2021 February 27 Breaking Changes Update (#12040)

14 files changed, 1 insertions, 77 deletions

diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
deleted file mode 100644
index 9334aaf28f..0000000000
--- a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
+++ /dev/null
@@ -1,64 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk
index f4ab408eb3..969a296835 100644
--- a/keyboards/evyd13/eon40/rules.mk
+++ b/keyboards/evyd13/eon40/rules.mk
@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes
 
 LAYOUTS = ortho_4x12 planck_mit
diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk
index e34ef7475a..9c35f1e1ae 100644
--- a/keyboards/evyd13/eon65/rules.mk
+++ b/keyboards/evyd13/eon65/rules.mk
@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker
diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk
index 264e0ea67d..b78fcc9f5a 100644
--- a/keyboards/evyd13/eon75/rules.mk
+++ b/keyboards/evyd13/eon75/rules.mk
@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk
index 65cfca7d4b..101ebacc81 100644
--- a/keyboards/evyd13/eon87/rules.mk
+++ b/keyboards/evyd13/eon87/rules.mk
@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk
index 264e0ea67d..b78fcc9f5a 100644
--- a/keyboards/evyd13/eon95/rules.mk
+++ b/keyboards/evyd13/eon95/rules.mk
@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/evyd13/minitomic/rules.mk b/keyboards/evyd13/minitomic/rules.mk
index aac492de06..ace9289712 100644
--- a/keyboards/evyd13/minitomic/rules.mk
+++ b/keyboards/evyd13/minitomic/rules.mk
@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk
index 400781b07f..4945986f5a 100644
--- a/keyboards/evyd13/mx5160/rules.mk
+++ b/keyboards/evyd13/mx5160/rules.mk
@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk
index 9fad888855..fb5654deac 100644
--- a/keyboards/evyd13/nt660/rules.mk
+++ b/keyboards/evyd13/nt660/rules.mk
@@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 LAYOUTS = 66_ansi 66_iso
 
diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk
index 8fc9b9c73d..10033a9bfd 100644
--- a/keyboards/evyd13/omrontkl/rules.mk
+++ b/keyboards/evyd13/omrontkl/rules.mk
@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/evyd13/plain60/keymaps/audio/config.h b/keyboards/evyd13/plain60/keymaps/audio/config.h
index 9a43b7fbe3..50309173b4 100644
--- a/keyboards/evyd13/plain60/keymaps/audio/config.h
+++ b/keyboards/evyd13/plain60/keymaps/audio/config.h
@@ -1,3 +1,3 @@
 #pragma once
 
-#define B7_AUDIO
+#define AUDIO_PIN B7
diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk
index 9984f27679..b45c0bc030 100644
--- a/keyboards/evyd13/ta65/rules.mk
+++ b/keyboards/evyd13/ta65/rules.mk
@@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes
 
 LAYOUTS = 65_ansi 65_iso
diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk
index 575e63f5bc..0a9f00403c 100644
--- a/keyboards/evyd13/wasdat/rules.mk
+++ b/keyboards/evyd13/wasdat/rules.mk
@@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 CUSTOM_MATRIX = lite
 SRC += matrix.c
diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk
index 1ff76bab21..48430ee3cd 100644
--- a/keyboards/evyd13/wasdat_code/rules.mk
+++ b/keyboards/evyd13/wasdat_code/rules.mk
@@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 CUSTOM_MATRIX = lite
 SRC += matrix.c