remove all keyboards but ergodox and planck

11 files changed, 0 insertions, 909 deletions

diff --git a/keyboards/bpiphany/kitten_paw/config.h b/keyboards/bpiphany/kitten_paw/config.h
deleted file mode 100644
index 5ecf6d8dd8..0000000000
--- a/keyboards/bpiphany/kitten_paw/config.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6050
-#define DEVICE_VER      0x0104
-#define MANUFACTURER    Costar
-#define PRODUCT         Majestouch
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-//#define MATRIX_ROW_PINS { D0, D5 }
-//#define MATRIX_COL_PINS { F1, F0, B0 }
-//#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/bpiphany/kitten_paw/info.json b/keyboards/bpiphany/kitten_paw/info.json
deleted file mode 100644
index 7d2574710a..0000000000
--- a/keyboards/bpiphany/kitten_paw/info.json
+++ /dev/null
@@ -1,18 +0,0 @@
-{
-  "keyboard_name": "Kitten Paw",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 22.5,
-  "height": 6.5,
-  "layouts": {
-    "LAYOUT": {
-      "key_count": 105,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"KC_NUBS", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
-    },
-
-    "LAYOUT_fullsize_ansi": {
-      "key_count": 104,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
-    }
-  }
-}
diff --git a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c
deleted file mode 100644
index 3ad3247d49..0000000000
--- a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include QMK_KEYBOARD_H
-
-enum layers {
-    DEFAULT,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [DEFAULT] = LAYOUT(\
-       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_PSCR,KC_SLCK,KC_PAUS,                        \
-       KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
-       KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
-      KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
-      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
-      KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h
deleted file mode 100644
index 142aba8909..0000000000
--- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#undef MOUSEKEY_MOVE_MAX
-#define MOUSEKEY_MOVE_MAX       127
-#undef MOUSEKEY_WHEEL_MAX
-#define MOUSEKEY_WHEEL_MAX      110
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA     5
-#undef MOUSEKEY_WHEEL_DELTA
-#define MOUSEKEY_WHEEL_DELTA    1
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 50
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 20
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 4
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 30
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 3
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 255
-#undef ONESHOT_TIMEOUT
-#define ONESHOT_TIMEOUT 500
-#undef TAPPING_TOGGLE
-#define TAPPING_TOGGLE 2
-
-#endif
diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c
deleted file mode 100644
index e2b56132bf..0000000000
--- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c
+++ /dev/null
@@ -1,239 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "mousekey.h"
-
-#undef C
-#undef S
-#define C(kc) LCTL(KC_##kc)
-#define S(kc) LSFT(KC_##kc)
-#define RA(kc) RALT(KC_##kc)
-#define KC_SLCT KC_SELECT
-#define MEDAPP LT(MEDIA, KC_APP)
-
-uint8_t current_layer_global = 255;
-
-enum layers {
-    DEFAULT,
-    PROG1,
-    PROG2,
-    MEDIA,
-    MOUSE1,
-    MOUSE2,
-    MISC,
-};
-
-enum function_id {
-    LSHFT_PAREN,
-    RSHFT_PAREN,
-    LCTRL_BRACKET,
-    RCTRL_BRACKET,
-    LALT_CURLY,
-    RALT_CURLY,
-    CTRL_CLICK
-};
-
-enum macro_id {
-    GRV,
-    CFLEX
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [DEFAULT] = LAYOUT(\
-          KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,           KC_PSCR,KC_SLCK,KC_PAUS,                                   \
-          KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,    KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
-          KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,    KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
-        TT(MOUSE1), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                               KC_P4,  KC_P5,  KC_P6,         \
-            F(8),KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,           F(9),             KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
-            F(1),KC_LGUI,   F(3),              LT(MISC,  KC_SPC),                           F(4),TT(PROG1), MEDAPP, F(2),   KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT),
-  /* Layer 1: Programming Layer 1, emulating US l ayout */
-  [PROG1] = LAYOUT(\
-          KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
-          M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH,   S(0),_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,_______,_______,_______,_______,   KC_Z,_______,_______,_______,_______,  RA(8),  RA(9),RA(MINS),  _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS),        _______,                             _______,_______,_______,         \
-       MO(PROG2),_______,   KC_Y,_______,_______,_______,_______,_______,_______,_______,_______,   S(7),      MO(PROG2),           _______,          _______,_______,_______,_______, \
-         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
-    /* Layer 2: programming layer 2
-       all keys that are not FN keys are sent as LSFT+key on this layer
-    */
-  [PROG2] = LAYOUT(\
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
-        RA(RBRC),_______,  RA(Q),KC_BSLS,_______,_______,M(CFLEX),  S(6),S(RBRC),   S(8),   S(9),S(SLSH),KC_RBRC,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  RA(7),  RA(0),RA(NUBS),  _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT),   S(2),        _______,                             _______,_______,_______,         \
-         _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS),        _______,           _______,          _______,_______,_______,_______, \
-         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
-    /* Layer 3: media layer */
-  [MEDIA] = LAYOUT(\
-          KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,           XXXXXXX,XXXXXXX,XXXXXXX,                                   \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_MPRV,KC_MPLY,KC_MNXT,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,   KC_VOLD,KC_MUTE,KC_VOLU,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,                             XXXXXXX,XXXXXXX,XXXXXXX,         \
-         XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,        XXXXXXX,           KC_EJCT,          XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
-         XXXXXXX,XXXXXXX,XXXXXXX,                        XXXXXXX,                        XXXXXXX,XXXXXXX,_______,XXXXXXX,   KC_MRWD,KC_MSTP,KC_MFFD,  XXXXXXX,XXXXXXX),
-    /* Layer 4: Mouse layer */
-  [MOUSE1] = LAYOUT(\
-            F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
-         _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______,   C(Z),_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R,   F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______,        _______,                             _______,_______,_______,         \
-      MO(MOUSE2),_______,   C(Y),   C(X),   C(C),   C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______,        KC_RSFT,           _______,          _______,_______,_______,_______, \
-         KC_LCTL,_______,KC_LALT,                        KC_BTN1,                        KC_RALT,KC_RGUI, KC_APP,KC_RCTL,   _______,_______,_______,  _______,_______),
-    /* Layer 5: Mouse layer 2*/
-  [MOUSE2] = LAYOUT(\
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           _______,_______,_______,                                   \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______,        _______,                             _______,_______,_______,         \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,           _______,          _______,_______,_______,_______, \
-         _______,_______,_______,                        _______,                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
-    /* Layer 6: Misc layer */
-  [MISC] = LAYOUT(\
-         _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24,           _______,_______,_______,                                   \
-         _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,KC_SLCT,   C(W),  KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______,   _______,_______,_______,  _______,_______,_______,_______, \
-         _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______,        _______,                             _______,_______,_______,         \
-         KC_LSFT,_______,   C(Y),   C(X),   C(C),   C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______,        _______,           _______,          _______,_______,_______,_______, \
-         _______,_______,_______,               LT(MISC, KC_SPC),                        _______,_______,_______,_______,   _______,_______,_______,  _______,_______),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET),   // tap to print [
-    [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET),   // tap to print ]
-    [3] = ACTION_FUNCTION_TAP(LALT_CURLY),      // tap to print {
-    [4] = ACTION_FUNCTION_TAP(RALT_CURLY),      // tap to print }
-    [6] = ACTION_LAYER_SET_CLEAR(DEFAULT),
-    [7] = ACTION_FUNCTION_TAP(CTRL_CLICK),
-    [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN),     // tap to print (
-    [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN),     // tap to print )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case GRV: // macro to print accent grave
-            return (record->event.pressed ?
-                    MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) :
-                    MACRO_NONE );
-        case CFLEX: // print accent circonflex
-            return (record->event.pressed ?
-                    MACRO( T(GRV), T(SPC), END ) :
-                    MACRO_NONE );
-      }
-    return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-    uint8_t layer;
-    layer = biton32(layer_state);
-
-    if (current_layer_global != layer) {
-        current_layer_global = layer;
-
-        // unset CAPSLOCK and SCROLL LOCK LEDs
-        led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK));
-        led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK));
-        // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active
-        if (layer == MOUSE1 || layer == MOUSE2) {
-          led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK));
-        } else if (layer == PROG1 || layer == PROG2) {
-          led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK));
-        }
-    }
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
-
-void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) {
-  if (record->event.pressed) {
-      if (record->tap.count > 0 && !record->tap.interrupted) {
-          if (record->tap.interrupted) {
-              register_mods(MOD_BIT(orig_mod));
-          }
-      } else {
-          register_mods(MOD_BIT(orig_mod));
-      }
-  } else {
-      if (record->tap.count > 0 && !(record->tap.interrupted)) {
-          add_weak_mods(MOD_BIT(macro_mod));
-          send_keyboard_report();
-          register_code(macro_kc);
-          unregister_code(macro_kc);
-          del_weak_mods(MOD_BIT(macro_mod));
-          send_keyboard_report();
-          record->tap.count = 0;  // ad hoc: cancel tap
-      } else {
-          unregister_mods(MOD_BIT(orig_mod));
-      }
-  }
-}
-
-/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-    // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder
-    switch (id) {
-        case LCTRL_BRACKET:
-            tap_helper(record, KC_LCTL, KC_RALT, KC_8);
-            break;
-        case RCTRL_BRACKET:
-            tap_helper(record, KC_RCTL, KC_RALT, KC_9);
-            break;
-        case LALT_CURLY:
-            tap_helper(record, KC_LALT, KC_RALT, KC_7);
-            break;
-        case RALT_CURLY:
-            tap_helper(record, KC_RALT, KC_RALT, KC_0);
-            break;
-        case LSHFT_PAREN:
-            tap_helper(record, KC_LSFT, KC_LSFT, KC_8);
-            break;
-        case RSHFT_PAREN:
-            tap_helper(record, KC_RSFT, KC_LSFT, KC_9);
-            break;
-        case CTRL_CLICK:
-            if (record->event.pressed) {
-                mousekey_clear();
-                register_mods(MOD_BIT(KC_LCTL));
-                send_keyboard_report();
-                wait_ms(5);
-                mousekey_on(KC_BTN1);
-                mousekey_send();
-                wait_ms(10);
-                mousekey_off(KC_BTN1);
-                mousekey_send();
-                wait_ms(5);
-                unregister_mods(MOD_BIT(KC_LCTL));
-                send_keyboard_report();
-            }
-            break;
-    }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    uint8_t layer;
-    layer = biton32(layer_state);
-    if (layer == PROG2) {
-         if (keycode >= KC_A && keycode <= KC_EXSEL && \
-             !(  // do not send LSFT + these keycodes, they are needed for emulating the US layout
-                 keycode == KC_NONUS_BSLASH ||
-                 keycode == KC_RBRC ||
-                 keycode == KC_BSLS ||
-                 keycode == KC_GRV
-            )) {
-              // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior
-              if (record->event.pressed) {
-                  register_mods(MOD_LSFT);
-              } else {
-                  unregister_mods(MOD_LSFT);
-              }
-         }
-    }
-    return true;
-}
diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md
deleted file mode 100644
index 0d23be4eac..0000000000
--- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# My personal keymap for the Kitten Paw controller
-
-This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished.
-
-## Description of the layers
-Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except:
-Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer.
-Mouse and programming layer switches can be held or double-tapped to lock.
-Holding space switches to the MISC layer where I currently accumulate useful shortcuts.
-Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively.
-
-Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it.
-
-Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster.
-
-Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap.
-
-Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file
diff --git a/keyboards/bpiphany/kitten_paw/kitten_paw.c b/keyboards/bpiphany/kitten_paw/kitten_paw.c
deleted file mode 100644
index 26cb533f2d..0000000000
--- a/keyboards/bpiphany/kitten_paw/kitten_paw.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "kitten_paw.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    CONFIG_LED_IO;
-    CONFIG_LED_IO;
-    print_dec(usb_led);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-        USB_LED_CAPS_LOCK_ON;
-    else
-        USB_LED_CAPS_LOCK_OFF;
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-        USB_LED_NUM_LOCK_ON;
-    else
-        USB_LED_NUM_LOCK_OFF;
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-        USB_LED_SCROLL_LOCK_ON;
-    else
-        USB_LED_SCROLL_LOCK_OFF;
-	led_set_user(usb_led);
-}
diff --git a/keyboards/bpiphany/kitten_paw/kitten_paw.h b/keyboards/bpiphany/kitten_paw/kitten_paw.h
deleted file mode 100644
index 4de550f81a..0000000000
--- a/keyboards/bpiphany/kitten_paw/kitten_paw.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef KITTEN_PAW_H
-#define KITTEN_PAW_H
-
-#include "quantum.h"
-
-#define CONFIG_LED_IO \
-  DDRB |= (1<<7); \
-  DDRC |= (1<<5) | (1<<6);
-
-#define USB_LED_CAPS_LOCK_ON    PORTC &= ~(1<<6)
-#define USB_LED_CAPS_LOCK_OFF   PORTC |=  (1<<6)
-#define USB_LED_NUM_LOCK_ON     PORTB &= ~(1<<7)
-#define USB_LED_NUM_LOCK_OFF    PORTB |=  (1<<7)
-#define USB_LED_SCROLL_LOCK_ON  PORTC &= ~(1<<5)
-#define USB_LED_SCROLL_LOCK_OFF PORTC |=  (1<<5)
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-/*
-  Matrix col/row mapping
-
-  ,----.    ,-------------------. ,-------------------. ,-------------------. ,--------------.
-  | J6 |    | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
-  `----'    `-------------------' `-------------------' `-------------------' `--------------'
-  ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
-  | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 |     B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
-  |-------------------------------------------------------------------------| |--------------| |-------------------|
-  | J2   | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 |   B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
-  |-------------------------------------------------------------------------| '--------------' |--------------     |
-  | O5    | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 |       B1 |                  | K2 | L2 | Q2 |    |
-  |-------------------------------------------------------------------------|      ,----.      |-------------------|
-  | N2 | I6 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 |          N3 |      | O6 |      | K3 | L3 | Q3 | O3 |
-  |-------------------------------------------------------------------------| ,--------------. |--------------     |
-  | A4 | P2 | C6 |                  K6                  | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6      | Q6 |    |
-  `-------------------------------------------------------------------------' `--------------' `-------------------'
-*/
-
-#define LAYOUT( \
-  KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
-  KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
-  KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
-  KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
-  KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
-  KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
-) \
-{ \
-    {KC_NO,  KB0,  KC0,  KD0,KC_NO,  KF0,  KG0,KC_NO,KC_NO,KC_NO,  KK0,  KL0,KC_NO,KC_NO,  KO0,KC_NO,  KQ0,  KR0}, \
-    {  KA1,  KB1,KC_NO,  KD1,  KE1,  KF1,  KG1,  KH1,  KI1,  KJ1,  KK1,  KL1,KC_NO,KC_NO,KC_NO,KC_NO,  KQ1,KC_NO}, \
-    {KC_NO,  KB2,KC_NO,  KD2,  KE2,  KF2,  KG2,  KH2,  KI2,  KJ2,  KK2,  KL2,KC_NO,  KN2,KC_NO,  KP2,  KQ2,  KR2}, \
-    {KC_NO,  KB3,KC_NO,  KD3,  KE3,  KF3,  KG3,  KH3,  KI3,  KJ3,  KK3,  KL3,  KM3,  KN3,  KO3,KC_NO,  KQ3,  KR3}, \
-    {  KA4,  KB4,KC_NO,  KD4,  KE4,  KF4,  KG4,  KH4,  KI4,  KJ4,  KK4,  KL4,KC_NO,KC_NO,  KO4,KC_NO,  KQ4,  KR4}, \
-    {  KA5,KC_NO,  KC5,  KD5,  KE5,  KF5,  KG5,  KH5,  KI5,  KJ5,  KK5,  KL5,KC_NO,KC_NO,  KO5,KC_NO,  KQ5,  KR5}, \
-    {KC_NO,  KB6,  KC6,KC_NO,  KE6,  KF6,  KG6,  KH6,  KI6,  KJ6,  KK6,  KL6,KC_NO,KC_NO,  KO6,KC_NO,  KQ6,  KR6}, \
-    {  KA7,  KB7,  KC7,  KD7,  KE7,  KF7,  KG7,  KH7,  KI7,  KJ7,KC_NO,KC_NO,KC_NO,KC_NO,  KO7,KC_NO,  KQ7,  KR7} \
-}
-
-#define LAYOUT_fullsize_ansi( \
-  KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
-  KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
-  KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
-  KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
-  KN2,      KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
-  KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
-) \
-{ \
-    {KC_NO,  KB0,  KC0,  KD0,KC_NO,  KF0,  KG0,KC_NO,KC_NO,KC_NO,  KK0,  KL0,KC_NO,KC_NO,  KO0,KC_NO,  KQ0,  KR0}, \
-    {  KA1,  KB1,KC_NO,  KD1,  KE1,  KF1,  KG1,  KH1,  KI1,  KJ1,  KK1,  KL1,KC_NO,KC_NO,KC_NO,KC_NO,  KQ1,KC_NO}, \
-    {KC_NO,  KB2,KC_NO,  KD2,  KE2,  KF2,  KG2,  KH2,  KI2,  KJ2,  KK2,  KL2,KC_NO,  KN2,KC_NO,  KP2,  KQ2,  KR2}, \
-    {KC_NO,  KB3,KC_NO,  KD3,  KE3,  KF3,  KG3,  KH3,  KI3,  KJ3,  KK3,  KL3,  KM3,  KN3,  KO3,KC_NO,  KQ3,  KR3}, \
-    {  KA4,  KB4,KC_NO,  KD4,  KE4,  KF4,  KG4,  KH4,  KI4,  KJ4,  KK4,  KL4,KC_NO,KC_NO,  KO4,KC_NO,  KQ4,  KR4}, \
-    {  KA5,KC_NO,  KC5,  KD5,  KE5,  KF5,  KG5,  KH5,  KI5,  KJ5,  KK5,  KL5,KC_NO,KC_NO,  KO5,KC_NO,  KQ5,  KR5}, \
-    {KC_NO,  KB6,  KC6,KC_NO,  KE6,  KF6,  KG6,  KH6,  KC_NO,KJ6,  KK6,  KL6,KC_NO,KC_NO,  KO6,KC_NO,  KQ6,  KR6}, \
-    {  KA7,  KB7,  KC7,  KD7,  KE7,  KF7,  KG7,  KH7,  KI7,  KJ7,KC_NO,KC_NO,KC_NO,KC_NO,  KO7,KC_NO,  KQ7,  KR7} \
-}
-
-#endif
diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c
deleted file mode 100644
index 6fdbfffd62..0000000000
--- a/keyboards/bpiphany/kitten_paw/matrix.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
-  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-  This program is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-static uint8_t debouncing = DEBOUNCING_DELAY;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint8_t read_rows(void);
-static void select_col(uint8_t col);
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline uint8_t matrix_rows(void) {
-  return MATRIX_ROWS;
-}
-
-inline uint8_t matrix_cols(void) {
-  return MATRIX_COLS;
-}
-
-/* Column pin configuration
- *
- * col: 0    1    2    3    4    5    6    7
- * pin: PC7  PD5  PD3  PD1  PC2  PD6  PD4  PD2
- *
- * Rrr pin configuration
- *
- * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low
- * active), together with 2 rrrs driven directly from the micro
- * controller, to control the 18 rrrs. The rrrs are driven from
- * pins B6,5,4,3,2,1,0.
- */
-void matrix_init(void) {
-  DDRC  &= ~0b10000100;  // Row input pins
-  DDRD  &= ~0b01111110;
-  PORTC |=  0b10000100;
-  PORTD |=  0b01111110;
-
-  DDRB  |=  0b01111111;  // Column output pins
-
-  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
-    matrix[i] = 0;
-    matrix_debouncing[i] = 0;
-  }
-  matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
-  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
-    select_col(col);
-    _delay_us(3);
-    uint8_t rows = read_rows();
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
-      bool curr_bit = rows & (1<<row);
-      if (prev_bit != curr_bit) {
-        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
-        debouncing = DEBOUNCING_DELAY;
-      }
-    }
-  }
-
-  if (debouncing) {
-    if (--debouncing) {
-      _delay_ms(1);
-    }
-    else {
-      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        matrix[i] = matrix_debouncing[i];
-      }
-    }
-  }
-  matrix_scan_quantum();
-  return 1;
-}
-
-bool matrix_is_modified(void) {
-  if (debouncing)
-    return false;
-  else
-    return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) {
-  return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
-  return matrix[row];
-}
-
-void matrix_print(void) {
-  print("\nr/c 0123456789ABCDEF\n");
-  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
-  }
-}
-
-uint8_t matrix_key_count(void) {
-  uint8_t count = 0;
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    count += bitpop32(matrix[i]);
-  }
-  return count;
-}
-
-static uint8_t read_rows(void) {
-  return
-    (PINC&(1<<7) ? 0 : (1<<0)) |
-    (PIND&(1<<5) ? 0 : (1<<1)) |
-    (PIND&(1<<3) ? 0 : (1<<2)) |
-    (PIND&(1<<1) ? 0 : (1<<3)) |
-    (PINC&(1<<2) ? 0 : (1<<4)) |
-    (PIND&(1<<2) ? 0 : (1<<5)) |
-    (PIND&(1<<4) ? 0 : (1<<6)) |
-    (PIND&(1<<6) ? 0 : (1<<7));
-}
-
-static void select_col(uint8_t col) {
-  switch (col) {
-  case  0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break;
-  case  1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break;
-  case  2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break;
-  case  3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break;
-  case  4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break;
-  case  5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break;
-  case  6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break;
-  case  7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break;
-  case  8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break;
-  case  9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break;
-  case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break;
-  case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break;
-  case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break;
-  case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break;
-  case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break;
-  case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break;
-  case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break;
-  case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break;
-  }
-}
diff --git a/keyboards/bpiphany/kitten_paw/readme.md b/keyboards/bpiphany/kitten_paw/readme.md
deleted file mode 100644
index 15737a3a9b..0000000000
--- a/keyboards/bpiphany/kitten_paw/readme.md
+++ /dev/null
@@ -1,16 +0,0 @@
-kitten_paw
-==========
-
-This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies).
-
-NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: Kitten Paw PCB  
-Hardware Availability: https://geekhack.org/index.php?topic=46700.0
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bpiphany/kitten_paw:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk
deleted file mode 100644
index fab9c422fe..0000000000
--- a/keyboards/bpiphany/kitten_paw/rules.mk
+++ /dev/null
@@ -1,74 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u2
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-	OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-
-LAYOUTS = fullsize_ansi