remove all keyboards but ergodox and planck

13 files changed, 0 insertions, 1357 deletions

diff --git a/keyboards/k_type/bootloader_defs.h b/keyboards/k_type/bootloader_defs.h
deleted file mode 100644
index c67153be60..0000000000
--- a/keyboards/k_type/bootloader_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER
diff --git a/keyboards/k_type/chconf.h b/keyboards/k_type/chconf.h
deleted file mode 100644
index d9114ec858..0000000000
--- a/keyboards/k_type/chconf.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 100000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 20
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/k_type/config.h b/keyboards/k_type/config.h
deleted file mode 100644
index a841a57107..0000000000
--- a/keyboards/k_type/config.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x1c11
-#define PRODUCT_ID      0xb04d
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER Input Club
-#define PRODUCT K-Type/QMK
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 10
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/k_type/halconf.h b/keyboards/k_type/halconf.h
deleted file mode 100644
index b87b0635c4..0000000000
--- a/keyboards/k_type/halconf.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 TRUE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/keyboards/k_type/info.json b/keyboards/k_type/info.json
deleted file mode 100644
index 9d3e10568b..0000000000
--- a/keyboards/k_type/info.json
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "K-Type",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 18.25,
-  "height": 6.5,
-  "layouts": {
-      "KEYMAP": {
-          "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
-      }
-  }
-}
diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c
deleted file mode 100644
index 0cffbedfd6..0000000000
--- a/keyboards/k_type/k_type.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "k_type.h"
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-void matrix_init_kb(void) {
-  matrix_init_user();
-};
-
-void matrix_scan_kb(void) {
-  matrix_scan_user();
-};
diff --git a/keyboards/k_type/k_type.h b/keyboards/k_type/k_type.h
deleted file mode 100644
index b0c1f2d652..0000000000
--- a/keyboards/k_type/k_type.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
-Copyright 2017 Input Club
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef K_TYPE_H
-#define K_TYPE_H
-
-#include "quantum.h"
-
-#define KEYMAP( \
-    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, K16, \
-    K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, \
-    K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K50, \
-    K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, K61, K62, K63, \
-    K64, K65, K66, K67, K68, K69, K70, K71, K72, K73, K74, K75, K76, \
-    K77, K78, K79, K80, K81, K82, K83, K84, K85, K86, K87 \
-) { \
-    {   K01,   K11,   K21,   K30,   K39,   K48,   K58,   K65, KC_NO,   K83, }, \
-    {   K02,   K12,   K22, KC_NO,   K40,   K49,   K59,   K66,   K75,   K84, }, \
-    {   K03,   K13,   K23,   K31,   K41,   K50,   K60,   K67, KC_NO,   K85, }, \
-    {   K04,   K14,   K24,   K32,   K42,   K51,   K61,   K68,   K76,   K86, }, \
-    {   K05,   K15,   K25,   K33,   K43,   K52,   K62,   K69,   K77,   K87, }, \
-    {   K06,   K16,   K26,   K34,   K44,   K53, KC_NO,   K70,   K78, KC_NO, }, \
-    {   K07,   K17,   K27,   K35,   K45,   K54,   K63,   K71,   K79, KC_NO, }, \
-    {   K08,   K18,   K28,   K36,   K46,   K55, KC_NO,   K72,   K80, KC_NO, }, \
-    {   K09,   K19,   K29,   K37,   K47,   K56,   K64,   K73,   K81, KC_NO, }, \
-    {   K10,   K20, KC_NO,   K38, KC_NO,   K57, KC_NO,   K74,   K82, KC_NO, }, \
-}
-
-#endif
diff --git a/keyboards/k_type/keymaps/belak/keymap.c b/keyboards/k_type/keymaps/belak/keymap.c
deleted file mode 100644
index ed9392a2a5..0000000000
--- a/keyboards/k_type/keymaps/belak/keymap.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include "k_type.h"
-
-#define _QW 0
-#define _L1 1
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_QW] = KEYMAP(
-      KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS, \
-      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN, \
-      MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP, \
-      KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,                    KC_RALT, KC_RGUI, MO(_L1), KC_RCTL,                            KC_LEFT, KC_DOWN, KC_RGHT),
-    [_L1] = KEYMAP(
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_VOLU, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSTP, KC_MPRV, KC_VOLD, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            KC_PGUP, \
-      _______, _______, _______,          _______,                   _______, _______, _______, _______,                            KC_HOME, KC_PGDN, KC_END),
-};
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-
-};
diff --git a/keyboards/k_type/keymaps/default/keymap.c b/keyboards/k_type/keymaps/default/keymap.c
deleted file mode 100644
index 331d331552..0000000000
--- a/keyboards/k_type/keymaps/default/keymap.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP(
-      KC_ESC,  KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS, \
-      KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN, \
-      KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-      KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP, \
-      KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,                KC_RALT, KC_RGUI, KC_MENU, KC_RCTL,                            KC_LEFT, KC_DOWN, KC_RGHT),
-};
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-
-};
diff --git a/keyboards/k_type/matrix.c b/keyboards/k_type/matrix.c
deleted file mode 100644
index d919bb8809..0000000000
--- a/keyboards/k_type/matrix.c
+++ /dev/null
@@ -1,138 +0,0 @@
-//#include <stdint.h>
-//#include <stdbool.h>
-#include <string.h>
-#include "hal.h"
-#include "timer.h"
-#include "wait.h"
-#include "print.h"
-#include "matrix.h"
-#include "debug.h"
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-void matrix_init(void)
-{
-    debug_matrix = true;
-
-    /* Column(sense) */
-    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 1,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 2,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 3,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 4,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 5,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 6,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 7,  PAL_MODE_INPUT_PULLDOWN);
-
-    /* Row(strobe) */
-    palSetPadMode(GPIOB, 2,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 3,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 18,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 19,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 0,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 8,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOC, 9,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOD, 0,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOD, 1,   PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOD, 4,   PAL_MODE_OUTPUT_PUSHPULL);
-
-    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
-    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
-
-    matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void)
-{
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        matrix_row_t data = 0;
-        // strobe row
-        switch (row) {
-            case 0: palSetPad(GPIOB, 2);    break;
-            case 1: palSetPad(GPIOB, 3);    break;
-            case 2: palSetPad(GPIOB, 18);   break;
-            case 3: palSetPad(GPIOB, 19);   break;
-            case 4: palSetPad(GPIOC, 0);    break;
-            case 5: palSetPad(GPIOC, 8);    break;
-            case 6: palSetPad(GPIOC, 9);    break;
-            case 7: palSetPad(GPIOD, 0);    break;
-            case 8: palSetPad(GPIOD, 1);    break;
-            case 9: palSetPad(GPIOD, 4);    break;
-        }
-
-        // need wait to settle pin state
-        // if you wait too short, or have a too high update rate
-        // the keyboard might freeze, or there might not be enough
-        // processing power to update the LCD screen properly.
