remove all keyboards but ergodox and planck

7 files changed, 0 insertions, 350 deletions

diff --git a/keyboards/clueboard/17/17.c b/keyboards/clueboard/17/17.c
deleted file mode 100644
index 627aa236dd..0000000000
--- a/keyboards/clueboard/17/17.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include "17.h"
-
-int pwm_level;
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-};
-
-void led_set_kb(uint8_t usb_led) {
-    print("led_set\n");
-}
-
-void backlight_init_ports(void) {
-    // Set C7 to output
-    DDRC |= (1<<7);
-
-    // Initialize the timer
-    TC4H = 0x03;
-    OCR4C = 0xFF;
-    TCCR4A = 0b10000010;
-    TCCR4B = 0b00000001;
-}
-
-void backlight_set(uint8_t level) {
-    // Determine the PWM level
-    switch (level)
-    {
-        case 0:
-            // 33%
-            pwm_level = 0x54;
-            break;
-        case 1:
-            // 66%
-            pwm_level = 0xA8;
-            break;
-        case 2:
-            // 100%
-            pwm_level = 0xFF;
-            break;
-        case 3:
-            // 0%
-            pwm_level = 0x00;
-            break;
-        default:
-            xprintf("Unknown level: %d\n", level);
-    }
-
-    // Write the PWM level to the timer
-    TC4H = pwm_level >> 8;
-    OCR4A = 0xFF & pwm_level;
-}
diff --git a/keyboards/clueboard/17/17.h b/keyboards/clueboard/17/17.h
deleted file mode 100644
index af3be4f5a9..0000000000
--- a/keyboards/clueboard/17/17.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef CLUEPAD_H
-#define CLUEPAD_H
-
-#include "quantum.h"
-
-
-/* Cluepad matrix layout
- * .-------------------.
- * |NLCK|   /|   *|   -|
- * |-------------------|
- * |   7|   8|   9|    |
- * |--------------|    |
- * |   4|   5|   6|   +|
- * |-------------------|
- * |   1|   2|   3|    |
- * |--------------|    |
- * |        0|   .| Ent|
- * '-------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT_numpad_5x4( \
-    k00, k01, k02, k03, \
-    k10, k11, k12,      \
-    k20, k21, k22, k13, \
-    k30, k31, k32,      \
-    k40,      k42, k33  \
-) { \
-    { k00, k01,   k02, k03   }, \
-    { k10, k11,   k12, k13   }, \
-    { k20, k21,   k22, KC_NO }, \
-    { k30, k31,   k32, k33   }, \
-    { k40, KC_NO, k42, KC_NO }  \
-}
-
-#define LAYOUT LAYOUT_numpad_5x4
-#define KEYMAP LAYOUT_numpad_5x4
-
-#endif
diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h
deleted file mode 100644
index 21728348db..0000000000
--- a/keyboards/clueboard/17/config.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xC1ED
-#define PRODUCT_ID      0x2312
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Clueboard
-#define PRODUCT         Cluepad with RGB Underlighting
-#define DESCRIPTION     QMK keyboard firmware for Cluepad
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-// ROWS: Top to bottom, COLS: Left to right
-/* Row pin configuration
-* row: 0  1  2  3  4
-* pin:
-*/
-#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 }
-/* Column pin configuration
- * col: 0  1  2  3
- * pin: F4 E6 B1 D2
- */
-#define MATRIX_COL_PINS { F4, E6, B1, D2 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Number of backlighting levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Underlight configuration
- */
-#define RGB_DI_PIN F6
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 4     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* Debug forcibly enabled */
-#define ALWAYS_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/clueboard/17/info.json b/keyboards/clueboard/17/info.json
