Remove handwired/bluepill. (#11415)

13 files changed, 0 insertions, 1943 deletions

diff --git a/keyboards/handwired/bluepill/bluepill70/.noci b/keyboards/handwired/bluepill/bluepill70/.noci
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/.noci
+++ /dev/null
diff --git a/keyboards/handwired/bluepill/bluepill70/bluepill70.c b/keyboards/handwired/bluepill/bluepill70/bluepill70.c
deleted file mode 100644
index 511c602d45..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/bluepill70.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "bluepill70.h"
\ No newline at end of file
diff --git a/keyboards/handwired/bluepill/bluepill70/bluepill70.h b/keyboards/handwired/bluepill/bluepill70/bluepill70.h
deleted file mode 100644
index 8a313cc500..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/bluepill70.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#pragma once
-#include "bluepill.h"
-//  Modified by Xydane
-//	#define LAYOUT(k00) {{ k00 }}
\ No newline at end of file
diff --git a/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h b/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h
deleted file mode 100644
index 46c37a25e9..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
diff --git a/keyboards/handwired/bluepill/bluepill70/chconf.h b/keyboards/handwired/bluepill/bluepill70/chconf.h
deleted file mode 100644
index 23af0349ce..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/chconf.h
+++ /dev/null
@@ -1,714 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    rt/templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION                16
-#endif
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY                 2000
-#endif
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE               32
-#endif
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE              32
-#endif
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA                 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM                 0
-#endif
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE                 0
-#endif
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM                       FALSE
-#endif
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY                 TRUE
-#endif
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT                 TRUE
-#endif
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES               TRUE
-#endif
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-#endif
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES                  TRUE
-#endif
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-#endif
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS                 TRUE
-#endif
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
-#endif
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS                   TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES                 TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-#endif
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES                TRUE
-#endif
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE                  TRUE
-#endif
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP                     TRUE
-#endif
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS                 FALSE
-#endif
-
-/**
- * @brief   Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS                FALSE
-#endif
-
-/**
- * @brief   Pipes APIs.
- * @details If enabled then the pipes APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES                    FALSE
-#endif
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC                  FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY                  FALSE
-#endif
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-#endif
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
-#endif
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
-#endif
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES           FALSE
-#endif
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES            FALSE
-#endif
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
-#endif
-
-/**
- * @brief   Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES                FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS                   FALSE
-#endif
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS                FALSE
-#endif
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-#endif
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-#endif
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS                 FALSE
-#endif
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING            FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/bluepill/bluepill70/config.h b/keyboards/handwired/bluepill/bluepill70/config.h
deleted file mode 100644
index ae00a470aa..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-
-//  Modified by Xydane
-#define MANUFACTURER "QMK"
-#define PRODUCT "BluePill70"
-#define DESCRIPTION "QMK keyboard firmware with ChibiOS"
-
-/* key matrix size */
-//  Modified by Xydane
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 15
-#define DIODE_DIRECTION COL2ROW
-
-// Iso fix for Space Cadet, comment for ANSI layouts
-#define LSPO_KEY KC_8
-#define RSPC_KEY KC_9
diff --git a/keyboards/handwired/bluepill/bluepill70/flash.sh b/keyboards/handwired/bluepill/bluepill70/flash.sh
deleted file mode 100644
index d001ff007e..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/flash.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/bash
-Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin
\ No newline at end of file
diff --git a/keyboards/handwired/bluepill/bluepill70/halconf.h b/keyboards/handwired/bluepill/bluepill70/halconf.h
deleted file mode 100644
index db65fadea3..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/halconf.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                         TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                         FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                         FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                         FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                         FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                         FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI                     FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         TRUE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL                      FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB                  FALSE
-#endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO                         FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                         FALSE
-#endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG                        FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                        FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                         TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                         FALSE
-#endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI                        FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS                   FALSE
-#endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT                        FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE                  TRUE
-#endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS           FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY                   FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS                      TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING                    TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY                      100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT                     FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING                    TRUE
-#endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20                    0x50FF8000U
-#endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR                        0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE              38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE             256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER           2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR                    FALSE
-#endif
-
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT                       FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION           FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                        TRUE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT                       TRUE
-#endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/bluepill/bluepill70/info.json b/keyboards/handwired/bluepill/bluepill70/info.json
deleted file mode 100644
index 3f08b50e55..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/info.json
+++ /dev/null
@@ -1,187 +0,0 @@
-{
-  "keyboard_name": "BluePill 70",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 16,
-  "height": 6,
-  "layouts": {
-    "LAYOUT_seventy_ansi": {
-      "layout": [
-        {"label":"Esc", "x":0, "y":0},
-        {"label":"F1", "x":1, "y":0},
-        {"label":"F2", "x":2, "y":0},
-        {"label":"F3", "x":3, "y":0},
-        {"label":"F4", "x":4, "y":0},
-        {"label":"F5", "x":5, "y":0},
-        {"label":"F6", "x":6, "y":0},
-        {"label":"F7", "x":7, "y":0},
-        {"label":"F8", "x":8, "y":0},
-        {"label":"F9", "x":9, "y":0},
-        {"label":"F10", "x":10, "y":0},
-        {"label":"F11", "x":11, "y":0},
-        {"label":"F12", "x":12, "y":0},
-        {"label":"Print Screen", "x":13, "y":0},
-        {"label":"Home", "x":14, "y":0},
-        {"label":"End", "x":15, "y":0},
-        {"label":"`", "x":0, "y":1},
-        {"label":"1", "x":1, "y":1},
-        {"label":"2", "x":2, "y":1},
-        {"label":"3", "x":3, "y":1},
-        {"label":"4", "x":4, "y":1},
-        {"label":"5", "x":5, "y":1},
-        {"label":"6", "x":6, "y":1},
-        {"label":"7", "x":7, "y":1},
-        {"label":"8", "x":8, "y":1},
-        {"label":"9", "x":9, "y":1},
-        {"label":"0", "x":10, "y":1},
-        {"label":"-", "x":11, "y":1},
-        {"label":"=", "x":12, "y":1},
-        {"label":"Backspace", "x":13, "y":1, "w":2},
-        {"label":"Delete", "x":15, "y":1},
-        {"label":"Tab", "x":0, "y":2, "w":1.5},
-        {"label":"Q", "x":1.5, "y":2},
-        {"label":"W", "x":2.5, "y":2},
-        {"label":"E", "x":3.5, "y":2},
-        {"label":"R", "x":4.5, "y":2},
-        {"label":"T", "x":5.5, "y":2},
-        {"label":"Y", "x":6.5, "y":2},
-        {"label":"U", "x":7.5, "y":2},
-        {"label":"I", "x":8.5, "y":2},
-        {"label":"O", "x":9.5, "y":2},
-        {"label":"P", "x":10.5, "y":2},
-        {"label":"[", "x":11.5, "y":2},
-        {"label":"]", "x":12.5, "y":2},
-        {"label":"Page Up", "x":15, "y":2},
-        {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
-        {"label":"A", "x":1.75, "y":3},
-        {"label":"S", "x":2.75, "y":3},
-        {"label":"D", "x":3.75, "y":3},
-        {"label":"F", "x":4.75, "y":3},
-        {"label":"G", "x":5.75, "y":3},
-        {"label":"H", "x":6.75, "y":3},
-        {"label":"J", "x":7.75, "y":3},
-        {"label":"K", "x":8.75, "y":3},
-        {"label":"L", "x":9.75, "y":3},
-        {"label":";", "x":10.75, "y":3},
-        {"label":"'", "x":11.75, "y":3},
-        {"label":"Enter", "x":12.75, "y":3, "w":2.25},
-        {"label":"\\", "x":13.5, "y":2, "w":1.5},
-        {"label":"Page Down", "x":15, "y":3},
-        {"label":"Shift", "x":0, "y":4, "w":1.25},
-        {"label":"ISO \\", "x":1.25, "y":4},
-        {"label":"Z", "x":2.25, "y":4},
-        {"label":"X", "x":3.25, "y":4},
-        {"label":"C", "x":4.25, "y":4},
-        {"label":"V", "x":5.25, "y":4},
-        {"label":"B", "x":6.25, "y":4},
-        {"label":"N", "x":7.25, "y":4},
-        {"label":"M", "x":8.25, "y":4},
-        {"label":",", "x":9.25, "y":4},
-        {"label":".", "x":10.25, "y":4},
-        {"label":"/", "x":11.25, "y":4},
-        {"label":"Shift", "x":12.25, "y":4, "w":1.75},
-        {"label":"Up", "x":14, "y":4},
-        {"label":"TT(2)", "x":15, "y":4},
-        {"label":"Ctrl", "x":0, "y":5, "w":1.25},
-        {"label":"GUI", "x":1.25, "y":5, "w":1.25},
-        {"label":"Alt", "x":2.5, "y":5, "w":1.25},
-        {"label":"Space", "x":3.75, "y":5, "w":6.25},
-        {"label":"Alt", "x":10, "y":5},
-        {"label":"Fn", "x":11, "y":5},
-        {"label":"Ctrl", "x":12, "y":5},
-        {"label":"Left", "x":13, "y":5},
-        {"label":"Down", "x":14, "y":5},
-        {"label":"Right", "x":15, "y":5}
-      ]
-    },
-    "LAYOUT_seventy_iso": {
-      "layout": [
-        {"label":"Esc", "x":0, "y":0},
-        {"label":"F1", "x":1, "y":0},
-        {"label":"F2", "x":2, "y":0},
-        {"label":"F3", "x":3, "y":0},
-        {"label":"F4", "x":4, "y":0},
-        {"label":"F5", "x":5, "y":0},
-        {"label":"F6", "x":6, "y":0},
-        {"label":"F7", "x":7, "y":0},
-        {"label":"F8", "x":8, "y":0},
-        {"label":"F9", "x":9, "y":0},
-        {"label":"F10", "x":10, "y":0},
-        {"label":"F11", "x":11, "y":0},
-        {"label":"F12", "x":12, "y":0},
-        {"label":"Print Screen", "x":13, "y":0},
-        {"label":"Home", "x":14, "y":0},
-        {"label":"End", "x":15, "y":0},
-        {"label":"`", "x":0, "y":1},
-        {"label":"1", "x":1, "y":1},
-        {"label":"2", "x":2, "y":1},
-        {"label":"3", "x":3, "y":1},
-        {"label":"4", "x":4, "y":1},
-        {"label":"5", "x":5, "y":1},
-        {"label":"6", "x":6, "y":1},
-        {"label":"7", "x":7, "y":1},
-        {"label":"8", "x":8, "y":1},
-        {"label":"9", "x":9, "y":1},
-        {"label":"0", "x":10, "y":1},
-        {"label":"-", "x":11, "y":1},
-        {"label":"=", "x":12, "y":1},
-        {"label":"Backspace", "x":13, "y":1, "w":2},
-        {"label":"Delete", "x":15, "y":1},
-        {"label":"Tab", "x":0, "y":2, "w":1.5},
-        {"label":"Q", "x":1.5, "y":2},
-        {"label":"W", "x":2.5, "y":2},
-        {"label":"E", "x":3.5, "y":2},
-        {"label":"R", "x":4.5, "y":2},
-        {"label":"T", "x":5.5, "y":2},
-        {"label":"Y", "x":6.5, "y":2},
-        {"label":"U", "x":7.5, "y":2},
-        {"label":"I", "x":8.5, "y":2},
-        {"label":"O", "x":9.5, "y":2},
-        {"label":"P", "x":10.5, "y":2},
-        {"label":"[", "x":11.5, "y":2},
-        {"label":"]", "x":12.5, "y":2},
-        {"label":"Page Up", "x":15, "y":2},
-        {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
-        {"label":"A", "x":1.75, "y":3},
-        {"label":"S", "x":2.75, "y":3},
-        {"label":"D", "x":3.75, "y":3},
-        {"label":"F", "x":4.75, "y":3},
-        {"label":"G", "x":5.75, "y":3},
-        {"label":"H", "x":6.75, "y":3},
-        {"label":"J", "x":7.75, "y":3},
-        {"label":"K", "x":8.75, "y":3},
-        {"label":"L", "x":9.75, "y":3},
-        {"label":";", "x":10.75, "y":3},
-        {"label":",", "x":11.75, "y":3},
-        {"label":"ISO #", "x":12.75, "y":3},
-        {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2},
-        {"label":"Page Down", "x":15, "y":3},
-        {"label":"Shift", "x":0, "y":4, "w":1.25},
-        {"label":"ISO \\", "x":1.25, "y":4},
-        {"label":"Z", "x":2.25, "y":4},
-        {"label":"X", "x":3.25, "y":4},
-        {"label":"C", "x":4.25, "y":4},
-        {"label":"V", "x":5.25, "y":4},
-        {"label":"B", "x":6.25, "y":4},
-        {"label":"N", "x":7.25, "y":4},
-        {"label":"M", "x":8.25, "y":4},
-        {"label":",", "x":9.25, "y":4},
-        {"label":".", "x":10.25, "y":4},
-        {"label":"/", "x":11.25, "y":4},
-        {"label":"Shift", "x":12.25, "y":4, "w":1.75},
-        {"label":"Up", "x":14, "y":4},
-        {"label":"TT(2)", "x":15, "y":4},
-        {"label":"Ctrl", "x":0, "y":5, "w":1.25},
-        {"label":"GUI", "x":1.25, "y":5, "w":1.25},
-        {"label":"Alt", "x":2.5, "y":5, "w":1.25},
-        {"label":"Space", "x":3.75, "y":5, "w":6.25},
-        {"label":"Alt", "x":10, "y":5},
-        {"label":"Fn", "x":11, "y":5},
-        {"label":"Ctrl", "x":12, "y":5},
-        {"label":"Left", "x":13, "y":5},
-        {"label":"Down", "x":14, "y":5},
-        {"label":"Right", "x":15, "y":5}
-      ]
-    }
-  }
-}
diff --git a/keyboards/handwired/bluepill/bluepill70/led.c b/keyboards/handwired/bluepill/bluepill70/led.c
deleted file mode 100644
index 81437fb5ec..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/led.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <hal.h>
-#include "led.h"
-
-
-void led_set(uint8_t usb_led){
-  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-    /* generic STM32F103C8T6 board */
-    #ifdef BOARD_GENERIC_STM32_F103
-      palClearPad(GPIOC, 13);
-    #endif
-  } else {
-    /* generic STM32F103C8T6 board */
-    #ifdef BOARD_GENERIC_STM32_F103
-      palSetPad(GPIOC, 13);
-    #endif
-  }
-}
-
-// inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-
-// inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
\ No newline at end of file
diff --git a/keyboards/handwired/bluepill/bluepill70/matrix.c b/keyboards/handwired/bluepill/bluepill70/matrix.c
deleted file mode 100644
index 4d281fe210..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/matrix.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <ch.h>
-#include <hal.h>
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-//#include "pwm.c"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-inline uint8_t matrix_rows(void){
-  return MATRIX_ROWS;
-}
-
-inline uint8_t matrix_cols(void){
-  return MATRIX_COLS;
-}
-
-/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-// This could be removed, only used now in matrix_init()
-#define LED_ON()    do { palClearPad(GPIOA, 1) ;} while (0)
-#define LED_OFF()   do { palSetPad(GPIOA, 1); } while (0)
-#endif
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-void matrix_init(void)
-{
-  // initialize row and col
-  unselect_rows();
-  init_cols();
-  // initialize matrix state: all keys off
-  for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-    matrix[i] = 0;
-    matrix_debouncing[i] = 0;
-  }
-  //debug
-  debug_matrix = true;
-  LED_ON();
-  wait_ms(500);
-  LED_OFF();
-
-  matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void){
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    select_row(i);
-    wait_us(30);  // without this wait read unstable value.
-    matrix_row_t cols = read_cols();
-    if (matrix_debouncing[i] != cols) {
-      matrix_debouncing[i] = cols;
-      if (debouncing) {
-        debug("bounce!: "); debug_hex(debouncing); debug("\n");
-      }
-    debouncing = DEBOUNCE;
-    }
-    unselect_rows();
-  }
-
-  if (debouncing) {
-    if (--debouncing) {
-      wait_ms(1);
-    } else {
-      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        matrix[i] = matrix_debouncing[i];
-      }
-    }
-  }
-  matrix_scan_quantum();
-  return 1;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col){
-  return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row){
-  return matrix[row];
-}
-
-void matrix_print(void){
-  print("\nr/c 0123456789ABCDEF\n");
-  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-    phex(row); print(": ");
-    pbin_reverse16(matrix_get_row(row));
-    print("\n");
-  }
-}
-
-/* Column pin configuration
- */
-//  Modified by Xydane
-static void  init_cols(void){
-  palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 15, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 12, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 11, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 10, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 1, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOB, 0, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 7, PAL_MODE_INPUT_PULLUP);
-  palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLUP);
-}
-
-/* Returns status of switches(1:on, 0:off) */
-//  Modified by Xydane
-static matrix_row_t read_cols(void){
-  return ((palReadPad(GPIOA, 5)==PAL_HIGH) ? 0 : (1<<0))
-    | ((palReadPad(GPIOA, 15)==PAL_HIGH) ? 0 : (1<<1))
-    | ((palReadPad(GPIOA, 10)==PAL_HIGH) ? 0 : (1<<2))
-    | ((palReadPad(GPIOA, 9)==PAL_HIGH) ? 0 : (1<<3))
-    | ((palReadPad(GPIOA, 8)==PAL_HIGH) ? 0 : (1<<4))
-    | ((palReadPad(GPIOB, 15)==PAL_HIGH) ? 0 : (1<<5))
-    | ((palReadPad(GPIOB, 14)==PAL_HIGH) ? 0 : (1<<6))
-    | ((palReadPad(GPIOB, 13)==PAL_HIGH) ? 0 : (1<<7))
-    | ((palReadPad(GPIOB, 12)==PAL_HIGH) ? 0 : (1<<8))
-    | ((palReadPad(GPIOB, 11)==PAL_HIGH) ? 0 : (1<<9))
-    | ((palReadPad(GPIOB, 10)==PAL_HIGH) ? 0 : (1<<10))
-    | ((palReadPad(GPIOB, 1)==PAL_HIGH) ? 0 : (1<<11))
-    | ((palReadPad(GPIOB, 0)==PAL_HIGH) ? 0 : (1<<12))
-    | ((palReadPad(GPIOA, 7)==PAL_HIGH) ? 0 : (1<<13))
-    | ((palReadPad(GPIOA, 6)==PAL_HIGH) ? 0 : (1<<14));
-}
-
-/* Row pin configuration
- */
-//  Modified by Xydane
-static void unselect_rows(void){
-  palSetPadMode(GPIOB, 9, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 5, PAL_MODE_INPUT);
-  palSetPadMode(GPIOA, 4, PAL_MODE_INPUT);
-}
-
-//  Modified by Xydane
-static void select_row(uint8_t row){
-  (void)row;
-  switch (row) {
-    case 0:
-      palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOB, 9);
-      break;
-    case 1:
-      palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOB, 8);
-      break;
-    case 2:
-      palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOB, 7);
-      break;
-    case 3:
-      palSetPadMode(GPIOB, 6, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOB, 6);
-      break;
-    case 4:
-      palSetPadMode(GPIOB, 5, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOB, 5);
-      break;
-    case 5:
-      palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL);
-      palClearPad(GPIOA, 4);
-      break;
-  }
-}
diff --git a/keyboards/handwired/bluepill/bluepill70/mcuconf.h b/keyboards/handwired/bluepill/bluepill70/mcuconf.h
deleted file mode 100644
index 60d9931c35..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/mcuconf.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   FALSE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC1_IRQ_PRIORITY         6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM8                  FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  TRUE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY              15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-#endif /* _MCUCONF_H_ */
\ No newline at end of file
diff --git a/keyboards/handwired/bluepill/bluepill70/rules.mk b/keyboards/handwired/bluepill/bluepill70/rules.mk
deleted file mode 100644
index 4a757bcc91..0000000000
--- a/keyboards/handwired/bluepill/bluepill70/rules.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-# MCU name
-MCU = STM32F103
-
-# Enter lower-power sleep mode when on the ChibiOS idle thread
-OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# project specific files
-SRC = matrix.c \
-      led.c