-        // 20us, or two ticks at 100000Hz seems to be OK
-        wait_us(20);
-
-        // read col data: { PTD5, PTD6, PTD7, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7 }
-        data = ((palReadPort(GPIOC) & 0xFEUL) << 2) |
-               ((palReadPort(GPIOD) & 0xE0UL) >> 5);
-
-        // un-strobe row
-        switch (row) {
-            case 0: palClearPad(GPIOB, 2);  break;
-            case 1: palClearPad(GPIOB, 3);  break;
-            case 2: palClearPad(GPIOB, 18); break;
-            case 3: palClearPad(GPIOB, 19); break;
-            case 4: palClearPad(GPIOC, 0);  break;
-            case 5: palClearPad(GPIOC, 8);  break;
-            case 6: palClearPad(GPIOC, 9);  break;
-            case 7: palClearPad(GPIOD, 0);  break;
-            case 8: palClearPad(GPIOD, 1);  break;
-            case 9: palClearPad(GPIOD, 4);  break;
-        }
-
-        if (matrix_debouncing[row] != data) {
-            matrix_debouncing[row] = data;
-            debouncing = true;
-            debouncing_time = timer_read();
-        }
-    }
-
-    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            matrix[row] = matrix_debouncing[row];
-        }
-        debouncing = false;
-    }
-
-    matrix_scan_quantum();
-    return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1 << col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    xprintf("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        xprintf("%02X: ", row);
-        matrix_row_t data = matrix_get_row(row);
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            if (data & (1<<col))
-                xprintf("1");
-            else
-                xprintf("0");
-        }
-        xprintf("\n");
-    }
-
-    wait_ms(50);
-}
diff --git a/keyboards/k_type/mcuconf.h b/keyboards/k_type/mcuconf.h
deleted file mode 100644
index 28f3c6cdae..0000000000
--- a/keyboards/k_type/mcuconf.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define K20x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-
-/* Select the MCU clocking mode below by enabling the appropriate block. */
-
-#define KINETIS_NO_INIT             FALSE
-
-/* PEE mode - 48MHz system clock driven by external crystal. */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
-#define KINETIS_PLLCLK_FREQUENCY    72000000UL
-#define KINETIS_SYSCLK_FREQUENCY    72000000UL
-#define KINETIS_BUSCLK_FREQUENCY    36000000UL
-#define KINETIS_FLASHCLK_FREQUENCY  24000000UL
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0            TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0                TRUE
-#define KINETIS_USB_USB0_IRQ_PRIORITY       5
-
-/*
- * I2C driver settings
- */
-#define KINETIS_I2C_USE_I2C0                TRUE
-#define KINETIS_I2C_I2C0_PRIORITY           4
-
-#endif /* _MCUCONF_H_ */
diff --git a/keyboards/k_type/readme.md b/keyboards/k_type/readme.md
deleted file mode 100644
index 1118f8655e..0000000000
--- a/keyboards/k_type/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# Input Club K-Type
-
-Firmware for custom keyboard PCB with TKL Key Layout
-
-Keyboard Maintainer: [Kaleb Elwert](https://github.com/belak)  
-Hardware Supported: Input Club K-Type   
-Hardware Availability: [Input Club](https://input.club/k-type/), [Massdrop](https://www.massdrop.com/buy/massdrop-x-input-club-k-type-mechanical-keyboard?utm_source=linkshare&referer=WJJG5M)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make k_type:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk
deleted file mode 100644
index a1c56903b5..0000000000
--- a/keyboards/k_type/rules.mk
+++ /dev/null
@@ -1,73 +0,0 @@
-# project specific files
-SRC =	matrix.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-
-# This board was copied from PJRC_TEENSY_3_1. The only difference should be a
-# hack to ensure the watchdog has started before trying to disable it.
-BOARD = IC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootloader.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-OPT_DEFS =
-
-DFU_ARGS = -d 1c11:b007
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
-DEBUG_ENABLE = yes