Migrate hadron away from QWIIC_DRIVERS (#14415)

15 files changed, 155 insertions, 733 deletions

diff --git a/keyboards/hadron/i2c.c b/keyboards/hadron/i2c.c
deleted file mode 100644
index cd2b835d50..0000000000
--- a/keyboards/hadron/i2c.c
+++ /dev/null
@@ -1,166 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  // send device address
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-
-
-
-#endif
diff --git a/keyboards/hadron/i2c.h b/keyboards/hadron/i2c.h
deleted file mode 100644
index 7ecf6eb278..0000000000
--- a/keyboards/hadron/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  800000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h
index e051db209c..c992f7fe33 100644
--- a/keyboards/hadron/ver2/config.h
+++ b/keyboards/hadron/ver2/config.h
@@ -28,10 +28,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F6, F7, D6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 }
 #define UNUSED_PINS
 
-
-#define USE_I2C
-#define SSD1306OLED
-#define OLED_ROTATE180
+// configure oled driver for the 128x32 oled
+#define OLED_UPDATE_INTERVAL 33 // ~30fps
 
 /* ws2812 RGB LED*/
 #define RGB_DI_PIN D4
diff --git a/keyboards/hadron/ver2/keymaps/default/keymap.c b/keyboards/hadron/ver2/keymaps/default/keymap.c
index 8e3d50d3d7..f24239aa22 100644
--- a/keyboards/hadron/ver2/keymaps/default/keymap.c
+++ b/keyboards/hadron/ver2/keymaps/default/keymap.c
@@ -1,10 +1,4 @@
 #include QMK_KEYBOARD_H
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
 
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -18,8 +12,8 @@ extern rgblight_config_t rgblight_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _MOUSECURSOR 5
+#define _ADJUST 6
 
 enum preonic_keycodes {
   QWERTY = SAFE_RANGE,
@@ -307,115 +301,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
-//Functions for ver2
-#ifdef KEYBOARD_hadron_ver2
-#include <LUFA/Drivers/Peripheral/TWI.h>
 void matrix_init_user(void) {
-  #ifdef USE_I2C
-    i2c_master_init();
-  #ifdef SSD1306OLED
-  // calls code for the SSD1306 OLED
-        _delay_ms(400);
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-        iota_gfx_init();   // turns on the display
-  #endif
-  #endif
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-
-void matrix_scan_user(void) {
-    #ifdef SSD1306OLED
-     iota_gfx_task();  // this is what updates the display continuously
-    #endif
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
+#ifdef AUDIO_ENABLE
+    startup_user();
 #endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case L_RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case L_LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case L_ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
 }
-
-#endif
diff --git a/keyboards/hadron/ver2/keymaps/readme.md b/keyboards/hadron/ver2/keymaps/readme.md
deleted file mode 100644
index 2f7641d185..0000000000
--- a/keyboards/hadron/ver2/keymaps/readme.md
+++ /dev/null
@@ -1,22 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
-    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
-     * **folder_name** description
-
-# List of Planck keymaps
-
-* **default** default Planck layout
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
index c63ae93855..74f95b4b75 100644
--- a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
@@ -1,15 +1,4 @@
 #include QMK_KEYBOARD_H
-#include <LUFA/Drivers/Peripheral/TWI.h>
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
-extern keymap_config_t keymap_config;
 
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -19,12 +8,12 @@ extern rgblight_config_t rgblight_config;
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
 #define _QWERTY 0
-#define _LOWER 3
-#define _RAISE 4
-#define _FNLAYER 6
-#define _NUMLAY 7
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _LOWER 1
+#define _RAISE 2
+#define _FNLAYER 3
+#define _NUMLAY 4
+#define _MOUSECURSOR 5
+#define _ADJUST 6
 
 enum preonic_keycodes {
   QWERTY = SAFE_RANGE,
@@ -41,10 +30,7 @@ enum preonic_keycodes {
   RGBLED_DECREASE_SAT,
   RGBLED_INCREASE_VAL,
   RGBLED_DECREASE_VAL,
-};
-
-enum macro_keycodes {
-  KC_DEMOMACRO,
+  DEMOMACRO,
 };
 
 // Custom macros
@@ -57,7 +43,6 @@ enum macro_keycodes {
 #define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
 #define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
 #define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
-#define DEMOMACRO    M(KC_DEMOMACRO)                // My login macros
 
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -322,29 +307,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
+    case DEMOMACRO:
+      if (record->event.pressed) {
+        SEND_STRING("hello world");
+      }
+      return false;
+      break;
   }
   return true;
 }
 
 void matrix_init_user(void) {
-  #ifdef USE_I2C
-    i2c_master_init();
-  #ifdef SSD1306OLED
-  // calls code for the SSD1306 OLED
-        _delay_ms(400);
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-        iota_gfx_init();   // turns on the display
-  #endif
-  #endif
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-void matrix_scan_user(void) {
-    #ifdef SSD1306OLED
-     iota_gfx_task();  // this is what updates the display continuously
-    #endif
+#ifdef AUDIO_ENABLE
+    startup_user();
+#endif
 }
 
 #ifdef AUDIO_ENABLE
@@ -373,109 +349,3 @@ void music_scale_user(void)
 }
 
 #endif
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    if (!eeconfig_is_enabled()) {
-      eeconfig_init();
-    }
-
-    switch (id) {
-      case KC_DEMOMACRO:
-        if (record->event.pressed){
-          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
-        }
-    }
-
-    return MACRO_NONE;
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case L_RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case L_LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case L_ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk
index f2ec0e7b3f..79e5cccb5e 100644
--- a/keyboards/hadron/ver2/rules.mk
+++ b/keyboards/hadron/ver2/rules.mk
@@ -5,27 +5,19 @@ MCU = atmega32u4
 BOOTLOADER = halfkay
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no        # Enable one-hand typing
-
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-
-EXTRAFLAGS += -flto
-
-
-SRC = i2c.c \
-	  ssd1306.c
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+AUDIO_ENABLE = no           # Audio output
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306
diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c
index f00b4f26d6..ca13427497 100644
--- a/keyboards/hadron/ver2/ver2.c
+++ b/keyboards/hadron/ver2/ver2.c
@@ -1 +1,65 @@
 #include "ver2.h"
+
+#ifdef OLED_ENABLE
+__attribute__ ((weak))
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;
+}
+
+__attribute__ ((weak))
+void oled_task_user(void) {
+    oled_write_P(PSTR("LAYER "), false);
+    oled_write_char(get_highest_layer(layer_state) + 0x30, true);
+
+    led_t led_state = host_keyboard_led_state();
+    oled_set_cursor(18, 0);
+    oled_write_P(PSTR("NUM"), led_state.num_lock);
+    oled_set_cursor(18, 1);
+    oled_write_P(PSTR("CAP"), led_state.caps_lock);
+    oled_set_cursor(18, 2);
+    oled_write_P(PSTR("SCR"), led_state.scroll_lock);
+
+    uint8_t mod_state = get_mods();
+    oled_set_cursor(10, 3);
+    oled_write_P(PSTR("S"), mod_state & MOD_MASK_SHIFT);
+    oled_advance_char();
+    oled_write_P(PSTR("C"), mod_state & MOD_MASK_CTRL);
+    oled_advance_char();
+    oled_write_P(PSTR("A"), mod_state & MOD_MASK_ALT);
+    oled_advance_char();
+    oled_write_P(PSTR("G"), mod_state & MOD_MASK_GUI);
+    oled_advance_char();
+
+/* Matrix display is 12 x 12 pixels */
+#define MATRIX_DISPLAY_X 5
+#define MATRIX_DISPLAY_Y 18
+
+    // matrix
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        for (uint8_t y = 0; y < MATRIX_COLS; y++) {
+            bool on = (matrix_get_row(x) & (1 << y)) > 0;
+            oled_write_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2, on);
+        }
+    }
+
+    // outline
+    for (uint8_t x = 0; x < 19; x++) {
+        oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y, true);
+        oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y + 9, true);
+    }
+    for (uint8_t y = 0; y < 9; y++) {
+        oled_write_pixel(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y+y, true);
+        oled_write_pixel(MATRIX_DISPLAY_X + 19, MATRIX_DISPLAY_Y+y, true);
+    }
+
+    // oled location
+    for (uint8_t x = 0; x < 3; x++) {
+        oled_write_pixel(MATRIX_DISPLAY_X + 14 + x, MATRIX_DISPLAY_Y + 2, true);
+    }
+
+    // bodge for layer number left hand side
+    for (uint8_t y = 0; y < 8; y++) {
+        oled_write_pixel(35, 0 + y, true);
+    }
+}
+#endif
diff --git a/keyboards/hadron/ver2/ver2.h b/keyboards/hadron/ver2/ver2.h
index e7577d2684..8127b497f7 100644
--- a/keyboards/hadron/ver2/ver2.h
+++ b/keyboards/hadron/ver2/ver2.h
@@ -1,3 +1,3 @@
 #pragma once
 
-#include "../hadron.h"
+#include "hadron.h"
diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h
index 87d01726f5..54fab6662d 100644
--- a/keyboards/hadron/ver3/config.h
+++ b/keyboards/hadron/ver3/config.h
@@ -69,16 +69,8 @@
 #define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
 #endif
 
-//configure qwiic micro_oled driver for the 128x32 oled
-#ifdef QWIIC_MICRO_OLED_ENABLE
-
-#undef I2C_ADDRESS_SA0_1
-#define I2C_ADDRESS_SA0_1 0b0111100
-#define LCDWIDTH      128
-#define LCDHEIGHT     32
-#define micro_oled_rotate_180
-
-#endif
+// configure oled driver for the 128x32 oled
+#define OLED_UPDATE_INTERVAL 33 // ~30fps
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 // #define DEBOUNCE 6
diff --git a/keyboards/hadron/ver3/keymaps/default/config.h b/keyboards/hadron/ver3/keymaps/default/config.h
deleted file mode 100644
index 6f70f09bee..0000000000
--- a/keyboards/hadron/ver3/keymaps/default/config.h
+++ /dev/null
@@ -1 +0,0 @@
-#pragma once
diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c
index cec43e95d4..b897ffcab1 100644
--- a/keyboards/hadron/ver3/keymaps/default/keymap.c
+++ b/keyboards/hadron/ver3/keymaps/default/keymap.c
@@ -9,8 +9,8 @@
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _MOUSECURSOR 5
+#define _ADJUST 6
 
 enum preonic_keycodes {
   QWERTY = SAFE_RANGE,
diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md
deleted file mode 100644
index 66bf06b711..0000000000
--- a/keyboards/hadron/ver3/keymaps/readme.md
+++ /dev/null
@@ -1,24 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
-    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
-     * **folder_name** description
-
-# List of Hadron keymaps
-
-* **default** default Hadron layout
-* **ishtob** ishtob's Hadron layout
-* **sebaslayout** sebaslayout's Hadron layout
\ No newline at end of file
diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk
index f3cc14b17d..ad753a5ff1 100644
--- a/keyboards/hadron/ver3/rules.mk
+++ b/keyboards/hadron/ver3/rules.mk
@@ -22,6 +22,6 @@ RGBLIGHT_ENABLE = yes
 RGB_MATRIX_ENABLE = no # once arm_rgb is implemented
 RGB_MATRIX_DRIVER = WS2812
 HAPTIC_ENABLE += DRV2605L
-QWIIC_ENABLE = yes
-QWIIC_DRIVERS += MICRO_OLED
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306
 ENCODER_ENABLER = yes
diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c
index 0664bf4b0e..7eabe58558 100644
--- a/keyboards/hadron/ver3/ver3.c
+++ b/keyboards/hadron/ver3/ver3.c
@@ -14,9 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "ver3.h"
-#include "qwiic.h"
-#include "action_layer.h"
-#include "haptic.h"
 
 
 #ifdef RGB_MATRIX_ENABLE
@@ -36,185 +33,66 @@ led_config_t g_led_config = { {
 
 #endif
 
-uint8_t *o_fb;
-
-uint16_t counterst = 0;
-
-
-
-#ifdef QWIIC_MICRO_OLED_ENABLE
-
-/* screen off after this many milliseconds */
-#include "timer.h"
-#define ScreenOffInterval 60000 /* milliseconds */
-static uint16_t last_flush;
-
-volatile uint8_t led_numlock = false;
-volatile uint8_t  led_capslock = false;
-volatile uint8_t  led_scrolllock = false;
-
-static uint8_t layer;
-static bool queue_for_send = false;
-static uint8_t encoder_value = 32;
-
+#ifdef OLED_ENABLE
 __attribute__ ((weak))
-void draw_ui(void) {
-  clear_buffer();
-  last_flush = timer_read();
-  send_command(DISPLAYON);
-
-/* Layer indicator is 41 x 10 pixels */
-#define LAYER_INDICATOR_X 5
-#define LAYER_INDICATOR_Y 0
-
-  draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
-  draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM);
-  draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0);
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;
+}
 
-/* Matrix display is 19 x 9 pixels */
+__attribute__ ((weak))
+void oled_task_user(void) {
+    oled_write_P(PSTR("LAYER "), false);
+    oled_write_char(get_highest_layer(layer_state) + 0x30, true);
+
+    led_t led_state = host_keyboard_led_state();
+    oled_set_cursor(18, 0);
+    oled_write_P(PSTR("NUM"), led_state.num_lock);
+    oled_set_cursor(18, 1);
+    oled_write_P(PSTR("CAP"), led_state.caps_lock);
+    oled_set_cursor(18, 2);
+    oled_write_P(PSTR("SCR"), led_state.scroll_lock);
+
+    uint8_t mod_state = get_mods();
+    oled_set_cursor(10, 3);
+    oled_write_P(PSTR("S"), mod_state & MOD_MASK_SHIFT);
+    oled_advance_char();
+    oled_write_P(PSTR("C"), mod_state & MOD_MASK_CTRL);
+    oled_advance_char();
+    oled_write_P(PSTR("A"), mod_state & MOD_MASK_ALT);
+    oled_advance_char();
+    oled_write_P(PSTR("G"), mod_state & MOD_MASK_GUI);
+    oled_advance_char();
+
+/* Matrix display is 12 x 12 pixels */
 #define MATRIX_DISPLAY_X 5
 #define MATRIX_DISPLAY_Y 18
 
-  for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-    for (uint8_t y = 0; y < MATRIX_COLS; y++) {
-      draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM);
+    // matrix
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        for (uint8_t y = 0; y < MATRIX_COLS; y++) {
+            bool on = (matrix_get_row(x) & (1 << y)) > 0;
+            oled_write_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2, on);
+        }
     }
-  }
-  draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM);
-  /* hadron oled location on thumbnail */
-  draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM);
-/*
-  draw_rect_soft(0, 13, 64, 6, PIXEL_ON, NORM);
-  draw_line_vert(encoder_value, 13, 6, PIXEL_ON, NORM);
-
-*/
-
-/* Mod display is 41 x 16 pixels */
-#define MOD_DISPLAY_X 30
-#define MOD_DISPLAY_Y 18
-
-  uint8_t mods = get_mods();
-  if (mods & MOD_LSFT) {
-    draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
-    draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0);
-  } else {
-    draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0);
-  }
-  if (mods & MOD_LCTL) {
-    draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
-    draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0);
-  } else {
-    draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0);
-  }
-  if (mods & MOD_LALT) {
-    draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
-    draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0);
-  } else {
-    draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0);
-  }
-  if (mods & MOD_LGUI) {
-    draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
-    draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0);
-  } else {
-    draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0);
-  }
-
-/* Lock display is 23 x 32 */
-#define LOCK_DISPLAY_X 100
-#define LOCK_DISPLAY_Y 0
-
-  if (led_numlock == true) {
-    draw_rect_filled_soft(LOCK_DISPLAY_X, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM);
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_OFF, NORM, 0);
-  } else if (led_numlock == false) {
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_ON, NORM, 0);
-  }
-  if (led_capslock == true) {
-    draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM);
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_OFF, NORM, 0);
-  } else if (led_capslock == false) {
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_ON, NORM, 0);
-  }
 
-  if (led_scrolllock == true) {
-    draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 22, 5 + (3 * 6), 9, PIXEL_ON, NORM);
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_OFF, NORM, 0);
-  } else if (led_scrolllock == false) {
-    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_ON, NORM, 0);
-  }
-  send_buffer();
-}
-
-void read_host_led_state(void) {
-  uint8_t leds = host_keyboard_leds();
-  if (leds & (1 << USB_LED_NUM_LOCK))    {
-    if (led_numlock == false){
-    led_numlock = true;}
-    } else {
-    if (led_numlock == true){
-    led_numlock = false;}
-    }
-  if (leds & (1 << USB_LED_CAPS_LOCK))   {
-    if (led_capslock == false){
-    led_capslock = true;}
-    } else {
-    if (led_capslock == true){
-    led_capslock = false;}
+    // outline
+    for (uint8_t x = 0; x < 19; x++) {
+        oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y, true);
+        oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y + 9, true);
     }
-  if (leds & (1 << USB_LED_SCROLL_LOCK)) {
-    if (led_scrolllock == false){
-    led_scrolllock = true;}
-    } else {
-    if (led_scrolllock == true){
-    led_scrolllock = false;}
+    for (uint8_t y = 0; y < 9; y++) {
+        oled_write_pixel(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y+y, true);
+        oled_write_pixel(MATRIX_DISPLAY_X + 19, MATRIX_DISPLAY_Y+y, true);
     }
-}
-
-uint32_t layer_state_set_kb(uint32_t state) {
-  state = layer_state_set_user(state);
-  layer = biton32(state);
-  queue_for_send = true;
-  return state;
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  queue_for_send = true;
-  return process_record_user(keycode, record);
-}
-
-bool encoder_update_user(uint8_t index, bool clockwise);
 
-bool encoder_update_kb(uint8_t index, bool clockwise) {
-    if (!encoder_update_user(index, clockwise)) return false;
-  encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64;
-  queue_for_send = true;
-  return true;
-}
-
-#endif
+    // oled location
+    for (uint8_t x = 0; x < 3; x++) {
+        oled_write_pixel(MATRIX_DISPLAY_X + 14 + x, MATRIX_DISPLAY_Y + 2, true);
+    }
 
-void matrix_init_kb(void) {
-  queue_for_send = true;
-	matrix_init_user();
+    // bodge for layer number left hand side
+    for (uint8_t y = 0; y < 8; y++) {
+        oled_write_pixel(35, 0 + y, true);
+    }
 }
-
-void matrix_scan_kb(void) {
-if (queue_for_send) {
-#ifdef QWIIC_MICRO_OLED_ENABLE
-   read_host_led_state();
-   draw_ui();
 #endif
-   queue_for_send = false;
-  }
-#ifdef QWIIC_MICRO_OLED_ENABLE
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-  send_command(DISPLAYOFF);      /* 0xAE */
-  }
-#endif
-  if (counterst == 0) {
-    //testPatternFB(o_fb);
-  }
-  counterst = (counterst + 1) % 1024;
-  //rgblight_task();
-	matrix_scan_user();
-}