diff options
| author | Drashna Jaelre <drashna@live.com> | 2019-04-09 08:58:11 -0700 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-04-09 08:58:11 -0700 |
| commit | b6850bc043b1d129042f47501f0a1dc1e196f962 (patch) | |
| tree | a0a772f278c3c494db3bc69103955af5561e1cae /keyboards/jj50 | |
| parent | 19ed62114a1f5d20aacb9cbe83105e977b9a2971 (diff) | |
remove all keyboards but ergodox and planck
Diffstat (limited to 'keyboards/jj50')
| -rw-r--r-- | keyboards/jj50/README.md | 83 | ||||
| -rw-r--r-- | keyboards/jj50/backlight.c | 213 | ||||
| -rw-r--r-- | keyboards/jj50/backlight_custom.h | 15 | ||||
| -rw-r--r-- | keyboards/jj50/breathing_custom.h | 140 | ||||
| -rw-r--r-- | keyboards/jj50/config.h | 51 | ||||
| -rw-r--r-- | keyboards/jj50/i2c.c | 104 | ||||
| -rw-r--r-- | keyboards/jj50/i2c.h | 25 | ||||
| -rw-r--r-- | keyboards/jj50/info.json | 13 | ||||
| -rw-r--r-- | keyboards/jj50/jj50.c | 94 | ||||
| -rw-r--r-- | keyboards/jj50/jj50.h | 46 | ||||
| -rw-r--r-- | keyboards/jj50/keymaps/archetype/README.md | 22 | ||||
| -rw-r--r-- | keyboards/jj50/keymaps/archetype/config.h | 8 | ||||
| -rw-r--r-- | keyboards/jj50/keymaps/archetype/keymap.c | 215 | ||||
| -rw-r--r-- | keyboards/jj50/keymaps/archetype/rules.mk | 65 | ||||
| -rw-r--r-- | keyboards/jj50/keymaps/default/keymap.c | 135 | ||||
| -rw-r--r-- | keyboards/jj50/matrix.c | 107 | ||||
| -rw-r--r-- | keyboards/jj50/rules.mk | 63 | ||||
| -rw-r--r-- | keyboards/jj50/usbconfig.h | 396 |
18 files changed, 0 insertions, 1795 deletions
diff --git a/keyboards/jj50/README.md b/keyboards/jj50/README.md deleted file mode 100644 index f7b8acc641..0000000000 --- a/keyboards/jj50/README.md +++ /dev/null @@ -1,83 +0,0 @@ -JJ50 -========================== - -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB keyboard](https://www.keyclack.com/product/gb-ps2avrgb/), for use on the JJ50, a preonic-like board. - -Most of the code was taken and amended from YMD96, which in itself was taken from ps2avrGB and amended by Andrew Novak. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -Hardware Supported: JJ50 with the ATmega32a chip. -Hardware Availability: [KPrepublic on AliExpress](https://www.aliexpress.com/item/jj50-v1-0-Custom-Mechanical-Keyboard-50-PCB-programmed-50-preonic-layouts-bface-firmware-with-rgb/32848915277.html) - -This version by [Wayne K. Jones](github.com/WarmCatUK). - - -## Installing and Building - -Make example for this keyboard (after setting up your build environment): - -``` -$ make jj50:default:program -``` -It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. -In addition you may need the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `././util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `Backspace` (`key below top right key`) to keep it -in the bootloader: - -``` -$ make jj50 -$ bootloadHID -r jj50_default.hex -``` -I dont use windows personally, but the following is from ymd96 regarding flashing the atmega32a: - -Since the JJ50 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme! -On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux or OSX you can simply use the terminal. - -Once you have those two pieces of software: -Build the keyboard with -``` -$ make jj50:default -``` -If you make your own layout, change the `default` word to whatever your layout is. - -And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding the key below the top right key, and click `find device`. Then you can specify the .hex file and flash it to the device. - - -## Troubleshooting - -1. Try plugging the board in while pressing `Backspace` (`Key below the top right key`). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` for more info. -4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, remove the previous build and simply force rebuild by making with: -``` -$ rm jj50_default.hex -$ make -B jj50:default -$ make -B jj50:default:program -``` - - - diff --git a/keyboards/jj50/backlight.c b/keyboards/jj50/backlight.c deleted file mode 100644 index fbd241fa9d..0000000000 --- a/keyboards/jj50/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj50/backlight_custom.h b/keyboards/jj50/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/jj50/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj50/breathing_custom.h b/keyboards/jj50/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/jj50/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj50/config.h b/keyboards/jj50/config.h deleted file mode 100644 index 0f09f02ff8..0000000000 --- a/keyboards/jj50/config.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Modified 2017 Andrew Novak <ndrw.nvk@gmail.com> -Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER kprepublic -#define PRODUCT jj50 -#define DESCRIPTION Preonic-like clone - -/* matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 -#define DIODE_DIRECTION ROW2COL - -//#define BACKLIGHT_PIN D4 -#define BACKLIGHT_LEVELS 12 - -#define RGB_DI_PIN E2 -#define RGBLED_NUM 12 -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 15 -#define RGBLIGHT_VAL_STEP 18 - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 - -#endif diff --git a/keyboards/jj50/i2c.c b/keyboards/jj50/i2c.c deleted file mode 100644 index c27f3e3d17..0000000000 --- a/keyboards/jj50/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the start condition was successfully transmitted - if ((TWSR & 0xF8) != TW_START) { - return 1; - } - - // transmit address and wait - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return 1; - } - - return 0; -} - -void i2c_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); -} - -uint8_t i2c_write(uint8_t data) { - TWDR = data; - - // transmit data and wait - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - - return 0; -} - -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { - if (i2c_start(address)) { - return 1; - } - - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) { - return 1; - } - } - - i2c_stop(); - - return 0; -} diff --git a/keyboards/jj50/i2c.h b/keyboards/jj50/i2c.h deleted file mode 100644 index 27c9d3d050..0000000000 --- a/keyboards/jj50/i2c.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/jj50/info.json b/keyboards/jj50/info.json deleted file mode 100644 index 97a4bffa0a..0000000000 --- a/keyboards/jj50/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "JJ50", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 5, - "layouts": { - "LAYOUT_ortho_5x12": { - "key_count": 60, - "layout": [{"label":"K011", "x":0, "y":0}, {"label":"K010", "x":1, "y":0}, {"label":"K009", "x":2, "y":0}, {"label":"K008", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K003", "x":8, "y":0}, {"label":"K002", "x":9, "y":0}, {"label":"K201", "x":10, "y":0}, {"label":"K000", "x":11, "y":0}, {"label":"K111", "x":0, "y":1}, {"label":"K110", "x":1, "y":1}, {"label":"K109", "x":2, "y":1}, {"label":"K108", "x":3, "y":1}, {"label":"K104", "x":4, "y":1}, {"label":"K105", "x":5, "y":1}, {"label":"K106", "x":6, "y":1}, {"label":"K107", "x":7, "y":1}, {"label":"K103", "x":8, "y":1}, {"label":"K102", "x":9, "y":1}, {"label":"K001", "x":10, "y":1}, {"label":"K100", "x":11, "y":1}, {"label":"K211", "x":0, "y":2}, {"label":"K210", "x":1, "y":2}, {"label":"K209", "x":2, "y":2}, {"label":"K208", "x":3, "y":2}, {"label":"K204", "x":4, "y":2}, {"label":"K205", "x":5, "y":2}, {"label":"K206", "x":6, "y":2}, {"label":"K207", "x":7, "y":2}, {"label":"K203", "x":8, "y":2}, {"label":"K202", "x":9, "y":2}, {"label":"K101", "x":10, "y":2}, {"label":"K200", "x":11, "y":2}, {"label":"K311", "x":0, "y":3}, {"label":"K310", "x":1, "y":3}, {"label":"K309", "x":2, "y":3}, {"label":"K308", "x":3, "y":3}, {"label":"K304", "x":4, "y":3}, {"label":"K305", "x":5, "y":3}, {"label":"K306", "x":6, "y":3}, {"label":"K307", "x":7, "y":3}, {"label":"K303", "x":8, "y":3}, {"label":"K302", "x":9, "y":3}, {"label":"K301", "x":10, "y":3}, {"label":"K300", "x":11, "y":3}, {"label":"K411", "x":0, "y":4}, {"label":"K410", "x":1, "y":4}, {"label":"K409", "x":2, "y":4}, {"label":"K408", "x":3, "y":4}, {"label":"K404", "x":4, "y":4}, {"label":"K405", "x":5, "y":4}, {"label":"K406", "x":6, "y":4}, {"label":"K407", "x":7, "y":4}, {"label":"K403", "x":8, "y":4}, {"label":"K402", "x":9, "y":4}, {"label":"K401", "x":10, "y":4}, {"label":"K400", "x":11, "y":4}] - } - } -} diff --git a/keyboards/jj50/jj50.c b/keyboards/jj50/jj50.c deleted file mode 100644 index d4a70f68d0..0000000000 --- a/keyboards/jj50/jj50.c +++ /dev/null @@ -1,94 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "jj50.h" - -#include <avr/pgmspace.h> - -#include "action_layer.h" -#include "i2c.h" -#include "quantum.h" - -#include "backlight.h" -#include "backlight_custom.h" - -// for keyboard subdirectory level init functions -// @Override -void matrix_init_kb(void) { - // call user level keymaps, if any - matrix_init_user(); -} - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i=0; i<RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); - rgb_init = true; - } - - rgblight_task(); -#else - void matrix_scan_kb(void) { -#endif - matrix_scan_user(); - /* Nothing else for now. */ - } - - __attribute__((weak)) // overridable - void matrix_init_user(void) { - - } - - __attribute__((weak)) // overridable - void matrix_scan_user(void) { - - } diff --git a/keyboards/jj50/jj50.h b/keyboards/jj50/jj50.h deleted file mode 100644 index 8a904897e6..0000000000 --- a/keyboards/jj50/jj50.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Modified 2017 Andrew Novak <ndrw.nvk@gmail.com> -Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include "quantum.h" -#include "quantum_keycodes.h" -#include "keycode.h" -#include "action.h" - -void matrix_init_user(void); - -#define LAYOUT_ortho_5x12( \ - K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \ - K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \ - K211, K210, K209, K208, K204, K205, K206, K207, K203, K202, K101, K200, \ - K311, K310, K309, K308, K304, K305, K306, K307, K303, K302, K301, K300, \ - K411, K410, K409, K408, K404, K405, K406, K407, K403, K402, K401, K400 \ -) { \ - { K100, K001, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, }, \ - { K200, K101, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, }, \ - { K000, K201, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411 } \ -} - -#define LAYOUT LAYOUT_ortho_5x12 - -#endif diff --git a/keyboards/jj50/keymaps/archetype/README.md b/keyboards/jj50/keymaps/archetype/README.md deleted file mode 100644 index a2ae4e9123..0000000000 --- a/keyboards/jj50/keymaps/archetype/README.md +++ /dev/null @@ -1,22 +0,0 @@ -# archetype keymap for jj50 keyboards -A keymap that can be used with the jj50 ortholinear keyboard. - -## Features - -- `QWERTY` layout (Default) -- `COLEMAK` layout -- `FN` layout (various keys that are rarely needed) -- `FX` layout (Control lighting and audio) -- Use `Left Ctrl` and `Left Alt` to output `()`, `[]` and `{}` by tapping once, twice or thrice respectively. Hold them down for the regular keycode (LCtrl or LAlt) -- `Right Shift` when held or Enter when tapped -- Auto-Shift enabled (long press on alphas and numeric keys outputs shifted character) -- Full arrow keys available - - -## Feedback - -I made this keymap based on the existing default one. If you happen to use this keymap [drop me a line](mailto://idimitrakopoulos@gmail.com) about what could be improved etc - -Enjoy! - -Iason Dimitrakopoulos diff --git a/keyboards/jj50/keymaps/archetype/config.h b/keyboards/jj50/keymaps/archetype/config.h deleted file mode 100644 index 7955796eaf..0000000000 --- a/keyboards/jj50/keymaps/archetype/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#pragma once - -#undef AUTO_SHIFT_TIMEOUT -#undef TAPPING_TERM - -#define AUTO_SHIFT_TIMEOUT 150 -#define TAPPING_TERM 150 -//#define BOOTMAGIC_KEY_SALT KC_LCTL diff --git a/keyboards/jj50/keymaps/archetype/keymap.c b/keyboards/jj50/keymaps/archetype/keymap.c deleted file mode 100644 index 0704943e08..0000000000 --- a/keyboards/jj50/keymaps/archetype/keymap.c +++ /dev/null @@ -1,215 +0,0 @@ -/* -Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Modified 2017 Andrew Novak <ndrw.nvk@gmail.com> -Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> -Modified 2019 Iason Dimitrakopoulos (idimitrakopoulos) <idimitrakopoulos@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public LicensezZZ -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "rgblight.h" -#include "quantum.h" - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _FN 2 -#define _FX 3 - -enum { - TD_BSPC_DEL = 0, - TD_LCTL_LBRC = 1, - TD_LALT_RBRC = 2, -}; - - -void left_brackets(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->interrupted || !state->pressed) { - register_mods(MOD_LSFT); - register_code(KC_9); - } else { - register_mods(MOD_LCTL); - } - } else if (state->count == 2) { - register_code(KC_LBRC); - } else if (state->count == 3) { - register_mods(MOD_LSFT); - register_code(KC_LBRC); - } -} - -void