summaryrefslogtreecommitdiff
path: root/keyboards/412_64/rules.mk
diff options
context:
space:
mode:
authorFateEverywhere <41215461+FateEverywhere@users.noreply.github.com>2018-11-13 11:38:48 -0500
committerDrashna Jaelre <drashna@live.com>2018-11-13 08:38:48 -0800
commit4609d68ddcf4b5094e8183f99549fe83af3cc144 (patch)
tree4dbf22a74b9302a70442c0f9803ae4b44ff5099e /keyboards/412_64/rules.mk
parent2dea540afbfcffaea82f70b6642c39aedb9e3b5b (diff)
Keyboard: Add 412 64 Model 00 keyboard. (#4400)
* Add 412-64 keyboard firmware It's pretty barebones for now, but the Model 00 is also a pretty barebones machine. Model 01 won't be better, but plenty of pins exist for things like LEDs on Model 02. * MANU/PROD ID changes. Changed around the MANUFACTURER and PRODUCT IDs to be more polite when viewed in qmk toolbox. * Fixing PROD again. For the love of all that is good and holy, that was ugly. This new one looks better. This stuff matters to me for some reason. * Yep, updating MANU again. There we go. That's better - From my name to my "design firm". * Update keyboards/412_64/keymaps/default/keymap.c Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
Diffstat (limited to 'keyboards/412_64/rules.mk')
-rw-r--r--keyboards/412_64/rules.mk73
1 files changed, 73 insertions, 0 deletions
diff --git a/keyboards/412_64/rules.mk b/keyboards/412_64/rules.mk
new file mode 100644
index 0000000000..9e74da5d98
--- /dev/null
+++ b/keyboards/412_64/rules.mk
@@ -0,0 +1,73 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_4x16