remove all keyboards but ergodox and planck

7 files changed, 0 insertions, 308 deletions

diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h
deleted file mode 100644
index c597494c41..0000000000
--- a/keyboards/handwired/numpad20/config.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xBB80
-#define PRODUCT_ID      0x0504
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Hexwire
-#define PRODUCT         Numpad 20
-#define DESCRIPTION     Handwired 4x5 numpad
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F6, B1, B3, B6, B5 }
-#define MATRIX_COL_PINS { D1, D0, F5, F4 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/handwired/numpad20/info.json b/keyboards/handwired/numpad20/info.json
deleted file mode 100644
index 691acb3150..0000000000
--- a/keyboards/handwired/numpad20/info.json
+++ /dev/null
@@ -1,33 +0,0 @@
-{
-  "keyboard_name": "numpad20 handwired",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 4,
-  "height": 5,
-  "layouts": {
-    "LAYOUT": {
-      "layout": [
-        {"label":"K00", "x":0, "y":0},
-        {"label":"K01", "x":1, "y":0},
-        {"label":"K02", "x":2, "y":0},
-        {"label":"K03", "x":3, "y":0},
-        {"label":"K10", "x":0, "y":1},
-        {"label":"K11", "x":1, "y":1},
-        {"label":"K12", "x":2, "y":1},
-        {"label":"K13", "x":3, "y":1},
-        {"label":"K20", "x":0, "y":2},
-        {"label":"K21", "x":1, "y":2},
-        {"label":"K22", "x":2, "y":2},
-        {"label":"K23", "x":3, "y":2},
-        {"label":"K30", "x":0, "y":3},
-        {"label":"K31", "x":1, "y":3},
-        {"label":"K32", "x":2, "y":3},
-        {"label":"K33", "x":3, "y":3},
-        {"label":"K40", "x":0, "y":4},
-        {"label":"K41", "x":1, "y":4},
-        {"label":"K42", "x":2, "y":4},
-        {"label":"K43", "x":3, "y":4}
-      ]
-    }
-  }
-}
diff --git a/keyboards/handwired/numpad20/keymaps/default/keymap.c b/keyboards/handwired/numpad20/keymaps/default/keymap.c
deleted file mode 100644
index 414b104afd..0000000000
--- a/keyboards/handwired/numpad20/keymaps/default/keymap.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT(
-    KC_LEFT, KC_RGHT, KC_UP,   KC_DOWN, \
-    KC_P7,   KC_P8,   KC_P9,   KC_PLUS, \
-    KC_P4,   KC_P5,   KC_P6,   KC_MINS, \
-    KC_P1,   KC_P2,   KC_P3,   KC_ENT, \
-    KC_P0,   KC_DOT,  KC_RGHT, KC_TAB \
-  )
-};
diff --git a/keyboards/handwired/numpad20/numpad20.c b/keyboards/handwired/numpad20/numpad20.c
deleted file mode 100644
index 101cf2cb4b..0000000000
--- a/keyboards/handwired/numpad20/numpad20.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "numpad20.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
diff --git a/keyboards/handwired/numpad20/numpad20.h b/keyboards/handwired/numpad20/numpad20.h
deleted file mode 100644
index c15aa9ac70..0000000000
--- a/keyboards/handwired/numpad20/numpad20.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef NUMPAD20_H
-#define NUMPAD20_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
-    K00, K01, K02, K03, \
-    K10, K11, K12, K13, \
-    K20, K21, K22, K23, \
-    K30, K31, K32, K33, \
-    K40, K41, K42, K43 \
-    ) { \
-  { K00, K01, K02, K03 },  \
-  { K10, K11, K12, K13 },  \
-  { K20, K21, K22, K23 },  \
-  { K30, K31, K32, K33 },  \
-  { K40, K41, K42, K43 }   \
-}
-
-#endif
diff --git a/keyboards/handwired/numpad20/readme.md b/keyboards/handwired/numpad20/readme.md
deleted file mode 100644
index 4e14fbb005..0000000000
--- a/keyboards/handwired/numpad20/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# numpad20 handwired
-
-Custom handwired 20 key numpad.
-
-Keyboard Maintainer: [Danny](https://github.com/nooges)  
-Hardware Supported: Custom handwired 20 key numpad  
-Hardware Availability: 
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/numpad20:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file
diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk
deleted file mode 100644
index 361b2e93af..0000000000
--- a/keyboards/handwired/numpad20/rules.mk
+++ /dev/null
@@ -1,67 +0,0 @@
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
\ No newline at end of file