summaryrefslogtreecommitdiff
path: root/keyboards/matrix/noah
diff options
context:
space:
mode:
authoryulei <yuleiz@gmail.com>2019-11-27 23:54:02 +0800
committerMechMerlin <30334081+mechmerlin@users.noreply.github.com>2019-11-27 07:54:02 -0800
commit265c415f5e13b32fd14f06d8af4ae2498ba9059b (patch)
tree95a9820ec26722e42db85b19a8e32ded3da3fb7a /keyboards/matrix/noah
parent2b318ba01b6e504bfe5f300f8459afc849e104b7 (diff)
adding noah keyboard (#7432)
* adding noah keyboard * Update keyboards/matrix/noah/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/matrix/noah/noah.c Co-Authored-By: Drashna Jaelre <drashna@live.com>
Diffstat (limited to 'keyboards/matrix/noah')
-rw-r--r--keyboards/matrix/noah/boards/noah_bd/board.c131
-rw-r--r--keyboards/matrix/noah/boards/noah_bd/board.h1336
-rw-r--r--keyboards/matrix/noah/boards/noah_bd/board.mk5
-rw-r--r--keyboards/matrix/noah/bootloader_defs.h7
-rw-r--r--keyboards/matrix/noah/chconf.h527
-rw-r--r--keyboards/matrix/noah/config.h54
-rw-r--r--keyboards/matrix/noah/eeprom_f4.c822
-rw-r--r--keyboards/matrix/noah/eeprom_f4.h130
-rw-r--r--keyboards/matrix/noah/halconf.h388
-rw-r--r--keyboards/matrix/noah/info.json721
-rw-r--r--keyboards/matrix/noah/keymaps/default/keymap.c20
-rw-r--r--keyboards/matrix/noah/keymaps/splitspace/keymap.c20
-rw-r--r--keyboards/matrix/noah/ld/noah_boot.ld85
-rw-r--r--keyboards/matrix/noah/matrix.c166
-rw-r--r--keyboards/matrix/noah/mcuconf.h268
-rw-r--r--keyboards/matrix/noah/noah.c243
-rw-r--r--keyboards/matrix/noah/noah.h91
-rw-r--r--keyboards/matrix/noah/readme.md19
-rw-r--r--keyboards/matrix/noah/rules.mk57
-rw-r--r--keyboards/matrix/noah/ws2812_f4.c272
-rw-r--r--keyboards/matrix/noah/ws2812_f4.h102
21 files changed, 5464 insertions, 0 deletions
diff --git a/keyboards/matrix/noah/boards/noah_bd/board.c b/keyboards/matrix/noah/boards/noah_bd/board.c
new file mode 100644
index 0000000000..7fd6a60b5f
--- /dev/null
+++ b/keyboards/matrix/noah/boards/noah_bd/board.c
@@ -0,0 +1,131 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+ VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+ VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+ VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+ VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+ VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+ VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+ {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+ VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+ {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+ VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+ {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+ enter_bootloader_mode_if_requested();
+ stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/matrix/noah/boards/noah_bd/board.h b/keyboards/matrix/noah/boards/noah_bd/board.h
new file mode 100644
index 0000000000..37d1d13623
--- /dev/null
+++ b/keyboards/matrix/noah/boards/noah_bd/board.h
@@ -0,0 +1,1336 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for Matrix M65 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_MATRIX_NOAH
+#define BOARD_NAME "Matrix noah65 keyboard"
+#define BOARD_OTG_NOVBUSSENS
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK 0U
+#endif
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK 8000000U
+#endif
+
+//#define STM32_HSE_BYPASS
+
+/*
+ * Board voltages.
+ * Required for performance limits calculation.
+ */
+#define STM32_VDD 300U
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F411xE
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_PIN0 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_SCK 5U
+#define GPIOA_MISO 6U
+#define GPIOA_MOSI 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_OTG_FS_DM 11U
+#define GPIOA_OTG_FS_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_SWO 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_PIN13 13U
+#define GPIOB_PIN14 14U
+#define GPIOB_PIN15 15U
+
+#define GPIOC_PIN0 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_PIN6 6U
+#define GPIOC_PIN7 7U
+#define GPIOC_PIN8 8U
+#define GPIOC_PIN9 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_PIN14 14U
+#define GPIOC_PIN15 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_PIN0 0U
+#define GPIOF_PIN1 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+#define GPIOG_PIN0 0U
+#define GPIOG_PIN1 1U
+#define GPIOG_PIN2 2U
+#define GPIOG_PIN3 3U
+#define GPIOG_PIN4 4U
+#define GPIOG_PIN5 5U
+#define GPIOG_PIN6 6U
+#define GPIOG_PIN7 7U
+#define GPIOG_PIN8 8U
+#define GPIOG_PIN9 9U
+#define GPIOG_PIN10 10U
+#define GPIOG_PIN11 11U
+#define GPIOG_PIN12 12U
+#define GPIOG_PIN13 13U
+#define GPIOG_PIN14 14U
+#define GPIOG_PIN15 15U
+
+#define GPIOH_OSC_IN 0U
+#define GPIOH_OSC_OUT 1U
+#define GPIOH_PIN2 2U
+#define GPIOH_PIN3 3U
+#define GPIOH_PIN4 4U
+#define GPIOH_PIN5 5U
+#define GPIOH_PIN6 6U
+#define GPIOH_PIN7 7U
+#define GPIOH_PIN8 8U
+#define GPIOH_PIN9 9U
+#define GPIOH_PIN10 10U
+#define GPIOH_PIN11 11U
+#define GPIOH_PIN12 12U
+#define GPIOH_PIN13 13U
+#define GPIOH_PIN14 14U
+#define GPIOH_PIN15 15U
+
+#define GPIOI_PIN0 0U
+#define GPIOI_PIN1 1U
+#define GPIOI_PIN2 2U
+#define GPIOI_PIN3 3U
+#define GPIOI_PIN4 4U
+#define GPIOI_PIN5 5U
+#define GPIOI_PIN6 6U
+#define GPIOI_PIN7 7U
+#define GPIOI_PIN8 8U
+#define GPIOI_PIN9 9U
+#define GPIOI_PIN10 10U
+#define GPIOI_PIN11 11U
+#define GPIOI_PIN12 12U
+#define GPIOI_PIN13 13U
+#define GPIOI_PIN14 14U
+#define GPIOI_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_ROW_1 PAL_LINE(GPIOB, 0U)
+#define LINE_ROW_2 PAL_LINE(GPIOA, 1U)
+#define LINE_ROW_3 PAL_LINE(GPIOC, 14U)
+#define LINE_ROW_4 PAL_LINE(GPIOC, 13U)
+#define LINE_ROW_5 PAL_LINE(GPIOA, 0U)
+
+#define LINE_COL_1 PAL_LINE(GPIOC, 15U)
+#define LINE_COL_2 PAL_LINE(GPIOB, 10U)
+#define LINE_COL_3 PAL_LINE(GPIOB, 7U)
+#define LINE_COL_4 PAL_LINE(GPIOB, 6U)
+#define LINE_COL_5 PAL_LINE(GPIOB, 5U)
+#define LINE_COL_6 PAL_LINE(GPIOB, 4U)
+#define LINE_COL_7 PAL_LINE(GPIOA, 15U)
+#define LINE_COL_8 PAL_LINE(GPIOA, 10U)
+#define LINE_COL_9 PAL_LINE(GPIOA, 9U)
+#define LINE_COL_10 PAL_LINE(GPIOA, 8U)
+#define LINE_COL_11 PAL_LINE(GPIOB, 15U)
+#define LINE_COL_12 PAL_LINE(GPIOB, 14U)
+#define LINE_COL_13 PAL_LINE(GPIOB, 13U)
+#define LINE_COL_14 PAL_LINE(GPIOB, 12U)
+#define LINE_COL_15 PAL_LINE(GPIOB, 2U)
+
+// u2u lines
+#define LINE_U2U_RST PAL_LINE(GPIOA, 2U)
+#define LINE_U2U_IRQ PAL_LINE(GPIOA, 3U)
+#define LINE_U2U_CS PAL_LINE(GPIOA, 4U)
+#define LINE_U2U_SCK PAL_LINE(GPIOA, 5U)
+#define LINE_U2U_MISO PAL_LINE(GPIOA, 6U)
+#define LINE_U2U_MOSI PAL_LINE(GPIOA, 7U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0 - (input pullup).
+ * PA1 - (input pullup).
+ * PA2 - (input pullup).
+ * PA3 - (input pullup).
+ * PA4 - (input pullup).
+ * PA5 - SPI SCK (alternate 5).
+ * PA6 - SPI MISO (alternate 5).
+ * PA7 - SPI MOSI (alternate 5).
+ * PA8 - (input pullup).
+ * PA9 - (input pullup).
+ * PA10 - (input pullup).
+ * PA11 - OTG_FS_DM (alternate 10).
+ * PA12 - OTG_FS_DP (alternate 10).
+ * PA13 - SWDIO (alternate 0).
+ * PA14 - SWCLK (alternate 0).
+ * PA15 - (input pullup).
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \
+ PIN_MODE_INPUT(GPIOA_PIN1) | \
+ PIN_MODE_INPUT(GPIOA_PIN2) | \
+ PIN_MODE_INPUT(GPIOA_PIN3) | \
+ PIN_MODE_INPUT(GPIOA_PIN4) | \
+ PIN_MODE_ALTERNATE(GPIOA_SCK) | \
+ PIN_MODE_ALTERNATE(GPIOA_MISO) | \
+ PIN_MODE_ALTERNATE(GPIOA_MOSI) | \
+ PIN_MODE_INPUT(GPIOA_PIN8) | \
+ PIN_MODE_INPUT(GPIOA_PIN9) | \
+ PIN_MODE_INPUT(GPIOA_PIN10) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SCK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_MISO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_MOSI) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOA_SCK) | \
+ PIN_OSPEED_HIGH(GPIOA_MISO) | \
+ PIN_OSPEED_HIGH(GPIOA_MOSI) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | \
+ PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | \
+ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
+ PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOA_SCK) | \
+ PIN_PUPDR_PULLUP(GPIOA_MISO) | \
+ PIN_PUPDR_PULLUP(GPIOA_MOSI) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \
+ PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \
+ PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
+ PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \
+ PIN_ODR_HIGH(GPIOA_PIN1) | \
+ PIN_ODR_HIGH(GPIOA_PIN2) | \
+ PIN_ODR_HIGH(GPIOA_PIN3) | \
+ PIN_ODR_HIGH(GPIOA_PIN4) | \
+ PIN_ODR_HIGH(GPIOA_SCK) | \
+ PIN_ODR_HIGH(GPIOA_MISO) | \
+ PIN_ODR_HIGH(GPIOA_MOSI) | \
+ PIN_ODR_HIGH(GPIOA_PIN8) | \
+ PIN_ODR_HIGH(GPIOA_PIN9) | \
+ PIN_ODR_HIGH(GPIOA_PIN10) | \
+ PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \
+ PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \
+ PIN_ODR_HIGH(GPIOA_SWDIO) | \
+ PIN_ODR_HIGH(GPIOA_SWCLK) | \
+ PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOA_SCK, 5U) | \
+ PIN_AFIO_AF(GPIOA_MISO, 5U) | \
+ PIN_AFIO_AF(GPIOA_MOSI, 5U))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0 - (input pullup).
+ * PB1 - (input pullup).
+ * PB2 - (input pullup).
+ * PB3 - SWO (alternate 0).
+ * PB4 - (input pullup).
+ * PB5 - (input pullup).
+ * PB6 - (input pullup).
+ * PB7 - (input pullup).
+ * PB8 - (input pullup).
+ * PB9 - (input pullup).
+ * PB10 - (input pullup).
+ * PB11 - (input pullup).
+ * PB12 - (input pullup).
+ * PB13 - (input pullup).
+ * PB14 - (input pullup).
+ * PB15 - (input pullup).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_SWO) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_INPUT(GPIOB_PIN6) | \
+ PIN_MODE_INPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_PIN9) | \
+ PIN_MODE_INPUT(GPIOB_PIN10) | \
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOB_SWO) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOB_SWO) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
+ PIN_ODR_HIGH(GPIOB_PIN1) | \
+ PIN_ODR_HIGH(GPIOB_PIN2) | \
+ PIN_ODR_HIGH(GPIOB_SWO) | \
+ PIN_ODR_HIGH(GPIOB_PIN4) | \
+ PIN_ODR_HIGH(GPIOB_PIN5) | \
+ PIN_ODR_HIGH(GPIOB_PIN6) | \
+ PIN_ODR_HIGH(GPIOB_PIN7) | \
+ PIN_ODR_HIGH(GPIOB_PIN8) | \
+ PIN_ODR_HIGH(GPIOB_PIN9) | \
+ PIN_ODR_HIGH(GPIOB_PIN10) | \
+ PIN_ODR_HIGH(GPIOB_PIN11) | \
+ PIN_ODR_HIGH(GPIOB_PIN12) | \
+ PIN_ODR_HIGH(GPIOB_PIN13) | \
+ PIN_ODR_HIGH(GPIOB_PIN14) | \
+ PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOB_SWO, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0 - (input pullup).
+ * PC1 - (input pullup).
+ * PC2 - (input pullup).
+ * PC3 - (input pullup).
+ * PC4 - (input pullup).
+ * PC5 - (input pullup).
+ * PC6 - (input pullup).
+ * PC7 - (input pullup).
+ * PC8 - (input pullup).
+ * PC9 - (input pullup).
+ * PC10 - (input pullup).
+ * PC11 - (input pullup).
+ * PC12 - (input pullup).
+ * PC13 - (input floating).
+ * PC14 - (input floating).
+ * PC15 - (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
+ PIN_MODE_INPUT(GPIOC_PIN1) | \
+ PIN_MODE_INPUT(GPIOC_PIN2) | \
+ PIN_MODE_INPUT(GPIOC_PIN3) | \
+ PIN_MODE_INPUT(GPIOC_PIN4) | \
+ PIN_MODE_INPUT(GPIOC_PIN5) | \
+ PIN_MODE_INPUT(GPIOC_PIN6) | \
+ PIN_MODE_INPUT(GPIOC_PIN7) | \
+ PIN_MODE_INPUT(GPIOC_PIN8) | \
+ PIN_MODE_INPUT(GPIOC_PIN9) | \
+ PIN_MODE_INPUT(GPIOC_PIN10) | \
+ PIN_MODE_INPUT(GPIOC_PIN11) | \
+ PIN_MODE_INPUT(GPIOC_PIN12) | \
+ PIN_MODE_INPUT(GPIOC_PIN13) | \
+ PIN_MODE_INPUT(GPIOC_PIN14) | \
+ PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN15))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
+ PIN_ODR_HIGH(GPIOC_PIN1) | \
+ PIN_ODR_HIGH(GPIOC_PIN2) | \
+ PIN_ODR_HIGH(GPIOC_PIN3) | \
+ PIN_ODR_HIGH(GPIOC_PIN4) | \
+ PIN_ODR_HIGH(GPIOC_PIN5) | \
+ PIN_ODR_HIGH(GPIOC_PIN6) | \
+ PIN_ODR_HIGH(GPIOC_PIN7) | \
+ PIN_ODR_HIGH(GPIOC_PIN8) | \
+ PIN_ODR_HIGH(GPIOC_PIN9) | \
+ PIN_ODR_HIGH(GPIOC_PIN10) | \
+ PIN_ODR_HIGH(GPIOC_PIN11) | \
+ PIN_ODR_HIGH(GPIOC_PIN12) | \
+ PIN_ODR_HIGH(GPIOC_PIN13) | \
+ PIN_ODR_HIGH(GPIOC_PIN14) | \
+ PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN7, 0U))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN15, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0 - PIN0 (input pullup).
+ * PD1 - PIN1 (input pullup).
+ * PD2 - PIN2 (input pullup).
+ * PD3 - PIN3 (input pullup).
+ * PD4 - PIN4 (input pullup).
+ * PD5 - PIN5 (input pullup).
+ * PD6 - PIN6 (input pullup).
+ * PD7 - PIN7 (input pullup).
+ * PD8 - PIN8 (input pullup).
+ * PD9 - PIN9 (input pullup).
+ * PD10 - PIN10 (input pullup).
+ * PD11 - PIN11 (input pullup).
+ * PD12 - PIN12 (input pullup).
+ * PD13 - PIN13 (input pullup).
+ * PD14 - PIN14 (input pullup).
+ * PD15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
+ PIN_MODE_INPUT(GPIOD_PIN1) | \
+ PIN_MODE_INPUT(GPIOD_PIN2) | \
+ PIN_MODE_INPUT(GPIOD_PIN3) | \
+ PIN_MODE_INPUT(GPIOD_PIN4) | \
+ PIN_MODE_INPUT(GPIOD_PIN5) | \
+ PIN_MODE_INPUT(GPIOD_PIN6) | \
+ PIN_MODE_INPUT(GPIOD_PIN7) | \
+ PIN_MODE_INPUT(GPIOD_PIN8) | \
+ PIN_MODE_INPUT(GPIOD_PIN9) | \
+ PIN_MODE_INPUT(GPIOD_PIN10) | \
+ PIN_MODE_INPUT(GPIOD_PIN11) | \
+ PIN_MODE_INPUT(GPIOD_PIN12) | \
+ PIN_MODE_INPUT(GPIOD_PIN13) | \
+ PIN_MODE_INPUT(GPIOD_PIN14) | \
+ PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
+ PIN_ODR_HIGH(GPIOD_PIN1) | \
+ PIN_ODR_HIGH(GPIOD_PIN2) | \
+ PIN_ODR_HIGH(GPIOD_PIN3) | \
+ PIN_ODR_HIGH(GPIOD_PIN4) | \
+ PIN_ODR_HIGH(GPIOD_PIN5) | \
+ PIN_ODR_HIGH(GPIOD_PIN6) | \
+ PIN_ODR_HIGH(GPIOD_PIN7) | \
+ PIN_ODR_HIGH(GPIOD_PIN8) | \
+ PIN_ODR_HIGH(GPIOD_PIN9) | \
+ PIN_ODR_HIGH(GPIOD_PIN10) | \
+ PIN_ODR_HIGH(GPIOD_PIN11) | \
+ PIN_ODR_HIGH(GPIOD_PIN12) | \
+ PIN_ODR_HIGH(GPIOD_PIN13) | \
+ PIN_ODR_HIGH(GPIOD_PIN14) | \
+ PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0 - PIN0 (input pullup).
+ * PE1 - PIN1 (input pullup).
+ * PE2 - PIN2 (input pullup).
+ * PE3 - PIN3 (input pullup).
+ * PE4 - PIN4 (input pullup).
+ * PE5 - PIN5 (input pullup).
+ * PE6 - PIN6 (input pullup).
+ * PE7 - PIN7 (input pullup).
+ * PE8 - PIN8 (input pullup).
+ * PE9 - PIN9 (input pullup).
+ * PE10 - PIN10 (input pullup).
+ * PE11 - PIN11 (input pullup).
+ * PE12 - PIN12 (input pullup).
+ * PE13 - PIN13 (input pullup).
+ * PE14 - PIN14 (input pullup).
+ * PE15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
+ PIN_MODE_INPUT(GPIOE_PIN1) | \
+ PIN_MODE_INPUT(GPIOE_PIN2) | \
+ PIN_MODE_INPUT(GPIOE_PIN3) | \
+ PIN_MODE_INPUT(GPIOE_PIN4) | \
+ PIN_MODE_INPUT(GPIOE_PIN5) | \
+ PIN_MODE_INPUT(GPIOE_PIN6) | \
+ PIN_MODE_INPUT(GPIOE_PIN7) | \
+ PIN_MODE_INPUT(GPIOE_PIN8) | \
+ PIN_MODE_INPUT(GPIOE_PIN9) | \
+ PIN_MODE_INPUT(GPIOE_PIN10) | \
+ PIN_MODE_INPUT(GPIOE_PIN11) | \
+ PIN_MODE_INPUT(GPIOE_PIN12) | \
+ PIN_MODE_INPUT(GPIOE_PIN13) | \
+ PIN_MODE_INPUT(GPIOE_PIN14) | \
+ PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
+ PIN_ODR_HIGH(GPIOE_PIN1) | \
+ PIN_ODR_HIGH(GPIOE_PIN2) | \
+ PIN_ODR_HIGH(GPIOE_PIN3) | \
+ PIN_ODR_HIGH(GPIOE_PIN4) | \
+ PIN_ODR_HIGH(GPIOE_PIN5) | \
+ PIN_ODR_HIGH(GPIOE_PIN6) | \
+ PIN_ODR_HIGH(GPIOE_PIN7) | \
+ PIN_ODR_HIGH(GPIOE_PIN8) | \
+ PIN_ODR_HIGH(GPIOE_PIN9) | \
+ PIN_ODR_HIGH(GPIOE_PIN10) | \
+ PIN_ODR_HIGH(GPIOE_PIN11) | \
+ PIN_ODR_HIGH(GPIOE_PIN12) | \
+ PIN_ODR_HIGH(GPIOE_PIN13) | \
+ PIN_ODR_HIGH(GPIOE_PIN14) | \
+ PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0 - PIN0 (input pullup).
+ * PF1 - PIN1 (input pullup).
+ * PF2 - PIN2 (input pullup).
+ * PF3 - PIN3 (input pullup).
+ * PF4 - PIN4 (input pullup).
+ * PF5 - PIN5 (input pullup).
+ * PF6 - PIN6 (input pullup).
+ * PF7 - PIN7 (input pullup).
+ * PF8 - PIN8 (input pullup).
+ * PF9 - PIN9 (input pullup).
+ * PF10 - PIN10 (input pullup).
+ * PF11 - PIN11 (input pullup).
+ * PF12 - PIN12 (input pullup).
+ * PF13 - PIN13 (input pullup).
+ * PF14 - PIN14 (input pullup).
+ * PF15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \
+ PIN_MODE_INPUT(GPIOF_PIN1) | \
+ PIN_MODE_INPUT(GPIOF_PIN2) | \
+ PIN_MODE_INPUT(GPIOF_PIN3) | \
+ PIN_MODE_INPUT(GPIOF_PIN4) | \
+ PIN_MODE_INPUT(GPIOF_PIN5) | \
+ PIN_MODE_INPUT(GPIOF_PIN6) | \
+ PIN_MODE_INPUT(GPIOF_PIN7) | \
+ PIN_MODE_INPUT(GPIOF_PIN8) | \
+ PIN_MODE_INPUT(GPIOF_PIN9) | \
+ PIN_MODE_INPUT(GPIOF_PIN10) | \
+ PIN_MODE_INPUT(GPIOF_PIN11) | \
+ PIN_MODE_INPUT(GPIOF_PIN12) | \
+ PIN_MODE_INPUT(GPIOF_PIN13) | \
+ PIN_MODE_INPUT(GPIOF_PIN14) | \
+ PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \
+ PIN_ODR_HIGH(GPIOF_PIN1) | \
+ PIN_ODR_HIGH(GPIOF_PIN2) | \
+ PIN_ODR_HIGH(GPIOF_PIN3) | \
+ PIN_ODR_HIGH(GPIOF_PIN4) | \
+ PIN_ODR_HIGH(GPIOF_PIN5) | \
+ PIN_ODR_HIGH(GPIOF_PIN6) | \
+ PIN_ODR_HIGH(GPIOF_PIN7) | \
+ PIN_ODR_HIGH(GPIOF_PIN8) | \
+ PIN_ODR_HIGH(GPIOF_PIN9) | \
+ PIN_ODR_HIGH(GPIOF_PIN10) | \
+ PIN_ODR_HIGH(GPIOF_PIN11) | \
+ PIN_ODR_HIGH(GPIOF_PIN12) | \
+ PIN_ODR_HIGH(GPIOF_PIN13) | \
+ PIN_ODR_HIGH(GPIOF_PIN14) | \
+ PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+/*
+ * GPIOG setup:
+ *
+ * PG0 - PIN0 (input pullup).
+ * PG1 - PIN1 (input pullup).
+ * PG2 - PIN2 (input pullup).
+ * PG3 - PIN3 (input pullup).
+ * PG4 - PIN4 (input pullup).
+ * PG5 - PIN5 (input pullup).
+ * PG6 - PIN6 (input pullup).
+ * PG7 - PIN7 (input pullup).
+ * PG8 - PIN8 (input pullup).
+ * PG9 - PIN9 (input pullup).
+ * PG10 - PIN10 (input pullup).
+ * PG11 - PIN11 (input pullup).
+ * PG12 - PIN12 (input pullup).
+ * PG13 - PIN13 (input pullup).
+ * PG14 - PIN14 (input pullup).
+ * PG15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
+ PIN_MODE_INPUT(GPIOG_PIN1) | \
+ PIN_MODE_INPUT(GPIOG_PIN2) | \
+ PIN_MODE_INPUT(GPIOG_PIN3) | \
+ PIN_MODE_INPUT(GPIOG_PIN4) | \
+ PIN_MODE_INPUT(GPIOG_PIN5) | \
+ PIN_MODE_INPUT(GPIOG_PIN6) | \
+ PIN_MODE_INPUT(GPIOG_PIN7) | \
+ PIN_MODE_INPUT(GPIOG_PIN8) | \
+ PIN_MODE_INPUT(GPIOG_PIN9) | \
+ PIN_MODE_INPUT(GPIOG_PIN10) | \
+ PIN_MODE_INPUT(GPIOG_PIN11) | \
+ PIN_MODE_INPUT(GPIOG_PIN12) | \
+ PIN_MODE_INPUT(GPIOG_PIN13) | \
+ PIN_MODE_INPUT(GPIOG_PIN14) | \
+ PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
+ PIN_ODR_HIGH(GPIOG_PIN1) | \
+ PIN_ODR_HIGH(GPIOG_PIN2) | \
+ PIN_ODR_HIGH(GPIOG_PIN3) | \
+ PIN_ODR_HIGH(GPIOG_PIN4) | \
+ PIN_ODR_HIGH(GPIOG_PIN5) | \
+ PIN_ODR_HIGH(GPIOG_PIN6) | \
+ PIN_ODR_HIGH(GPIOG_PIN7) | \
+ PIN_ODR_HIGH(GPIOG_PIN8) | \
+ PIN_ODR_HIGH(GPIOG_PIN9) | \
+ PIN_ODR_HIGH(GPIOG_PIN10) | \
+ PIN_ODR_HIGH(GPIOG_PIN11) | \
+ PIN_ODR_HIGH(GPIOG_PIN12) | \
+ PIN_ODR_HIGH(GPIOG_PIN13) | \
+ PIN_ODR_HIGH(GPIOG_PIN14) | \
+ PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN7, 0U))
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOG_PIN15, 0U))
+
+/*
+ * GPIOH setup:
+ *
+ * PH0 - OSC_IN (input floating).
+ * PH1 - OSC_OUT (input floating).
+ * PH2 - PIN2 (input pullup).
+ * PH3 - PIN3 (input pullup).
+ * PH4 - PIN4 (input pullup).
+ * PH5 - PIN5 (input pullup).
+ * PH6 - PIN6 (input pullup).
+ * PH7 - PIN7 (input pullup).
+ * PH8 - PIN8 (input pullup).
+ * PH9 - PIN9 (input pullup).
+ * PH10 - PIN10 (input pullup).
+ * PH11 - PIN11 (input pullup).
+ * PH12 - PIN12 (input pullup).
+ * PH13 - PIN13 (input pullup).
+ * PH14 - PIN14 (input pullup).
+ * PH15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
+ PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
+ PIN_MODE_INPUT(GPIOH_PIN2) | \
+ PIN_MODE_INPUT(GPIOH_PIN3) | \
+ PIN_MODE_INPUT(GPIOH_PIN4) | \
+ PIN_MODE_INPUT(GPIOH_PIN5) | \
+ PIN_MODE_INPUT(GPIOH_PIN6) | \
+ PIN_MODE_INPUT(GPIOH_PIN7) | \
+ PIN_MODE_INPUT(GPIOH_PIN8) | \
+ PIN_MODE_INPUT(GPIOH_PIN9) | \
+ PIN_MODE_INPUT(GPIOH_PIN10) | \
+ PIN_MODE_INPUT(GPIOH_PIN11) | \
+ PIN_MODE_INPUT(GPIOH_PIN12) | \
+ PIN_MODE_INPUT(GPIOH_PIN13) | \
+ PIN_MODE_INPUT(GPIOH_PIN14) | \
+ PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | \
+ PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \
+ PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \
+ PIN_ODR_HIGH(GPIOH_OSC_OUT) | \
+ PIN_ODR_HIGH(GPIOH_PIN2) | \
+ PIN_ODR_HIGH(GPIOH_PIN3) | \
+ PIN_ODR_HIGH(GPIOH_PIN4) | \
+ PIN_ODR_HIGH(GPIOH_PIN5) | \
+ PIN_ODR_HIGH(GPIOH_PIN6) | \
+ PIN_ODR_HIGH(GPIOH_PIN7) | \
+ PIN_ODR_HIGH(GPIOH_PIN8) | \
+ PIN_ODR_HIGH(GPIOH_PIN9) | \
+ PIN_ODR_HIGH(GPIOH_PIN10) | \
+ PIN_ODR_HIGH(GPIOH_PIN11) | \
+ PIN_ODR_HIGH(GPIOH_PIN12) | \
+ PIN_ODR_HIGH(GPIOH_PIN13) | \
+ PIN_ODR_HIGH(GPIOH_PIN14) | \
+ PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | \
+ PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN7, 0U))
+#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOH_PIN15, 0U))
+
+/*
+ * GPIOI setup:
+ *
+ * PI0 - PIN0 (input pullup).
+ * PI1 - PIN1 (input pullup).
+ * PI2 - PIN2 (input pullup).
+ * PI3 - PIN3 (input pullup).
+ * PI4 - PIN4 (input pullup).
+ * PI5 - PIN5 (input pullup).
+ * PI6 - PIN6 (input pullup).
+ * PI7 - PIN7 (input pullup).
+ * PI8 - PIN8 (input pullup).
+ * PI9 - PIN9 (input pullup).
+ * PI10 - PIN10 (input pullup).
+ * PI11 - PIN11 (input pullup).
+ * PI12 - PIN12 (input pullup).
+ * PI13 - PIN13 (input pullup).
+ * PI14 - PIN14 (input pullup).
+ * PI15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \
+ PIN_MODE_INPUT(GPIOI_PIN1) | \
+ PIN_MODE_INPUT(GPIOI_PIN2) | \
+ PIN_MODE_INPUT(GPIOI_PIN3) | \
+ PIN_MODE_INPUT(GPIOI_PIN4) | \
+ PIN_MODE_INPUT(GPIOI_PIN5) | \
+ PIN_MODE_INPUT(GPIOI_PIN6) | \
+ PIN_MODE_INPUT(GPIOI_PIN7) | \
+ PIN_MODE_INPUT(GPIOI_PIN8) | \
+ PIN_MODE_INPUT(GPIOI_PIN9) | \
+ PIN_MODE_INPUT(GPIOI_PIN10) | \
+ PIN_MODE_INPUT(GPIOI_PIN11) | \
+ PIN_MODE_INPUT(GPIOI_PIN12) | \
+ PIN_MODE_INPUT(GPIOI_PIN13) | \
+ PIN_MODE_INPUT(GPIOI_PIN14) | \
+ PIN_MODE_INPUT(GPIOI_PIN15))
+#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
+#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN4) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN6) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOI_PIN15))
+#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOI_PIN15))
+#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \
+ PIN_ODR_HIGH(GPIOI_PIN1) | \
+ PIN_ODR_HIGH(GPIOI_PIN2) | \
+ PIN_ODR_HIGH(GPIOI_PIN3) | \
+ PIN_ODR_HIGH(GPIOI_PIN4) | \
+ PIN_ODR_HIGH(GPIOI_PIN5) | \
+ PIN_ODR_HIGH(GPIOI_PIN6) | \
+ PIN_ODR_HIGH(GPIOI_PIN7) | \
+ PIN_ODR_HIGH(GPIOI_PIN8) | \
+ PIN_ODR_HIGH(GPIOI_PIN9) | \
+ PIN_ODR_HIGH(GPIOI_PIN10) | \
+ PIN_ODR_HIGH(GPIOI_PIN11) | \
+ PIN_ODR_HIGH(GPIOI_PIN12) | \
+ PIN_ODR_HIGH(GPIOI_PIN13) | \
+ PIN_ODR_HIGH(GPIOI_PIN14) | \
+ PIN_ODR_HIGH(GPIOI_PIN15))
+#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN7, 0U))
+#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOI_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */
diff --git a/keyboards/matrix/noah/boards/noah_bd/board.mk b/keyboards/matrix/noah/boards/noah_bd/board.mk
new file mode 100644
index 0000000000..e4cd10acfc
--- /dev/null
+++ b/keyboards/matrix/noah/boards/noah_bd/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/noah_bd
diff --git a/keyboards/matrix/noah/bootloader_defs.h b/keyboards/matrix/noah/bootloader_defs.h
new file mode 100644
index 0000000000..20b8f73e6f
--- /dev/null
+++ b/keyboards/matrix/noah/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h
new file mode 100644
index 0000000000..228a0827d8
--- /dev/null
+++ b/keyboards/matrix/noah/chconf.h
@@ -0,0 +1,527 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+#define ARM_WFI_IMPL __WFI
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/matrix/noah/config.h b/keyboards/matrix/noah/config.h
new file mode 100644
index 0000000000..a5a77067a6
--- /dev/null
+++ b/keyboards/matrix/noah/config.h
@@ -0,0 +1,54 @@
+/**
+ * config.h
+ *
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4D58 // MX
+#define PRODUCT_ID 0x0065 // noah 65
+#define DEVICE_VER 0x0001
+#define MANUFACTURER matrix
+#define PRODUCT NOAH
+#define DESCRIPTION 65% keybaord of the Matrix abel family
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCING_DELAY 5
+
+// i2c setting
+#define USE_I2CV1
+#define I2C1_SCL 8
+#define I2C1_SDA 9
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN)
+
+// rgb matrix setting
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110110
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 36
+#define DRIVER_2_LED_TOTAL 36
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+
+/* indicator rgb */
+#define WS2812_LED_N 7
+#define RGBLED_NUM WS2812_LED_N
+#define WS2812_TIM_N 3
+#define WS2812_TIM_CH 3
+#define PORT_WS2812 GPIOB
+#define PIN_WS2812 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+#define WS2812_DMA_CHANNEL 5 // DMA channel for TIMx_UP
+#define RGBLIGHT_ANIMATIONS
+//#define WS2812_EXTERNAL_PULLUP
+
+// tapping setting
+#define TAPPING_TERM 200
+#define RETRO_TAPPING
+#define PERMISSIVE_HOLD
diff --git a/keyboards/matrix/noah/eeprom_f4.c b/keyboards/matrix/noah/eeprom_f4.c
new file mode 100644
index 0000000000..3333d7d939
--- /dev/null
+++ b/keyboards/matrix/noah/eeprom_f4.c
@@ -0,0 +1,822 @@
+/**
+ ******************************************************************************
+ * @file EEPROM/EEPROM_Emulation/src/eeprom.c
+ * @author MCD Application Team
+ * @brief This file provides all the EEPROM emulation firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright ďż˝ 2017 STMicroelectronics International N.V.
+ * All rights reserved.</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/** @addtogroup EEPROM_Emulation
+ * @{
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "eeprom_f4.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Global variable used to store variable value in read sequence */
+uint16_t DataVar = 0;
+
+/* Virtual address defined by the user: 0xFFFF value is prohibited */
+extern uint16_t VirtAddVarTab[NB_OF_VAR];
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef EE_Format(void);
+static uint16_t EE_FindValidPage(uint8_t Operation);
+static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data);
+static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data);
+static uint16_t EE_VerifyPageFullyErased(uint32_t Address);
+
+/**
+ * @brief Restore the pages to a known good state in case of page's status
+ * corruption after a power loss.
+ * @param None.
+ * @retval - Flash error code: on write Flash error
+ * - FLASH_COMPLETE: on success
+ */
+uint16_t EE_Init(void)
+{
+ uint16_t PageStatus0 = 6, PageStatus1 = 6;
+ uint16_t VarIdx = 0;
+ uint16_t EepromStatus = 0, ReadStatus = 0;
+ int16_t x = -1;
+ HAL_StatusTypeDef FlashStatus;
+
+ FLASH_UnlockF4();
+
+ /* Get Page0 status */
+ PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS);
+ /* Get Page1 status */
+ PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
+
+ /* Check for invalid header states and repair if necessary */
+ switch (PageStatus0)
+ {
+ case ERASED:
+ if (PageStatus1 == VALID_PAGE) /* Page0 erased, Page1 valid */
+ {
+ /* Erase Page0 */
+ if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ }
+ else if (PageStatus1 == RECEIVE_DATA) /* Page0 erased, Page1 receive */
+ {
+ /* Erase Page0 */
+ if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ /* Mark Page1 as valid */
+ FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ else /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */
+ {
+ /* Erase both Page0 and Page1 and set Page0 as valid page */
+ FlashStatus = EE_Format();
+ /* If erase/program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ break;
+
+ case RECEIVE_DATA:
+ if (PageStatus1 == VALID_PAGE) /* Page0 receive, Page1 valid */
+ {
+ /* Transfer data from Page1 to Page0 */
+ for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
+ {
+ if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
+ {
+ x = VarIdx;
+ }
+ if (VarIdx != x)
+ {
+ /* Read the last variables' updates */
+ ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
+ /* In case variable corresponding to the virtual address was found */
+ if (ReadStatus != 0x1)
+ {
+ /* Transfer the variable to the Page0 */
+ EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
+ /* If program operation was failed, a Flash error code is returned */
+ if (EepromStatus != HAL_OK)
+ {
+ return EepromStatus;
+ }
+ }
+ }
+ }
+ /* Mark Page0 as valid */
+ FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ /* Erase Page1 */
+ if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ }
+ else if (PageStatus1 == ERASED) /* Page0 receive, Page1 erased */
+ {
+ /* Erase Page1 */
+ if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ /* Mark Page0 as valid */
+ FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ else /* Invalid state -> format eeprom */
+ {
+ /* Erase both Page0 and Page1 and set Page0 as valid page */
+ FlashStatus = EE_Format();
+ /* If erase/program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ break;
+
+ case VALID_PAGE:
+ if (PageStatus1 == VALID_PAGE) /* Invalid state -> format eeprom */
+ {
+ /* Erase both Page0 and Page1 and set Page0 as valid page */
+ FlashStatus = EE_Format();
+ /* If erase/program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ else if (PageStatus1 == ERASED) /* Page0 valid, Page1 erased */
+ {
+ /* Erase Page1 */
+ if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ }
+ else /* Page0 valid, Page1 receive */
+ {
+ /* Transfer data from Page0 to Page1 */
+ for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
+ {
+ if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
+ {
+ x = VarIdx;
+ }
+ if (VarIdx != x)
+ {
+ /* Read the last variables' updates */
+ ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
+ /* In case variable corresponding to the virtual address was found */
+ if (ReadStatus != 0x1)
+ {
+ /* Transfer the variable to the Page1 */
+ EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
+ /* If program operation was failed, a Flash error code is returned */
+ if (EepromStatus != HAL_OK)
+ {
+ return EepromStatus;
+ }
+ }
+ }
+ }
+ /* Mark Page1 as valid */
+ FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ /* Erase Page0 */
+ if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ }
+ break;
+
+ default: /* Any other state -> format eeprom */
+ /* Erase both Page0 and Page1 and set Page0 as valid page */
+ FlashStatus = EE_Format();
+ /* If erase/program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ break;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Verify if specified page is fully erased.
+ * @param Address: page address
+ * This parameter can be one of the following values:
+ * @arg PAGE0_BASE_ADDRESS: Page0 base address
+ * @arg PAGE1_BASE_ADDRESS: Page1 base address
+ * @retval page fully erased status:
+ * - 0: if Page not erased
+ * - 1: if Page erased
+ */
+uint16_t EE_VerifyPageFullyErased(uint32_t Address)
+{
+ uint32_t ReadStatus = 1;
+ uint16_t AddressValue = 0x5555;
+
+ /* Check each active page address starting from end */
+ while (Address <= PAGE0_END_ADDRESS)
+ {
+ /* Get the current location content to be compared with virtual address */
+ AddressValue = (*(__IO uint16_t*)Address);
+
+ /* Compare the read address with the virtual address */
+ if (AddressValue != ERASED)
+ {
+
+ /* In case variable value is read, reset ReadStatus flag */
+ ReadStatus = 0;
+
+ break;
+ }
+ /* Next address location */
+ Address = Address + 4;
+ }
+
+ /* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */
+ return ReadStatus;
+}
+
+/**
+ * @brief Returns the last stored variable data, if found, which correspond to
+ * the passed virtual address
+ * @param VirtAddress: Variable virtual address
+ * @param Data: Global variable contains the read variable value
+ * @retval Success or error status:
+ * - 0: if variable was found
+ * - 1: if the variable was not found
+ * - NO_VALID_PAGE: if no valid page was found.
+ */
+uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data)
+{
+ uint16_t ValidPage = PAGE0;
+ uint16_t AddressValue = 0x5555, ReadStatus = 1;
+ uint32_t Address = EEPROM_START_ADDRESS, PageStartAddress = EEPROM_START_ADDRESS;
+
+ /* Get active Page for read operation */
+ ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
+
+ /* Check if there is no valid page */
+ if (ValidPage == NO_VALID_PAGE)
+ {
+ return NO_VALID_PAGE;
+ }
+
+ /* Get the valid Page start Address */
+ PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
+
+ /* Get the valid Page end Address */
+ Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE));
+
+ /* Check each active page address starting from end */
+ while (Address > (PageStartAddress + 2))
+ {
+ /* Get the current location content to be compared with virtual address */
+ AddressValue = (*(__IO uint16_t*)Address);
+
+ /* Compare the read address with the virtual address */
+ if (AddressValue == VirtAddress)
+ {
+ /* Get content of Address-2 which is variable value */
+ *Data = (*(__IO uint16_t*)(Address - 2));
+
+ /* In case variable value is read, reset ReadStatus flag */
+ ReadStatus = 0;
+
+ break;
+ }
+ else
+ {
+ /* Next address location */
+ Address = Address - 4;
+ }
+ }
+
+ /* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */
+ return ReadStatus;
+}
+
+/**
+ * @brief Writes/upadtes variable data in EEPROM.
+ * @param VirtAddress: Variable virtual address
+ * @param Data: 16 bit data to be written
+ * @retval Success or error status:
+ * - FLASH_COMPLETE: on success
+ * - PAGE_FULL: if valid page is full
+ * - NO_VALID_PAGE: if no valid page was found
+ * - Flash error code: on write Flash error
+ */
+uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data)
+{
+ uint16_t Status = 0;
+
+ /* Write the variable virtual address and value in the EEPROM */
+ Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
+
+ /* In case the EEPROM active page is full */
+ if (Status == PAGE_FULL)
+ {
+ /* Perform Page transfer */
+ Status = EE_PageTransfer(VirtAddress, Data);
+ }
+
+ /* Return last operation status */
+ return Status;
+}
+
+/**
+ * @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE
+ * @param None
+ * @retval Status of the last operation (Flash write or erase) done during
+ * EEPROM formating
+ */
+static HAL_StatusTypeDef EE_Format(void)
+{
+ HAL_StatusTypeDef FlashStatus = HAL_OK;
+
+ /* Erase Page0 */
+ if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+ /* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */
+ FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+
+ /* Erase Page1 */
+ if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
+ {
+ FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Find valid Page for write or read operation
+ * @param Operation: operation to achieve on the valid page.
+ * This parameter can be one of the following values:
+ * @arg READ_FROM_VALID_PAGE: read operation from valid page
+ * @arg WRITE_IN_VALID_PAGE: write operation from valid page
+ * @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case
+ * of no valid page was found
+ */
+static uint16_t EE_FindValidPage(uint8_t Operation)
+{
+ uint16_t PageStatus0 = 6, PageStatus1 = 6;
+
+ /* Get Page0 actual status */
+ PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS);
+
+ /* Get Page1 actual status */
+ PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
+
+ /* Write or read operation */
+ switch (Operation)
+ {
+ case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */
+ if (PageStatus1 == VALID_PAGE)
+ {
+ /* Page0 receiving data */
+ if (PageStatus0 == RECEIVE_DATA)
+ {
+ return PAGE0; /* Page0 valid */
+ }
+ else
+ {
+ return PAGE1; /* Page1 valid */
+ }
+ }
+ else if (PageStatus0 == VALID_PAGE)
+ {
+ /* Page1 receiving data */
+ if (PageStatus1 == RECEIVE_DATA)
+ {
+ return PAGE1; /* Page1 valid */
+ }
+ else
+ {
+ return PAGE0; /* Page0 valid */
+ }
+ }
+ else
+ {
+ return NO_VALID_PAGE; /* No valid Page */
+ }
+
+ case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */
+ if (PageStatus0 == VALID_PAGE)
+ {
+ return PAGE0; /* Page0 valid */
+ }
+ else if (PageStatus1 == VALID_PAGE)
+ {
+ return PAGE1; /* Page1 valid */
+ }
+ else
+ {
+ return NO_VALID_PAGE ; /* No valid Page */
+ }
+
+ default:
+ return PAGE0; /* Page0 valid */
+ }
+}
+
+/**
+ * @brief Verify if active page is full and Writes variable in EEPROM.
+ * @param VirtAddress: 16 bit virtual address of the variable
+ * @param Data: 16 bit data to be written as variable value
+ * @retval Success or error status:
+ * - FLASH_COMPLETE: on success
+ * - PAGE_FULL: if valid page is full
+ * - NO_VALID_PAGE: if no valid page was found
+ * - Flash error code: on write Flash error
+ */
+static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data)
+{
+ HAL_StatusTypeDef FlashStatus = HAL_OK;
+ uint16_t ValidPage = PAGE0;
+ uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE;
+
+ /* Get valid Page for write operation */
+ ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
+
+ /* Check if there is no valid page */
+ if (ValidPage == NO_VALID_PAGE)
+ {
+ return NO_VALID_PAGE;
+ }
+
+ /* Get the valid Page start Address */
+ Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
+
+ /* Get the valid Page end Address */
+ PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((ValidPage + 1) * PAGE_SIZE));
+
+ /* Check each active page address starting from begining */
+ while (Address < PageEndAddress)
+ {
+ /* Verify if Address and Address+2 contents are 0xFFFFFFFF */
+ if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF)
+ {
+ /* Set variable data */
+ FlashStatus = FLASH_ProgramHalfWordF4(Address, Data);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+ /* Set variable virtual address */
+ FlashStatus = FLASH_ProgramHalfWordF4(Address + 2, VirtAddress);
+ /* Return program operation status */
+ return FlashStatus;
+ }
+ else
+ {
+ /* Next address location */
+ Address = Address + 4;
+ }
+ }
+
+ /* Return PAGE_FULL in case the valid page is full */
+ return PAGE_FULL;
+}
+
+/**
+ * @brief Transfers last updated variables data from the full Page to
+ * an empty one.
+ * @param VirtAddress: 16 bit virtual address of the variable
+ * @param Data: 16 bit data to be written as variable value
+ * @retval Success or error status:
+ * - FLASH_COMPLETE: on success
+ * - PAGE_FULL: if valid page is full
+ * - NO_VALID_PAGE: if no valid page was found
+ * - Flash error code: on write Flash error
+ */
+static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
+{
+ HAL_StatusTypeDef FlashStatus = HAL_OK;
+ uint32_t NewPageAddress = EEPROM_START_ADDRESS;
+ uint16_t OldPageId=0;
+ uint16_t ValidPage = PAGE0, VarIdx = 0;
+ uint16_t EepromStatus = 0, ReadStatus = 0;
+
+ /* Get active Page for read operation */
+ ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
+
+ if (ValidPage == PAGE1) /* Page1 valid */
+ {
+ /* New page address where variable will be moved to */
+ NewPageAddress = PAGE0_BASE_ADDRESS;
+
+ /* Old page ID where variable will be taken from */
+ OldPageId = PAGE1_ID;
+ }
+ else if (ValidPage == PAGE0) /* Page0 valid */
+ {
+ /* New page address where variable will be moved to */
+ NewPageAddress = PAGE1_BASE_ADDRESS;
+
+ /* Old page ID where variable will be taken from */
+ OldPageId = PAGE0_ID;
+ }
+ else
+ {
+ return NO_VALID_PAGE; /* No valid Page */
+ }
+
+ /* Set the new Page status to RECEIVE_DATA status */
+ FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, RECEIVE_DATA);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+
+ /* Write the variable passed as parameter in the new active page */
+ EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
+ /* If program operation was failed, a Flash error code is returned */
+ if (EepromStatus != HAL_OK)
+ {
+ return EepromStatus;
+ }
+
+ /* Transfer process: transfer variables from old to the new active page */
+ for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
+ {
+ if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */
+ {
+ /* Read the other last variable updates */
+ ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
+ /* In case variable corresponding to the virtual address was found */
+ if (ReadStatus != 0x1)
+ {
+ /* Transfer the variable to the new active page */
+ EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
+ /* If program operation was failed, a Flash error code is returned */
+ if (EepromStatus != HAL_OK)
+ {
+ return EepromStatus;
+ }
+ }
+ }
+ }
+
+ /* Erase the old Page: Set old Page status to ERASED status */
+ FlashStatus = FLASH_EraseSectorF4(OldPageId);
+ /* If erase operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+
+ /* Set new Page status to VALID_PAGE status */
+ FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, VALID_PAGE);
+ /* If program operation was failed, a Flash error code is returned */
+ if (FlashStatus != HAL_OK)
+ {
+ return FlashStatus;
+ }
+
+ /* Return last operation flash status */
+ return FlashStatus;
+}
+
+/* flash operation */
+
+#define EraseTimeout ((uint32_t)0x00000FFF)
+#define ProgramTimeout ((uint32_t)0x0000001F)
+
+#define FLASH_PSIZE_BYTE 0
+#define FLASH_PSIZE_HFWORD FLASH_CR_PSIZE_0
+#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1
+#define FLASH_CR_SNB_Pos 3
+#define FLASH_KEY1_F4 0x45670123
+#define FLASH_KEY2_F4 0xCDEF89AB
+
+#define ASSERT(exp) (void)((0))
+
+static void Flash_Delay(void)
+{
+ __IO uint32_t i = 0;
+ for(i = 0xFF; i != 0; i--) { }
+}
+
+static HAL_StatusTypeDef FLASH_GetStatus(void)
+{
+ if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY)
+ return HAL_BUSY;
+
+ if ((FLASH->SR & (FLASH_SR_PGSERR|FLASH_SR_PGPERR|FLASH_SR_PGAERR)) != 0)
+ return HAL_ERROR;
+
+ if ((FLASH->SR & FLASH_SR_WRPERR) != 0 )
+ return HAL_ERROR;
+
+ if ((FLASH->SR & FLASH_SR_SOP) != 0 )
+ return HAL_ERROR;
+
+ return HAL_OK;
+}
+
+static HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t timeout)
+{
+ /* Check for the Flash Status */
+ HAL_StatusTypeDef status = FLASH_GetStatus();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while ((status == HAL_BUSY) && (timeout != 0x00))
+ {
+ Flash_Delay();
+ status = FLASH_GetStatus();
+ timeout--;
+ }
+ if (timeout == 0)
+ status = HAL_TIMEOUT;
+
+ return status;
+}
+HAL_StatusTypeDef FLASH_UnlockF4(void)
+{
+ FLASH->KEYR = FLASH_KEY1_F4;
+ FLASH->KEYR = FLASH_KEY2_F4;
+ return HAL_OK;
+}
+
+HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == HAL_OK) {
+ /* if the previous operation is completed, proceed to erase the page */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_PSIZE_WORD;
+ CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
+ FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos);
+ FLASH->CR |= FLASH_CR_STRT;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status != HAL_TIMEOUT)
+ {
+ /* if the erase operation is completed, disable the PER Bit */
+ FLASH->CR &= ~FLASH_CR_SNB;
+ FLASH->CR &= ~FLASH_CR_SER;
+ }
+
+ FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_WRPERR);
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ if (IS_FLASH_ADDRESS(address))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status == HAL_OK) {
+ // set size to byte
+ FLASH->CR &= ~FLASH_CR_PSIZE;
+ FLASH->CR |= FLASH_PSIZE_HFWORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint16_t*)address = data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != HAL_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the PG Bit */
+ FLASH->CR &= ~FLASH_CR_PG;
+ }
+ FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR | FLASH_SR_WRPERR);
+ }
+ }
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2017 STMicroelectronics *****END OF FILE****/
diff --git a/keyboards/matrix/noah/eeprom_f4.h b/keyboards/matrix/noah/eeprom_f4.h
new file mode 100644
index 0000000000..bc4fa08cfc
--- /dev/null
+++ b/keyboards/matrix/noah/eeprom_f4.h
@@ -0,0 +1,130 @@
+/**
+ ******************************************************************************
+ * @file EEPROM/EEPROM_Emulation/inc/eeprom.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the EEPROM
+ * emulation firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright ďż˝ 2017 STMicroelectronics International N.V.
+ * All rights reserved.</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __EEPROM_H
+#define __EEPROM_H
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "hal.h"
+
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* EEPROM emulation firmware error codes */
+#define EE_OK (uint32_t)HAL_OK
+#define EE_ERROR (uint32_t)HAL_ERROR
+#define EE_BUSY (uint32_t)HAL_BUSY
+#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT
+
+/* Define the size of the sectors to be used */
+#define PAGE_SIZE (uint32_t)0x4000 /* Page size = 16KByte */
+
+/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
+ be done by word */
+#define VOLTAGE_RANGE (uint8_t)VOLTAGE_RANGE_3
+
+/* EEPROM start address in Flash */
+#define EEPROM_START_ADDRESS ((uint32_t)0x08008000) /* EEPROM emulation start address:
+ from sector2 : after 16KByte of used
+ Flash memory */
+
+/* Pages 0 and 1 base and end addresses */
+#define PAGE0_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x0000))
+#define PAGE0_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1)))
+#define PAGE0_ID 2//FLASH_SECTOR_2
+
+#define PAGE1_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x4000))
+#define PAGE1_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1)))
+#define PAGE1_ID 3//FLASH_SECTOR_3
+
+/* Used Flash pages for EEPROM emulation */
+#define PAGE0 ((uint16_t)0x0000)
+#define PAGE1 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/
+
+/* No valid page define */
+#define NO_VALID_PAGE ((uint16_t)0x00AB)
+
+/* Page status definitions */
+#define ERASED ((uint16_t)0xFFFF) /* Page is empty */
+#define RECEIVE_DATA ((uint16_t)0xEEEE) /* Page is marked to receive data */
+#define VALID_PAGE ((uint16_t)0x0000) /* Page containing valid data */
+
+/* Valid pages in read and write defines */
+#define READ_FROM_VALID_PAGE ((uint8_t)0x00)
+#define WRITE_IN_VALID_PAGE ((uint8_t)0x01)
+
+/* Page full define */
+#define PAGE_FULL ((uint8_t)0x80)
+
+/* Variables' number */
+#define NB_OF_VAR ((uint8_t)0x16)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+HAL_StatusTypeDef FLASH_UnlockF4(void);
+HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector);
+HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data);
+
+uint16_t EE_Init(void);
+uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data);
+uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data);
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= EEPROM_START_ADDRESS) && ((ADDRESS) < PAGE1_END_ADDRESS))
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) >= PAGE0_ID) && ((SECTOR) <= PAGE1_ID))
+
+#endif /* __EEPROM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/keyboards/matrix/noah/halconf.h b/keyboards/matrix/noah/halconf.h
new file mode 100644
index 0000000000..8c42571983
--- /dev/null
+++ b/keyboards/matrix/noah/halconf.h
@@ -0,0 +1,388 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT TRUE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM TRUE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/matrix/noah/info.json b/keyboards/matrix/noah/info.json
new file mode 100644
index 0000000000..2c40b59809
--- /dev/null
+++ b/keyboards/matrix/noah/info.json
@@ -0,0 +1,721 @@
+{
+ "keyboard_name": "NOAH",
+ "url": "",
+ "maintainer": "astro",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_default": {
+ "key_count": 68,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "|",
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label":"Backspace",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label":"Print Screen",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ { "label": "Page Up",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "Page Down",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "Up",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "End"
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "Alt",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Left",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "Down",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "Right",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ },
+ "LAYOUT_iso": {
+ "key_count": 68,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "Print Screen",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "Enter",
+ "x": 13.75,
+ "y": 1,
+ "w": 1.25,
+ "h": 2
+ },
+ {
+ "label": "Page Up",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "|",
+ "x": 12.75,
+ "y": 2
+ },
+ {
+ "label": "Page Down",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 1.25
+ },
+ {
+ "label":"Win",
+ "x": 1.25,
+ "y": 3
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "Up",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "End",
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "Alt",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Left",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "Down",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "Right",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ }
+ }
+} \ No newline at end of file
diff --git a/keyboards/matrix/noah/keymaps/default/keymap.c b/keyboards/matrix/noah/keymaps/default/keymap.c
new file mode 100644
index 0000000000..44ac206ee4
--- /dev/null
+++ b/keyboards/matrix/noah/keymaps/default/keymap.c
@@ -0,0 +1,20 @@
+/**
+ * keymap.c
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_default(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT),
+ [1] = LAYOUT_default(
+ KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
+ RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______,_______, _______, _______, _______),
+};
diff --git a/keyboards/matrix/noah/keymaps/splitspace/keymap.c b/keyboards/matrix/noah/keymaps/splitspace/keymap.c
new file mode 100644
index 0000000000..e18de67d41
--- /dev/null
+++ b/keyboards/matrix/noah/keymaps/splitspace/keymap.c
@@ -0,0 +1,20 @@
+/**
+ * keymap.c
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_default_splitspace(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT),
+ [1] = LAYOUT_default_splitspace(
+ KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
+ RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
diff --git a/keyboards/matrix/noah/ld/noah_boot.ld b/keyboards/matrix/noah/ld/noah_boot.ld
new file mode 100644
index 0000000000..3abdd1529b
--- /dev/null
+++ b/keyboards/matrix/noah/ld/noah_boot.ld
@@ -0,0 +1,85 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * STM32F411xE memory setup.
+ */
+MEMORY
+{
+ flash0 : org = 0x08020000, len = 512k-128k
+ flash1 : org = 0x00000000, len = 0
+ flash2 : org = 0x00000000, len = 0
+ flash3 : org = 0x00000000, len = 0
+ flash4 : org = 0x00000000, len = 0
+ flash5 : org = 0x00000000, len = 0
+ flash6 : org = 0x00000000, len = 0
+ flash7 : org = 0x00000000, len = 0
+ ram0 : org = 0x20000000, len = 128k
+ ram1 : org = 0x00000000, len = 0
+ ram2 : org = 0x00000000, len = 0
+ ram3 : org = 0x00000000, len = 0
+ ram4 : org = 0x00000000, len = 0
+ ram5 : org = 0x00000000, len = 0
+ ram6 : org = 0x00000000, len = 0
+ ram7 : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/matrix/noah/matrix.c b/keyboards/matrix/noah/matrix.c
new file mode 100644
index 0000000000..02861a8e37
--- /dev/null
+++ b/keyboards/matrix/noah/matrix.c
@@ -0,0 +1,166 @@
+/**
+ * matrix.c
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "quantum.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "matrix.h"
+
+/**
+ *
+ * Row pins are input with internal pull-down.
+ * Column pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_COLS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+void matrix_init(void)
+{
+ //debug_enable = true;
+ palSetLineMode(LINE_COL_1, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_2, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_4, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_5, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_6, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_7, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_8, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_9, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_10, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_11, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_12, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_13, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_14, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetLineMode(LINE_COL_15, PAL_MODE_OUTPUT_PUSHPULL);
+
+ palSetLineMode(LINE_ROW_1, PAL_MODE_INPUT_PULLDOWN);
+ palSetLineMode(LINE_ROW_2, PAL_MODE_INPUT_PULLDOWN);
+ palSetLineMode(LINE_ROW_3, PAL_MODE_INPUT_PULLDOWN);
+ palSetLineMode(LINE_ROW_4, PAL_MODE_INPUT_PULLDOWN);
+ palSetLineMode(LINE_ROW_5, PAL_MODE_INPUT_PULLDOWN);
+
+ palClearLine(LINE_COL_1);
+ palClearLine(LINE_COL_2);
+ palClearLine(LINE_COL_3);
+ palClearLine(LINE_COL_4);
+ palClearLine(LINE_COL_5);
+ palClearLine(LINE_COL_6);
+ palClearLine(LINE_COL_7);
+ palClearLine(LINE_COL_8);
+ palClearLine(LINE_COL_9);
+ palClearLine(LINE_COL_10);
+ palClearLine(LINE_COL_11);
+ palClearLine(LINE_COL_12);
+ palClearLine(LINE_COL_13);
+ palClearLine(LINE_COL_14);
+ palClearLine(LINE_COL_15);
+
+ memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+ memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ matrix_row_t data = 0;
+ switch (col) {
+ case 0: palSetLine(LINE_COL_1); break;
+ case 1: palSetLine(LINE_COL_2); break;
+ case 2: palSetLine(LINE_COL_3); break;
+ case 3: palSetLine(LINE_COL_4); break;
+ case 4: palSetLine(LINE_COL_5); break;
+ case 5: palSetLine(LINE_COL_6); break;
+ case 6: palSetLine(LINE_COL_7); break;
+ case 7: palSetLine(LINE_COL_8); break;
+ case 8: palSetLine(LINE_COL_9); break;
+ case 9: palSetLine(LINE_COL_10); break;
+ case 10: palSetLine(LINE_COL_11); break;
+ case 11: palSetLine(LINE_COL_12); break;
+ case 12: palSetLine(LINE_COL_13); break;
+ case 13: palSetLine(LINE_COL_14); break;
+ case 14: palSetLine(LINE_COL_15); break;
+ }
+
+ // need wait to settle pin state
+ wait_us(20);
+
+ data = (
+ (palReadLine(LINE_ROW_1) << 0 ) |
+ (palReadLine(LINE_ROW_2) << 1 ) |
+ (palReadLine(LINE_ROW_3) << 2 ) |
+ (palReadLine(LINE_ROW_4) << 3 ) |
+ (palReadLine(LINE_ROW_5) << 4 )
+ );
+
+ switch (col) {
+ case 0: palClearLine(LINE_COL_1); break;
+ case 1: palClearLine(LINE_COL_2); break;
+ case 2: palClearLine(LINE_COL_3); break;
+ case 3: palClearLine(LINE_COL_4); break;
+ case 4: palClearLine(LINE_COL_5); break;
+ case 5: palClearLine(LINE_COL_6); break;
+ case 6: palClearLine(LINE_COL_7); break;
+ case 7: palClearLine(LINE_COL_8); break;
+ case 8: palClearLine(LINE_COL_9); break;
+ case 9: palClearLine(LINE_COL_10); break;
+ case 10: palClearLine(LINE_COL_11); break;
+ case 11: palClearLine(LINE_COL_12); break;
+ case 12: palClearLine(LINE_COL_13); break;
+ case 13: palClearLine(LINE_COL_14); break;
+ case 14: palClearLine(LINE_COL_15); break;
+ }
+
+ if (matrix_debouncing[col] != data) {
+ matrix_debouncing[col] = data;
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+ }
+
+ if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) {
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ matrix[row] = 0;
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
+ }
+ }
+ debouncing = false;
+ }
+
+ matrix_scan_quantum();
+
+ return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1<<col)); }
+
+matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
+
+void matrix_print(void)
+{
+ printf("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ printf("%X0: ", row);
+ matrix_row_t data = matrix_get_row(row);
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ if (data & (1<<col))
+ printf("1");
+ else
+ printf("0");
+ }
+ printf("\n");
+ }
+}
diff --git a/keyboards/matrix/noah/mcuconf.h b/keyboards/matrix/noah/mcuconf.h
new file mode 100644
index 0000000000..8405d61e15
--- /dev/null
+++ b/keyboards/matrix/noah/mcuconf.h
@@ -0,0 +1,268 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 8
+#define STM32_PLLN_VALUE 192
+#define STM32_PLLP_VALUE 2
+#define STM32_PLLQ_VALUE 4
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_PLLI2S
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 2
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 TRUE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 TRUE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI4 FALSE
+#define STM32_SPI_USE_SPI5 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI4_DMA_PRIORITY 1
+#define STM32_SPI_SPI5_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_SPI4_IRQ_PRIORITY 10
+#define STM32_SPI_SPI5_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/keyboards/matrix/noah/noah.c b/keyboards/matrix/noah/noah.c
new file mode 100644
index 0000000000..184be43704
--- /dev/null
+++ b/keyboards/matrix/noah/noah.c
@@ -0,0 +1,243 @@
+/**
+ * noah.c
+ */
+
+#include "noah.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include <string.h>
+#include "rgblight.h"
+#include "ws2812_f4.h"
+extern rgblight_config_t rgblight_config;
+
+// led 0 for caps lock, led 1 for scroll lock, led 3 for num lock
+// led 4 for layer 1, led 5 for layer 2, led 6 for layer 3, led 7 for layer 4
+#if RGBLED_NUM < 7
+#error "MUST set the RGBLED_NUM bigger than 7"
+#endif
+LED_TYPE noah_leds[RGBLED_NUM];
+static bool noah_led_mode = false;
+void rgblight_set(void) {
+ memset(&noah_leds[0], 0, sizeof(noah_leds));
+ if (!rgblight_config.enable) {
+ for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+ led[i].r = 0;
+ led[i].g = 0;
+ led[i].b = 0;
+ }
+ }
+ if (noah_led_mode) {
+ uint8_t ind_led = host_keyboard_leds();
+ if (IS_LED_ON(ind_led, USB_LED_CAPS_LOCK)) {
+ noah_leds[0] = led[0];
+ }
+ if (IS_LED_ON(ind_led, USB_LED_SCROLL_LOCK)) {
+ noah_leds[1] = led[1];
+ }
+ if (IS_LED_ON(ind_led, USB_LED_NUM_LOCK)) {
+ noah_leds[2] = led[2];
+ }
+ for (int32_t i = 0; i < 4; i++) {
+ if(layer_state_is(i+1)) {
+ noah_leds[i + 3] = led[i + 3];
+ }
+ }
+ } else {
+ memcpy(&noah_leds[0], &led[0], sizeof(noah_leds));
+ }
+
+ ws2812_setleds(noah_leds, RGBLED_NUM);
+}
+#endif
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+__attribute__((weak))
+void matrix_init_user(void) {
+#ifdef RGBLIGHT_ENABLE
+ ws2812_init();
+ rgblight_enable();
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+ rgb_matrix_disable();
+#endif
+}
+
+__attribute__((weak))
+void matrix_scan_user(void) {
+#ifdef RGBLIGHT_ENABLE
+ rgblight_task();
+#endif
+}
+
+
+#ifdef RGB_MATRIX_ENABLE
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+
+// left CB
+ {0, C1_9, C3_10, C4_10},
+ {0, C1_10, C2_10, C4_11},
+ {0, C1_11, C2_11, C3_11},
+ {0, C1_12, C2_12, C3_12},
+ {0, C1_13, C2_13, C3_13},
+ {0, C1_14, C2_14, C3_14},
+ {0, C1_15, C2_15, C3_15},
+ {0, C1_16, C2_16, C3_16},
+
+ {0, C5_9, C4_9, C6_9},
+ {0, C5_16, C4_16, C6_16},
+
+ {0, C9_9, C8_9, C7_9},
+ {0, C9_10, C8_10, C7_10},
+ {0, C9_11, C8_11, C7_11},
+ {0, C9_12, C8_12, C7_12},
+ {0, C9_13, C8_13, C7_13},
+ {0, C9_14, C8_14, C7_14},
+ {0, C9_15, C8_15, C6_14},
+ {0, C9_16, C7_15, C6_15},
+
+// left CA
+ {0, C1_1, C3_2, C4_2},
+ {0, C1_2, C2_2, C4_3},
+ {0, C1_3, C2_3, C3_3},
+ {0, C1_4, C2_4, C3_4},
+ {0, C1_5, C2_5, C3_5},
+ {0, C1_6, C2_6, C3_6},
+ {0, C1_7, C2_7, C3_7},
+ {0, C1_8, C2_8, C3_8},
+
+ {0, C5_1, C4_1, C6_1},
+ {0, C5_8, C4_8, C6_8},
+
+ {0, C9_1, C8_1, C7_1},
+ {0, C9_2, C8_2, C7_2},
+ {0, C9_3, C8_3, C7_3},
+ {0, C9_4, C8_4, C7_4},
+ {0, C9_5, C8_5, C7_5},
+ {0, C9_6, C8_6, C7_6},
+ {0, C9_7, C8_7, C6_6},
+ {0, C9_8, C7_7, C6_7},
+
+// right CA
+ {1, C1_1, C3_2, C4_2},
+ {1, C1_2, C2_2, C4_3},
+ {1, C1_3, C2_3, C3_3},
+ {1, C1_4, C2_4, C3_4},
+ {1, C1_5, C2_5, C3_5},
+ {1, C1_6, C2_6, C3_6},
+ {1, C1_7, C2_7, C3_7},
+ {1, C1_8, C2_8, C3_8},
+
+ {1, C5_1, C4_1, C6_1},
+ {1, C5_8, C4_8, C6_8},
+
+ {1, C9_1, C8_1, C7_1},
+ {1, C9_2, C8_2, C7_2},
+ {1, C9_3, C8_3, C7_3},
+ {1, C9_4, C8_4, C7_4},
+ {1, C9_5, C8_5, C7_5},
+ {1, C9_6, C8_6, C7_6},
+ {1, C9_7, C8_7, C6_6},
+ {1, C9_8, C7_7, C6_7},
+// right CB
+ {1, C1_9, C3_10, C4_10},
+ {1, C1_10, C2_10, C4_11},
+ {1, C1_11, C2_11, C3_11},
+ {1, C1_12, C2_12, C3_12},
+ {1, C1_13, C2_13, C3_13},
+ {1, C1_14, C2_14, C3_14},
+ {1, C1_15, C2_15, C3_15},
+ {1, C1_16, C2_16, C3_16},
+
+ {1, C5_9, C4_9, C6_9},
+ {1, C5_16, C4_16, C6_16},
+
+ {1, C9_9, C8_9, C7_9},
+ {1, C9_10, C8_10, C7_10},
+ {1, C9_11, C8_11, C7_11},
+ {1, C9_12, C8_12, C7_12},
+ {1, C9_13, C8_13, C7_13},
+ {1, C9_14, C8_14, C7_14},
+ {1, C9_15, C8_15, C6_14},
+ {1, C9_16, C7_15, C6_15},
+};
+
+led_config_t g_led_config = {
+ {
+ { 1, 2, 3, 4, 5, 6, 7, 36, 37, 38, 39, 40, NO_LED, 41},
+ { 0, 8, 10, 11, 12, 13, 14, 44, 46, 47, 48, 49, 50, 51},
+ { 30, 18, 26, 9, 19, 15, 16, 17, 55, 56, 57, 58, 59, 60},
+ { 29, 31, 32, 33, 20, 21, 23, 22, 54, 62, 64, 65, 66, 63},
+ { 34, 35, 27, 25, 67, 68, 69, 70, 71, 61, 53, 45, 42, 43},
+ },
+ {
+ { 0, 16},{ 0, 0},{ 15, 0},{ 30, 0},{ 45, 0},{ 60, 0},{ 75, 0},{ 90, 0},
+ { 20, 16},{ 42, 32},
+ { 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32},
+
+ { 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64},
+ { 42, 32},{ 38, 64},
+ { 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{ 0, 64},{ 19, 64},
+
+ {105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0},
+ {110, 16},{224, 16},
+ {125, 16},{140, 16},{155, 16},{172, 16},{187, 16},{202, 16},{210, 32},{224, 32},
+
+ {125, 48},{112, 32},{126, 32},{140, 32},{154, 32},{168, 32},{182, 32},{224, 48},
+ {140, 48},{200, 48},
+ {155, 48},{170, 48},{185, 48},{150, 64},{173, 64},{195, 64},{210, 64},{224, 64}
+ },
+ {
+ 1, 1, 4, 4, 4, 4, 4, 4,
+ 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4,
+
+ 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4,
+ 1, 1, 1, 4, 4, 4, 1, 1,
+
+ 4, 4, 4, 4, 4, 4, 1, 1,
+ 4, 1,
+ 4, 4, 4, 4, 4, 4, 4, 1,
+
+ 4, 4, 4, 4, 4, 4, 4, 1,
+ 4, 4,
+ 4, 4, 4, 1, 1, 1, 1, 1,
+ }
+};
+
+#endif
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+ switch(keycode) {
+ #ifdef RGBLIGHT_ENABLE
+ case KC_F24: // switch the led mode on or off
+ noah_led_mode = !noah_led_mode;
+ return false;
+
+ #ifdef RGB_MATRIX_ENABLE
+ case KC_F13: // toggle rgb matrix
+ rgb_matrix_toggle();
+ return false;
+ case KC_F14:
+ rgb_matrix_step();
+ return false;
+ #endif
+ #endif
+ default:
+ break;
+ }
+ }
+ return true;
+}
diff --git a/keyboards/matrix/noah/noah.h b/keyboards/matrix/noah/noah.h
new file mode 100644
index 0000000000..1efb991d96
--- /dev/null
+++ b/keyboards/matrix/noah/noah.h
@@ -0,0 +1,91 @@
+/**
+ * noah.h
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
+ {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
+}
+
+#define LAYOUT_wkl( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k45, k46, k47, k48 \
+) { \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
+ {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
+}
+
+#define LAYOUT_iso( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k45, k46, k47, k48 \
+) { \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
+}
+
+#define LAYOUT_default_splitspace( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a \
+) { \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
+ {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \
+}
+
+#define LAYOUT_wkl_splitspace( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \
+) { \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
+ {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \
+}
+
+#define LAYOUT_iso_splitspace( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \
+) { \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
+ {k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \
+}
diff --git a/keyboards/matrix/noah/readme.md b/keyboards/matrix/noah/readme.md
new file mode 100644
index 0000000000..788fc18727
--- /dev/null
+++ b/keyboards/matrix/noah/readme.md
@@ -0,0 +1,19 @@
+# NOAH 65 keyboard
+
+![NOAH](https://raw.githubusercontent.com/yulei/qmk_webusb_tool/master/public/noah.jpg)
+This was the first 65% keyboard made by the Matrix team, it had the following features:
+
+- per key rgb led
+- 7 RGB led for caps, scroll , num lock and layer state indicator, or just play light animation effects
+- ansi and iso layouts, and split spacebar supported
+- pre-programmed bootloader which emulated usb stick to ease firmware updating
+
+Keyboard Maintainer: [astro](https://github.com/yulei)
+Hardware Supported: Matrix NOAH keyboard
+Hardware Availability: [NOAH Keybaord](https://geekhack.org/index.php?topic=102300.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make matrix/noah:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file
diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk
new file mode 100644
index 0000000000..217e780d87
--- /dev/null
+++ b/keyboards/matrix/noah/rules.mk
@@ -0,0 +1,57 @@
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F4xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+MCU_LDSCRIPT = noah_boot
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f4xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+BOARD = noah_bd
+
+# Cortex version
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+#DFU_SUFFIX_ARGS = -p DF11 -v 0483
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # USB Nkey Rollover
+NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
+
+CUSTOM_MATRIX = yes
+RGB_MATRIX_ENABLE = yes
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+# project specific files
+SRC += \
+ matrix.c \
+ ws2812_f4.c \
+ eeprom_f4.c
diff --git a/keyboards/matrix/noah/ws2812_f4.c b/keyboards/matrix/noah/ws2812_f4.c
new file mode 100644
index 0000000000..7536d6d8c2
--- /dev/null
+++ b/keyboards/matrix/noah/ws2812_f4.c
@@ -0,0 +1,272 @@
+/**
+ * @file ws2812.c
+ * @author Austin Glaser <austin.glaser@gmail.com>, Joerg Wangemann <joerg.wangemann@gmail.com>
+ * @brief WS2812 LED driver
+ *
+ * Copyright (C) 2016 Austin Glaser, 2017 Joerg Wangemann
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license. See the LICENSE file for details.
+ *
+ * @todo Put in names and descriptions of variables which need to be defined to use this file
+ *
+ * @addtogroup WS2812
+ * @{
+ */
+
+/* --- PRIVATE DEPENDENCIES ------------------------------------------------- */
+
+// This Driver
+#include "ws2812_f4.h"
+
+// Standard
+#include <stdint.h>
+
+// ChibiOS
+#include "ch.h"
+#include "hal.h"
+
+#include "wait.h"
+// Application
+//#include "board.h"
+
+// TODO: Add these #define's to the headers of your project.
+// Pin, timer and dma are all connected, check them all if you change one.
+// Tested with STM32F4, working at 144 or 168 MHz.
+//#define WS2812_LED_N 2 // Number of LEDs
+//#define PORT_WS2812 GPIOB
+//#define PIN_WS2812 9
+//#define WS2812_TIM_N 4 // timer, 1-11
+//#define WS2812_TIM_CH 3 // timer channel, 0-3
+//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 6 // DMA channel for TIMx_UP
+// The WS2812 expects 5V signal level (or at least 0.7 * VDD). Sometimes it works
+// with a 3V signal level, otherwise the easiest way to get the signal level to 5V
+// is to add an external pullup resistor from the DI pin to 5V (10k will do) and
+// configure the pin as open drain.
+// (An SMD resistor is easily solders on the connections of a light strip)
+// Uncomment the next line if an external pullup resistor is used.
+//#define WS2812_EXTERNAL_PULLUP
+
+/* --- CONFIGURATION CHECK -------------------------------------------------- */
+
+#if !defined(WS2812_LED_N)
+ #error WS2812 LED chain length not specified
+#elif WS2812_LED_N <= 0
+ #error WS2812 LED chain length set to invalid value
+#endif
+
+#if !defined(WS2812_TIM_N)
+ #error WS2812 timer not specified
+#endif
+#if defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32F7XX)
+ #if WS2812_TIM_N <= 2
+ #define WS2812_AF 1
+ #elif WS2812_TIM_N <= 5
+ #define WS2812_AF 2
+ #elif WS2812_TIM_N <= 11
+ #define WS2812_AF 3
+ #endif
+#elif !defined(WS2812_AF)
+ #error WS2812_AF timer alternate function not specified
+#endif
+
+#if !defined(WS2812_TIM_CH)
+ #error WS2812 timer channel not specified
+#elif WS2812_TIM_CH >= 4
+ #error WS2812 timer channel set to invalid value
+#endif
+
+/* --- PRIVATE CONSTANTS ---------------------------------------------------- */
+
+#define WS2812_PWM_FREQUENCY (STM32_SYSCLK/2) /**< Clock frequency of PWM, must be valid with respect to system clock! */
+#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY/800000) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */
+
+/**
+ * @brief Number of bit-periods to hold the data line low at the end of a frame
+ *
+ * The reset period for each frame must be at least 50 uS; so we add in 50 bit-times
+ * of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some
+ * slack in the timing requirements
+ */
+#define WS2812_RESET_BIT_N (50)
+#define WS2812_COLOR_BIT_N (WS2812_LED_N*24) /**< Number of data bits */
+#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */
+
+/**
+ * @brief High period for a zero, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 650 nS to 950 nS, inclusive
+ * WS2812B:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 750 nS to 1050 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 350 nS.
+ */
+#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY/(1000000000/450))
+
+/**
+ * @brief High period for a one, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T1H: 550 nS to 850 nS, inclusive
+ * - T1L: 450 nS to 750 nS, inclusive
+ * WS2812B:
+ * - T1H: 750 nS to 1050 nS, inclusive
+ * - T1L: 200 nS to 500 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 800 nS.
+ * This is in the middle of the specifications of the WS2812 and WS2812B.
+ */
+#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY/(1000000000/900))
+
+/* --- PRIVATE MACROS ------------------------------------------------------- */
+
+/**
+ * @brief Generates a reference to a numbered PWM driver
+ *
+ * @param[in] n: The driver (timer) number
+ *
+ * @return A reference to the driver
+ */
+#define PWMD(n) CONCAT_EXPANDED_SYMBOLS(PWMD, n)
+
+#define WS2812_PWMD PWMD(WS2812_TIM_N) /**< The PWM driver to use for the LED chain */
+
+/**
+ * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit
+ *
+ * @param[in] led: The led index [0, @ref WS2812_LED_N)
+ * @param[in] byte: The byte number [0, 2]
+ * @param[in] bit: The bit number [0, 7]
+ *
+ * @return The bit index
+ */
+#define WS2812_BIT(led, byte, bit) (24*(led) + 8*(byte) + (7 - (bit)))
+
+/**
+ * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
+ *
+ * @note The red byte is the middle byte in the color packet
+ *
+ * @param[in] led: The led index [0, @ref WS2812_LED_N)
+ * @param[in] bit: The bit number [0, 7]
+ *
+ * @return The bit index
+ */
+#define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit))
+
+/**
+ * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
+ *
+ * @note The green byte is the first byte in the color packet
+ *
+ * @param[in] led: The led index [0, @ref WS2812_LED_N)
+ * @param[in] bit: The bit number [0, 7]
+ *
+ * @return The bit index
+ */
+#define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit))
+
+/**
+ * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
+ *
+ * @note The blue byte is the last byte in the color packet
+ *
+ * @param[in] led: The led index [0, @ref WS2812_LED_N)
+ * @param[in] bit: The bit index [0, 7]
+ *
+ * @return The bit index
+ */
+#define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
+
+/* --- PRIVATE VARIABLES ---------------------------------------------------- */
+
+static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */
+
+/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
+/*
+ * Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for
+the memory (while the DMA is reading/writing from/to a buffer, the application can
+write/read to/from the other buffer).
+ */
+
+void ws2812_init(void)
+{
+ // Initialize led frame buffer
+ uint32_t i;
+ for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle
+ for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero
+ // Configure pin as AF output. If there's an external pull up resistor the signal level is brought to 5V using open drain mode.
+#ifdef WS2812_EXTERNAL_PULLUP
+ palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_OPENDRAIN);
+#else
+ palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_PUSHPULL); //PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+#endif
+ //palClearPad(PORT_WS2812, PIN_WS2812);
+ //wait_ms(1);
+ // PWM Configuration
+ #pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
+ static const PWMConfig ws2812_pwm_config = {
+ .frequency = WS2812_PWM_FREQUENCY,
+ .period = WS2812_PWM_PERIOD, //Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben
+ .callback = NULL,
+ .channels = {
+ [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled
+ [WS2812_TIM_CH] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about
+ },
+ .cr2 = 0,
+ .dier = TIM_DIER_UDE, // DMA on update event for next period
+ };
+ #pragma GCC diagnostic pop // Restore command-line warning options
+
+ // Configure DMA
+ //dmaInit(); // Joe added this
+ dmaStreamAllocate(WS2812_DMA_STREAM, 10, NULL, NULL);
+ dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWMD.tim->CCR[WS2812_TIM_CH])); // Ziel ist der An-Zeit im Cap-Comp-Register
+ dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer);
+ dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N);
+ dmaStreamSetMode(WS2812_DMA_STREAM,
+ STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
+ // M2P: Memory 2 Periph; PL: Priority Level
+
+ // Start DMA
+ dmaStreamEnable(WS2812_DMA_STREAM);
+
+ // Configure PWM
+ // NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the
+ // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer,
+ // disable counting, enable the channel, and then make whatever configuration changes we need.
+ pwmStart(&WS2812_PWMD, &ws2812_pwm_config);
+ pwmEnableChannel(&WS2812_PWMD, WS2812_TIM_CH, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in
+}
+
+ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b)
+{
+ // Check for valid LED
+ if (led_number > WS2812_LED_N) return WS2812_LED_INVALID;
+
+ // Write color to frame buffer
+ for (uint32_t bit = 0; bit < 8; bit++) {
+ ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+ ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+ ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+ }
+
+ // Success
+ return WS2812_SUCCESS;
+}
+
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds)
+{
+ for(int i = 0; i < number_of_leds; i++) {
+ ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b);
+ }
+}
+
+/** @} addtogroup WS2812 */
diff --git a/keyboards/matrix/noah/ws2812_f4.h b/keyboards/matrix/noah/ws2812_f4.h
new file mode 100644
index 0000000000..245bd15fef
--- /dev/null
+++ b/keyboards/matrix/noah/ws2812_f4.h
@@ -0,0 +1,102 @@
+/**
+ * @file ws2812.h
+ * @author Austin Glaser <austin.glaser@gmail.com>
+ * @brief Interface to WS2812 LED driver
+ *
+ * Copyright (C) 2016 Austin Glaser
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license. See the LICENSE file for details.
+ *
+ * @todo Put in names and descriptions of variables which need to be defined to use this file
+ */
+
+#ifndef WS2812_H_
+#define WS2812_H_
+
+/**
+ * @defgroup WS2812 WS2812 Driver
+ * @{
+ *
+ * @brief DMA-based WS2812 LED driver
+ *
+ * A driver for WS2812 LEDs
+ */
+
+/* --- PUBLIC DEPENDENCIES -------------------------------------------------- */
+
+// Standard
+#include <stdint.h>
+#include "color.h"
+
+/* --- PUBLIC MACROS -------------------------------------------------------- */
+
+/**
+ * @brief Concatenates two symbols s1 and s2 exactly, without expanding either
+ *
+ * @param[in] s1: The first symbol to concatenate
+ * @param[in] s2: The second symbol to concatenate
+ *
+ * @return A single symbol containing s1 and s2 concatenated without expansion
+ */
+#define CONCAT_SYMBOLS(s1, s2) s1##s2
+
+/**
+ * @brief Concatenate the symbols s1 and s2, expanding both of them
+ *
+ * This is important because simply applying s1##s2 doesn't expand them if they're
+ * preprocessor tokens themselves
+ *
+ * @param[in] s1: The first symbol to concatenate
+ * @param[in] s2: The second symbol to concatenate
+ *
+ * @return A single symbol containing s1 expanded followed by s2 expanded
+ */
+#define CONCAT_EXPANDED_SYMBOLS(s1, s2) CONCAT_SYMBOLS(s1, s2)
+
+/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
+
+/**
+ * @brief Return codes from ws2812 interface functions
+ */
+typedef enum {
+ WS2812_SUCCESS = 0x00, /**< Operation completeed successfully */
+ WS2812_LED_INVALID, /**< Attempted to index an invalid LED (@ref WS2812_N_LEDS) */
+ MAX_WS2812_ERR, /**< Total number of possible error codes */
+ WS2812_ERR_INVALID /**< Invalid error value */
+} ws2812_err_t;
+
+/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
+
+/**
+ * @brief Initialize the driver
+ *
+ * After this function is called, all necessary background tasks will be started.
+ * The frame is initially dark.
+ */
+void ws2812_init(void);
+
+/**
+ * @brief Write the value of a single LED in the chain
+ *
+ * The color value is written to a frame buffer, and will not
+ * be updated until the next frame is written. Frames are written
+ * at the maximum possible speed -- the longest latency between a
+ * call to this function and the value being displayed is
+ * 1.25uS*(24*@ref WS2812_LED_N + 50)
+ *
+ * @param[in] led_number: The index of the LED to be written. Must be strictly less than
+ * @ref WS2812_N_LEDS
+ * @param[in] r: The red level of the LED
+ * @param[in] g: The green level of the LED
+ * @param[in] b: The blue level of the LED
+ *
+ * @retval WS2812_SUCCESS: The write was successful
+ * @retval WS2812_LED_INVALID: The write was to an invalid LED index
+ */
+ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b);
+
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+/** @} defgroup WS2812 */
+
+#endif // ifndef WS2812_H_