remove all keyboards but ergodox and planck

8 files changed, 0 insertions, 466 deletions

diff --git a/keyboards/bthlabs/geekpad/config.h b/keyboards/bthlabs/geekpad/config.h
deleted file mode 100644
index 017bee1848..0000000000
--- a/keyboards/bthlabs/geekpad/config.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
-Copyright 2019-present Tomek Wójcik <contact@bthlabs.pl>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4257
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    BTHLabs
-#define PRODUCT         GeekPad
-#define DESCRIPTION     3x3 custom macro pad
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 3
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F5, F6 }
-#define MATRIX_COL_PINS { D4, D0, D1 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLIGHT_ANIMATIONS
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/bthlabs/geekpad/geekpad.c b/keyboards/bthlabs/geekpad/geekpad.c
deleted file mode 100644
index e52507c93d..0000000000
--- a/keyboards/bthlabs/geekpad/geekpad.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright 2019-present Tomek Wójcik <contact@bthlabs.pl>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "geekpad.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}
diff --git a/keyboards/bthlabs/geekpad/geekpad.h b/keyboards/bthlabs/geekpad/geekpad.h
deleted file mode 100644
index c9f1ac9d4f..0000000000
--- a/keyboards/bthlabs/geekpad/geekpad.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2019-present Tomek Wójcik <contact@bthlabs.pl>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef GEEKPAD_H
-#define GEEKPAD_H
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    K00, K01, K02, \
-    K10, K11, K12, \
-    K20, K21, K22  \
-) \
-{ \
-    { K00,   K01,   K02 }, \
-    { K10,   K11,   K12 }, \
-    { K20,   K21,   K22 }  \
-}
-
-#endif
diff --git a/keyboards/bthlabs/geekpad/info.json b/keyboards/bthlabs/geekpad/info.json
deleted file mode 100644
index c95497c553..0000000000
--- a/keyboards/bthlabs/geekpad/info.json
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-  "keyboard_name": "BTHLabs GeekPad",
-  "url": "https://git.bthlabs.pl/tomekwojcik/geekpad",
-  "maintainer": "Tomek Wójcik <contact@bthlabs.pl>",
-  "width": 3,
-  "height": 3,
-  "layouts": {
-    "LAYOUT": {
-      "layout": [
-        {"x": 0, "y": 0},
-        {"x": 1, "y": 0},
-        {"x": 2,"y": 0},
-        {"x": 0, "y": 1},
-        {"x": 1, "y": 1},
-        {"x": 2,"y": 1},
-        {"x": 0, "y": 2},
-        {"x": 1, "y": 2},
-        {"x": 2,"y": 2}
-      ]
-    }
-  }
-}
diff --git a/keyboards/bthlabs/geekpad/keymaps/default/config.h b/keyboards/bthlabs/geekpad/keymaps/default/config.h
deleted file mode 100644
index 1cba162c79..0000000000
--- a/keyboards/bthlabs/geekpad/keymaps/default/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright 2019-present Tomek Wójcik <contact@bthlabs.pl>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here
diff --git a/keyboards/bthlabs/geekpad/keymaps/default/keymap.c b/keyboards/bthlabs/geekpad/keymaps/default/keymap.c
deleted file mode 100644
index a8791e70ca..0000000000
--- a/keyboards/bthlabs/geekpad/keymaps/default/keymap.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2019-present Tomek Wójcik <contact@bthlabs.pl>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT( /* Base */
-    KC_F1, KC_F2, KC_F3,
-    KC_MEDIA_REWIND, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_FAST_FORWARD,
-    KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP
-  ),
-};
diff --git a/keyboards/bthlabs/geekpad/readme.md b/keyboards/bthlabs/geekpad/readme.md
deleted file mode 100644
index 6558c32d97..0000000000
--- a/keyboards/bthlabs/geekpad/readme.md
+++ /dev/null
@@ -1,15 +0,0 @@
-# BTHLabs GeekPad
-
-![GeekPad](https://i.imgur.com/FEzO81l.jpg)
-
-A 3x3 custom macro pad designed and developed by Tomek Wójcik.
-
-Keyboard Maintainer: [Tomek Wójcik](https://www.bthlabs.pl/)  
-Hardware Supported: GeekPad Custom PCB  
-Hardware Availability: [Project Repository](https://git.bthlabs.pl/tomekwojcik/geekpad)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bthlabs/geekpad:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk
deleted file mode 100644
index d4785aabbe..0000000000
--- a/keyboards/bthlabs/geekpad/rules.mk
+++ /dev/null
@@ -1,81 +0,0 @@
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = caterina
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)