remove all keyboards but ergodox and planck

6 files changed, 0 insertions, 201 deletions

diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h
deleted file mode 100644
index e113597dc2..0000000000
--- a/keyboards/handwired/jotpad16/config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Jotix
-#define PRODUCT         JotPad16
-#define DESCRIPTION     A Jotantastic compact NumPad
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 4
-
-/* pro_micro pin-out */
-#define MATRIX_ROW_PINS { B6, B2, D2, D3 }
-#define MATRIX_COL_PINS { B5, B4, B3, B1 }
-#define UNUSED_PINS
-
-/* leds */
-#define QMK_LED E6
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_PIN D7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 0
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
diff --git a/keyboards/handwired/jotpad16/jotpad16.c b/keyboards/handwired/jotpad16/jotpad16.c
deleted file mode 100644
index 512234b917..0000000000
--- a/keyboards/handwired/jotpad16/jotpad16.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "jotpad16.h"
-
-void matrix_init_kb(void) {
-
-	matrix_init_user();
-}
diff --git a/keyboards/handwired/jotpad16/jotpad16.h b/keyboards/handwired/jotpad16/jotpad16.h
deleted file mode 100644
index 012c9290dd..0000000000
--- a/keyboards/handwired/jotpad16/jotpad16.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-// Used to create a keymap using only KC_ prefixed keys
-#define LAYOUT_ortho_4x4( \
-	k00, k01, k02, k03, \
-	k10, k11, k12, k13, \
-	k20, k21, k22, k23, \
-	k30, k31, k32, k33 \
-) \
-{ \
-	{ k00, k01, k02, k03 }, \
-	{ k10, k11, k12, k13 }, \
-	{ k20, k21, k22, k23 }, \
-	{ k30, k31, k32, k33 } \
-}
-
diff --git a/keyboards/handwired/jotpad16/keymaps/default/keymap.c b/keyboards/handwired/jotpad16/keymaps/default/keymap.c
deleted file mode 100644
index fb5dc71e23..0000000000
--- a/keyboards/handwired/jotpad16/keymaps/default/keymap.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _NUMPAD 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Numpad
- * +-------+-------+-------+-------+
- * |   7   |   8   |   9   |   -   |
- * +-------+-------+-------+-------+
- * |   4   |   5   |   6   |   +   |
- * +-------+-------+-------+-------+
- * |   1   |   2   |   3   | enter |
- * +-------+-------+-------+-------+
- * |   0   |   .   |   /   |   *   |
- * +-------+-------+-------+-------+
- */
-[_NUMPAD] = LAYOUT_ortho_4x4( 
-    KC_P7,  KC_P8,  KC_P9,  KC_MINS,
-    KC_P4,  KC_P5,  KC_P6,  KC_PLUS,
-    KC_P1,  KC_P2,  KC_P3,  KC_PENT,
-    KC_P0,  KC_PDOT,KC_PSLS,KC_ASTR 
-),
-};
diff --git a/keyboards/handwired/jotpad16/readme.md b/keyboards/handwired/jotpad16/readme.md
deleted file mode 100644
index 3d971a5154..0000000000
--- a/keyboards/handwired/jotpad16/readme.md
+++ /dev/null
@@ -1,39 +0,0 @@
-# JotPad16
-
-![JotPad16](https://i.imgur.com/RwmqWuS.jpg)
-
-A ortholinear keypad (4x4) made by jotix.
-
-Keyboard Maintainer: [jotix](https://github.com/jotix)  
-Hardware Supported: Arduino Pro Micro  
-
-### Arduino Pro Micro Pinout
-
-| rows        | 0  | 1  | 2   | 3   |
-|-------------|----|----|-----|-----|
-| arduino pin | 10 | 16 | RXI | TX0 |
-| qmk pin     | B6 | B2 | D2  | D3  |
-
-| columns     | 0  | 1  | 2  | 3  |
-|-------------|----|----|----|----| 
-| arduino pin | 9  | 8  | 14 | 15 |
-| qmk pin     | B5 | B4 | B3 | C3 |
-
-|             | QMK led   | Backlight |
-|-------------|-----------|-----------|
-| Arduino pin | 7         | 6         |
-| qmk pin     | E6        | D7        |
-
-### Compiling the Firmware
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/jotpad16:default
-
-### The Default Keymap
-
-![Default Keymap](https://i.imgur.com/VJZcFRN.jpg)
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-
diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk
deleted file mode 100644
index 8105f800cb..0000000000
--- a/keyboards/handwired/jotpad16/rules.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
-API_SYSEX_ENABLE = no
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-LAYOUTS = ortho_4x4