remove all keyboards but ergodox and planck

22 files changed, 0 insertions, 990 deletions

diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h
deleted file mode 100644
index d7df83cfec..0000000000
--- a/keyboards/miuni32/config.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Bigtuna.io
-#define PRODUCT         Miuni32
-#define DESCRIPTION     A custom keyboard for writers
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 11
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F4, D7}
-#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0}
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#define RGB_DI_PIN D0     // The pin your RGB strip is wired to
-#define RGBLED_NUM 17     // Number of LEDs
-#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-#endif
diff --git a/keyboards/miuni32/info.json b/keyboards/miuni32/info.json
deleted file mode 100644
index fcd161dc04..0000000000
--- a/keyboards/miuni32/info.json
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-    "keyboard_name": "miuni32",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 11,
-    "height": 3,
-    "layouts": {
-        "LAYOUT": {
-            "key_count": 32,
-            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "w":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}]
-        },
-        "LAYOUT_ortho_3x11": {
-            "key_count": 33,
-            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}]
-        }
-    }
-}
diff --git a/keyboards/miuni32/keymaps/adam-lee/config.h b/keyboards/miuni32/keymaps/adam-lee/config.h
deleted file mode 100644
index df06a26206..0000000000
--- a/keyboards/miuni32/keymaps/adam-lee/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/miuni32/keymaps/adam-lee/keymap.c b/keyboards/miuni32/keymaps/adam-lee/keymap.c
deleted file mode 100644
index 754c20f7d3..0000000000
--- a/keyboards/miuni32/keymaps/adam-lee/keymap.c
+++ /dev/null
@@ -1,119 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Level 0: Default Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   Q   |   W   |   E   |   R   |   T   |   Y   |   U   |   I   |   O   |   P   |  BSP  |
-     * |---------------------------------------------------------------------------------------|
-     * |   A   |   S   |   D   |   F   |   G   |   H   |   J   |   K   |   L   |  ENT  |LT(1|,)|
-     * |---------------------------------------------------------------------------------------|
-     * |LT(3|Z)|   X   |   C   |   V   |      SPC      |   B   |   N   |   M   |  RSFT |LT(2|.)|
-     * |---------------------------------------------------------------------------------------|
-     */
-  [0] = LAYOUT(
-    KC_Q,        KC_W, KC_E, KC_R, KC_T, KC_Y,   KC_U, KC_I, KC_O, KC_P,    KC_BSPC,
-    KC_A,        KC_S, KC_D, KC_F, KC_G, KC_H,   KC_J, KC_K, KC_L, KC_ENT,  LT(1, KC_COMMA),
-    LT(3, KC_Z), KC_X, KC_C, KC_V,       KC_SPC, KC_B, KC_N, KC_M, KC_RSFT, LT(2, KC_DOT)
-  ),
-  /* Level 1: Numbers Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |  ESC  |   7   |   8   |   9   |   /   |   *   |   .   |   ,   |   (   |   )   |  DEL  |
-     * |---------------------------------------------------------------------------------------|
-     * |  TAB  |   4   |   5   |   6   |   -   |   +   |  HOME |   UP  |  END  |  PGUP |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     * |  LATL |   1   |   2   |   3   |   0           |  LEFT |  DOWN |  RGHT |  PGDN | RSHFT |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [1] = LAYOUT(
-    KC_ESC,  KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT,  KC_COMM, KC_LPRN, KC_RPRN, KC_DEL,
-    KC_TAB,  KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______,
-    KC_LALT, KC_1, KC_2, KC_3, KC_0,             KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_RSFT
-  ),
-  /* Level 2: Symbols Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   !   |   @   |   #   |   $   |   %   |   ^   |   &   |   *   |   -   |   +   |   =   |
-     * |---------------------------------------------------------------------------------------|
-     * |   {   |   }   |   [   |   ]   |  TRNS |  TRNS |   \   |   ;   |   :   |   `   |   ?   |
-     * |---------------------------------------------------------------------------------------|
-     * |  LSFT |  LCTL |   L   |   T   |      TAB      |   N   |  TRNS |  TRNS |  RCTL |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [2] = LAYOUT(
-    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_PLUS, KC_EQL,
-    KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, _______, _______, KC_BSLS, KC_SCLN, KC_COLN, KC_GRV,  KC_QUES,
-    KC_LSFT, KC_LCTL, KC_L,    KC_T,             KC_TAB,  KC_N,    _______, _______, KC_RCTL, _______
-  ),
-  /* Level 3: RGB Layer
-     * ,---------------------------------------------------------------------------------------.
-     * | RESET |  TRNS |  TRNS |  TRNS |  TRNS |   F1  |   F2  |   F3  |   F4  |   F5  |   F6  |
-     * |---------------------------------------------------------------------------------------|
-     * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD|   NO  |RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD|  TRNS |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     * |  TRNS |  TRNS |  TRNS |  TRNS |       F7      |   F8  |   F9  |  F10  |  F11  |  F12  |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [3] = LAYOUT(
-    RESET,   _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,
-    RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_NO,   RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,
-    _______, _______, _______, _______,          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12
-  )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
diff --git a/keyboards/miuni32/keymaps/adam-lee/readme.md b/keyboards/miuni32/keymaps/adam-lee/readme.md
deleted file mode 100644
index 4cff8ef5a3..0000000000
--- a/keyboards/miuni32/keymaps/adam-lee/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for miuni32
\ No newline at end of file
diff --git a/keyboards/miuni32/keymaps/adam-lee/rules.mk b/keyboards/miuni32/keymaps/adam-lee/rules.mk
deleted file mode 100644
index 3a741d20a7..0000000000
--- a/keyboards/miuni32/keymaps/adam-lee/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/miuni32/keymaps/default/config.h b/keyboards/miuni32/keymaps/default/config.h
deleted file mode 100644
index 271f48d001..0000000000
--- a/keyboards/miuni32/keymaps/default/config.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#pragma once
-
-// place overrides here
diff --git a/keyboards/miuni32/keymaps/default/keymap.c b/keyboards/miuni32/keymaps/default/keymap.c
deleted file mode 100644
index 754c20f7d3..0000000000
--- a/keyboards/miuni32/keymaps/default/keymap.c
+++ /dev/null
@@ -1,119 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Level 0: Default Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   Q   |   W   |   E   |   R   |   T   |   Y   |   U   |   I   |   O   |   P   |  BSP  |
-     * |---------------------------------------------------------------------------------------|
-     * |   A   |   S   |   D   |   F   |   G   |   H   |   J   |   K   |   L   |  ENT  |LT(1|,)|
-     * |---------------------------------------------------------------------------------------|
-     * |LT(3|Z)|   X   |   C   |   V   |      SPC      |   B   |   N   |   M   |  RSFT |LT(2|.)|
-     * |---------------------------------------------------------------------------------------|
-     */
-  [0] = LAYOUT(
-    KC_Q,        KC_W, KC_E, KC_R, KC_T, KC_Y,   KC_U, KC_I, KC_O, KC_P,    KC_BSPC,
-    KC_A,        KC_S, KC_D, KC_F, KC_G, KC_H,   KC_J, KC_K, KC_L, KC_ENT,  LT(1, KC_COMMA),
-    LT(3, KC_Z), KC_X, KC_C, KC_V,       KC_SPC, KC_B, KC_N, KC_M, KC_RSFT, LT(2, KC_DOT)
-  ),
-  /* Level 1: Numbers Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |  ESC  |   7   |   8   |   9   |   /   |   *   |   .   |   ,   |   (   |   )   |  DEL  |
-     * |---------------------------------------------------------------------------------------|
-     * |  TAB  |   4   |   5   |   6   |   -   |   +   |  HOME |   UP  |  END  |  PGUP |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     * |  LATL |   1   |   2   |   3   |   0           |  LEFT |  DOWN |  RGHT |  PGDN | RSHFT |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [1] = LAYOUT(
-    KC_ESC,  KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT,  KC_COMM, KC_LPRN, KC_RPRN, KC_DEL,
-    KC_TAB,  KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______,
-    KC_LALT, KC_1, KC_2, KC_3, KC_0,             KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_RSFT
-  ),
-  /* Level 2: Symbols Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   !   |   @   |   #   |   $   |   %   |   ^   |   &   |   *   |   -   |   +   |   =   |
-     * |---------------------------------------------------------------------------------------|
-     * |   {   |   }   |   [   |   ]   |  TRNS |  TRNS |   \   |   ;   |   :   |   `   |   ?   |
-     * |---------------------------------------------------------------------------------------|
-     * |  LSFT |  LCTL |   L   |   T   |      TAB      |   N   |  TRNS |  TRNS |  RCTL |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [2] = LAYOUT(
-    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_PLUS, KC_EQL,
-    KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, _______, _______, KC_BSLS, KC_SCLN, KC_COLN, KC_GRV,  KC_QUES,
-    KC_LSFT, KC_LCTL, KC_L,    KC_T,             KC_TAB,  KC_N,    _______, _______, KC_RCTL, _______
-  ),
-  /* Level 3: RGB Layer
-     * ,---------------------------------------------------------------------------------------.
-     * | RESET |  TRNS |  TRNS |  TRNS |  TRNS |   F1  |   F2  |   F3  |   F4  |   F5  |   F6  |
-     * |---------------------------------------------------------------------------------------|
-     * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD|   NO  |RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD|  TRNS |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     * |  TRNS |  TRNS |  TRNS |  TRNS |       F7      |   F8  |   F9  |  F10  |  F11  |  F12  |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [3] = LAYOUT(
-    RESET,   _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,
-    RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_NO,   RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,
-    _______, _______, _______, _______,          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12
-  )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
diff --git a/keyboards/miuni32/keymaps/default/readme.md b/keyboards/miuni32/keymaps/default/readme.md
deleted file mode 100644
index 4cff8ef5a3..0000000000
--- a/keyboards/miuni32/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for miuni32
\ No newline at end of file
diff --git a/keyboards/miuni32/keymaps/default/rules.mk b/keyboards/miuni32/keymaps/default/rules.mk
deleted file mode 100644
index 3a741d20a7..0000000000
--- a/keyboards/miuni32/keymaps/default/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/miuni32/keymaps/ht_156/config.h b/keyboards/miuni32/keymaps/ht_156/config.h
deleted file mode 100644
index df06a26206..0000000000
--- a/keyboards/miuni32/keymaps/ht_156/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/miuni32/keymaps/ht_156/keymap.c b/keyboards/miuni32/keymaps/ht_156/keymap.c
deleted file mode 100644
index 54e4bcf52d..0000000000
--- a/keyboards/miuni32/keymaps/ht_156/keymap.c
+++ /dev/null
@@ -1,181 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Keyboard layer definitions
-#define BASE    0
-#define NUMBERS 1
-#define SYMBOLS 2
-#define MEDIA   3
-
-// Keyboard macro defintions
-#define GIT_ST  M(0)
-#define GIT_PU  M(1)
-#define GIT_CM  M(2)
-#define HM_DIR  M(3)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Level 0: Default Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   Q   |   W   |   E   |   R   |   T   |   Y   |   U   |   I   |   O   |   P   |  BSP  |
-     * |---------------------------------------------------------------------------------------|
-     * |   A   |   S   |   D   |   F   |   G   |   H   |   J   |   K   |   L   |  ENT  |  RSFT |
-     * |---------------------------------------------------------------------------------------|
-     * |LT(2|Z)|LT(3|X)|   C   |   V   |   B   |  SPC  |   N   |   M   |   ,   |LT(1|.)|  RCTL |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [BASE] = LAYOUT_ortho_3x11(
-    KC_Q,        KC_W,        KC_E, KC_R, KC_T, KC_Y,   KC_U, KC_I, KC_O,     KC_P,          KC_BSPC,
-    KC_A,        KC_S,        KC_D, KC_F, KC_G, KC_H,   KC_J, KC_K, KC_L,     KC_ENT,        KC_RSFT,
-    LT(2, KC_Z), LT(3, KC_X), KC_C, KC_V, KC_B, KC_SPC, KC_N, KC_M, KC_COMMA, LT(1, KC_DOT), KC_RCTL
-  ),
-  /* Level 1: Numbers Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |  ESC  |   7   |   8   |   9   |   /   |   *   |   .   |   ,   |   (   |   )   |  DEL  |
-     * |---------------------------------------------------------------------------------------|
-     * |  TAB  |   4   |   5   |   6   |   -   |   +   |  HOME |   UP  |  END  |  INS  |  PGUP |
-     * |---------------------------------------------------------------------------------------|
-     * |  LATL |   1   |   2   |   3   |   0   |  ENT  |  LEFT |  DOWN |  RGHT | !TRNS!|  PGDN |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [NUMBERS] = LAYOUT_ortho_3x11(
-    KC_ESC,  KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT,  KC_COMM, KC_LPRN, KC_RPRN,   KC_DEL,
-    KC_TAB,  KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP,   KC_END,  KC_INSERT, KC_PGUP,
-    KC_LALT, KC_1, KC_2, KC_3, KC_0,    KC_ENT,  KC_LEFT, KC_DOWN, KC_RGHT, _______,   KC_PGDN
-  ),
-  /* Level 2: Symbols Layer
-     * ,---------------------------------------------------------------------------------------.
-     * |   !   |   @   |   #   |   $   |   %   |   ^   |   &   |   *   |   _   |   =   |   ?   |
-     * |---------------------------------------------------------------------------------------|
-     * | RESET |  LSFT |   ~   |   {   |   }   |   \   |   |   |   ;   |   :   |   `   |   "   |
-     * |---------------------------------------------------------------------------------------|
-     * | !TRNS!|  LCTL |  TRNS |   [   |   ]   |  TAB  |   <   |   >   |  TRNS |  RCTL |  TRNS |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [SYMBOLS] = LAYOUT_ortho_3x11(
-    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_EQL, KC_QUES,
-    RESET,   KC_LSFT, KC_TILD, KC_LCBR, KC_RCBR, KC_BSLS, KC_PIPE, KC_SCLN, KC_COLN, KC_GRV, KC_DQUO,
-    _______, KC_LCTL, _______, KC_LBRC, KC_RBRC, KC_TAB,  KC_LABK, KC_RABK, _______, KC_RCTL, _______
-  ),
-  /* Level 3: Media Layer
-   * ,---------------------------------------------------------------------------------------.
-   * |RGB_TOG|RGB_HUI|RGB_SAI|RGB_VAI| GIT_CM|  CALC |  WREF |  WFAV |  MUTE |  VOLD |  VOLU |
-   * |---------------------------------------------------------------------------------------|
-   * |RGB_MOD|RGB_HUD|RGB_SAD|RGB_VAD| GIT_ST|  WHOM |  WBAK |  WFWD |  TRNS |  STOP |  PLAY |
-   * |---------------------------------------------------------------------------------------|
-   * |  TRNS | !TRNS!|  TRNS | HM_DIR| GIT_PU|  MYCM |  WSTP |  WSCH |  MSEL |  MPRV |  MNXT |
-   * |---------------------------------------------------------------------------------------|
-   */
-  [MEDIA] = LAYOUT_ortho_3x11(
-    RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, GIT_CM, KC_CALC, KC_WREF, KC_WFAV, KC_MUTE, KC_VOLD, KC_VOLU,
-    RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, GIT_ST, KC_WHOM, KC_WBAK, KC_WFWD, _______, KC_MSTP, KC_MPLY,
-    _______, _______, _______, HM_DIR,  GIT_PU, KC_MYCM, KC_WSTP, KC_WSCH, KC_MSEL, KC_MPRV, KC_MNXT
-  )
-};
-
-void press_and_release_key(uint8_t code)
-{
-    register_code(code);
-    unregister_code(code);
-}
-
-void press_and_release_mod_key(uint8_t mod, uint8_t code)
-{
-    register_code(mod);
-    register_code(code);
-    unregister_code(code);
-    unregister_code(mod);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id)
-      {
-        case 0:
-          if (record->event.pressed)
-          {
-            return MACRO(T(G), T(I), T(T), T(SPC),
-                         T(S), T(T), T(A), T(T), T(U), T(S), END);
-          }
-        break;
-        case 1:
-          if (record->event.pressed)
-          {
-            return MACRO(T(G), T(I), T(T), T(SPC),
-                         T(P), T(U), T(L), T(L), END);
-          }
-        break;
-        case 2:
-          if (record->event.pressed)
-          {
-            return MACRO(T(G), T(I), T(T), T(SPC),
-                         T(C), T(O), T(M), T(M), T(I), T(T), END);
-          }
-        break;
-        case 3:
-          if (record->event.pressed)
-          {
-            /*press_and_release_key(KC_C);
-            press_and_release_key(KC_D);
-            press_and_release_key(KC_SPC);
-            press_and_release_mod_key(KC_LSFT, KC_GRV);
-            press_and_release_key(KC_SLSH);
-            press_and_release_key(KC_Q);
-            press_and_release_key(KC_M);
-            press_and_release_key(KC_K);
-            press_and_release_mod_key(KC_LSFT, KC_MINS);*/
-            return MACRO(I(0),
-                         T(C), T(D), T(SPC),
-                         D(LSFT), T(GRV), U(LSFT), T(SLSH),
-                         T(Q), T(M), T(K), D(LSFT), T(MINS), U(LSFT),
-                         T(F), T(I), T(R), T(M), T(W), T(A), T(R), T(E), T(SLSH),
-                         T(K), T(E), T(Y), T(B), T(O), T(A), T(R), T(D), T(S), T(SLSH),
-                         T(M), T(I), T(U), T(N), T(I), T(3), T(2), T(SLSH),
-                         T(K), T(E), T(Y), T(M), T(A), T(P), T(S), END);
-          }
-      }
-    return MACRO_NONE;
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
diff --git a/keyboards/miuni32/keymaps/ht_156/readme.md b/keyboards/miuni32/keymaps/ht_156/readme.md
deleted file mode 100644
index e46cc6d539..0000000000
--- a/keyboards/miuni32/keymaps/ht_156/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# ht_156's keymap for miuni32, using 33 keys
diff --git a/keyboards/miuni32/keymaps/ht_156/rules.mk b/keyboards/miuni32/keymaps/ht_156/rules.mk
deleted file mode 100644
index 3a741d20a7..0000000000
--- a/keyboards/miuni32/keymaps/ht_156/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/miuni32/keymaps/ki/config.h b/keyboards/miuni32/keymaps/ki/config.h
deleted file mode 100644
index df06a26206..0000000000
--- a/keyboards/miuni32/keymaps/ki/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/miuni32/keymaps/ki/keymap.c b/keyboards/miuni32/keymaps/ki/keymap.c
deleted file mode 100644
index 59d2e285cb..0000000000
--- a/keyboards/miuni32/keymaps/ki/keymap.c
+++ /dev/null
@@ -1,148 +0,0 @@
-#include QMK_KEYBOARD_H
-
-enum miuni32_layers {
-  _BEAKL,
-  _LOWER,
-  _RAISE,
-  _UNION
-};
-
-enum miuni32_keycodes {
-  BEAKL = SAFE_RANGE,
-  LOWER,
-  RAISE
-};
-
-#define SPC_SHF SFT_T(KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Level 0: BEAKL
-   * ,---------------------------------------------------------------------------------------.
-   * |   J   |   H   |   O   |   U   |   K   | LOWER |   G   |   C   |   R   |   F   |   Z   |
-   * |---------------------------------------------------------------------------------------|
-   * |   Q   |   I   |   E   |   A   |   Y   | RAISE |   D   |   S   |   T   |   N   |   B   |
-   * |---------------------------------------------------------------------------------------|
-   * |   /   |   ,   |   '   |   .   |   X   |SPC\SHF|   W   |   M   |   L   |   P   |   V   |
-   * |---------------------------------------------------------------------------------------|
-   */
-  [_BEAKL] = LAYOUT_ortho_3x11(
-    KC_J,    KC_H,    KC_O,    KC_U,   KC_K, LOWER,   KC_G, KC_C, KC_R, KC_F, KC_Z,
-    KC_Q,    KC_I,    KC_E,    KC_A,   KC_Y, RAISE,   KC_D, KC_S, KC_T, KC_N, KC_B,
-    KC_SLSH, KC_COMM, KC_QUOT, KC_DOT, KC_X, SPC_SHF, KC_W, KC_M, KC_L, KC_P, KC_V
-  ),
-  /* Lower
-     * ,---------------------------------------------------------------------------------------.
-     * |  Tab  |   {   |   _   |   }   |   &   |       |  Gui  |   [   |   %   |   ]   | Bkspc |
-     * |---------------------------------------------------------------------------------------|
-     * |   \   |   (   |   1   |   )   |   #   |       |   $   |   <   |   0   |   >   |   |   |
-     * |---------------------------------------------------------------------------------------|
-     * |   5   |   4   |   3   |   2   |  Ctl  |       |  Alt  |   9   |   8   |   7   |   6   |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [_LOWER] = LAYOUT_ortho_3x11(
-    KC_TAB,  KC_LCBR, KC_UNDS, KC_RBRC, KC_AMPR, _______, KC_RGUI, KC_LBRC, KC_PERC, KC_RBRC, KC_BSPC,
-    KC_BSLS, KC_LPRN, KC_1,    KC_RPRN, KC_HASH, _______, KC_DLR,  KC_LT,   KC_0,    KC_GT,   KC_PIPE,
-    KC_5,    KC_4,    KC_3,    KC_2,    KC_LCTL, _______, KC_RALT, KC_9,    KC_8,    KC_7,    KC_6
-  ),
-  /* Raise
-     * ,---------------------------------------------------------------------------------------.
-     * |   F1  |   F2  |   F3  |   F4  |   F5  |       |   F6  |   F7  |   F8  |   F9  |  F10  |
-     * |---------------------------------------------------------------------------------------|
-     * |  F11  |  F12  |   !   |   -   |   +   |       |   =   |   ;   |   )   |   `   |   ?   |
-     * |------------------------------- -------------------------------------------------------|
-     * |   %   |   $   |   #   |   @   |       |       |       |   (   |   *   |   &   |   ^   |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [_RAISE] = LAYOUT_ortho_3x11(
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
-    KC_F11,  KC_F12,  KC_EXLM, KC_MINS, KC_PLUS, _______, KC_EQL,  KC_SCLN, KC_RPRN, KC_GRV,  KC_QUES,
-    KC_PERC, KC_DLR,  KC_HASH, KC_AT,   _______, _______, _______, KC_LPRN, KC_ASTR, KC_AMPR, KC_CIRC
-  ),
-  /* Union
-     * ,---------------------------------------------------------------------------------------.
-     * | RESET |       |       |       |       |       |       |       |       |       |  Del  |
-     * |---------------------------------------------------------------------------------------|
-     * |       |       |       |       |       |       |       |       |       |       |       |
-     * |---------------------------------------------------------------------------------------|
-     * |       |       |       |       |       |       |       |       |       |       |       |
-     * |---------------------------------------------------------------------------------------|
-     */
-  [_UNION] = LAYOUT_ortho_3x11(
-    RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-  )
-};
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-//planck like tri layer
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  case BEAKL:
-    if (record->event.pressed) {
-      set_single_persistent_default_layer(_BEAKL);
-    }
-    return false;
-    break;
-  case LOWER:
-    if (record->event.pressed) {
-      layer_on(_LOWER);
-      update_tri_layer(_LOWER, _RAISE, _UNION);
-    } else {
-      layer_off(_LOWER);
-      update_tri_layer(_LOWER, _RAISE, _UNION);
-    }
-    return false;
-    break;
-  case RAISE:
-    if (record->event.pressed) {
-      layer_on(_RAISE);
-      update_tri_layer(_LOWER, _RAISE, _UNION);
-    } else {
-      layer_off(_RAISE);
-      update_tri_layer(_LOWER, _RAISE, _UNION);
-    }
-    return false;
-    break;
-  }
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
diff --git a/keyboards/miuni32/keymaps/ki/readme.md b/keyboards/miuni32/keymaps/ki/readme.md
deleted file mode 100644
index 7615d1c6ad..0000000000
--- a/keyboards/miuni32/keymaps/ki/readme.md
+++ /dev/null
@@ -1,4 +0,0 @@
-# A BEAKL9-ish keymap for miuni32
-A major WIP
-Using planck like tri layer switching with a single center control column
-No mousekey support
diff --git a/keyboards/miuni32/keymaps/ki/rules.mk b/keyboards/miuni32/keymaps/ki/rules.mk
deleted file mode 100644
index 15d3cfff2c..0000000000
--- a/keyboards/miuni32/keymaps/ki/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
diff --git a/keyboards/miuni32/miuni32.c b/keyboards/miuni32/miuni32.c
deleted file mode 100644
index 1c1983a564..0000000000
--- a/keyboards/miuni32/miuni32.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#include "miuni32.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
diff --git a/keyboards/miuni32/miuni32.h b/keyboards/miuni32/miuni32.h
deleted file mode 100644
index ff74675450..0000000000
--- a/keyboards/miuni32/miuni32.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef MIUNI32_H
-#define MIUNI32_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
-    K20, K21, K22, K23,      K25, K26, K27, K28, K29, K2A  \
-  ) { \
-  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
-  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
-  { K20, K21, K22, K23, KC_NO, K25, K26, K27, K28, K29, K2A }  \
-}
-
-#define LAYOUT_ortho_3x11( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
-  ) { \
-  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
-  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
-  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }  \
-}
-
-#define LAYOUT_all LAYOUT_ortho_3x11
-
-#endif
diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md
deleted file mode 100644
index 359424151d..0000000000
--- a/keyboards/miuni32/readme.md
+++ /dev/null
@@ -1,14 +0,0 @@
-miuni32
-=======
-
-A compact 30% keyboard.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: miuni32 PCB  
-Hardware Availability: https://bigtuna.io
-
-Make example for this keyboard (after setting up your build environment):
-
-    make miuni32-default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk
deleted file mode 100644
index 1092e50d8c..0000000000
--- a/keyboards/miuni32/rules.mk
+++ /dev/null
@@ -1,67 +0,0 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6