remove all keyboards but ergodox and planck

7 files changed, 0 insertions, 232 deletions

diff --git a/keyboards/southpole/config.h b/keyboards/southpole/config.h
deleted file mode 100644
index 5992a360f5..0000000000
--- a/keyboards/southpole/config.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-//#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    u/waxpoetic
-#define PRODUCT         southpole
-#define DESCRIPTION     southpaw keyboard, left hand numpad
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 20
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, D3, C6, C7, D5 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4, E6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 0
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 0
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
\ No newline at end of file
diff --git a/keyboards/southpole/keymaps/default/keymap.c b/keyboards/southpole/keymaps/default/keymap.c
deleted file mode 100644
index 78cb81f4ba..0000000000
--- a/keyboards/southpole/keymaps/default/keymap.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	LAYOUT( 
-		KC_NLCK, KC_SLSH, KC_ASTR, KC_MINS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME, \
-		KC_7, KC_8, KC_9, KC_PLUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \
-		KC_4, KC_5, KC_6, KC_ENT, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
-		KC_1, KC_2, KC_3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_END, \
-		KC_0, KC_DOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), \
-
-	LAYOUT( 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, RESET, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
-		)
-
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
diff --git a/keyboards/southpole/keymaps/foobeard/keymap.c b/keyboards/southpole/keymaps/foobeard/keymap.c
deleted file mode 100644
index ef2710d0a3..0000000000
--- a/keyboards/southpole/keymaps/foobeard/keymap.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public LicensezZZ
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum layers {
-  _QWERTY,
-  _RAISE
-};
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-};
-
-#define RAISE MO(_RAISE)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	/* Layer 0, default layer
-	*  ,--------------------------------------------------------------------------------------------------------------------------------------------.
-	*  |NumLck|   /  |   *  |   -  | | Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |    0 |   -  |   =  |   \  |Delete| Ins  |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |  7   |   8  |   9  |   +  | | Tab   |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |    P |   {  |   }  |   BkSpc   | Vol+ |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |  4   |   5  |   6  |   +  | | Caps   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |    ; |   '  |      Return     | Vol- |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |  1   |   2  |   3  |  En  | | LShft     |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |    RShft   |   Up   | Mute |
-	*  |------+------+------+------+-+----------------------------------------------------------------------------------------------+--------+------|
-	*  |      0      |   .  |  En  | | Ctrl  |  Win  |  Alt  |                  Space                            |  Fn  |    | Left |  Down  | Right|
-	*  `------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------'
-	*/
-    [_QWERTY] = LAYOUT( 
-		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DELETE, KC_INS, \
-		KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, \
-		KC_P4, KC_P5, KC_P6, KC_PENT, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, \
-		KC_P1, KC_P2, KC_P3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_MUTE, \
-		KC_P0, KC_PDOT,      KC_LCTL, KC_LGUI, KC_LALT,                              KC_SPC,              RAISE, KC_LEFT, KC_DOWN, KC_RGHT \
-	),
-
-	/*layer 1, function layer
-	*  ,--------------------------------------------------------------------------------------------------------------------------------------------.
-	*  |Reset |      |      |      | |  `  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      |Calc  |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |      |      |      |      | |       |      |      |      |      |      |      |      |      |      |      |      |      |           |      |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |      |      |      |      | |        |      |      |      |      |      |      |      |      |      |      |      |                 |      |
-	*  |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------|
-	*  |      |      |      |      | |           |      |      |      |      |      |      |      |      |      |      |            |        |      |
-	*  |------+------+------+------+-+----------------------------------------------------------------------------------------------+--------+------|
-	*  |             |      |      | |       |       |       |                                                   |      |    |      |        |      |
-	*  `------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------'
-	*/
-
-	[_RAISE] = LAYOUT( 
-		RESET, _______, _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_CALC, \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-	)
-};
\ No newline at end of file
diff --git a/keyboards/southpole/readme.md b/keyboards/southpole/readme.md
deleted file mode 100644
index 4ea99ad349..0000000000
--- a/keyboards/southpole/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# Southpole
-[Southpole](https://imgur.com/a/MZ2wdYt)
-
-PCB designed by u/waxpoetic for a southpaw style board with an hhkb style layout.
-
-Keyboard Maintainer: ericduns  
-Hardware Supported: Teensy 2.0
-
-Make example for this keyboard (after setting up your build environment):
-
-    make southpole:default
-    
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/southpole/rules.mk b/keyboards/southpole/rules.mk
deleted file mode 100644
index 356b75bb6c..0000000000
--- a/keyboards/southpole/rules.mk
+++ /dev/null
@@ -1,56 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-#AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
\ No newline at end of file
diff --git a/keyboards/southpole/southpole.c b/keyboards/southpole/southpole.c
deleted file mode 100644
index f345893fb5..0000000000
--- a/keyboards/southpole/southpole.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "southpole.h"
diff --git a/keyboards/southpole/southpole.h b/keyboards/southpole/southpole.h
deleted file mode 100644
index 99cf2ce7b5..0000000000
--- a/keyboards/southpole/southpole.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117,       K119, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,             K219, \
-	K300, K301, K302,       K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316,             K319, \
-	      K401, K402,       K404, K405, K406,             K409,                   K413,       K415, K416,             K419  \
-) \
- { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018,  K019 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  KC_NO, K119 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215,  K216,  KC_NO, KC_NO, K219 }, \
-	{ K300,  K301,  K302,  KC_NO, K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  KC_NO, KC_NO, K319 }, \
-	{ KC_NO, K401,  K402,  KC_NO, K404,  K405,  K406,  KC_NO, KC_NO, K409,  KC_NO, KC_NO, KC_NO, K413,  KC_NO, K415,  K416,  KC_NO, KC_NO, K419 }  \
-}