Merge remote-tracking branch 'qmk/master'

9 files changed, 218 insertions, 0 deletions

diff --git a/keyboards/kinesis/stapelberg/Makefile b/keyboards/kinesis/stapelberg/Makefile
new file mode 100644
index 0000000000..bd09e5885d
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
diff --git a/keyboards/kinesis/stapelberg/config.h b/keyboards/kinesis/stapelberg/config.h
new file mode 100644
index 0000000000..0677e0adeb
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/config.h
@@ -0,0 +1,50 @@
+#ifndef STAPELBERG_CONFIG_H
+#define STAPELBERG_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0002
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS  7 
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* don't know if this should be defined at the board or top level. Assuming board 
+#define MOUSEKEY_DELAY          100
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_MAX_SPEED      3
+#define MOUSEKEY_TIME_TO_MAX    10
+*/
+
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+#endif
diff --git a/keyboards/kinesis/stapelberg/images/controller_board.jpg b/keyboards/kinesis/stapelberg/images/controller_board.jpg
new file mode 100644
index 0000000000..b18f76f7ef
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/images/controller_board.jpg
diff --git a/keyboards/kinesis/stapelberg/images/exterior_reset.jpg b/keyboards/kinesis/stapelberg/images/exterior_reset.jpg
new file mode 100644
index 0000000000..6edda81306
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/images/exterior_reset.jpg
diff --git a/keyboards/kinesis/stapelberg/images/teensy_detail.jpg b/keyboards/kinesis/stapelberg/images/teensy_detail.jpg
new file mode 100644
index 0000000000..12e6c1c8ae
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/images/teensy_detail.jpg
diff --git a/keyboards/kinesis/stapelberg/readme.md b/keyboards/kinesis/stapelberg/readme.md
new file mode 100644
index 0000000000..b04a0bd49c
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/readme.md
@@ -0,0 +1,55 @@
+# kinesis_stapelberg keyboard firmware
+
+This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
+It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
+
+The controller board hardware is described
+[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
+
+Mapping the pin assignments was done using the corresponding matrix description provided at this
+[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
+
+This code makes no attempt to drive the four LEDs provided on the controller board.
+
+
+## Building the Hardware
+
+If you want to perform this customization, these parts may be helpful.
+
+| Function                                               | Quantity | Vendor   | Part Number  |
+| ------------------------------------------------------ | -------- | -------  | ------------ |
+| 13 pin connector for function keys and finger keywells | 4        | Digi-Key | WM14526-ND   |
+| 10 pin headers for thumb clusters                      | 4        | Digi-Key | 609-3250-ND  |
+| 8 pin cable for thumb clusters                         | 2        | Digi-Key | SAM8928-ND   |
+| Teensy++ 2.0                                           | 1        | Digi-Key | 1528-1056-ND |
+| 2 pin right angle header for reset                     | 1        | Digi-Key | 3M9467-ND    |
+| Reset cables                                           | 2        | Sparkfun | PRT-09140    |
+
+The board and connections are shown here
+![](images/controller_board.jpg)
+
+The Teensy mounting detail can be seen here.
+I used a socket for prototyping.
+![](images/teensy_detail.jpg)
+
+
+Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
+Shorting these two pins together will reset the board.
+I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
+The exterior cables can be seen here.
+![](images/exterior_reset.jpg)
+
+
+## Keymaps
+
+### Default
+
+To build with the default keymap, run `make default` while in the
+`kinesis_stapelberg` working directory.
+
+### Dvorak
+
+This keymap contains a dvorak implementation as well as media and symbol layers.
+
+Run `make dvorak` while in the `kinesis_stapelberg` working directory.
+
diff --git a/keyboards/kinesis/stapelberg/rules.mk b/keyboards/kinesis/stapelberg/rules.mk
new file mode 100644
index 0000000000..fb421a34fc
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/rules.mk
@@ -0,0 +1,10 @@
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+# just silently stop, since we need to upload with teensy uploader
+upload: build
+
+
+
+
diff --git a/keyboards/kinesis/stapelberg/stapelberg.c b/keyboards/kinesis/stapelberg/stapelberg.c
new file mode 100644
index 0000000000..111db81feb
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/stapelberg.c
@@ -0,0 +1,28 @@
+#include "stapelberg.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/kinesis/stapelberg/stapelberg.h b/keyboards/kinesis/stapelberg/stapelberg.h
new file mode 100644
index 0000000000..c90fc3d52d
--- /dev/null
+++ b/keyboards/kinesis/stapelberg/stapelberg.h
@@ -0,0 +1,72 @@
+#ifndef KINESIS_STAPELBERG_H
+#define KINESIS_STAPELBERG_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments as on the physical keyboard
+// The second converts the arguments into the 2-D scanned array
+
+#define KEYMAP(                           \
+    kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2,  \
+    k00,k10,k20,k30,k40,k50,              \
+    k01,k11,k21,k31,k41,k51,              \
+    k02,k12,k22,k32,k42,k52,              \
+    k03,k13,k23,k33,k43,k53,              \
+        k14,k24,k34,k54,                  \
+                        k56,k55,          \
+                            k35,          \
+                    k36,k46,k25,          \
+    kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5,  \
+        k60,k70,k80,k90,kA0,kB0,          \
+        k61,k71,k81,k91,kA1,kB1,          \
+        k62,k72,k82,k92,kA2,kB2,          \
+        k63,k73,k83,k93,kA3,kB3,          \
+            k64,k84,k94,kA4,              \
+    k96,k85,                              \
+    k86,                                  \
+    k66,k75,k65                           \
+) {                                       \
+        { k00,    k01,    k02,    k03,    KC_NO,  KC_NO,  KC_NO }, \
+        { k10,    k11,    k12,    k13,    k14,    KC_NO,  KC_NO }, \
+        { k20,    k21,    k22,    k23,    k24,    k25,    KC_NO }, \
+        { k30,    k31,    k32,    k33,    k34,    k35,    k36   }, \
+        { k40,    k41,    k42,    k43,    KC_NO,  KC_NO,  k46   }, \
+        { k50,    k51,    k52,    k53,    k54,    k55,    k56   }, \
+        { k60,    k61,    k62,    k63,    k64,    k65,    k66   }, \
+        { k70,    k71,    k72,    k73,    KC_NO,  k75,    KC_NO }, \
+        { k80,    k81,    k82,    k83,    k84,    k85,    k86   }, \
+        { k90,    k91,    k92,    k93,    k94,    KC_NO,  k96   }, \
+        { kA0,    kA1,    kA2,    kA3,    kA4,    KC_NO,  KC_NO }, \
+        { kB0,    kB1,    kB2,    kB3,    KC_NO,  KC_NO,  KC_NO }, \
+        { kC0,    kC1,    kC2,    kC3,    kC4,    kC5,    KC_NO }, \
+        { kD0,    kD1,    kD2,    kD3,    kD4,    kD5,    KC_NO }, \
+        { kE0,    kE1,    kE2,    kE3,    kE4,    kE5,    KC_NO } \
+}
+
+/*
+This is the Stapelberg matrix as published at
+https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
+Along with the pins for each row and column
+             PB0 PB1 PB2 PB3 PB4 PB5 PB6
+             kx0 kx1 kx2 kx3 kx4 kx5 kx6
+PD0 k0x Row: EQL TAB CAP LSH X2  --  --
+PD1 k1x Row: 1   Q   A   Z   BQ  --  --
+PD2 k2x Row: 2   W   S   X   INS END --
+PD3 k3x Row: 3   E   D   C   LFT HOM BAK
+PD4 k4x Row: 4   R   F   V   --  --  DEL
+PD5 k5x Row: 5   T   G   B   RT  LAL LCT
+PD6 k6x Row: 6   Y   H   N   UP  SPC PGD
+PD7 k7x Row: 7   U   J   M   --  RET --
+PB0 k8x Row: 8   I   K   COM DWN RCT PGU
+PB1 k9x Row: 9   O   L   PER LBR --  RAL
+PB2 kAx Row: 0   P   SEM SLA RBR --  --
+PB3 kBx Row: MIN BSL APO RSH X1  --  --
+PB4 kCx Row: ESC F3  F6  F9  F12 PAU --
+PB5 kDx Row: F1  F4  F7  F10 PRT PRG --
+PB6 kEx Row: F2  F5  F8  F11 SLK KEY --
+*/
+
+
+
+#endif