left_brackets_reset(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->interrupted || !state->pressed) { - unregister_mods(MOD_LSFT); - unregister_code(KC_9); - } else { - unregister_mods(MOD_LCTL); - } - } else if (state->count == 2) { - unregister_code(KC_LBRC); - } else if (state->count == 3) { - unregister_mods(MOD_LSFT); - unregister_code(KC_LBRC); - } -} - -void right_brackets(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->interrupted || !state->pressed) { - register_mods(MOD_LSFT); - register_code(KC_0); - } else { - register_mods(MOD_LALT); - } - } else if (state->count == 2) { - register_code(KC_RBRC); - } else if (state->count == 3) { - register_mods(MOD_LSFT); - register_code(KC_RBRC); - } -} - -void right_brackets_reset(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->interrupted || !state->pressed) { - unregister_mods(MOD_LSFT); - unregister_code(KC_0); - } else { - unregister_mods(MOD_LALT); - } - } else if (state->count == 2) { - unregister_code(KC_RBRC); - } else if (state->count == 3) { - unregister_mods(MOD_LSFT); - unregister_code(KC_RBRC); - } -} - -qk_tap_dance_action_t tap_dance_actions[] = { - // Single tap = Backspace | Double tap = Delete - [TD_BSPC_DEL] = ACTION_TAP_DANCE_DOUBLE(KC_BSPC, KC_DEL), - // Single tap = ( | Double tap = [ | Triple tap = { | Single hold = KC_LCTL - [TD_LCTL_LBRC] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, left_brackets, left_brackets_reset), - // Single tap = ) | Double tap = ] | Triple tap = } | Single hold = KC_LALT - [TD_LALT_RBRC] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, right_brackets, right_brackets_reset), -}; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( \ - - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+. - //| | | | | | | | | | | | | - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_SLSH, KC_UP, SFT_T(KC_ENT), \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - TD(TD_LCTL_LBRC), KC_LGUI, TD(TD_LALT_RBRC), _______, _______, LT(_FN, KC_SPC), LT(_FN, KC_SPC), _______, KC_COMM, KC_LEFT, KC_DOWN, KC_RGHT \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' - ), - - [_COLEMAK] = LAYOUT( \ - - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+. - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, KC_R, KC_S, KC_T, KC_D, _______, KC_N, KC_E, KC_I, KC_O, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, KC_K, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' - ), - - [_FN] = LAYOUT( \ - - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+. - //| | | | | | | | | | | | | - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_EQUAL, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINUS, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' - ), - - [_FX] = LAYOUT( \ - - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+. - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, BL_ON, BL_INC, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, BL_OFF, BL_DEC, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, RGB_TOG, BL_STEP, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, _______, _______, \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| - //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - //| | | | | | | | | | | | | - //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' - ), - - -}; diff --git a/keyboards/jj50/keymaps/archetype/rules.mk b/keyboards/jj50/keymaps/archetype/rules.mk deleted file mode 100644 index e32e8ce741..0000000000 --- a/keyboards/jj50/keymaps/archetype/rules.mk +++ /dev/null @@ -1,65 +0,0 @@ -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = lite -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes -NKRO_ENABLE = no -# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -TAP_DANCE_ENABLE = yes -AUTO_SHIFT_ENABLE = yes - - -DISABLE_WS2812 = no - -KEY_LOCK_ENABLE = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - - -#OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex - -LAYOUTS = ortho_5x12 diff --git a/keyboards/jj50/keymaps/default/keymap.c b/keyboards/jj50/keymaps/default/keymap.c deleted file mode 100644 index d5334d4956..0000000000 --- a/keyboards/jj50/keymaps/default/keymap.c +++ /dev/null @@ -1,135 +0,0 @@ -/* -Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Modified 2017 Andrew Novak <ndrw.nvk@gmail.com> -Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public LicensezZZ -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -#define ______ KC_TRNS -#define _DEFLT 0 -#define _RAISE 1 -#define _LOWER 2 -#define _FN 3 - -enum custom_keycodes { - P_MACRO = SAFE_RANGE -}; - -// GBP £ Macro (sends alt 156 - windows users only) -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case P_MACRO: - SEND_STRING(SS_DOWN(X_LALT)); - SEND_STRING(SS_TAP(X_KP_1)); - SEND_STRING(SS_TAP(X_KP_5)); - SEND_STRING(SS_TAP(X_KP_6)); - SEND_STRING(SS_UP(X_LALT)); - return false; break; - } - } - return true; -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | (Hold for shift / tap for enter) - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | _FN | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_DEFLT] = LAYOUT( \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT),\ - MO(_FN), KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER),KC_SPC,KC_SPC,MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | [ | ] | \ | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | |ISO # |ISO / | PUP | PDN | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - - [_RAISE] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - RESET, BL_INC, RGB_SAI, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, BL_DEC, _______, _______, _______, _______, _______, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \ - RGB_TOG, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | { | } | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | |ISO ~ |ISO | | HOM | END | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - - [_LOWER] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, _______, _______, _______, _______, _______, _______,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \ - BL_STEP, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ - ), - - /* Fn - * ,-----------------------------------------------------------------------------------. - * | | | £ | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | |BL_OFF|BL_DEC|BL_INC|BL_ON | - * `-----------------------------------------------------------------------------------' - */ - [_FN] = LAYOUT( \ - _______, _______, P_MACRO, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, BL_OFF, BL_DEC, BL_INC, BL_ON \ - ) -}; diff --git a/keyboards/jj50/matrix.c b/keyboards/jj50/matrix.c deleted file mode 100644 index 95c6057e7c..0000000000 --- a/keyboards/jj50/matrix.c +++ /dev/null @@ -1,107 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Modified 2018 by Wayne K Jones <github.com/WarmCatUK> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/delay.h> - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - //----> DDRD &= ~(1<<PIND7); - // Port D not used on this keyboard - // all columns are pulled-up - PORTA = 0xFF; - PORTC |= (0b111111<<2); - //PORTD |= (1<<PIND7); - // Port D not used on this keyboard - - // initialize matrix state: all keys off - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0x00; - matrix_debouncing[row] = 0x00; - } - matrix_init_quantum(); // missing from original port by Luiz -} - -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - matrix_scan_quantum(); // also missing in original PS2AVRGB implementation - //matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/jj50/rules.mk b/keyboards/jj50/rules.mk deleted file mode 100644 index 4ee5719185..0000000000 --- a/keyboards/jj50/rules.mk +++ /dev/null @@ -1,63 +0,0 @@ -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com> - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = yes -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes -NKRO_ENABLE = no -# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work - - -DISABLE_WS2812 = no - -KEY_LOCK_ENABLE = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - - -#OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - -LAYOUTS = ortho_5x12 diff --git a/keyboards/jj50/usbconfig.h b/keyboards/jj50/usbconfig.h deleted file mode 100644 index 59f29d04dd..0000000000 --- a/keyboards/jj50/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'K', 'P', 'R', 'e', 'p', 'u', 'b', 'l', 'i', 'c' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'J','J','5','0',' ','K','e','y','b','o','a','r','d' -#define USB_CFG_DEVICE_NAME_LEN 13 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ |