Anne Pro 2 Refactor (#16864)

* move RGB Matrix rules to keyboard level

* move PERMISSIVE_HOLD config to keyboard level

* annepro2.c: convert tabs to spaces

* refactor rules.mk files

Reformats each version's `rules.mk` file to be arranged more similarly to those of the rest of the keyboards in QMK.

No logic change.

* annepro2.c: allow compilation without RGB Matrix

Wraps the `led_enabled` definition and the `KC_AP_RGB_*` keycodes in `#ifdef RGB_MATRIX_ENABLE`, allowing successful compilation if the user sets `RGB_MATRIX_ENABLE = no`.

* rework readme files

Reworks the main `readme.md` file to be more friendly to GitHub viewing, and removes the single-line version-specific readme files (exposes the main readme to QMK Configurator users).

* info.json: update maintainer value

* info.json: apply friendly formatting

1 files changed, 19 insertions, 21 deletions

diff --git a/keyboards/annepro2/readme.md b/keyboards/annepro2/readme.md
index e3e0b95be4..b8b3b84543 100644
--- a/keyboards/annepro2/readme.md
+++ b/keyboards/annepro2/readme.md
@@ -1,12 +1,10 @@
 # Anne Pro 2 rev. C15 and C18 QMK firmware
 
-## Introduction
+An ANSI-layout 60% keyboard featuring Bluetooth support and per-key RGB lighting.
 
-This is the QMK firmware repository for the Anne Pro 2 rev. C15 and C18 keyboard.
-
-## Layouts
-
-Keyboard has 60% ANSI standard layout.
+* Keyboard Maintainer: [bwisn](https://github.com/bwisn)
+* Hardware Supported: Anne Pro 2, [C15](c15/) and [C18](c18/) versions
+* Hardware Availability: [annepro.net](https://www.annepro.net/), [Hexcore](https://www.hexcore.xyz/annepro2)
 
 ## How to compile
 
@@ -25,26 +23,26 @@ If you want to compile the Anne Pro 2 C15 default keymap use:
 If you want the executable instead of compiling it yourself, [download it here](https://ci.codetector.org/job/OpenAnnePro/job/AnnePro2-Tools/job/master/).
 Windows and Linux versions are available. Otherwise, follow the steps below:
 
-0. Install the latest stable `rust` toolchain using [rustup](https://rustup.rs/)
-0. Also install [Visual Studio Community edition](https://visualstudio.microsoft.com/downloads/)
+1. Install the latest stable `rust` toolchain using [rustup](https://rustup.rs/)
+1. Also install [Visual Studio Community edition](https://visualstudio.microsoft.com/downloads/)
 including the C/C++ module to prevent errors while compiling
-0. Download or Clone the [AnnePro2-Tools](https://github.com/OpenAnnePro/AnnePro2-Tools) project.
-0. Compile the tool using
-```bash
-cargo build --release
-```
-0. The compiled tool should be in `./target/release/annepro2_tools` (In later I will refer to this as `annepro2_tools`)
+1. Download or Clone the [AnnePro2-Tools](https://github.com/OpenAnnePro/AnnePro2-Tools) project.
+1. Compile the tool using
+   ```bash
+   cargo build --release
+   ```
+   The compiled tool should be in `./target/release/annepro2_tools` (In later I will refer to this as `annepro2_tools`)
 
 ### Flashing the firmware
-0. Put the keyboard into DFU/IAP mode by unplugging the keyboard, then holding ESC while plugging it back in.
-0. Run annepro2_tools with the firmware you just built.
 
-**Please substitute with the correct paths and correct bin file if you chose another keymap profile**
-```bash
-annepro2_tools annepro2_c15_default.bin
-```
+1. Put the keyboard into DFU/IAP mode by unplugging the keyboard, then holding ESC while plugging it back in.
+1. Run annepro2_tools with the firmware you just built.  
+   **Please substitute with the correct paths and correct bin file if you chose another keymap profile.**
+   ```bash
+   annepro2_tools annepro2_c15_default.bin
+   ```
 
 If the tool can't find the keyboard please double check you have the keyboard in IAP mode.
 
 
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).