[Keyboard] Added Krush Solder (60% & 65%) (#15074)

23 files changed, 944 insertions, 0 deletions

diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md
new file mode 100644
index 0000000000..34e996f0bf
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/readme.md
@@ -0,0 +1,25 @@
+# Krush65
+
+A 65% keyboard sold in several variants. 
+
+1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case.
+
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
+
+* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
+* Hardware Supported: Krush65 
+* Hardware Availability: [Mechkey.store](https://mechkey.store/)
+
+Make examples for this keyboard (after setting up your build environment):
+
+    make sawnsprojects/krush/krush65/solder:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h
new file mode 100644
index 0000000000..9356e6cfba
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h
@@ -0,0 +1,68 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5350
+#define PRODUCT_ID      0x6B31
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    SawnsProjects
+#define PRODUCT         Krush65 - Solder
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
+#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
+#define UNUSED_PINS
+
+/* indicator */
+//  #define LED_CAPS_LOCK_PIN F0
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+/* Caps Lock */
+#define LED_CAPS_LOCK_PIN F0
+
+/* rotary */
+#define ENCODERS_PAD_A { D0 }
+#define ENCODERS_PAD_B { B3 }
+#define ENCODER_RESOLUTION 4
+
+#define RGB_DI_PIN F1
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 20
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#endif
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c
new file mode 100644
index 0000000000..039f8739b4
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c
@@ -0,0 +1,58 @@
+/* Copyright 2020 Neil Brian Ramirez
+ * Copyright 2021 drashna jael're (@drashna)
+ * Copyright 2021 uybv
+ * Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "encoder_actions.h"
+
+#ifdef ENCODER_ENABLE
+
+#    ifdef ENCODERS
+static uint8_t  encoder_state[ENCODERS] = {0};
+static keypos_t encoder_cw[ENCODERS]    = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[ENCODERS]   = ENCODERS_CCW_KEY;
+#    endif
+
+void encoder_action_unregister(void) {
+#    ifdef ENCODERS
+    for (int index = 0; index < ENCODERS; ++index) {
+        if (encoder_state[index]) {
+            keyevent_t encoder_event = (keyevent_t) {
+                .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
+                .pressed = false,
+                .time = (timer_read() | 1)
+            };
+            encoder_state[index] = 0;
+            action_exec(encoder_event);
+        }
+    }
+#    endif
+}
+
+void encoder_action_register(uint8_t index, bool clockwise) {
+#    ifdef ENCODERS
+    keyevent_t encoder_event = (keyevent_t) {
+        .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
+        .pressed = true,
+        .time = (timer_read() | 1)
+    };
+    encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
+    action_exec(encoder_event);
+#    endif
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h
new file mode 100644
index 0000000000..098210d40c
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h
@@ -0,0 +1,21 @@
+/* Copyright 2020 Neil Brian Ramirez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+void encoder_action_unregister(void);
+
+void encoder_action_register(uint8_t index, bool clockwise);
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json
new file mode 100644
index 0000000000..6c10d660e2
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json
@@ -0,0 +1,299 @@
+{
+    "keyboard_name": "Krush65 Solder",
+    "url": "",
+    "maintainer": "MaiTheSan",
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "K00 (B1,C7)", "x": 0, "y": 0 },
+                { "label": "K10 (B2,C7)", "x": 1, "y": 0 },
+                { "label": "K01 (B1,C6)", "x": 2, "y": 0 },
+                { "label": "K11 (B2,C6)", "x": 3, "y": 0 },
+                { "label": "K02 (B1,B6)", "x": 4, "y": 0 },
+                { "label": "K12 (B2,B6)", "x": 5, "y": 0 },
+                { "label": "K03 (B1,B5)", "x": 6, "y": 0 },
+                { "label": "K13 (B2,B5)", "x": 7, "y": 0 },
+                { "label": "K04 (B1,B4)", "x": 8, "y": 0 },
+                { "label": "K14 (B2,B4)", "x": 9, "y": 0 },
+                { "label": "K05 (B1,D7)", "x": 10, "y": 0 },
+                { "label": "K15 (B2,D7)", "x": 11, "y": 0 },
+                { "label": "K06 (B1,D5)", "x": 12, "y": 0 },
+                { "label": "K26 (D1,D5)", "x": 13, "y": 0 },
+                { "label": "K17 (B2,D3)", "x": 14, "y": 0 },
+                { "label": "K07 (B1,D3)", "x": 15, "y": 0 },
+                { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
+                { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
+                { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
+                { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
+                { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
+                { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
+                { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
+                { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
+                { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
+                { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
+                { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
+                { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
+                { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
+                { "label": "K37 (D2,D3)", "x": 15, "y": 1 },
+                { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
+                { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
+                { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
+                { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
+                { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
+                { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
+                { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
+                { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
+                { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
+                { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
+                { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
+                { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
+                { "label": "K57 (D6,D3)", "x": 15, "y": 2 },
+                { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
+                { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
+                { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
+                { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
+                { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
+                { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
+                { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
+                { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
+                { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
+                { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
+                { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
+                { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
+                { "label": "K77 (F7,D3)", "x": 14, "y": 3 },
+                { "label": "K67 (F6,D3)", "x": 15, "y": 3 },
+                { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
+                { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
