remove all keyboards but ergodox and planck

11 files changed, 0 insertions, 405 deletions

diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h
deleted file mode 100644
index 70648d2f53..0000000000
--- a/keyboards/jd40/config.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    geekhack
-#define PRODUCT         jd40v2
-#define DESCRIPTION     t.m.k. keyboard firmware for JD40 MKII
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
-#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12         // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-#endif
diff --git a/keyboards/jd40/info.json b/keyboards/jd40/info.json
deleted file mode 100644
index 4d321ee356..0000000000
--- a/keyboards/jd40/info.json
+++ /dev/null
@@ -1,57 +0,0 @@
-{
-  "keyboard_name": "jd40",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 12,
-  "height": 4,
-  "layouts": {
-    "LAYOUT": {
-      "layout": [
-        { "label": "Esc", "x": 0, "y": 0 },
-        { "label": "Q", "x": 1, "y": 0 },
-        { "label": "W", "x": 2, "y": 0 },
-        { "label": "E", "x": 3, "y": 0 },
-        { "label": "R", "x": 4, "y": 0 },
-        { "label": "T", "x": 5, "y": 0 },
-        { "label": "Y", "x": 6, "y": 0 },
-        { "label": "U", "x": 7, "y": 0 },
-        { "label": "I", "x": 8, "y": 0 },
-        { "label": "O", "x": 9, "y": 0 },
-        { "label": "P", "x": 10, "y": 0 },
-        { "label": "Back<br>Space", "x": 11, "y": 0 },
-        { "label": "Tab", "x": 0, "y": 1, "w": 1.25 },
-        { "label": "A", "x": 1.25, "y": 1 },
-        { "label": "S", "x": 2.25, "y": 1 },
-        { "label": "D", "x": 3.25, "y": 1 },
-        { "label": "F", "x": 4.25, "y": 1 },
-        { "label": "G", "x": 5.25, "y": 1 },
-        { "label": "H", "x": 6.25, "y": 1 },
-        { "label": "J", "x": 7.25, "y": 1 },
-        { "label": "K", "x": 8.25, "y": 1 },
-        { "label": "L", "x": 9.25, "y": 1 },
-        { "label": "Enter", "x": 10.25, "y": 1, "w": 1.75 },
-        { "label": "Shift", "x": 0, "y": 2, "w": 1.75 },
-        { "label": "Z", "x": 1.75, "y": 2 },
-        { "label": "X", "x": 2.75, "y": 2 },
-        { "label": "C", "x": 3.75, "y": 2 },
-        { "label": "V", "x": 4.75, "y": 2 },
-        { "label": "B", "x": 5.75, "y": 2 },
-        { "label": "N", "x": 6.75, "y": 2 },
-        { "label": "M", "x": 7.75, "y": 2 },
-        { "label": "<", "x": 8.75, "y": 2 },
-        { "label": "Shift", "x": 9.75, "y": 2, "w": 1.25 },
-        { "label": ">", "x": 11, "y": 2 },
-        { "label": "Ctrl", "x": 0, "y": 3 },
-        { "label": "Fn", "x": 1, "y": 3 },
-        { "label": "Alt", "x": 2, "y": 3 },
-        { "label": "Super", "x": 3, "y": 3, "w": 1.25 },
-        { "x": 4.25, "y": 3, "w": 1.75 },
-        { "x": 6, "y": 3, "w": 1.75 },
-        { "label": "Menu", "x": 7.75, "y": 3, "w": 1.25 },
-        { "label": "Alt", "x": 9, "y": 3 },
-        { "label": "Fn2", "x": 10, "y": 3 },
-        { "label": "Ctrl", "x": 11, "y": 3 }
-      ]
-    }
-  }
-}
diff --git a/keyboards/jd40/jd40.c b/keyboards/jd40/jd40.c
deleted file mode 100644
index fa06356d97..0000000000
--- a/keyboards/jd40/jd40.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include "jd40.h"
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	
-
-  //  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-	//	gh60_caps_led_on();
-	//	} else {
-	//	gh60_caps_led_off(); 
-  //  }
-	
-    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-		// gh60_esc_led_on();
-		// } else {
-		// gh60_esc_led_off(); 
-    // }
-	
-    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-		// gh60_fn_led_on();
-		// } else {
-		// gh60_fn_led_off(); 	
-    // }
-
-	led_set_user(usb_led);	
-}
diff --git a/keyboards/jd40/jd40.h b/keyboards/jd40/jd40.h
deleted file mode 100644
index 3ed6149f05..0000000000
--- a/keyboards/jd40/jd40.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef JD40_H
-#define JD40_H
-
-#include "quantum.h"
-#include "led.h"
-
-/* GH60 LEDs
- *   GPIO pads
- *   0 F7 WASD LEDs
- *   1 F6 ESC LED
- *   2 F5 FN LED
- *   3 F4 POKER Arrow LEDs
- *   B2 Capslock LED
- *   B0 not connected
- */
-
- /*
-inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
-
-inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
-*/
-
-/* JD40 MKII keymap definition macro
- */
-#define LAYOUT_kc( \
-    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \
-	K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \
-	K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, \
-	K35, K36, K37, K38, K39, K40, K41, K42, K43, K44 \
-) { \
-    { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12 }, \
-    { KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_NO    }, \
-    { KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO    }, \
-    { KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_NO,    KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_NO    }  \
-}
-
-#define LAYOUT( \
-    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \
-	K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \
-	K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, \
-	K35, K36, K37, K38, K39, K40, K41, K42, K43, K44 \
-) { \
-    { K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12 }, \
-    { K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, KC_NO    }, \
-    { K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, KC_NO    }, \
-    { K35, K36, K37, K38, K39, KC_NO,    K40, K41, K42, K43, K44, KC_NO    }  \
-}
-
-#endif
diff --git a/keyboards/jd40/keymaps/default/keymap.c b/keyboards/jd40/keymaps/default/keymap.c
deleted file mode 100644
index ff31fd6f58..0000000000
--- a/keyboards/jd40/keymaps/default/keymap.c
+++ /dev/null
@@ -1,53 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _AL 1
-#define _FL 2
-#define _UL 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_BL] = LAYOUT(
-        KC_F12,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-        KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   KC_DOT,
-        KC_LCTL, KC_LGUI, KC_LALT, MO(_AL), KC_SPC,  KC_SPC,  MO(_AL), KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-    [_AL] = LAYOUT(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
-        KC_CAPS, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
-        _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_PGUP, KC_QUOT,
-        _______, _______, _______, _______, TG(_UL), TG(_UL), _______, KC_HOME, KC_PGDN, KC_END
-    ),
-
-    [_FL] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    ),
-
-    [_UL] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    ),
-};
-
-void matrix_scan_user(void) {
-  // Layer LED indicators
-  // ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
-  uint32_t layer = layer_state;
-  if (layer & (1 << 1)) {
-      //gh60_wasd_leds_on();
-  } else {
-      //gh60_wasd_leds_off();
-  }
-
-  if (layer & (1 << 2)) {
-      //gh60_esc_led_on();
-  } else {
-      //gh60_esc_led_off();
-  }
-};
diff --git a/keyboards/jd40/keymaps/vanagon/README.md b/keyboards/jd40/keymaps/vanagon/README.md
deleted file mode 100644
index 09a4e23a6e..0000000000
--- a/keyboards/jd40/keymaps/vanagon/README.md
+++ /dev/null
@@ -1,17 +0,0 @@
-Vanagon
-===
-Port of [evangs'](https://thevankeyboards.com) [MiniVan layout](https://www.massdrop.com/talk/115/where-did-all-my-keys-go-a-look-into-the-function-layers-of-the-mini-van) to the JD40. Includes colon/semicolon support, which is missing from the MiniVan layout.
-
-This layout uses a 44 key configuration similar to the following:
-
-```
-,------+------+------+------+------+------+------+------+------+------+------+------.
-|      |      |      |      |      |      |      |      |      |      |      |      |
-|------`------`------`------`------`------`------`------`------`------`------`------|
-|       |      |      |      |      |      |      |      |      |      |            |
-|-------`------`------`------`------`------`------`------`------`------`------------|
-|         |      |      |      |      |      |       |      |      |      |         |
-|---------`------`------`------`------`------'-------`------`------`------`---------|
-|      |      |      |       |            |            |       |      |      |      |
-`------+------+------+-------+----^^^-----+----^^^-----+-------+------+------+------'
-```
diff --git a/keyboards/jd40/keymaps/vanagon/config.h b/keyboards/jd40/keymaps/vanagon/config.h
deleted file mode 100644
index ed09b50ee4..0000000000
--- a/keyboards/jd40/keymaps/vanagon/config.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "../../config.h"
-
-#define LAYOUT_VANAGON(\
-	K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \
-	K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \
-	K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, \
-	K35, K36, K37, K38, K39, K40, K41, K42, K43, K44 \
-) { \
-	{ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12 }, \
-	{ K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 }, \
-	{ K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34 }, \
-	{ K35, K36, K37, K38, K39, KC_NO, K40, K41, K42, K43, K44 } \
-}
diff --git a/keyboards/jd40/keymaps/vanagon/keymap.c b/keyboards/jd40/keymaps/vanagon/keymap.c
deleted file mode 100644
index e16a44af33..0000000000
--- a/keyboards/jd40/keymaps/vanagon/keymap.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "action_layer.h"
-
-enum
-{
-    _BL = 0,
-    _AL1,
-    _AL2,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_BL] = LAYOUT_VANAGON(
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
-        MO(_AL1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, MO(_AL1),
-        KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
-        MO(_AL2), KC_LCTL, KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_RGUI, KC_RALT, KC_RSPC, MO(_AL2)),
-    [_AL1] = LAYOUT_VANAGON(
-        KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_TRNS,
-        KC_TRNS, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_COLN, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_TRNS,
-        KC_TRNS, KC_ESC, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-    [_AL2] = LAYOUT_VANAGON(
-        KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
-        KC_TRNS, KC_PIPE, KC_DQT, KC_UNDS, KC_PLUS, KC_SCLN, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)};
diff --git a/keyboards/jd40/keymaps/vanagon/rules.mk b/keyboards/jd40/keymaps/vanagon/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/jd40/keymaps/vanagon/rules.mk
+++ /dev/null
diff --git a/keyboards/jd40/readme.md b/keyboards/jd40/readme.md
deleted file mode 100644
index 3a92b8fb89..0000000000
--- a/keyboards/jd40/readme.md
+++ /dev/null
@@ -1,14 +0,0 @@
-JD40
-===
-
-A compact 40% keyboard.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: JD40 PCB  
-Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/jd40-mkii-1up-keyboards-logo-pcb/), [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452), [originative](https://www.originativeco.com/products/jd40-pcb)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make jd40:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk
deleted file mode 100644
index 2bce6d2a2d..0000000000
--- a/keyboards/jd40/rules.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
-# COMMAND_ENABLE = yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE = YES			# MIDI controls
-# UNICODE_ENABLE = YES		# Unicode
-# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
\ No newline at end of file