diff options
| author | Drashna Jaelre <drashna@live.com> | 2019-04-09 08:58:11 -0700 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-04-09 08:58:11 -0700 |
| commit | b6850bc043b1d129042f47501f0a1dc1e196f962 (patch) | |
| tree | a0a772f278c3c494db3bc69103955af5561e1cae /keyboards/cannonkeys/satisfaction75 | |
| parent | 19ed62114a1f5d20aacb9cbe83105e977b9a2971 (diff) | |
remove all keyboards but ergodox and planck
Diffstat (limited to 'keyboards/cannonkeys/satisfaction75')
27 files changed, 0 insertions, 4652 deletions
diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index d9f7bc329e..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; - SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); -} diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index de3a93d1ce..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,922 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 32768 -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index 9c7cf4fd76..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>3.0.x</hal_version> - </configuration_settings> - <board_name>ST STM32F072B-Discovery</board_name> - <board_id>ST_STM32F072B_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F072xB</subtype> - <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" - LSEBypass="false" LSEDrive="3 High Drive (default)" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="USB_DM" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="USB_DP" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SPI2_SCK" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SPI2_MISO" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="SPI2_MOSI" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="MEMS_CS" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LED_RED" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin7 - ID="LED_BLUE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin8 - ID="LED_ORANGE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" ></pin8> - <pin9 - ID="LED_GREEN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOF> - </ports> -</board> diff --git a/keyboards/cannonkeys/satisfaction75/bootloader_defs.h b/keyboards/cannonkeys/satisfaction75/bootloader_defs.h deleted file mode 100644 index 02c48c4e6d..0000000000 --- a/keyboards/cannonkeys/satisfaction75/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/satisfaction75/chconf.h b/keyboards/cannonkeys/satisfaction75/chconf.h deleted file mode 100644 index 99fa8ce398..0000000000 --- a/keyboards/cannonkeys/satisfaction75/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h deleted file mode 100644 index e3d44990ef..0000000000 --- a/keyboards/cannonkeys/satisfaction75/config.h +++ /dev/null @@ -1,120 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x57F5 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER CannonKeys -#define PRODUCT Satisfaction75 -#define DESCRIPTION Satisfaction 75 Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 - -#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 } -#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 } -#define DIODE_DIRECTION COL2ROW - -#define NUMBER_OF_ENCODERS 1 -#define ENCODERS_PAD_A { B9 } -#define ENCODERS_PAD_B { B8 } - -//LEDS A6, RGB B15 -#define BACKLIGHT_LEVELS 24 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#ifdef QWIIC_MICRO_OLED_ENABLE - -#undef I2C_ADDRESS_SA0_1 -#define I2C_ADDRESS_SA0_1 0b0111100 -#define LCDWIDTH 128 -#define LCDHEIGHT 32 - -#endif - - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x0F -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 - -// Dynamic macro starts after dynamic keymaps (35+(4*6*16*2)) = (35+768) = 803 - -// I'm also putting my custom stuff after that -// 1 for enabled encoder modes -// 1 for custom backlighting controls -// 1 for OLED default mode -// 6 for 3x custom encoder settings, left, right, and press (18 total) - -#define DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES 803 -#define DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT 804 -#define DYNAMIC_KEYMAP_DEFAULT_OLED 805 -#define DYNAMIC_KEYMAP_CUSTOM_ENCODER 806 - -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 824 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/satisfaction75/halconf.h b/keyboards/cannonkeys/satisfaction75/halconf.h deleted file mode 100644 index 9a9ab838e6..0000000000 --- a/keyboards/cannonkeys/satisfaction75/halconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c deleted file mode 100644 index d81eb92d49..0000000000 --- a/keyboards/cannonkeys/satisfaction75/i2c_master.c +++ /dev/null @@ -1,116 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* This library is only valid for STM32 processors. - * This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used - * but using any other I2C pins should be trivial. - */ - -#include "i2c_master.h" -#include "quantum.h" -#include <string.h> -#include <hal.h> -#include "chtypes.h" -#include "ch.h" - -static uint8_t i2c_address; - -// This configures the I2C clock to 400khz assuming a 48Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(0x00U) | - STM32_TIMINGR_SCLDEL(0x03U) | STM32_TIMINGR_SDADEL(0x01U) | - STM32_TIMINGR_SCLH(0x03U) | STM32_TIMINGR_SCLL(0x09U), - 0, - 0 -}; - -__attribute__ ((weak)) -void i2c_init(void) -{ - // Try releasing special pins for a short time - palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); - palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); - - palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); - - //i2cInit(); //This is invoked by halInit() so no need to redo it. -} - -// This is usually not needed -uint8_t i2c_start(uint8_t address) -{ - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - return 0; -} - -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) -{ - msg_t status = MSG_OK; - - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - i2cAcquireBus(&I2C_DRIVER); - status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); - i2cReleaseBus(&I2C_DRIVER); - return status; -} - -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); -} - -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - - uint8_t complete_packet[length + 1]; - for(uint8_t i = 0; i < length; i++) - { - complete_packet[i+1] = data[i]; - } - complete_packet[0] = regaddr; - - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); -} - -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); -} - -// This is usually not needed. It releases the driver to allow pins to become GPIO again. -uint8_t i2c_stop(void) -{ - i2cStop(&I2C_DRIVER); - return 0; -} diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c deleted file mode 100644 index 5e87c73dcc..0000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_default( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c deleted file mode 100644 index 3595c107b9..0000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGUP, - KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk b/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk deleted file mode 100644 index 3357eb91c0..0000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk +++ /dev/null @@ -1 +0,0 @@ -QWIIC_ENABLE = no diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c deleted file mode 100644 index e76c79a71b..0000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_default( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -void matrix_init_user(void) { - //user initialization -} - -void matrix_scan_user(void) { - //user matrix -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk b/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk deleted file mode 100644 index d12497792d..0000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# rules.mk overrides to enable VIA - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes - diff --git a/keyboards/cannonkeys/satisfaction75/led.c b/keyboards/cannonkeys/satisfaction75/led.c deleted file mode 100644 index 3ddcec2028..0000000000 --- a/keyboards/cannonkeys/satisfaction75/led.c +++ /dev/null @@ -1,240 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "hal.h" -#include "led_custom.h" -#include "satisfaction75.h" -#include "printf.h" - -static void breathing_callback(PWMDriver *pwmp); - -static PWMConfig pwmCFG = { - 0xFFFF, /* PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - NULL, /* No Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -static PWMConfig pwmCFG_breathing = { - 0xFFFF, /* 10kHz PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - breathing_callback, /* Breathing Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - - -void backlight_init_ports(void) { - palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); - pwmStart(&PWMD3, &pwmCFG); - if(kb_backlight_config.enable){ - if(kb_backlight_config.breathing){ - breathing_enable(); - } else{ - backlight_set(kb_backlight_config.level); - } - } else { - backlight_set(0); - } -} - -void backlight_set(uint8_t level) { - uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); - if (level == 0) { - // Turn backlight off - pwmDisableChannel(&PWMD3, 0); - } else { - // Turn backlight on - if(!is_breathing()){ - pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty)); - } - } -} - - -uint8_t backlight_tick = 0; - -void backlight_task(void) { -} - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -bool is_breathing(void) { - return PWMD3.config == &pwmCFG_breathing; -} - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) - - -void breathing_interrupt_enable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG_breathing); - chSysLockFromISR(); - pwmEnablePeriodicNotification(&PWMD3); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - 0xFFFF - ) - ); - chSysUnlockFromISR(); -} - -void breathing_interrupt_disable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG); -} - -void breathing_enable(void) -{ - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - breathing_interrupt_enable(); -} - -void breathing_pulse(void) -{ - if (kb_backlight_config.level == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - breathing_interrupt_enable(); -} - -void breathing_disable(void) -{ - breathing_interrupt_disable(); - // Restore backlight level - backlight_set(kb_backlight_config.level); -} - -void breathing_self_disable(void) -{ - if (kb_backlight_config.level == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()){ - breathing_disable(); - } else { - breathing_enable(); - } -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * kb_backlight_config.level; -} - -static void breathing_callback(PWMDriver *pwmp) -{ - (void)pwmp; - uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 256); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - breathing_interrupt_disable(); - } - - uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); - - chSysLockFromISR(); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - duty - ) - ); - chSysUnlockFromISR(); -} diff --git a/keyboards/cannonkeys/satisfaction75/led_custom.h b/keyboards/cannonkeys/satisfaction75/led_custom.h deleted file mode 100644 index fe5c9e5dcf..0000000000 --- a/keyboards/cannonkeys/satisfaction75/led_custom.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -void backlight_task(void); -void breathing_interrupt_disable(void); -void breathing_interrupt_enable(void); diff --git a/keyboards/cannonkeys/satisfaction75/mcuconf.h b/keyboards/cannonkeys/satisfaction75/mcuconf.h deleted file mode 100644 index 6d89857962..0000000000 --- a/keyboards/cannonkeys/satisfaction75/mcuconf.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF -// #define STM32F070xB - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/satisfaction75/prototype/prototype.h b/keyboards/cannonkeys/satisfaction75/prototype/prototype.h deleted file mode 100644 index 42e574f3ea..0000000000 --- a/keyboards/cannonkeys/satisfaction75/prototype/prototype.h +++ /dev/null @@ -1,19 +0,0 @@ -#pragma once - -#include "satisfaction75.h" - -#define LAYOUT_default( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} diff --git a/keyboards/cannonkeys/satisfaction75/prototype/rules.mk b/keyboards/cannonkeys/satisfaction75/prototype/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/cannonkeys/satisfaction75/prototype/rules.mk +++ /dev/null diff --git a/keyboards/cannonkeys/satisfaction75/readme.md b/keyboards/cannonkeys/satisfaction75/readme.md deleted file mode 100644 index 361d1eb0f1..0000000000 --- a/keyboards/cannonkeys/satisfaction75/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Satisfaction75 - -Satisfaction75 Keyboard - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: STM32F072CBT6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/Satisfaction75:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/satisfaction75/rev1/rev1.h b/keyboards/cannonkeys/satisfaction75/rev1/rev1.h deleted file mode 100644 index 302b7e43de..0000000000 --- a/keyboards/cannonkeys/satisfaction75/rev1/rev1.h +++ /dev/null @@ -1,108 +0,0 @@ -#pragma once - -#include "satisfaction75.h" - -// This layout is the default - it's what's in VIA -// ANSI, bottom row 1.25/1.25/1.25/6.25/1/1/1 -#define LAYOUT_default( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - -// ISO, bottom row 1.25/1.25/1.25/6.25/1/1/1 -#define LAYOUT_iso( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, bottom row 1.25/1.25/1.25/6.25/1.5/1.5 -#define LAYOUT_3x2( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, KC_NO, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, WKL bottom row 1.5/1.5/7/1.5/1.5, Split Backspace -#define LAYOUT_2x2( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K505, K509, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, KC_NO, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, KC_NO, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, bottom row 1.25/1.25/1.25/2.25/1.25/2.75/1/1/1 -// ANSI, bottom row 1.25/1.25/1.25/2.75/1.25/2.25/1/1/1 -#define LAYOUT_split_space( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K503, K505, K507, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, K503, KC_NO, K505, KC_NO, K507, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - - -// Expose All Keys - Split backspace - ISO Extra keys - Split space bottom row -#define LAYOUT_all( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K503, K505, K507, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, K503, KC_NO, K505, KC_NO, K507, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} diff --git a/keyboards/cannonkeys/satisfaction75/rev1/rules.mk b/keyboards/cannonkeys/satisfaction75/rev1/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/cannonkeys/satisfaction75/rev1/rules.mk +++ /dev/null diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk deleted file mode 100644 index 3e2877200e..0000000000 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ /dev/null @@ -1,57 +0,0 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# - -SRC += led.c \ - satisfaction_encoder.c \ - satisfaction_oled.c - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = no # Custom matrix file -ENCODER_ENABLE = yes -QWIIC_ENABLE += MICRO_OLED -#BACKLIGHT_ENABLE = yes - -# RAW_ENABLE = yes -# DYNAMIC_KEYMAP_ENABLE = yes - -DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1 diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c deleted file mode 100644 index 0e788b29b7..0000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ /dev/null @@ -1,476 +0,0 @@ -#include "satisfaction75.h" -#include "print.h" -#include "debug.h" - -#include "ch.h" -#include "hal.h" - -#ifdef QWIIC_MICRO_OLED_ENABLE -#include "micro_oled.h" -#include "qwiic.h" -#endif - -#include "timer.h" - -#include "raw_hid.h" -#include "dynamic_keymap.h" -#include "tmk_core/common/eeprom.h" - -// HACK -#include "keyboards/zeal60/zeal60_api.h" // Temporary hack -#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack - - -/* Artificial delay added to get media keys to work in the encoder*/ -#define MEDIA_KEY_DELAY 10 - -uint16_t last_flush; - -volatile uint8_t led_numlock = false; -volatile uint8_t led_capslock = false; -volatile uint8_t led_scrolllock = false; - -uint8_t layer; - -bool queue_for_send = false; -bool clock_set_mode = false; -uint8_t oled_mode = OLED_DEFAULT; -bool oled_sleeping = false; - -uint8_t encoder_value = 32; -uint8_t encoder_mode = ENC_MODE_VOLUME; -uint8_t enabled_encoder_modes = 0x1F; - -RTCDateTime last_timespec; -uint16_t last_minute = 0; - -uint8_t time_config_idx = 0; -int8_t hour_config = 0; -int16_t minute_config = 0; -int8_t year_config = 0; -int8_t month_config = 0; -int8_t day_config = 0; -uint8_t previous_encoder_mode = 0; - -backlight_config_t kb_backlight_config = { - .enable = true, - .breathing = true, - .level = BACKLIGHT_LEVELS -}; - -bool eeprom_is_valid(void) -{ - return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && - eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); -} - -void eeprom_set_valid(bool valid) -{ - eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); - eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); -} - -void eeprom_reset(void) -{ - // Set the Zeal60 specific EEPROM state as invalid. - eeprom_set_valid(false); - // Set the TMK/QMK EEPROM state as invalid. - eeconfig_disable(); -} - -#ifdef RAW_ENABLE - -void raw_hid_receive( uint8_t *data, uint8_t length ) -{ - uint8_t *command_id = &(data[0]); - uint8_t *command_data = &(data[1]); - switch ( *command_id ) - { - case id_get_protocol_version: - { - command_data[0] = PROTOCOL_VERSION >> 8; - command_data[1] = PROTOCOL_VERSION & 0xFF; - break; - } - case id_get_keyboard_value: - { - switch( command_data[0]) - { - case id_uptime: - { - uint32_t value = timer_read32(); - command_data[1] = (value >> 24 ) & 0xFF; - command_data[2] = (value >> 16 ) & 0xFF; - command_data[3] = (value >> 8 ) & 0xFF; - command_data[4] = value & 0xFF; - break; - } - case id_oled_default_mode: - { - uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED); - command_data[1] = default_oled; - break; - } - case id_oled_mode: - { - command_data[1] = oled_mode; - break; - - } - case id_encoder_modes: - { - command_data[1] = enabled_encoder_modes; - break; - } - case id_encoder_custom: - { - // uint8_t custom_encoder_idx = command_data[1]; - // command_data[2] = 0x00; - // command_data[3] = 0x00; - // command_data[4] = 0x00; - // command_data[5] = 0x00; - // command_data[6] = 0x00; - // command_data[7] = 0x00; - break; - } - default: - { - *command_id = id_unhandled; - break; - } - } - break; - } -#ifdef DYNAMIC_KEYMAP_ENABLE - case id_set_keyboard_value: - { - switch(command_data[0]){ - case id_oled_default_mode: - { - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED, command_data[1]); - break; - } - case id_oled_mode: - { - oled_mode = command_data[1]; - draw_ui(); - break; - } - case id_encoder_modes: - { - enabled_encoder_modes = command_data[1]; - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, enabled_encoder_modes); - break; - } - case id_encoder_custom: - { - // uint8_t custom_encoder_idx = command_data[1]; - break; - } - default: - { - *command_id = id_unhandled; - break; - } - } - break; - } - case id_dynamic_keymap_get_keycode: - { - uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); - command_data[3] = keycode >> 8; - command_data[4] = keycode & 0xFF; - break; - } - case id_dynamic_keymap_set_keycode: - { - dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); - break; - } - case id_dynamic_keymap_reset: - { - dynamic_keymap_reset(); - break; - } - case id_dynamic_keymap_macro_get_count: - { - command_data[0] = dynamic_keymap_macro_get_count(); - break; - } - case id_dynamic_keymap_macro_get_buffer_size: - { - uint16_t size = dynamic_keymap_macro_get_buffer_size(); - command_data[0] = size >> 8; - command_data[1] = size & 0xFF; - break; - } - case id_dynamic_keymap_macro_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_reset: - { - dynamic_keymap_macro_reset(); - break; - } - case id_dynamic_keymap_get_layer_count: - { - command_data[0] = dynamic_keymap_get_layer_count(); - break; - } - case id_dynamic_keymap_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_set_buffer( offset, size, &command_data[3] ); - break; - } -#endif // DYNAMIC_KEYMAP_ENABLE - case id_eeprom_reset: - { - eeprom_reset(); - break; - } - case id_bootloader_jump: - { - // Need to send data back before the jump - // Informs host that the command is handled - raw_hid_send( data, length ); - // Give host time to read it - wait_ms(100); - bootloader_jump(); - break; - } - default: - { - // Unhandled message. - *command_id = id_unhandled; - break; - } - } - - // Return same buffer with values changed - raw_hid_send( data, length ); - -} - -#endif - - -void read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); - if (leds & (1 << USB_LED_NUM_LOCK)) { - if (led_numlock == false){ - led_numlock = true;} - } else { - if (led_numlock == true){ - led_numlock = false;} - } - if (leds & (1 << USB_LED_CAPS_LOCK)) { - if (led_capslock == false){ - led_capslock = true;} - } else { - if (led_capslock == true){ - led_capslock = false;} - } - if (leds & (1 << USB_LED_SCROLL_LOCK)) { - if (led_scrolllock == false){ - led_scrolllock = true;} - } else { - if (led_scrolllock == true){ - led_scrolllock = false;} - } -} - -uint32_t layer_state_set_kb(uint32_t state) { - state = layer_state_set_user(state); - layer = biton32(state); - queue_for_send = true; - return state; -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - queue_for_send = true; - switch (keycode) { - case OLED_TOGG: - if(!clock_set_mode){ - if (record->event.pressed) { - oled_mode = (oled_mode + 1) % _NUM_OLED_MODES; - draw_ui(); - } - } - return false; - case CLOCK_SET: - if (record->event.pressed) { - if(clock_set_mode){ - pre_encoder_mode_change(); - clock_set_mode = false; - encoder_mode = previous_encoder_mode; - post_encoder_mode_change(); - - }else{ - previous_encoder_mode = encoder_mode; - pre_encoder_mode_change(); - clock_set_mode = true; - encoder_mode = ENC_MODE_CLOCK_SET; - post_encoder_mode_change(); - } - } - return false; - case ENC_PRESS: - if (record->event.pressed) { - uint16_t mapped_code = handle_encoder_press(); - uint16_t held_keycode_timer = timer_read(); - if(mapped_code != 0){ - register_code(mapped_code); - while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } - unregister_code(mapped_code); - } - } else { - // Do something else when release - } - return false; - default: - break; - } - -#ifdef DYNAMIC_KEYMAP_ENABLE - // Handle macros - if (record->event.pressed) { - if ( keycode >= MACRO00 && keycode <= MACRO15 ) - { - uint8_t id = keycode - MACRO00; - dynamic_keymap_macro_send(id); - return false; - } - } -#endif //DYNAMIC_KEYMAP_ENABLE - - return process_record_user(keycode, record); -} - - -void encoder_update_kb(uint8_t index, bool clockwise) { - encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; - queue_for_send = true; - if (index == 0) { - if (layer == 0){ - uint16_t mapped_code = 0; - if (clockwise) { - mapped_code = handle_encoder_clockwise(); - } else { - mapped_code = handle_encoder_ccw(); - } - uint16_t held_keycode_timer = timer_read(); - if(mapped_code != 0){ - register_code(mapped_code); - while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } - unregister_code(mapped_code); - } - } else { - if(clockwise){ - change_encoder_mode(false); - } else { - change_encoder_mode(true); - } - } - } -} - -void dynamic_keymap_custom_reset(void){ - void *p = (void*)(DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT); - void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR); - while ( p != end ) { - eeprom_update_byte(p, 0); - ++p; - } - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, 0x1F); -} - -void save_backlight_config_to_eeprom(){ - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT, kb_backlight_config.raw); -} - -void load_custom_config(){ - kb_backlight_config.raw = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT); -#ifdef DYNAMIC_KEYMAP_ENABLE - oled_mode = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED); - enabled_encoder_modes = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES); -#endif -} - -void eeprom_init_kb(void) -{ - // If the EEPROM has the magic, the data is good. - // OK to load from EEPROM. - if (eeprom_is_valid()) { - load_custom_config(); - } else { - // If the EEPROM has not been saved before, or is out of date, - // save the default values to the EEPROM. Default values - // come from construction of the zeal_backlight_config instance. - //backlight_config_save(); -#ifdef DYNAMIC_KEYMAP_ENABLE - // This resets the keymaps in EEPROM to what is in flash. - dynamic_keymap_reset(); - // This resets the macros in EEPROM to nothing. - dynamic_keymap_macro_reset(); - // Reset the custom stuff - dynamic_keymap_custom_reset(); -#endif - // Save the magic number last, in case saving was interrupted - eeprom_set_valid(true); - } -} - -void matrix_init_kb(void) -{ - eeprom_init_kb(); - rtcGetTime(&RTCD1, &last_timespec); - queue_for_send = true; - backlight_init_ports(); - matrix_init_user(); -} - - -void matrix_scan_kb(void) { - rtcGetTime(&RTCD1, &last_timespec); - uint16_t minutes_since_midnight = last_timespec.millisecond / 1000 / 60; - - if (minutes_since_midnight != last_minute){ - last_minute = minutes_since_midnight; - if(!oled_sleeping){ - queue_for_send = true; - } - } -#ifdef QWIIC_MICRO_OLED_ENABLE - if (queue_for_send && oled_mode != OLED_OFF) { - oled_sleeping = false; - read_host_led_state(); - draw_ui(); - queue_for_send = false; - } - if (timer_elapsed(last_flush) > ScreenOffInterval && !oled_sleeping) { - send_command(DISPLAYOFF); /* 0xAE */ - oled_sleeping = true; - } -#endif -} - diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.h b/keyboards/cannonkeys/satisfaction75/satisfaction75.h deleted file mode 100644 index dfab68017f..0000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.h +++ /dev/null @@ -1,113 +0,0 @@ -#pragma once - -#include "quantum.h" - -#ifdef KEYBOARD_cannonkeys_satisfaction75_prototype - #include "prototype.h" -#else - #include "rev1.h" -#endif - -/* screen off after this many milliseconds */ -#define ScreenOffInterval 60000 /* milliseconds */ - -typedef union { - uint8_t raw; - struct { - bool enable :1; - bool breathing : 1; - uint8_t level :6; - }; -} backlight_config_t; - -// Start these at the USER code range in VIA -enum my_keycodes { - ENC_PRESS = 0x5F80, - CLOCK_SET, - OLED_TOGG -}; - -enum s75_keyboard_value_id { - id_encoder_modes = 0x80, - id_oled_default_mode, - id_encoder_custom, - id_oled_mode -}; - -enum encoder_modes { - ENC_MODE_VOLUME, - ENC_MODE_MEDIA, - ENC_MODE_SCROLL, - ENC_MODE_BRIGHTNESS, - ENC_MODE_BACKLIGHT, - ENC_MODE_CUSTOM0, - ENC_MODE_CUSTOM1, - ENC_MODE_CUSTOM2, - _NUM_ENCODER_MODES, - ENC_MODE_CLOCK_SET // This shouldn't be included in the default modes, so we put it after NUM_ENCODER_MODES -}; - -enum oled_modes { - OLED_DEFAULT, - OLED_TIME, - OLED_OFF, - _NUM_OLED_MODES -}; - - -// Keyboard Information -extern volatile uint8_t led_numlock; -extern volatile uint8_t led_capslock; -extern volatile uint8_t led_scrolllock; -extern uint8_t layer; - -// OLED Behavior -extern uint16_t last_flush; -extern bool queue_for_send; -extern uint8_t oled_mode; -extern bool oled_sleeping; - -// Encoder Behavior -extern uint8_t encoder_value; -extern uint8_t encoder_mode; -extern uint8_t enabled_encoder_modes; - -// RTC -extern RTCDateTime last_timespec; -extern uint16_t last_minute; - -// RTC Configuration -extern bool clock_set_mode; -extern uint8_t time_config_idx; -extern int8_t hour_config; -extern int16_t minute_config; -extern int8_t year_config; -extern int8_t month_config; -extern int8_t day_config; -extern uint8_t previous_encoder_mode; - -// Backlighting -extern backlight_config_t kb_backlight_config; -extern bool kb_backlight_breathing; - -void pre_encoder_mode_change(void); -void post_encoder_mode_change(void); -void change_encoder_mode(bool negative); -uint16_t handle_encoder_clockwise(void); -uint16_t handle_encoder_ccw(void); -uint16_t handle_encoder_press(void); - -void update_time_config(int8_t increment); - -__attribute__ ((weak)) -void draw_ui(void); -void draw_default(void); -void draw_clock(void); - -void backlight_init_ports(void); -void backlight_set(uint8_t level); -bool is_breathing(void); -void breathing_enable(void); -void breathing_disable(void); -void load_custom_config(void); -void save_backlight_config_to_eeprom(void); diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c deleted file mode 100644 index 6776816918..0000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c +++ /dev/null @@ -1,184 +0,0 @@ -#include "satisfaction75.h" - -void pre_encoder_mode_change(){ - if(encoder_mode == ENC_MODE_CLOCK_SET){ - RTCDateTime timespec; - timespec.year = year_config; - timespec.month = month_config; - timespec.day = day_config; - // timespec.dayofweek = last_timespec.dayofweek; - // timespec.dstflag = last_timespec.dstflag; - timespec.millisecond = (hour_config * 60 + minute_config) * 60 * 1000; - rtcSetTime(&RTCD1, ×pec); - } else if (encoder_mode == ENC_MODE_BACKLIGHT){ - save_backlight_config_to_eeprom(); - } -} - -void post_encoder_mode_change(){ - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour_config = (last_minute / 60); - minute_config = last_minute % 60; - year_config = last_timespec.year; - month_config = last_timespec.month; - day_config = last_timespec.day; - time_config_idx = 0; - } -} - -void change_encoder_mode(bool negative){ - pre_encoder_mode_change(); - if(enabled_encoder_modes == 0){ - enabled_encoder_modes = 0x1F; - } - do { - if(negative){ - if (encoder_mode == 0){ - encoder_mode = _NUM_ENCODER_MODES - 1; - } else{ - encoder_mode = encoder_mode - 1; - } - } else { - encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES; - } - } while(((1 << encoder_mode) & enabled_encoder_modes) == 0); - post_encoder_mode_change(); -} - -void update_time_config(int8_t increment){ - uint8_t day_limit = 31; - uint16_t adjusted_year = 1980 + year_config; - switch(time_config_idx){ - case 0: // hour - default: - hour_config = (hour_config + increment) % 24; - if (hour_config < 0){ - hour_config += 24; - } - break; - case 1: // minute - minute_config = (minute_config + increment) % 60; - if (minute_config < 0){ - minute_config += 60; - } - break; - case 2: // year - year_config += increment; - break; - case 3: // month - month_config = (month_config % 12) + increment; - if (month_config <= 0){ - month_config += 12; - } - break; - case 4: //day - if (month_config == 9 || month_config == 4 || month_config == 6 || month_config == 11){ - day_limit = 30; - } else if(month_config == 2){ - day_limit = adjusted_year % 4 == 0 && !(adjusted_year % 100 == 0 && adjusted_year % 400 != 0) ? 29 : 28; - } - day_config = (day_config % day_limit) + increment; - if(day_config <= 0){ - day_config += day_limit; - } - break; - } -} - -uint16_t handle_encoder_clockwise(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mapped_code = KC_VOLU; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_NEXT_TRACK; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_WH_D; - break; - case ENC_MODE_BACKLIGHT: - kb_backlight_config.level = kb_backlight_config.level + 1; - if(kb_backlight_config.level > BACKLIGHT_LEVELS){ - kb_backlight_config.level = BACKLIGHT_LEVELS; - } - backlight_set(kb_backlight_config.level); - if (kb_backlight_config.level != 0){ - kb_backlight_config.enable = true; - } - break; - case ENC_MODE_BRIGHTNESS: - mapped_code = KC_BRIGHTNESS_UP; - break; - case ENC_MODE_CLOCK_SET: - update_time_config(1); - queue_for_send = true; - break; - } - return mapped_code; -} - -uint16_t handle_encoder_ccw(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mapped_code = KC_VOLD; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_PREV_TRACK; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_WH_U; - break; - case ENC_MODE_BACKLIGHT: - // mapped_code = BL_DEC; - if(kb_backlight_config.level != 0){ - kb_backlight_config.level = kb_backlight_config.level - 1; - } - backlight_set(kb_backlight_config.level); - if (kb_backlight_config.level == 0){ - kb_backlight_config.enable = false; - } - break; - case ENC_MODE_BRIGHTNESS: - mapped_code = KC_BRIGHTNESS_DOWN; - break; - case ENC_MODE_CLOCK_SET: - update_time_config(-1); - queue_for_send = true; - break; - } - return mapped_code; -} - -uint16_t handle_encoder_press(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - case ENC_MODE_VOLUME: - mapped_code = KC_MUTE; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_PLAY_PAUSE; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_BTN3; - break; - case ENC_MODE_BACKLIGHT: - // mapped_code = BL_TOGG; - kb_backlight_config.breathing = !kb_backlight_config.breathing; - if(!kb_backlight_config.breathing){ - breathing_disable(); - } else{ - breathing_enable(); - } - break; - case ENC_MODE_CLOCK_SET: - time_config_idx = (time_config_idx + 1) % 5; - default: - case ENC_MODE_BRIGHTNESS: - break; - } - return mapped_code; -} diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c deleted file mode 100644 index 4e22587db8..0000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c +++ /dev/null @@ -1,271 +0,0 @@ -#include "satisfaction75.h" -#include "micro_oled.h" - -__attribute__ ((weak)) -void draw_ui() { -#ifdef QWIIC_MICRO_OLED_ENABLE - clear_buffer(); - last_flush = timer_read(); - send_command(DISPLAYON); - if(clock_set_mode){ - draw_clock(); - return; - } - switch (oled_mode){ - default: - case OLED_DEFAULT: - draw_default(); - break; - case OLED_TIME: - draw_clock(); - break; - case OLED_OFF: - send_command(DISPLAYOFF); - break; - } -#endif -} - -void draw_encoder(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "ENC", PIXEL_ON, NORM, 0); - } else { - startX -= 22; - } - draw_rect_filled_soft(startX + 22, startY + 1, 3 + (3 * 6), 9, PIXEL_ON, NORM); - char* mode_string = ""; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mode_string = "VOL"; - break; - case ENC_MODE_MEDIA: - mode_string = "MED"; - break; - case ENC_MODE_SCROLL: - mode_string = "SCR"; - break; - case ENC_MODE_BRIGHTNESS: - mode_string = "BRT"; - break; - case ENC_MODE_BACKLIGHT: - mode_string = "BKL"; - break; - case ENC_MODE_CLOCK_SET: - mode_string = "CLK"; - break; - case ENC_MODE_CUSTOM0: - mode_string = "CS0"; - break; - case ENC_MODE_CUSTOM1: - mode_string = "CS1"; - break; - case ENC_MODE_CUSTOM2: - mode_string = "CS2"; - break; - } - draw_string(startX + 24, startY + 2, mode_string, PIXEL_ON, XOR, 0); -} - -void draw_layer_section(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "LAYER", PIXEL_ON, NORM, 0); - } else { - startX -= 32; - } - draw_rect_filled_soft(startX + 32, startY + 1, 9, 9, PIXEL_ON, NORM); - draw_char(startX + 34, startY + 2, layer + 0x30, PIXEL_ON, XOR, 0); -} - -void draw_default(){ - uint8_t hour = last_minute / 60; - uint16_t minute = last_minute % 60; - - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - } - - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[2] = ""; - char min_str[2] = ""; - - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); - - uint8_t mods = get_mods(); - -/* Layer indicator is 41 x 10 pixels */ - draw_layer_section(0,0,true); - -#define ENCODER_INDICATOR_X 45 -#define ENCODER_INDICATOR_Y 0 - draw_encoder(ENCODER_INDICATOR_X, ENCODER_INDICATOR_Y, true); -/* Matrix display is 19 x 9 pixels */ -#define MATRIX_DISPLAY_X 0 -#define MATRIX_DISPLAY_Y 18 - - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - for (uint8_t y = 0; y < MATRIX_COLS; y++) { - draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); - } - } - draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM); - /* hadron oled location on thumbnail */ - draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM); - -/* Mod display is 41 x 16 pixels */ -#define MOD_DISPLAY_X 30 -#define MOD_DISPLAY_Y 18 - - if (mods & MOD_LSFT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LCTL) { - draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LALT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LGUI) { - draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); - } - -/* Lock display is 23 x 21 */ -#define LOCK_DISPLAY_X 100 -#define LOCK_DISPLAY_Y 0 - - if (led_capslock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_ON, NORM, 0); - } - - if (led_scrolllock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_OFF, NORM, 0); - } else if (led_scrolllock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_ON, NORM, 0); - } - -#define TIME_DISPLAY_X 82 -#define TIME_DISPLAY_Y 22 - draw_string(TIME_DISPLAY_X, TIME_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 11, TIME_DISPLAY_Y, ":", PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 15, TIME_DISPLAY_Y, min_str, PIXEL_ON, NORM, 0); - if(is_pm){ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "pm", PIXEL_ON, NORM, 0); - } else{ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "am", PIXEL_ON, NORM, 0); - } - - send_buffer(); -} - -void draw_clock(){ - int8_t hour = last_minute / 60; - int16_t minute = last_minute % 60; - int16_t year = last_timespec.year + 1980; - int8_t month = last_timespec.month; - int8_t day = last_timespec.day; - - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - year = year_config + 1980; - month = month_config; - day = day_config; - } - - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[2] = ""; - char min_str[2] = ""; - char year_str[4] = ""; - char month_str[2] = ""; - char day_str[2] = ""; - - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); - sprintf(year_str, "%d", year); - sprintf(month_str, "%02d", month); - sprintf(day_str, "%02d", day); - - -#define DATE_DISPLAY_X 6 -#define DATE_DISPLAY_Y 0 - draw_string(DATE_DISPLAY_X, DATE_DISPLAY_Y, year_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 25, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y, month_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 44, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y, day_str, PIXEL_ON, NORM, 0); - -#define CLOCK_DISPLAY_X 6 -#define CLOCK_DISPLAY_Y 14 - draw_string(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 17, CLOCK_DISPLAY_Y, ":", PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y, min_str, PIXEL_ON, NORM, 1); - if(is_pm){ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "pm", PIXEL_ON, NORM, 1); - } else{ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "am", PIXEL_ON, NORM, 1); - } - - if(clock_set_mode){ - switch(time_config_idx){ - case 0: // hour - default: - draw_line(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 16, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 1: // minute - draw_line(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 2: // year - draw_line(DATE_DISPLAY_X, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 23, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 3: // month - draw_line(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 43, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 4: //day - draw_line(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 61, DATE_DISPLAY_Y + 9,PIXEL_ON, NORM); - break; - } - } - - draw_encoder(80, 0, true); - draw_layer_section(80, 11, true); - -#define CAPS_DISPLAY_X 86 -#define CAPS_DISPLAY_Y 22 - - if (led_capslock == true) { - draw_rect_filled_soft(CAPS_DISPLAY_X, CAPS_DISPLAY_Y, 5 + (4 * 6), 9, PIXEL_ON, NORM); - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_ON, NORM, 0); - } - - - send_buffer(); - -} |