+                { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 },
+                { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 },
+                { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 },
+                { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
+                { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
+                { "label": "K95 (F4,D7)", "x": 13, "y": 4 },
+                { "label": "K97 (F4,D3)", "x": 14, "y": 4 },
+                { "label": "K87 (F5,D3)", "x": 15, "y": 4 }
+            ]
+        },
+        "LAYOUT_65_ansi_blocker_split_bs_sp": {
+            "layout": [
+                { "label": "K00 (B1,C7)", "x": 0, "y": 0 },
+                { "label": "K10 (B2,C7)", "x": 1, "y": 0 },
+                { "label": "K01 (B1,C6)", "x": 2, "y": 0 },
+                { "label": "K11 (B2,C6)", "x": 3, "y": 0 },
+                { "label": "K02 (B1,B6)", "x": 4, "y": 0 },
+                { "label": "K12 (B2,B6)", "x": 5, "y": 0 },
+                { "label": "K03 (B1,B5)", "x": 6, "y": 0 },
+                { "label": "K13 (B2,B5)", "x": 7, "y": 0 },
+                { "label": "K04 (B1,B4)", "x": 8, "y": 0 },
+                { "label": "K14 (B2,B4)", "x": 9, "y": 0 },
+                { "label": "K05 (B1,D7)", "x": 10, "y": 0 },
+                { "label": "K15 (B2,D7)", "x": 11, "y": 0 },
+                { "label": "K06 (B1,D5)", "x": 12, "y": 0 },
+                { "label": "K26 (D1,D5)", "x": 13, "y": 0 },
+                { "label": "K17 (B2,D3)", "x": 14, "y": 0 },
+                { "label": "K07 (B1,D3)", "x": 15, "y": 0 },
+                { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
+                { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
+                { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
+                { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
+                { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
+                { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
+                { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
+                { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
+                { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
+                { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
+                { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
+                { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
+                { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
+                { "label": "K37 (D2,D3)", "x": 15, "y": 1 },
+                { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
+                { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
+                { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
+                { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
+                { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
+                { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
+                { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
+                { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
+                { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
+                { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
+                { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
+                { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
+                { "label": "K57 (D6,D3)", "x": 15, "y": 2 },
+                { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
+                { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
+                { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
+                { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
+                { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
+                { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
+                { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
+                { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
+                { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
+                { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
+                { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
+                { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
+                { "label": "K77 (F7,D3)", "x": 14, "y": 3 },
+                { "label": "K67 (F6,D3)", "x": 15, "y": 3 },
+                { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
+                { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
+                { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 },
+                { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 },
+                { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 },
+                { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
+                { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
+                { "label": "K95 (F4,D7)", "x": 13, "y": 4 },
+                { "label": "K97 (F4,D3)", "x": 14, "y": 4 },
+                { "label": "K87 (F5,D3)", "x": 15, "y": 4 }
+            ]
+        },
+
+	"LAYOUT_65_ansi_blocker": {
+            "layout": [
+                { "label": "K00 (B1,C7)", "x": 0, "y": 0 },
+                { "label": "K10 (B2,C7)", "x": 1, "y": 0 },
+                { "label": "K01 (B1,C6)", "x": 2, "y": 0 },
+                { "label": "K11 (B2,C6)", "x": 3, "y": 0 },
+                { "label": "K02 (B1,B6)", "x": 4, "y": 0 },
+                { "label": "K12 (B2,B6)", "x": 5, "y": 0 },
+                { "label": "K03 (B1,B5)", "x": 6, "y": 0 },
+                { "label": "K13 (B2,B5)", "x": 7, "y": 0 },
+                { "label": "K04 (B1,B4)", "x": 8, "y": 0 },
+                { "label": "K14 (B2,B4)", "x": 9, "y": 0 },
+                { "label": "K05 (B1,D7)", "x": 10, "y": 0 },
+                { "label": "K15 (B2,D7)", "x": 11, "y": 0 },
+                { "label": "K06 (B1,D5)", "x": 12, "y": 0 },
+                { "label": "K26 (D1,D5)", "x": 13, "y": 0, "w": 2 },
+                { "label": "K07 (B1,D3)", "x": 15, "y": 0 },
+                { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
+                { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
+                { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
+                { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
+                { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
+                { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
+                { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
+                { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
+                { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
+                { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
+                { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
+                { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
+                { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
+                { "label": "K37 (D2,D3)", "x": 15, "y": 1 },
+                { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
+                { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
+                { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
+                { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
+                { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
+                { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
+                { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
+                { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
+                { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
+                { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
+                { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
+                { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
+                { "label": "K57 (D6,D3)", "x": 15, "y": 2 },
+                { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
+                { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
+                { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
+                { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
+                { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
+                { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
+                { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
+                { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
+                { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
+                { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
+                { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
+                { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
+                { "label": "K77 (F7,D3)", "x": 14, "y": 3 },
+                { "label": "K67 (F6,D3)", "x": 15, "y": 3 },
+                { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
+                { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
+                { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 },
+                { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
+                { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
+                { "label": "K95 (F4,D7)", "x": 13, "y": 4 },
+                { "label": "K97 (F4,D3)", "x": 14, "y": 4 },
+                { "label": "K87 (F5,D3)", "x": 15, "y": 4 }
+            ]
+        },
+	"LAYOUT_65_ansi_blocker_split_bs": {
+            "layout": [
+                { "label": "K00 (B1,C7)", "x": 0, "y": 0 },
+                { "label": "K10 (B2,C7)", "x": 1, "y": 0 },
+                { "label": "K01 (B1,C6)", "x": 2, "y": 0 },
+                { "label": "K11 (B2,C6)", "x": 3, "y": 0 },
+                { "label": "K02 (B1,B6)", "x": 4, "y": 0 },
+                { "label": "K12 (B2,B6)", "x": 5, "y": 0 },
+                { "label": "K03 (B1,B5)", "x": 6, "y": 0 },
+                { "label": "K13 (B2,B5)", "x": 7, "y": 0 },
+                { "label": "K04 (B1,B4)", "x": 8, "y": 0 },
+                { "label": "K14 (B2,B4)", "x": 9, "y": 0 },
+                { "label": "K05 (B1,D7)", "x": 10, "y": 0 },
+                { "label": "K15 (B2,D7)", "x": 11, "y": 0 },
+                { "label": "K06 (B1,D5)", "x": 12, "y": 0 },
+                { "label": "K26 (D1,D5)", "x": 13, "y": 0 },
+                { "label": "K17 (B2,D3)", "x": 14, "y": 0 },
+                { "label": "K07 (B1,D3)", "x": 15, "y": 0 },
+                { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 },
+                { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 },
+                { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 },
+                { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 },
+                { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 },
+                { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 },
+                { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 },
+                { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 },
+                { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 },
+                { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 },
+                { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 },
+                { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 },
+                { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 },
+                { "label": "K37 (D2,D3)", "x": 15, "y": 1 },
+                { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 },
+                { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 },
+                { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 },
+                { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 },
+                { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 },
+                { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 },
+                { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 },
+                { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 },
+                { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 },
+                { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 },
+                { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 },
+                { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 },
+                { "label": "K57 (D6,D3)", "x": 15, "y": 2 },
+                { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 },
+                { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 },
+                { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 },
+                { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 },
+                { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 },
+                { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 },
+                { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 },
+                { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 },
+                { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 },
+                { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 },
+                { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 },
+                { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 },
+                { "label": "K77 (F7,D3)", "x": 14, "y": 3 },
+                { "label": "K67 (F6,D3)", "x": 15, "y": 3 },
+                { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 },
+                { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 },
+                { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 },
+                { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 },
+                { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 },
+                { "label": "K95 (F4,D7)", "x": 13, "y": 4 },
+                { "label": "K97 (F4,D3)", "x": 14, "y": 4 },
+                { "label": "K87 (F5,D3)", "x": 15, "y": 4 }
+            ]
+        }
+    }
+}
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c
new file mode 100644
index 0000000000..99c42be954
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SPC,  KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+
+};
+
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md
new file mode 100644
index 0000000000..181cc9a013
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md
@@ -0,0 +1 @@
+# The keymap for krush65 solder layout ansi blocker
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c
new file mode 100644
index 0000000000..b2019e5ec8
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+    [0] = LAYOUT_65_ansi_blocker_split_bs_sp(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  KC_PSCR, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_65_ansi_blocker_split_bs_sp(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+
+};
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md
new file mode 100644
index 0000000000..b6d1da89aa
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md
@@ -0,0 +1 @@
+# The keymap for krush65 solder layout ansi blocker with split backspace and split spacebar
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c
new file mode 100644
index 0000000000..6cd8dd4baf
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+
+    [0] = LAYOUT_65_ansi_blocker_split_bs(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  KC_PSCR, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_65_ansi_blocker_split_bs(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+
+};
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md
new file mode 100644
index 0000000000..162da7a903
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md
@@ -0,0 +1 @@
+# The keymap for krush65 solder layout ansi blocker with split backspace
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c
new file mode 100644
index 0000000000..eecb1e5f8f
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  KC_PSCR, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_all(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+
+};
+
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md
new file mode 100644
index 0000000000..1f98b857ce
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for krush65 solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c
new file mode 100644
index 0000000000..3a7fa10cfa
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c
@@ -0,0 +1,75 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+        [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  KC_PSCR, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_all(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+    [2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+    [3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+};
+
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (get_highest_layer(layer_state)) {
+            case 0:
+                // main layer - move mouse right (CW) and left (CCW)
+                if (clockwise) {
+                    tap_code_delay(KC_VOLU, 10);
+                } else {
+                    tap_code_delay(KC_VOLD, 10);
+                }
+                break;
+            default:
+                // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW)
+                if (clockwise) {
+                    tap_code16(C(KC_EQL));
+                } else {
+                    tap_code16(C(KC_MINS));
+                }
+                break;
+        }
+    }
+    return false;
+}
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md
new file mode 100644
index 0000000000..ff710c521f
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md
@@ -0,0 +1 @@
+#custom keymap for MikeTheSan
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk
new file mode 100644
index 0000000000..036bd6d1c3
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c
new file mode 100644
index 0000000000..8036529c91
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c
@@ -0,0 +1,51 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,  KC_PSCR, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT  
+    ),
+
+    [1] = LAYOUT_all(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+    [2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+    [3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+    ),
+};
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md
new file mode 100644
index 0000000000..2c88050060
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md
@@ -0,0 +1 @@
+# The VIA keymap for krush65 solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk
new file mode 100644
index 0000000000..036bd6d1c3
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/readme.md
new file mode 100644
index 0000000000..27af715eda
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/readme.md
@@ -0,0 +1,15 @@
+# Krush65 solder
+
+![Krush65](https://cdn.shopify.com/s/files/1/0299/9497/5365/files/4_-_2BS9fH2_2048x2048.jpg)
+
+A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). 
+
+* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
+* Hardware Supported: Krush65
+* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make sawnsprojects/krush65/solder:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk
new file mode 100644
index 0000000000..1adb996504
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE  = yes        # Console for debug
+COMMAND_ENABLE  = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+
+LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.c b/keyboards/sawnsprojects/krush/krush65/solder/solder.c
new file mode 100644
index 0000000000..b8a7729725
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.c
@@ -0,0 +1,53 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "solder.h"
+#include "encoder_actions.h"
+
+   /*  Custom encoder control - handles CW/CCW turning of encoder
+     *  Default behavior:
+     *    main layer:
+     *       CW: move mouse right
+     *      CCW: move mouse left
+     *    other layers:
+     *       CW: = (equals/plus - increase slider in Adobe products)
+     *      CCW: - (minus/underscore - decrease slider in adobe products)
+     */
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    if (index == 0) {
+        switch (get_highest_layer(layer_state)) {
+
+            case 0:
+                // main layer - move mouse right (CW) and left (CCW)
+                if (clockwise) {
+                    tap_code_delay(KC_VOLU, 10);
+                } else {
+                    tap_code_delay(KC_VOLD, 10);
+                }
+                break;
+            default:
+                // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW)
+                if (clockwise) {
+                    tap_code16(C(KC_EQL));
+                } else {
+                    tap_code16(C(KC_MINS));
+                }
+                break;
+        }
+    }
+    return true;
+}
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.h b/keyboards/sawnsprojects/krush/krush65/solder/solder.h
new file mode 100644
index 0000000000..58f6bed57b
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.h
@@ -0,0 +1,93 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
+    K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
+    { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
+    { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
+    { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
+    { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \
+    { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \
+}
+#define LAYOUT_65_ansi_blocker( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
+    K80, K90, K81, K92, K94, K85, K95, K97, K87  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, KC_NO, KC_NO }, \
+    { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
+    { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
+    { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
+    { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \
+    { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \
+}
+#define LAYOUT_65_ansi_blocker_split_bs( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
+    K80, K90, K81, K92, K94, K85, K95, K97, K87  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
+    { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
+    { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
+    { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
+    { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \
+    { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \
+}
+#define LAYOUT_65_ansi_blocker_split_bs_sp( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \
+    K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \
+    { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \
+    { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \
+    { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \
+    { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \
+    { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \
+}
+