deleted file mode 100644
index 12338ae1d3..0000000000
--- a/keyboards/clueboard/17/info.json
+++ /dev/null
@@ -1,31 +0,0 @@
-{
-  "keyboard_name": "Clueboard 17% (Cluepad)",
-  "keyboard_folder": "clueboard/17",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 4,
-  "height": 5,
-  "layouts": {
-    "LAYOUT_numpad_5x4": {
-      "layout": [
-        {"label":"Num Lock", "x":0, "y":0},
-        {"label":"/", "x":1, "y":0},
-        {"label":"*", "x":2, "y":0},
-        {"label":"-", "x":3, "y":0},
-        {"label":"7", "x":0, "y":1},
-        {"label":"8", "x":1, "y":1},
-        {"label":"9", "x":2, "y":1},
-        {"label":"4", "x":0, "y":2},
-        {"label":"5", "x":1, "y":2},
-        {"label":"6", "x":2, "y":2},
-        {"label":"+", "x":3, "y":1, "h":2},
-        {"label":"1", "x":0, "y":3},
-        {"label":"2", "x":1, "y":3},
-        {"label":"3", "x":2, "y":3},
-        {"label":"0", "x":0, "y":4, "w":2},
-        {"label":".", "x":2, "y":4},
-        {"label":"Enter", "x":3, "y":3, "h":2}
-      ]
-    }
-  }
-}
diff --git a/keyboards/clueboard/17/keymaps/default/keymap.c b/keyboards/clueboard/17/keymaps/default/keymap.c
deleted file mode 100644
index 65c64e43c4..0000000000
--- a/keyboards/clueboard/17/keymaps/default/keymap.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * .-------------------.
-   * |NL F|   /|   *|   -|
-   * |-------------------|
-   * |   7|   8|   9|    |
-   * |--------------|    |
-   * |   4|   5|   6|   +|
-   * |-------------------|
-   * |   1|   2|   3|    |
-   * |--------------|    |
-   * |        0|   .| Ent|
-   * '-------------------'
-   */
-  [_BL] = LAYOUT_numpad_5x4(
-    LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
-    KC_P7,            KC_P8,   KC_P9,            \
-    KC_P4,            KC_P5,   KC_P6,   KC_PPLS, \
-    KC_P1,            KC_P2,   KC_P3,            \
-    KC_P0,                     KC_PDOT, KC_PENT  \
-  ),
-
-  /* Keymap _FL: Function Layer
-   * .-------------------.
-   * |NL F|    |    | Fn0|
-   * |-------------------|
-   * |    | Fn4|    |    |
-   * |--------------|    |
-   * | Fn3|BL_S| Fn2| Fn6|
-   * |-------------------|
-   * |    | Fn5|    |    |
-   * |--------------|    |
-   * |      Fn1|    | Fn7|
-   * '-------------------'
-   */
-  [_FL] = LAYOUT_numpad_5x4(
-    LT(_FL, KC_NLCK), _______, _______, RGB_TOG, \
-    _______,          RGB_SAI, _______,          \
-    RGB_HUD,          BL_STEP, RGB_HUI, RGB_VAI, \
-    _______,          RGB_SAD, _______,          \
-    RGB_MOD,                   _______, RGB_VAD  \
-  )
-};
diff --git a/keyboards/clueboard/17/readme.md b/keyboards/clueboard/17/readme.md
deleted file mode 100644
index c183657f96..0000000000
--- a/keyboards/clueboard/17/readme.md
+++ /dev/null
@@ -1,16 +0,0 @@
-# Clueboard 17% (Formerly Cluepad)
-
-![Clueboard 17%](https://i.imgur.com/3XBC5c0.jpg)
-
-A basic 17 key numpad PCB.
-
-* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
-* Hardware Supported:
-  * Cluepad PCB 1.0
-* Hardware Availability: [clueboard.co](https://clueboard.co/)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make clueboard/17:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk
deleted file mode 100644
index 591d40f030..0000000000
--- a/keyboards/clueboard/17/rules.mk
+++ /dev/null
@@ -1,60 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-BOOTMAGIC_ENABLE = no	      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode