remove all keyboards but ergodox and planck

8 files changed, 0 insertions, 414 deletions

diff --git a/keyboards/daisy/config.h b/keyboards/daisy/config.h
deleted file mode 100644
index f397d28da6..0000000000
--- a/keyboards/daisy/config.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x1209
-#define PRODUCT_ID      0x2328
-#define DEVICE_VER      0x501
-#define MANUFACTURER    K.T.E.C.
-#define PRODUCT         Daisy
-#define DESCRIPTION     qmk port for Daisy
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 11
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D2, D3, D5, B7 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
- 
-#define BACKLIGHT_PIN D0
-#define BACKLIGHT_LEVELS 6
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-// ws2812 options
-#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
-#define RGBLIGHT_ANIMATIONS // run RGB animations
-#define RGBLED_NUM 8 // number of LEDs
-#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#endif
diff --git a/keyboards/daisy/daisy.c b/keyboards/daisy/daisy.c
deleted file mode 100644
index f8ca24ff0b..0000000000
--- a/keyboards/daisy/daisy.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "daisy.h"
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output low
-        DDRC  |=  (1<<PC6);
-        PORTC &= ~(1<<PC6);
-    } else {
-        // Hi-Z
-        DDRC  &= ~(1<<PC6);
-        PORTC &= ~(1<<PC6);
-  }
-	led_set_user(usb_led);
-}
\ No newline at end of file
diff --git a/keyboards/daisy/daisy.h b/keyboards/daisy/daisy.h
deleted file mode 100644
index 15483e3a3a..0000000000
--- a/keyboards/daisy/daisy.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef DAISY_H
-#define DAISY_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
-  K30, K31, K32, K34, K35, K37, K38, K39 \
-) \
-{ \
-  { K00, K01, K02, K03,   K04, K05, K06,   K07, K08, K09, K0A }, \
-  { K10, K11, K12, K13,   K14, K15, K16,   K17, K18, K19, K1A }, \
-  { K20, K21, K22, K23,   K24, K25, K26,   K27, K28, K29, K2A }, \
-  { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A }  \
-}
-
-#endif
diff --git a/keyboards/daisy/info.json b/keyboards/daisy/info.json
deleted file mode 100644
index 4005757932..0000000000
--- a/keyboards/daisy/info.json
+++ /dev/null
@@ -1,18 +0,0 @@
-{
-  "keyboard_name": "Daisy",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 12,
-  "height": 4,
-  "layouts": {
-    "LAYOUT": {
-      "key_count": 42,
-      "layout": [{"label": "K00", "x": 0, "y": 0}, {"label": "K01", "x": 1, "y": 0}, {"label": "K02", "x": 2, "y": 0}, {"label": "K03", "x": 3, "y": 0}, {"label": "K04", "x": 4, "y": 0}, {"label": "K05", "x": 5, "y": 0}, {"label": "K06", "x": 6, "y": 0}, {"label": "K07", "x": 7, "y": 0}, {"label": "K08", "x": 8, "y": 0}, {"label": "K09", "x": 9, "y": 0}, {"label": "K0A", "x": 10, "y": 0}, {"label": "K3A", "x": 11, "y": 0}, {"label": "K10", "x": 0, "y": 1, "w": 1.25}, {"label": "K11", "x": 1.25, "y": 1}, {"label": "K12", "x": 2.25, "y": 1}, {"label": "K13", "x": 3.25, "y": 1}, {"label": "K14", "x": 4.25, "y": 1}, {"label": "K15", "x": 5.25, "y": 1}, {"label": "K16", "x": 6.25, "y": 1}, {"label": "K17", "x": 7.25, "y": 1}, {"label": "K18", "x": 8.25, "y": 1}, {"label": "K19", "x": 9.25, "y": 1}, {"label": "K1A", "x": 10.25, "y": 1, "w": 1.75}, {"label": "K20", "x": 0, "y": 2, "w": 1.75}, {"label": "K21", "x": 1.75, "y": 2}, {"label": "K22", "x": 2.75, "y": 2}, {"label": "K23", "x": 3.75, "y": 2}, {"label": "K24", "x": 4.75, "y": 2}, {"label": "K25", "x": 5.75, "y": 2}, {"label": "K26", "x": 6.75, "y": 2}, {"label": "K27", "x": 7.75, "y": 2}, {"label": "K28", "x": 8.75, "y": 2}, {"label": "K29", "x": 9.75, "y": 2}, {"label": "K2A", "x": 10.75, "y": 2, "w": 1.25}, {"label": "K30", "x": 0, "y": 3, "w": 1.25}, {"label": "K31", "x": 1.25, "y": 3}, {"label": "K32", "x": 2.25, "y": 3, "w": 1.25}, {"label": "K34", "x": 3.5, "y": 3, "w": 2.25}, {"label": "K35", "x": 5.75, "y": 3, "w": 2.75}, {"label": "K37", "x": 8.5, "y": 3, "w": 1.25}, {"label": "K38", "x": 9.75, "y": 3}, {"label": "K39", "x": 10.75, "y": 3, "w": 1.25}]
-    },
-
-    "LAYOUT_625_space": {
-      "key_count": 40,
-      "layout": [{"label": "K00", "x": 0, "y": 0}, {"label": "K01", "x": 1, "y": 0}, {"label": "K02", "x": 2, "y": 0}, {"label": "K03", "x": 3, "y": 0}, {"label": "K04", "x": 4, "y": 0}, {"label": "K05", "x": 5, "y": 0}, {"label": "K06", "x": 6, "y": 0}, {"label": "K07", "x": 7, "y": 0}, {"label": "K08", "x": 8, "y": 0}, {"label": "K09", "x": 9, "y": 0}, {"label": "K0A", "x": 10, "y": 0}, {"label": "K3A", "x": 11, "y": 0}, {"label": "K10", "x": 0, "y": 1, "w": 1.25}, {"label": "K11", "x": 1.25, "y": 1}, {"label": "K12", "x": 2.25, "y": 1}, {"label": "K13", "x": 3.25, "y": 1}, {"label": "K14", "x": 4.25, "y": 1}, {"label": "K15", "x": 5.25, "y": 1}, {"label": "K16", "x": 6.25, "y": 1}, {"label": "K17", "x": 7.25, "y": 1}, {"label": "K18", "x": 8.25, "y": 1}, {"label": "K19", "x": 9.25, "y": 1}, {"label": "K1A", "x": 10.25, "y": 1, "w": 1.75}, {"label": "K20", "x": 0, "y": 2, "w": 1.75}, {"label": "K21", "x": 1.75, "y": 2}, {"label": "K22", "x": 2.75, "y": 2}, {"label": "K23", "x": 3.75, "y": 2}, {"label": "K24", "x": 4.75, "y": 2}, {"label": "K25", "x": 5.75, "y": 2}, {"label": "K26", "x": 6.75, "y": 2}, {"label": "K27", "x": 7.75, "y": 2}, {"label": "K28", "x": 8.75, "y": 2}, {"label": "K29", "x": 9.75, "y": 2}, {"label": "K2A", "x": 10.75, "y": 2, "w": 1.25}, {"label": "K30", "x": 0, "y": 3, "w": 1.25}, {"label": "K31", "x": 1.25, "y": 3}, {"label": "K32", "x": 2.25, "y": 3}, {"x": 3.25, "y": 3, "w": 6.25}, {"label": "K38", "x": 9.5, "y": 3, "w": 1.25}, {"label": "K39", "x": 10.75, "y": 3, "w": 1.25}]
-    }
-  }
-}
diff --git a/keyboards/daisy/keymaps/default/keymap.c b/keyboards/daisy/keymaps/default/keymap.c
deleted file mode 100644
index 9a520ba55d..0000000000
--- a/keyboards/daisy/keymaps/default/keymap.c
+++ /dev/null
@@ -1,93 +0,0 @@
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-// Layer shorthand
-#define _BL 0
-#define _LW 1
-#define _RS 2
-
-enum layer_keycodes {
-    QWERTY = SAFE_RANGE, LOWER, RAISE
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Base Layer
-   * .-----------------------------------------------------------------------.
-   * | ESC | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | \|  |
-   * |-----------------------------------------------------------------------|
-   * | TAB   | A   | S   | D   | F   | G   | H   | J   | K   | L   | ENTER   |
-   * |-----------------------------------------------------------------------|
-   * | LSHIFT | Z   | X    | C   | V   | B   | N   | M   | ,<  | .>  | /?    |
-   * |-----------------------------------------------------------------------|
-   * | LCTRL | LGUI | LALT | SPACE   | BACKSPACE      | LW     | RS  | RALT  |
-   * '-----------------------------------------------------------------------'
-   */
-  [_BL] = LAYOUT(
-    GRAVE_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,     KC_U,   KC_I,    KC_O,    KC_P,    KC_BSLS,
-    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,     KC_J,   KC_K,    KC_L,    KC_ENT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,     KC_M,   KC_COMM, KC_DOT,  KC_SLSH,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_BSPC, LOWER, RAISE, KC_RALT
-  ),
-
-  /* Function Layer
-   * .-----------------------------------------------------------------------.
-   * | GRV | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -_  |
-   * |-----------------------------------------------------------------------|
-   * |       | =+  | UP  |     |     |     | [{  | ]}  | ;:  | '"  |         |
-   * |-----------------------------------------------------------------------|
-   * |        | LEFT| DOWN |RIGHT|     |     |     |     |     |     |       |
-   * |-----------------------------------------------------------------------|
-   * |       |      |      |         | DELETE         |        |     |       |
-   * '-----------------------------------------------------------------------'
-   */
-
-  [_LW] = LAYOUT(
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
-    KC_TRNS, KC_EQL,  KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS,
-    KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-  /* Second Function Layer
-   * .-----------------------------------------------------------------------.
-   * | RST | F1  | F2  | F3  | F4  | F5  | F6  |     | HOME| PGUP|     |     |
-   * |-----------------------------------------------------------------------|
-   * |      | F7  | F8  | F9  | F10 | F11 | F12 |     | END | PGDN|          |
-   * |-----------------------------------------------------------------------|
-   * |       |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL|    |
-   * |-----------------------------------------------------------------------|
-   * |       |      |      |         |                |        |     |       |
-   * '-----------------------------------------------------------------------'
-   */
-  [_RS] = LAYOUT(
-    RESET,   KC_F1,   KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_TRNS, KC_HOME, KC_PGUP,  KC_TRNS,  KC_TRNS,
-    KC_TRNS, KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_END,  KC_PGDN,  KC_TRNS,
-    KC_TRNS, RGB_TOG, RGB_MOD,  RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP,  KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case LOWER:
-      if(record->event.pressed){
-        layer_on(_LW);
-      } else {
-        layer_off(_LW);
-      }
-      return false;
-      break;
-    case RAISE:
-      if(record->event.pressed){
-        layer_on(_RS);
-      } else {
-        layer_off(_RS);
-      }
-      return false;
-      break;
-  }
-  return true;
-};
diff --git a/keyboards/daisy/keymaps/default/readme.md b/keyboards/daisy/keymaps/default/readme.md
deleted file mode 100644
index dff0dcbdee..0000000000
--- a/keyboards/daisy/keymaps/default/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-![Daisy Layout Image](https://imgur.com/9mSF0yf)
-
-# Default Daisy Layout
-
-This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me.
diff --git a/keyboards/daisy/readme.md b/keyboards/daisy/readme.md
deleted file mode 100644
index c8175c2830..0000000000
--- a/keyboards/daisy/readme.md
+++ /dev/null
@@ -1,29 +0,0 @@
-# Daisy
-
-A 40% keyboard kit sold by KPRepublic.
-
-Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot)  
-Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2  
-Hardware Availability: http://tinyurl.com/yc26lq22
-
-Make example for this keyboard (after setting up your build environment):
-
-    make daisy:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
-# Other Keymaps
-
-The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable.
-
-A printable picture showing this layout is available here: https://imgur.com/9mSF0yf
-
-
-```
-$ make daisy:[default|<name>]
-```
-
-# Bootloader
-
-I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex
diff --git a/keyboards/daisy/rules.mk b/keyboards/daisy/rules.mk
deleted file mode 100644
index 8157b168e5..0000000000
--- a/keyboards/daisy/rules.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4996
-
-# QMK Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
\ No newline at end of file