8_a/info.json
+++ /dev/null
@@ -1,13 +0,0 @@
-{
-    "keyboard_name": "wilba.tech WT8-A", 
-    "url": "https://wilba.tech", 
-    "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
-    "width": 4, 
-    "height": 2, 
-    "layouts": {
-        "LAYOUT": {
-            "layout": [{"label":"x", "x":0, "y":0}, {"label":"x", "x":1, "y":0}, {"label":"x", "x":2, "y":0}, {"label":"x", "x":3, "y":0}, {"label":"x", "x":0, "y":1}, {"label":"x", "x":1, "y":1}, {"label":"x", "x":2, "y":1}, {"label":"x", "x":3, "y":1}]
-        }
-    }
-}
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c b/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c
deleted file mode 100644
index a9f40362c7..0000000000
--- a/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    LAYOUT(
-        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
-
diff --git a/keyboards/wilba_tech/wt8_a/keymaps/rys/keymap.c b/keyboards/wilba_tech/wt8_a/keymaps/rys/keymap.c
deleted file mode 100644
index bf0dda0fa8..0000000000
--- a/keyboards/wilba_tech/wt8_a/keymaps/rys/keymap.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _BL0 0
-#define _FL1 1
-#define _FL2 2
-#define _FL3 3
-
-#define MACOSLK LCTL(LGUI(KC_Q)) // CTRL+CMD+Q == screen lock in macOS 10.13+
-
-enum rys_keycodes {
-  STOKEN1 = SAFE_RANGE,
-  STOKEN2,
-  STOKEN3,
-  STOKEN4
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch(keycode) {
-    case STOKEN1:
-      if (record->event.pressed) {
-        SEND_STRING(RYS_STOKEN1);
-      }
-      break;
-    case STOKEN2:
-      if (record->event.pressed) {
-        SEND_STRING(RYS_STOKEN2);
-      }
-      break;
-    case STOKEN3:
-      if (record->event.pressed) {
-        SEND_STRING(RYS_STOKEN3);
-      }
-      break;
-    case STOKEN4:
-      if (record->event.pressed) {
-        SEND_STRING(RYS_STOKEN4);
-      }
-      break;
-  }
-  return true;
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap base layer (_BL0) - default layer
-   * ,---------------------------.
-   * | ST1  | ST2  | ST3  | ST4  |
-   * |---------------------------|
-   * |      | LOCK | VOL- | VOL+ |
-   * `---------------------------'
-   */
-   [_BL0] = LAYOUT(
-     STOKEN1, STOKEN2, STOKEN3,     STOKEN4,
-     _______, MACOSLK, KC__VOLDOWN, KC__VOLUP),
-  /* Keymap base layer (_FL1) - function layer 1
-   * ,---------------------------.
-   * |      |      |      |      |
-   * |---------------------------|
-   * |      |      |      |      |
-   * `---------------------------'
-   */
-   [_FL1] = LAYOUT(
-     _______, _______, _______, _______,
-     _______, _______, _______, _______),
-  /* Keymap base layer (_FL2) - function layer 2
-   * ,---------------------------.
-   * |      |      |      |      |
-   * |---------------------------|
-   * |      |      |      |      |
-   * `---------------------------'
-   */
-   [_FL2] = LAYOUT(
-     _______, _______, _______, _______,
-     _______, _______, _______, _______),
-  /* Keymap base layer (_FL3) - function layer 3
-   * ,---------------------------.
-   * |      |      |      |      |
-   * |---------------------------|
-   * |      |      |      |      |
-   * `---------------------------'
-   */
-   [_FL3] = LAYOUT(
-     _______, _______, _______, _______,
-     _______, _______, _______, _______),
-};
diff --git a/keyboards/wilba_tech/wt8_a/keymaps/rys/rules.mk b/keyboards/wilba_tech/wt8_a/keymaps/rys/rules.mk
deleted file mode 100644
index 60cbf8bfc4..0000000000
--- a/keyboards/wilba_tech/wt8_a/keymaps/rys/rules.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-RYS_STOKEN1 = "$(shell security find-generic-password -a qmk -s wt8a-1 -w)"
-RYS_STOKEN2 = "$(shell security find-generic-password -a qmk -s wt8a-2 -w)"
-RYS_STOKEN3 = "$(shell security find-generic-password -a qmk -s wt8a-3 -w)"
-RYS_STOKEN4 = "$(shell security find-generic-password -a qmk -s wt8a-4 -w)"
-
-CFLAGS += -DRYS_STOKEN1=\"$(RYS_STOKEN1)\"
-CFLAGS += -DRYS_STOKEN2=\"$(RYS_STOKEN2)\"
-CFLAGS += -DRYS_STOKEN3=\"$(RYS_STOKEN3)\"
-CFLAGS += -DRYS_STOKEN4=\"$(RYS_STOKEN4)\"
diff --git a/keyboards/wilba_tech/wt8_a/keymaps/via/keymap.c b/keyboards/wilba_tech/wt8_a/keymaps/via/keymap.c
deleted file mode 100644
index a9f40362c7..0000000000
--- a/keyboards/wilba_tech/wt8_a/keymaps/via/keymap.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    LAYOUT(
-        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
-
-    LAYOUT(
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
-
diff --git a/keyboards/wilba_tech/wt8_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt8_a/keymaps/via/rules.mk
deleted file mode 100644
index f072c67198..0000000000
--- a/keyboards/wilba_tech/wt8_a/keymaps/via/rules.mk
+++ /dev/null
@@ -1,68 +0,0 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c
-		
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt8_a/readme.md b/keyboards/wilba_tech/wt8_a/readme.md
deleted file mode 100644
index ab3cfdc55b..0000000000
--- a/keyboards/wilba_tech/wt8_a/readme.md
+++ /dev/null
@@ -1,15 +0,0 @@
-# WILBA.TECH WT8-A
-
-![WILBA.TECH WT8-A](https://wilba.tech)
-
-WT8-A is an 8-key macropad PCB, designed for the Singa Ocelot. [More info at wilba.tech](https://wilba.tech/)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
-Hardware Supported: WILBA.TECH WT8-A  
-Hardware Availability: Singa Keyboards
-
-Make example for this keyboard (after setting up your build environment):
-
-    make wilba_tech/wt8_a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk
deleted file mode 100644
index f1c632289c..0000000000
--- a/keyboards/wilba_tech/wt8_a/rules.mk
+++ /dev/null
@@ -1,65 +0,0 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c
-		
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.c b/keyboards/wilba_tech/wt8_a/wt8_a.c
deleted file mode 100644
index ccff6d62c9..0000000000
--- a/keyboards/wilba_tech/wt8_a/wt8_a.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Nothing to see here, move along... ;-)
diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.h b/keyboards/wilba_tech/wt8_a/wt8_a.h
deleted file mode 100644
index 0fb754f0ab..0000000000
--- a/keyboards/wilba_tech/wt8_a/wt8_a.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define ____ KC_NO
-
-#define LAYOUT(                                   \
-    K00, K01, K02, K03, K04, K05, K06, K07 )       \
-    {                                              \
-        {K00, K01, K02, K03, K04, K05, K06, K07 }, \
-    }