remove all keyboards but ergodox and planck

3 files changed, 0 insertions, 160 deletions

diff --git a/keyboards/primekb/prime_e/keymaps/via/keymap.c b/keyboards/primekb/prime_e/keymaps/via/keymap.c
deleted file mode 100644
index 8b5b13866a..0000000000
--- a/keyboards/primekb/prime_e/keymaps/via/keymap.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Copyright 2018 Holten Campbell
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    LAYOUT(
-		KC_ESC,   KC_Q,     KC_W,     KC_E,   KC_R,    KC_T,          KC_Y,   KC_U,     KC_I, KC_O,    KC_P,    KC_DEL, KC_BSPC,
-		KC_TAB,   KC_A,     KC_S,     KC_D,   KC_F,    KC_G,          KC_H,   KC_J,     KC_K, KC_L,    KC_QUOT, KC_ENT,
-		KC_LSFT,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,          MO(1),  KC_N,     KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,
-		KC_LCTL,  KC_LALT,                    KC_RBRC, MO(1),	        KC_SPC, KC_MINS,                          KC_LGUI, TO(1)
-    )
-};
-
-void matrix_init_user(void) {
-  // set CapsLock LED to output and low
-  setPinOutput(B1);
-  writePinHigh(B1);
-  // set NumLock LED to output and low
-  setPinOutput(B2);
-  writePinHigh(B2);
-  // set ScrollLock LED to output and low
-  setPinOutput(B3);
-  writePinHigh(B3);
-}
-
-void matrix_scan_user(void) {
-
-}
-
-
-void led_set_user(uint8_t usb_led) {
-  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-    writePinHigh(B2);
-  } else {
-    writePinLow(B2);
-  }
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinHigh(B1);
-  } else {
-    writePinLow(B1);
-  }
-/*
-  if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-    writePinHigh(B3);
-  } else {
-    writePinLow(B3);
-  }*/
-
-}
-
-//function for layer indicator LED
-uint32_t layer_state_set_user(uint32_t state)
-{
-    if (biton32(state) == 1) {
-    writePinHigh(B3);
-	} else {
-		writePinLow(B3);
-    }
-    return state;
-}
diff --git a/keyboards/primekb/prime_e/keymaps/via/readme.md b/keyboards/primekb/prime_e/keymaps/via/readme.md
deleted file mode 100644
index bbd56c0cc7..0000000000
--- a/keyboards/primekb/prime_e/keymaps/via/readme.md
+++ /dev/null
@@ -1,2 +0,0 @@
-# The VIA keymap for Prime_E
-This keymap is for compatibility with the VIA configurator.
\ No newline at end of file
diff --git a/keyboards/primekb/prime_e/keymaps/via/rules.mk b/keyboards/primekb/prime_e/keymaps/via/rules.mk
deleted file mode 100644
index 93b2e70e7c..0000000000
--- a/keyboards/primekb/prime_e/keymaps/via/rules.mk
+++ /dev/null
@@ -1,85 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-# This is the VIA magic
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-SRC += keyboards/wilba_tech/wt_main.c
\ No newline at end of file