Merge remote-tracking branch 'qmk/master'

1 files changed, 362 insertions, 0 deletions

diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h
new file mode 100644
index 0000000000..f9e7ed75d9
--- /dev/null
+++ b/keyboards/atreus62/pro_micro.h
@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */