Merge branch 'newdir'

46 files changed, 2963 insertions, 0 deletions

diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile
new file mode 100644
index 0000000000..26be322e01
--- /dev/null
+++ b/keyboard/hbkb/Makefile
@@ -0,0 +1,56 @@
+# Target file name (without extension).
+TARGET = hbk
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
+	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
+	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hbkb/config.h b/keyboard/hbkb/config.h
new file mode 100644
index 0000000000..5262399dc3
--- /dev/null
+++ b/keyboard/hbkb/config.h
@@ -0,0 +1,52 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xBB00
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         Happy Buckling Keyboard
+#define DESCRIPTION     mod version of IBM Model M keyboard
+
+
+/* matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 8
+/* define if matrix has ghost */
+#define MATRIX_HAS_GHOST
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    10
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_RALT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 128
+#endif
+
+#endif
diff --git a/keyboard/hbkb/controller_teensy.h b/keyboard/hbkb/controller_teensy.h
new file mode 100644
index 0000000000..1b16113654
--- /dev/null
+++ b/keyboard/hbkb/controller_teensy.h
@@ -0,0 +1,27 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef TEENSY_H
+#define TEENSY_H 1
+
+// for Teensy/Teensy++ 2.0
+#undef  DEBUG_LED
+#define DEBUG_LED_CONFIG
+#define DEBUG_LED_ON
+#define DEBUG_LED_OFF
+
+#endif
diff --git a/keyboard/hbkb/keymap.c b/keyboard/hbkb/keymap.c
new file mode 100644
index 0000000000..1de317c9a3
--- /dev/null
+++ b/keyboard/hbkb/keymap.c
@@ -0,0 +1,231 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for Macway mod
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+/*
+ * Layout: 59key
+ * ,-----------------------------------------------------------.
+ * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+ * |-----------------------------------------------------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BS  |
+ * |-----------------------------------------------------------|
+ * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+ * |-----------------------------------------------------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+ * |-----------------------------------------------------------|
+ * |Ctrl |   |Alt  |           Fn4             |Alt  |   |Fn1  |
+ * `-----'   `---------------------------------------'   `-----'
+ *
+ * Matrix: 12x8
+ *    |       0 |       1 |       2 |       3 |       4 |       5 |       6 |       7
+ * ---+---------+---------+---------+---------+---------+---------+---------+---------
+ *  0 |         |         | LCTRL   |         |         |         | RCTRL   |        
+ *  1 |         | LSHIFT  |         |         |         |         | RSHIFT  |        
+ *  2 |         | Tab     | Grave   | 1       | Q       | A       | Z       |        
+ *  3 |         | Cpslck  |         | 2       | W       | S       | X       |        
+ *  4 |         |         |         | 3       | E       | D       | C       |        
+ *  5 | G       | T       | 5       | 4       | R       | F       | V       | B      
+ *  6 |         | Bckspc  |         |         | Key*1   | Bckslsh | Enter   | Space  
+ *  7 | H       | Y       | 6       | 7       | U       | J       | M       | N      
+ *  8 |         | Rbrckt  | Equal   | 8       | I       | K       | Comma   |
+ *  9 |         |         |         | 9       | O       | L       | Dot     |        
+ *  A |         | Lbrckt  | Minus   | 0       | P       | Smcolon |         | Slash  
+ *  B | LALT    |         |         |         |         |         |         | RALT   
+ *  Key*1 This key locates between Equal and Backspace.
+ *
+ *  Original matrix here: http://geekhack.org/showthread.php?7767-Wireless-Model-M&p=133911&viewfull=1#post133911
+ */
+#define KEYMAP( \
+    K22, K23, K33, K43, K53, K52, K72, K73, K83, K93, KA3, KA2, K82, K64, K61, \
+    K21, K24, K34, K44, K54, K51, K71, K74, K84, K94, KA4, KA1, K81, K65, \
+    K31, K25, K35, K45, K55, K50, K70, K75, K85, K95, KA5, KA0, K66, \
+    K11, K26, K36, K46, K56, K57, K77, K76, K86, K96, KA7, K16, \
+    K02, KB0,      K67,      KB7, K06 \
+) { \
+    { KB_NO,    KB_NO,    KB_##K02, KB_NO,    KB_NO,    KB_NO,    KB_##K06, KB_NO    }, \
+    { KB_NO,    KB_##K11, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K16, KB_NO    }, \
+    { KB_NO,    KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO    }, \
+    { KB_NO,    KB_##K31, KB_NO,    KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO    }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_NO,    KB_##K61, KB_NO,    KB_NO,    KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_NO,    KB_##K81, KB_##K82, KB_##K83, KB_##K84, KB_##K85, KB_##K86, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K93, KB_##K94, KB_##K95, KB_##K96, KB_NO    }, \
+    { KB_##KA0, KB_##KA1, KB_##KA2, KB_##KA3, KB_##KA4, KB_##KA5, KB_NO,    KB_##KA7 }, \
+    { KB_##KB0, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##KB7 }, \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    1,              // Fn1
+    2,              // Fn2
+    3,              // Fn3
+    4,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_SLSH,        // Fn2
+    KB_SCLN,        // Fn3
+    KB_SPC,         // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BS  |
+     * |-----------------------------------------------------------|
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |   |Alt  |           Fn4             |Alt  |   |Fn1  |
+     * `-----'   `---------------------------------------'   `-----'
+     */
+    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV, \
+           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC, \
+           LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,ENT, \
+           LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, FN1, \
+           LGUI,     LALT,          FN4,           RALT,     FN1),
+
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|        |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |   |Alt  |           Space           |Alt  |   |Fn1  |
+     * `-----'   `---------------------------------------'   `-----'
+     */ 
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  NO,  NO, \
+           LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,NO, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,FN1, \
+           LGUI,     LALT,          SPC,           RALT,     FN1),
+
+
+    /* Layer 2: Vi mode (Quote/Rmeta)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |   |
+     * |-----------------------------------------------------------|
+     * |  \  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |        |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |   |Alt  |           Space           |Alt  |   |Fn1  |
+     * `-----'   `---------------------------------------'   `-----'
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, NO,  NO, \
+           BSLS,HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  NO, \
+           LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  NO, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT, \
+           LGUI,     LALT,          SPC,           RALT,     NO),
+
+
+
+    /* Layer 3: Mouse mode (Semicolon)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |   |
+     * |-----------------------------------------------------------|
+     * |  \  |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |        |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |Mb1|Mb2|Mb3|Mb2|Mb1|   |   |   |Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |   |Alt  |           Space           |Alt  |   |     |
+     * `-----'   `---------------------------------------'   `-----'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, NO, NO, \
+           BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  NO, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  NO, \
+           LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,NO,  NO,  NO,  RSFT, \
+           LGUI,     LALT,          BTN1,          RALT,     NO),
+
+
+    /* Layer 4: Matias half keyboard style (Space)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|   |   |Tab  |
+     * |-----------------------------------------------------------|
+     * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
+     * |-----------------------------------------------------------|
+     * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |   |Alt  |           Fn4             |Alt  |   |     |
+     * `-----'   `---------------------------------------'   `-----'
+     */
+    KEYMAP(MINS,0,   9,   8,   7,   6,   5,   4,   3,   2,   1,   NO,  NO,  NO, ESC, \
+           BSPC,P,   O,   I,   U,   Y,   T,   R,   E,   W,   Q,   NO,  NO,  TAB, \
+           LCTL,SCLN,L,   K,   J,   H,   G,   F,   D,   S,   A,   RCTL,RCTL, \
+           LSFT,SLSH,DOT, COMM,M,   N,   B,   V,   C,   X,   Z,   RSFT, \
+           LGUI,     LALT,          FN4,           RALT,     NO),
+
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/keyboard/hbkb/led.c b/keyboard/hbkb/led.c
new file mode 100644
index 0000000000..fc0eeb0ff7
--- /dev/null
+++ b/keyboard/hbkb/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/keyboard/hbkb/matrix.c b/keyboard/hbkb/matrix.c
new file mode 100644
index 0000000000..d7c0663642
--- /dev/null
+++ b/keyboard/hbkb/matrix.c
@@ -0,0 +1,270 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+/*
+ * Happy Buckling Keyboard(IBM Model M mod)
+ *
+ * Pin usage:
+ *   COL: PD0-7
+ *   ROW: PB0-7, PF4-7
+ */
+
+#if (MATRIX_COLS > 16)
+#   error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+#   error "MATRIX_ROWS must not exceed 255"
+#endif
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t *matrix_prev;
+static uint16_t _matrix0[MATRIX_ROWS];
+static uint16_t _matrix1[MATRIX_ROWS];
+#endif
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static uint8_t read_col(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    print_enable = true;
+    debug_enable = true;
+    debug_matrix = true;
+    debug_keyboard = false;
+    debug_mouse = false;
+    print("debug enabled.\n");
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+
+    // initialize rows
+    unselect_rows();
+
+    // initialize columns to input with pull-up(DDR:0, PORT:1)
+    DDRD = 0x00;
+    PORTD = 0xFF;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+    matrix = _matrix0;
+    matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+    if (!debouncing) {
+        uint8_t *tmp = matrix_prev;
+        matrix_prev = matrix;
+        matrix = tmp;
+    }
+
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        unselect_rows();
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        if (matrix[i] != (uint8_t)~read_col()) {
+            matrix[i] = (uint8_t)~read_col();
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); print("\n");
+            }
+            _delay_ms(1);   // TODO: work around. HAHAHAHAHAAHA
+            debouncing = DEBOUNCE;
+        }
+    }
+    unselect_rows();
+
+    if (debouncing) {
+        debouncing--;
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix[i] != matrix_prev[i]) {
+            return true;
+        }
+    }
+    return false;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+        pbin_reverse(matrix_get_row(row));
+#else
+        pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+        count += bitpop(matrix[i]);
+#else
+        count += bitpop16(matrix[i]);
+#endif
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+inline
+static uint8_t read_col(void)
+{
+    return PIND;
+}
+
+inline
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRB  &= ~0b11111111;
+    PORTB &= ~0b11111111;
+    DDRF  &= ~0b11110000;
+    PORTF &= ~0b11110000;
+}
+
+inline
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+        case 1:
+        case 2:
+        case 3:
+        case 4:
+        case 5:
+        case 6:
+        case 7:
+            DDRB  |=  (1<<row);
+            PORTB &= ~(1<<row);
+            break;
+        case 8:
+            DDRF  |=  (1<<4);
+            PORTF &= ~(1<<4);
+            break;
+        case 9:
+        case 10:
+        case 11:
+            DDRF  |=  (1<<(row-4));
+            PORTF &= ~(1<<(row-4));
+            break;
+    }
+}
diff --git a/keyboard/hhkb/Makefile.iwrap b/keyboard/hhkb/Makefile.iwrap
new file mode 100644
index 0000000000..ef7ad2eac2
--- /dev/null
+++ b/keyboard/hhkb/Makefile.iwrap
@@ -0,0 +1,93 @@
+#
+# Makefile for iWRAP
+#
+
+
+# Target file name (without extension).
+TARGET = hhkb_iwrap
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config_iwrap.h
+
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega168p
+# avrdude doesn't know atmega168p
+AVRDUDE_MCU = atmega168
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 12000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+
+# Search Path
+VPATH = $(TARGET_DIR)
+
+include $(TOP_DIR)/protocol/iwrap.mk
+# To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
+include $(TOP_DIR)/protocol/vusb.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
new file mode 100644
index 0000000000..f6d133eae4
--- /dev/null
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -0,0 +1,60 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = hhkb_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+#MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH = $(TARGET_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.vusb b/keyboard/hhkb/Makefile.vusb
new file mode 100644
index 0000000000..6dd6288077
--- /dev/null
+++ b/keyboard/hhkb/Makefile.vusb
@@ -0,0 +1,91 @@
+#
+# Makefile for V-USB
+#
+
+
+# Target file name (without extension).
+TARGET = hhkb_vusb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config_vusb.h
+
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega328p
+# avrdude doesn't know atmega168p
+AVRDUDE_MCU = $(MCU)
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 12000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+
+# Search Path
+VPATH = $(TARGET_DIR)
+
+include $(TOP_DIR)/protocol/vusb.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/README b/keyboard/hhkb/README
new file mode 100644
index 0000000000..65f7dcab5a
--- /dev/null
+++ b/keyboard/hhkb/README
@@ -0,0 +1,151 @@
+Alternative Controller for HHKB
+===============================
+
+Feature
+-------
+- Mouse Keys
+- NKRO on USB(PJRC Tennsy only)
+- Keymap Layers
+
+
+Customize Keymap
+----------------
+see keymap.c.
+
+
+
+Build
+=====
+PJRC Teensy
+-----------
+0. Edit matrix.c.
+    adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
+1. Define macros in config_pjrc.h.(Optional)
+    VENDOR_ID, PRODUCT_ID and string descriptor.
+    IS_COMMAND
+2. Edit Makefile for MCU setting and build options.
+    MCU, F_CPU
+    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE
+3. Build hex file.
+    $ make -f Makefile.pjrc
+4. Program MCU.
+    $  make -f Makefile.pjrc program
+
+
+V-USB
+-----
+0. Edit matrix.c and usbconfig.h.
+    adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
+    define macros for V-USB in usbconfig.h.
+1. Define macros in config_vusb.h.(Optional)
+    IS_COMMAND
+2. Edit Makefile.vusb for MCU setting and build options.
+    MCU, F_CPU
+    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
+3. Build hex file.
+    $ make -f Makefile.vusb
+4. Program MCU.
+    $  make -f Makefile.vusb program
+
+    Using a bootloader to program for convenience is recommended.
+    Once program this V-USB bootloader at first, you can program MCU without
+    extra programmer. You should have reset switch to start up as bootloader
+    mode in this case.
+    USBaspLoader:
+    http://www.obdev.at/products/vusb/usbasploader.html
+
+
+iWRAP
+-----
+0. Edit matrix.c and usbconfig.h.
+    adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
+    define macros for V-USB in usbconfig.h.
+1. Define macros in config_iwrap.h.(Optional)
+    IS_COMMAND
+2. Edit Makefile.iwrap for MCU setting and build options.
+    MCU, F_CPU
+    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
+3. Build hex file.
+    $ make -f Makefile.iwrap
+4. Program MCU.
+    $  make -f Makefile.iwrap program
+
+
+
+Hardware
+========
+PJRC Teensy
+-----------
+                        +---------------+
+                        |   Teensy++    |
+                        |               |
+                        |               |        HHKB
+                        |               |        ~~~~
+                        |          PB0-2|------->ROW(6-8)
+                        |          PB3-5|------->COL(9-11)
+                        |            PB6|------->ENABLE(12)
+                        |            PE6|<-------KEY(4)
+                        |            PE7|------->PREV(5)
+                        |               |
+                        |               |
+                        |               |
+                        +---------------+
+
+
+V-USB
+-----
+                +---+   +---------------+
+USB            GND  |   |   ATmega168   |
+~~~                 C3  |               |
+5V <-------+--------+---|Vcc,AVCC       |        HHKB
+           R1           |               |        ~~~~
+D- <----+--+-----R2-----|INT1      PB2-4|------->ROW(6-8)
+D+ <----|---+----R3-----|INT0      PC0-2|------->COL(9-11)
+        Z1  Z2          |            PC3|------->ENABLE(12)
+GND<----+---+-----------|GND         PB0|<-------KEY(4)
+                        |            PB1|------->PREV(5)
+                        |               |
+            GND+-C2--+--|XTAL1       RXD|------->Debug Console
+                     X1 |            TXD|<-------Debug Console
+            GND+-C3--+--|XTAL2       RST|---SW--+GND
+                        +---------------+
+R1:     1.5K Ohm
+R2,R3:  68 Ohm
+Z1,Z2:  Zener 3.6V
+C1,C2:  22pF
+C3:     0.1uF
+X1:     Crystal 20MHz(16MHz/12MHz)
+SW:     Push Switch(Optional for bootloader)
+
+
+iWRAP
+-----
+                        +---------------+        WT12
+              5V        |   ATmega168   | 5V/3.3V~~~~
+              +-----+---|Vcc,AVCC    PC4|---/--->iWRAP(RxD)
+USB           |     C3  |            PC5|<--/----iWRAP(TxD)
+~~~           |     +   |               | 
+5V <--BATT    +    GND  |               |        HHKB
+              R1        |               |        ~~~~
+D- <----+-----+--R2-----|INT1      PB2-4|------->ROW(6-8)
+D+ <----|---+----R3-----|INT0      PC0-2|------->COL(9-11)
+        Z1  Z2          |            PC3|------->ENABLE(12)
+GND<----+---+-----------|GND         PB0|<-------KEY(4)
+                        |            PB1|------->PREV(5)
+                        |               |
+            GND+-C2--+--|XTAL1       RXD|------->Debug Console
+                     X1 |            TXD|<-------Debug Console
+            GND+-C3--+--|XTAL2       RST|---SW--+GND
+                        +---------------+
+
+R1:     1.5K Ohm
+R2,R3:  68 Ohm
+Z1,Z2:  Zener 3.6V
+C1,C2:  22pF
+C3:     0.1uF
+X1:     Crystal 12MHz
+SW:     Push Switch(Optional)
+BATT:   Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
+
+
+EOF
diff --git a/keyboard/hhkb/config_iwrap.h b/keyboard/hhkb/config_iwrap.h
new file mode 100644
index 0000000000..80ab64398b
--- /dev/null
+++ b/keyboard/hhkb/config_iwrap.h
@@ -0,0 +1,55 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xBEEA
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         HHKB mod
+#define DESCRIPTION     t.m.k. keyboard firmware for HHKB mod
+
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) 
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+/* pins for Software UART */
+#define SUART_IN_PIN    PINC
+#define SUART_IN_BIT    5
+#define SUART_OUT_PORT  PORTC
+#define SUART_OUT_BIT   4
+
+
+#define DEBUG_LED 1
+#define DEBUG_LED_CONFIG    (DDRD |= (1<<4))
+#define DEBUG_LED_OFF       (PORTD |= (1<<4))
+#define DEBUG_LED_ON        (PORTD &= ~(1<<4))
+
+#endif
diff --git a/keyboard/hhkb/config_pjrc.h b/keyboard/hhkb/config_pjrc.h
new file mode 100644
index 0000000000..fffe3522c7
--- /dev/null
+++ b/keyboard/hhkb/config_pjrc.h
@@ -0,0 +1,62 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCAFE
+#define DEVICE_VER      0x0101
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         HHKB mod
+#define DESCRIPTION     t.m.k. keyboard firmware for HHKB mod
+
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) 
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* PS/2 mouse */
+#ifdef PS2_MOUSE_ENABLE
+/*
+#   define PS2_CLOCK_PORT  PORTF
+#   define PS2_CLOCK_PIN   PINF
+#   define PS2_CLOCK_DDR   DDRF
+#   define PS2_CLOCK_BIT   0
+#   define PS2_DATA_PORT   PORTF
+#   define PS2_DATA_PIN    PINF
+#   define PS2_DATA_DDR    DDRF
+#   define PS2_DATA_BIT    1
+*/
+#endif
+
+#endif
diff --git a/keyboard/hhkb/config_vusb.h b/keyboard/hhkb/config_vusb.h
new file mode 100644
index 0000000000..268644849e
--- /dev/null
+++ b/keyboard/hhkb/config_vusb.h
@@ -0,0 +1,49 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xC0FE
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         HHKB mod
+#define DESCRIPTION     t.m.k. keyboard firmware for HHKB mod
+
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) 
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+#define DEBUG_LED 1
+#define DEBUG_LED_CONFIG    (DDRD |= (1<<4))
+#define DEBUG_LED_OFF       (PORTD |= (1<<4))
+#define DEBUG_LED_ON        (PORTD &= ~(1<<4))
+
+#endif
diff --git a/keyboard/hhkb/doc/Bluetooth.txt b/keyboard/hhkb/doc/Bluetooth.txt
new file mode 100644
index 0000000000..b27f197006
--- /dev/null
+++ b/keyboard/hhkb/doc/Bluetooth.txt
@@ -0,0 +1,4 @@
+HHKB Bluetooth mod
+==================
+See this article:
+http://geekhack.org/showwiki.php?title=Island:20851
diff --git a/keyboard/hhkb/doc/Bluetooth_img/.picasa.ini b/keyboard/hhkb/doc/Bluetooth_img/.picasa.ini
new file mode 100755
index 0000000000..f6a4f60674
--- /dev/null
+++ b/keyboard/hhkb/doc/Bluetooth_img/.picasa.ini
@@ -0,0 +1,2 @@
+[Picasa]

+name=Bluetooth_img

diff --git a/keyboard/hhkb/doc/Bluetooth_img/BT_circuit.jpg b/keyboard/hhkb/doc/Bluetooth_img/BT_circuit.jpg
new file mode 100644
index 0000000000..2e5a25e81e
--- /dev/null
+++ b/keyboard/hhkb/doc/Bluetooth_img/BT_circuit.jpg
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
new file mode 100644
index 0000000000..ace931de38
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -0,0 +1,199 @@
+Alternative Controller for HHKB pro
+===================================
+I want to add vi cursor and mouse keys to HHKB. Original HHKB controller is not programmable and
+firmware source code is not open. So, customizing HHKB needs to replace original controller with programmable one.
+I used Teensy++ as alternative controller. Though a Teensy has enough ports to drive HHKB,
+Teensy++ has clean pinout and it makes programing and wiring easier.
+
+This is just a proof of concept for replacing controller of HHKB, not a complete firmware.
+
+My prototype firmware source tree is here:
+    github(http://github.com/tmk/tmk_keyboard)
+This firmware is a port of my previous project:
+    HHKB style Mod(http://geekhack.org/showwiki.php?title=Island:11930)
+PJRC:
+    Teensy++/Teensy(http://www.pjrc.com/teensy/)
+
+
+Pros:
+    * without pattern cutting, case mod  and soldering
+    * can keep original controller intact
+    * can change HHKB behaviour as you like(by C programming)
+
+Cons:
+    * void your warranty
+    * unavailability of Teensy++/Teensy(because of PS3 cracking boom?)
+
+Features:
+    * customized keymap
+    * more keymap layers
+    * mouse keys for minimum mouse operation(never comfortable for normal use)
+    * and more...(in the future)
+
+Any suggestions or ideas are welcome.
+
+
+NOTE:
+    My HHKB is just "Professional". This means followings may not be applied to "Professional2".
+
+DISCLAIMER:
+    I'm not a professional for electronics and MCU programming. This may damage your HHKB.
+    And my English writing is poor, I'm not sure I can convey my notions accurately.
+
+
+Teensy++ installation
+---------------------
+Angled USB mini B adapter is used to install Teensy++ laterally.
+(teensy_install.jpg)
+
+Bread baord wires are used to connect Teensy++.
+(teensy_wiring.jpg)
+(connector_contact.jpg)
+
+
+HHKB internal
+-------------
+HHKB pro has some chips on separate two PCBs.
+
+Controller PCB:
+    M38K07M4    Renesas MCU with USB function
+                http://documentation.renesas.com/eng/products/mpumcu/rej03b0192_38k0ds.pdf
+
+    (HHKB_controller.jpg)
+
+Keyswitch PCB:
+    HC4051      Analog Multiplexer: select a row line.
+                http://www.alldatasheet.com/datasheet-pdf/pdf/203989/KODENSHI/KK74HC4051A.html
+    LS145       BCD Decoder: select a column line.
+                http://www.alldatasheet.com/datasheet-pdf/pdf/27373/TI/SN74LS145D.html
+    BU9831      Non-volatile electronic potentiometer: for calibration?
+                http://www.alldatasheet.com/datasheet-pdf/pdf/36387/ROHM/BU9831.html
+    TP1683/4    Capacitive Sensing controller: no datasheet available.
+
+    (HHKB_keyswitch.jpg)
+
+    Topre original chip?
+    (HHKB_TP1684.jpg)
+
+
+Two PCBs are connected by 15 lines. Vcc and GND use 3 lines each, other 9 lines are for keyboard signaling.
+
+    Keyswitch PCB connector                                 Teensy++ pins
+    -------------------------------------------------------------------------------
+     1  Vcc(5V)                                             5V
+     2  Vcc(5V)
+     3  Vcc(5V)
+     4  TP1684    KEY: Low(0) when key pressed              PE6 input(with pullup)
+     5  TP1684    KEY_PREV: assert previous key state???    PE7 output
+     6  HC4051    A(bit0) select 8 rows(0 to 7)             PB0 output
+     7  HC4051    B(bit1)                                   PB1 output
+     8  HC4051    C(bit2)                                   PB2 output
+     9  LS145     A(bit0) select 8 columns(0 to 7)          PB3 output
+    10  LS145     B(bit1)                                   PB4 output
+    11  LS145     C(bit2)                                   PB5 output
+    12  LS145     D(enable) Low(0) enable selected column   PB6 output
+    13  GND
+    14  GND
+    15  GND                                                 GND
+
+    (HHKB_connector.jpg)
+
+
+Keyswitch matrix
+----------------
+60 keyswitches in 8*8 matrix. It is ghost-free and bounce-free.
+
+  COL 0     1       2       3       4       5       6       7
+ROW ---------------------------------------------------------------
+  0|  2     q       w       s       a       z       x       c
+  1|  3     4       r       e       d       f       v       b
+  2|  5     6       y       t       g       h       n       _NONE_
+  3|  1     Esc     Tab     Control LShift  LAlt    LMeta   Space
+  4|  7     8       u       i       k       j       m       _NONE_
+  5|  \     `       Delete  Return  Fn      RShift  RAlt    RMeta
+  6|  9     0       o       p       ;       l       ,       _NONE_
+  7|  -     +       ]       [       '       /       .       _NONE_
+
+
+Matrix diagram:
+             +-------------------------+-+-+-+-+-+-+-+     Vcc
+             |bias control?            - - - - - - - -     ---
+             |                  3.9K*8 R R R R R R R R      |
+    +--------^+      +--------+        - - - - - - - -      |  
+    |        2|      | HC4051 <0-------|-|-|-|-|-|-|-|--|R|-+
+    |         |capa. |        <1-------|-|-|-|-|-|-|-|--|R|-+
+    | TP1684  |sense |        <2-------|-|-|-|-|-|-|-|--|R|-+
+    |       11<------|        <3-------|-|-|-|-|-|-|-|--|R|-+
+    |         |      |        <4-------|-|-|-|-|-|-|-|--|R|-+
+    |         |      |        <5-------|-|-|-|-|-|-|-|--|R|-+
+    |         <-+    |        <6-------|-|-|-|-|-|-|-|--|R|-+
+    |   1   4 | |    |        <7-------|-|-|-|-|-|-|-|--|R|-+
+    +---V---^-+ |    +-^-^-^--+        0 1 2 3 4 5 6 7  33K*8
+       KEY PREV |      A B C         +-----------------+
+        |   | +-^----+ | | |         |      LS145      |
+    Vcc |   | |BU9831| | | |         +-^--^--^--^------+
+    --- |   | +------+ | | |           A  B  C  D   +------+
+     |  |   |          | | |           |  |  |  |   |      |
+    1-3 4   5          6 7 8           9 10 11 12 13-15    |
+    +--------------------------------------------------+   |
+    |                connector                         |  ---
+    +--------------------------------------------------+  GND
+                    to controller
+                                    
+
+Signals charts:
+    While pressing space bar, watched HHKB original controller signals by logic analyzer.
+    Row and column is looping between 0-7 each for selecting a key.
+    A key is scaned every about 15ms, so scan rate is 66Hz.
+
+    (HHKB_chart1.jpg)
+
+    Space bar locate at ROW:3 COL:7. A key is selected by HC4051(C,B,A) and LS145(C,B,A).
+    Key state can be read on TP1684(4/KEY) while asserting low on LS145(D). 
+
+    Usage of TP1684(5) is not clear. Controller seemed to output previous key state on this line.
+    However key state can be read without using this signal.
+
+    (HHKB_chart2.jpg)
+
+
+Matrix scan pseudo code:
+    for (row: 0-7) {
+        SELECT_ROW(row);        // set HC4051(A,B,C)
+
+        for (col: 0-7) {
+            SELECT_COL(col);    // set LS145(A,B,C)
+
+            _delay_us(40);
+
+            if (prev_key_state(row, col)) {
+                KEY_PREV_ON;
+            }
+
+            _delay_us(7);
+
+            ENALBLE_COL();      // set LS145(D) to low
+
+            _delay_us(10);
+
+            if (KEY == 0) {     // read TP1684(KEY)
+                // key pressed
+            } else {
+                // not pressed
+            }
+
+            KEY_PREV_OFF;
+            UNALBLE_COL();      // set LS145(D) to high
+
+            _delay_us(150);
+        }
+    }
+
+
+Keymap layers
+-------------
+Followings are added layers with additional Fn keys.
+
+see keymap.c
+
+EOF
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_TP1684.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_TP1684.jpg
new file mode 100644
index 0000000000..0a03164094
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_TP1684.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_chart1.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_chart1.jpg
new file mode 100644
index 0000000000..1f09bd185c
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_chart1.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_chart2.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_chart2.jpg
new file mode 100644
index 0000000000..45f5ada905
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_chart2.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_connector.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_connector.jpg
new file mode 100644
index 0000000000..e8a09e9b28
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_connector.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_controller.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_controller.jpg
new file mode 100644
index 0000000000..e3dae8e86c
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_controller.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg b/keyboard/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg
new file mode 100644
index 0000000000..3afc269e7b
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/HHKB_keyswitch.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/connector_contact.jpg b/keyboard/hhkb/doc/HHKB_img/connector_contact.jpg
new file mode 100644
index 0000000000..5304bc8d7e
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/connector_contact.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/logic_analyzer.jpg b/keyboard/hhkb/doc/HHKB_img/logic_analyzer.jpg
new file mode 100644
index 0000000000..f1b438ae77
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/logic_analyzer.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/probe_contact.jpg b/keyboard/hhkb/doc/HHKB_img/probe_contact.jpg
new file mode 100644
index 0000000000..dc79afa0cc
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/probe_contact.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/teensy_install.jpg b/keyboard/hhkb/doc/HHKB_img/teensy_install.jpg
new file mode 100644
index 0000000000..873d988edb
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/teensy_install.jpg
diff --git a/keyboard/hhkb/doc/HHKB_img/teensy_wiring.jpg b/keyboard/hhkb/doc/HHKB_img/teensy_wiring.jpg
new file mode 100644
index 0000000000..1c4eb67434
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_img/teensy_wiring.jpg
diff --git a/keyboard/hhkb/keymap.c b/keyboard/hhkb/keymap.c
new file mode 100644
index 0000000000..85a7c31b7e
--- /dev/null
+++ b/keyboard/hhkb/keymap.c
@@ -0,0 +1,221 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for PFU HHKB Pro
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "host.h"
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+    K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
+    K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
+    K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
+    K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
+         K35, K36,           K37,                K57, K56 \
+) \
+{ \
+    { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO    }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO    }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_NO    }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO    } \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    1,              // Fn1
+    2,              // Fn2
+    3,              // Fn3
+    3,              // Fn4
+    4,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_SLSH,        // Fn2
+    KB_SCLN,        // Fn3
+    KB_NO,          // Fn4
+    KB_SPC,         // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift |Fn1|
+     * `-----------------------------------------------------------'
+     *       |Gui|Alt  |Fn5                    |Alt  |Fn4|
+     *       `-------------------------------------------'
+     */
+    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV, \
+           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC, \
+           LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,ENT, \
+           LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT,FN1, \
+                LGUI,LALT,          FN5,                RALT,FN4),
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift |xxx|
+     * `-----------------------------------------------------------'
+     *      |Gui |Alt  |Space                  |Alt  |xxx|
+     *      `--------------------------------------------'
+     */ 
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  NO,  BSPC, \
+           LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
+                LGUI,LALT,          SPC,                RALT,FN7),
+
+    /* Layer 2: Vi mode (Slash)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd|   |   |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgUlEnd|xxx|Shift |   |
+     * `-----------------------------------------------------------'
+     *       |Gui|Alt  |Space                  |Alt  |Gui|
+     *       `-------------------------------------------'
+     */
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           TAB, HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  BSPC, \
+           LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  ENT, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
+                LGUI,LALT,          SPC,                RALT,RGUI),
+
+    /* Layer 3: Mouse mode (Semicolon)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |MwL|MwU|McU|MwD|MwR|MwL|MwD|MwU|MwR|   |   |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |Mb4|Mb5|Mb1|Mb2|Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * `-----------------------------------------------------------'
+     *      |Gui |Alt  |Mb1                    |Alt  |Gui|
+     *      `--------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+     */
+#ifdef HOST_IWRAP
+// iWRAP does not support mouse wheel, use these keycodes to remap as wheel
+#define KB_KPPL KB_KP_PLUS
+#define KB_KPMI KB_KP_MINUS
+#define KB_KPAS KB_KP_ASTERISK
+#define KB_KPSL KB_KP_SLASH
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           TAB, KPAS,KPPL,MS_U,KPMI,KPSL,KPAS,KPPL,KPMI,KPSL,NO,  NO,  NO,  BSPC, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  ENT, \
+           LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,NO,  NO,  NO,  RSFT,NO, \
+                LGUI,LALT,          BTN1,               RALT,FN4),
+#else
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           TAB, WH_L,WH_U,MS_U,WH_D,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  BSPC, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  ENT, \
+           LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO,  RSFT,NO, \
+                LGUI,LALT,          BTN1,               RALT,FN4),
+#endif
+
+    /* Layer 4: Matias half keyboard style (Space)
+     * ,-----------------------------------------------------------.
+     * |  -|  0|  9|  8|  7|  6|  5|  4|  3|  2|  1|   |   |   |Esc|
+     * |-----------------------------------------------------------|
+     * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|   |   |Tab  |
+     * |-----------------------------------------------------------|
+     * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
+     * |-----------------------------------------------------------|
+     * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift |   |
+     * `-----------------------------------------------------------'
+     *      |Gui |Alt  |xxxxxxxxxxxxxxxxxxxxxxx|Alt  |Gui|
+     *      `--------------------------------------------'
+     */
+/*
+    KEYMAP(MINS,0,   9,   8,   7,   6,   5,   4,   3,   2,   1,   NO,  NO,  NO,  ESC, \
+           BSPC,P,   O,   I,   U,   Y,   T,   R,   E,   W,   Q,   NO,  NO,  TAB, \
+           LCTL,SCLN,L,   K,   J,   H,   G,   F,   D,   S,   A,   RCTL,RCTL, \
+           LSFT,SLSH,DOT, COMM,M,   N,   B,   V,   C,   X,   Z,   RSFT,NO, \
+                LGUI,LALT,          FN5,                RALT,RGUI)
+*/
+    /* Mouse mode (Space) */
+#ifdef HOST_IWRAP
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           TAB, KPAS,KPPL,MS_U,KPMI,KPSL,KPAS,KPPL,KPMI,KPSL,NO,  NO,  NO,  BSPC, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  ENT, \
+           LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO,  RSFT,NO, \
+                LGUI,LALT,          FN5,                RALT,RGUI),
+#else
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
+           TAB, WH_L,WH_U,MS_U,WH_D,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  BSPC, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  ENT, \
+           LSFT,BTN4,BTN5,BTN1,BTN2,BTN3,BTN2,BTN1,BTN4,BTN5,NO,  RSFT,NO, \
+                LGUI,LALT,          FN5,                RALT,RGUI),
+#endif
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/keyboard/hhkb/led.c b/keyboard/hhkb/led.c
new file mode 100644
index 0000000000..669b6107fa
--- /dev/null
+++ b/keyboard/hhkb/led.c
@@ -0,0 +1,26 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+/* HHKB has no LEDs */
+void led_set(uint8_t usb_led)
+{
+}
+
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
new file mode 100644
index 0000000000..350066b904
--- /dev/null
+++ b/keyboard/hhkb/matrix.c
@@ -0,0 +1,294 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "timer.h"
+#include "matrix.h"
+
+
+// Timer resolution check
+#if (1000000/TIMER_RAW_FREQ > 20)
+#   error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
+#endif
+
+#if (MATRIX_COLS > 16)
+#   error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+#   error "MATRIX_ROWS must not exceed 255"
+#endif
+
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t *matrix_prev;
+static uint16_t _matrix0[MATRIX_ROWS];
+static uint16_t _matrix1[MATRIX_ROWS];
+#endif
+
+// HHKB has no ghost and no bounce.
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+// Matrix I/O ports
+//
+// row:     HC4051[A,B,C]  selects scan row0-7
+// col:     LS145[A,B,C,D] selects scan col0-7 and enable(D)
+// key:     on: 0/off: 1
+// prev:    unknown: output previous key state(negated)?
+
+#ifdef HOST_PJRC
+// Ports for Teensy
+// row:     PB0-2
+// col:     PB3-5,6
+// key:     PE6(pull-uped)
+// prev:    PE7
+#define KEY_INIT()              do {    \
+    DDRB |= 0x7F;                       \
+    DDRE |=  (1<<7);                    \
+    DDRE &= ~(1<<6);                    \
+    PORTE |= (1<<6);                    \
+} while (0)
+#define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
+                                         (((COL) & 0x07)<<3) |    \
+                                         ((ROW) & 0x07))
+#define KEY_ENABLE()            (PORTB &= ~(1<<6))
+#define KEY_UNABLE()            (PORTB |=  (1<<6))
+#define KEY_STATE()             (PINE & (1<<6))
+#define KEY_PREV_ON()           (PORTE |=  (1<<7))
+#define KEY_PREV_OFF()          (PORTE &= ~(1<<7))
+#define KEY_POWER_ON()
+#define KEY_POWER_OFF()
+#else
+// Ports for V-USB
+// key:     PB0(pull-uped)
+// prev:    PB1
+// row:     PB2-4
+// col:     PC0-2,3
+// power:   PB5(Low:on/Hi-z:off)
+#define KEY_INIT()              do {    \
+    DDRB  |= 0x3E;                      \
+    DDRB  &= ~(1<<0);                   \
+    PORTB |= 1<<0;                      \
+    DDRC  |= 0x0F;                      \
+    KEY_UNABLE();                       \
+    KEY_PREV_OFF();                     \
+} while (0)
+#define KEY_SELECT(ROW, COL)    do {    \
+    PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
+    PORTC = (PORTC & 0xF8) | ((COL) & 0x07);    \
+} while (0)
+#define KEY_ENABLE()            (PORTC &= ~(1<<3))
+#define KEY_UNABLE()            (PORTC |=  (1<<3))
+#define KEY_STATE()             (PINB & (1<<0))
+#define KEY_PREV_ON()           (PORTB |=  (1<<1))
+#define KEY_PREV_OFF()          (PORTB &= ~(1<<1))
+// Power supply switching
+#define KEY_POWER_ON()          do {    \
+    KEY_INIT();                         \
+    PORTB &= ~(1<<5);                   \
+    _delay_us(200);                     \
+} while (0)
+#define KEY_POWER_OFF()         do {    \
+    DDRB  &= ~0x3F;                     \
+    PORTB &= ~0x3F;                     \
+    DDRC  &= ~0x0F;                     \
+    PORTC &= ~0x0F;                     \
+} while (0)
+#endif
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    KEY_INIT();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+    matrix = _matrix0;
+    matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint8_t *tmp;
+
+    tmp = matrix_prev;
+    matrix_prev = matrix;
+    matrix = tmp;
+
+    KEY_POWER_ON();
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            KEY_SELECT(row, col);
+            _delay_us(40);
+
+            // Not sure this is needed. This just emulates HHKB controller's behaviour.
+            if (matrix_prev[row] & (1<<col)) {
+                KEY_PREV_ON();
+            }
+            _delay_us(7);
+
+            // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
+            // If V-USB interrupts in this section we could lose 40us or so
+            // and would read invalid value from KEY_STATE.
+            uint8_t last = TIMER_RAW;
+
+            KEY_ENABLE();
+            // Wait for KEY_STATE outputs its value.
+            // 1us was ok on one HHKB, but not worked on another.
+            _delay_us(10);
+            if (KEY_STATE()) {
+                matrix[row] &= ~(1<<col);
+            } else {
+                matrix[row] |= (1<<col);
+            }
+
+            // Ignore if this code region execution time elapses more than 20us.
+            if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
+                matrix[row] = matrix_prev[row];
+            }
+
+            KEY_PREV_OFF();
+            KEY_UNABLE();
+            // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
+            // This takes 25us or more to make sure KEY_STATE returns to idle state.
+            _delay_us(150);
+        }
+    }
+    KEY_POWER_OFF();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix[i] != matrix_prev[i])
+            return true;
+    }
+    return false;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+#if (MATRIX_COLS <= 8)
+    print("\nr/c 01234567\n");
+#else
+    print("\nr/c 0123456789ABCDEF\n");
+#endif
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+        pbin_reverse(matrix_get_row(row));
+#else
+        pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+        count += bitpop(matrix[i]);
+#else
+        count += bitpop16(matrix[i]);
+#endif
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
diff --git a/keyboard/hhkb/usbconfig.h b/keyboard/hhkb/usbconfig.h
new file mode 100644
index 0000000000..c3aad34bef
--- /dev/null
+++ b/keyboard/hhkb/usbconfig.h
@@ -0,0 +1,388 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config_vusb.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      10
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x01
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     't', '.', 'm', '.', 'k', '.'
+#define USB_CFG_VENDOR_NAME_LEN 6
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'H', 'H', 'K', 'B', ' ', 'm', 'o', 'd'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */
diff --git a/keyboard/macway/Makefile b/keyboard/macway/Makefile
new file mode 100644
index 0000000000..afee38b120
--- /dev/null
+++ b/keyboard/macway/Makefile
@@ -0,0 +1,53 @@
+# Target file name (without extension).
+TARGET = macway
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/macway/config.h b/keyboard/macway/config.h
new file mode 100644
index 0000000000..2e68bf252f
--- /dev/null
+++ b/keyboard/macway/config.h
@@ -0,0 +1,65 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xBEE0
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         Macway mod
+#define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
+
+
+/* matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 8
+/* define if matrix has ghost */
+#define MATRIX_HAS_GHOST
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    5
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* PS/2 mouse */
+#ifdef PS2_MOUSE_ENABLE
+#   define PS2_CLOCK_PORT  PORTF
+#   define PS2_CLOCK_PIN   PINF
+#   define PS2_CLOCK_DDR   DDRF
+#   define PS2_CLOCK_BIT   0
+#   define PS2_DATA_PORT   PORTF
+#   define PS2_DATA_PIN    PINF
+#   define PS2_DATA_DDR    DDRF
+#   define PS2_DATA_BIT    1
+#endif
+
+#endif
diff --git a/keyboard/macway/doc/back.jpg b/keyboard/macway/doc/back.jpg
new file mode 100644
index 0000000000..0774401f69
--- /dev/null
+++ b/keyboard/macway/doc/back.jpg
diff --git a/keyboard/macway/doc/case.jpg b/keyboard/macway/doc/case.jpg
new file mode 100644
index 0000000000..c776d5e054
--- /dev/null
+++ b/keyboard/macway/doc/case.jpg
diff --git a/keyboard/macway/doc/keys.jpg b/keyboard/macway/doc/keys.jpg
new file mode 100644
index 0000000000..f340ebe8e4
--- /dev/null
+++ b/keyboard/macway/doc/keys.jpg
diff --git a/keyboard/macway/doc/side.jpg b/keyboard/macway/doc/side.jpg
new file mode 100644
index 0000000000..bdf8268f25
--- /dev/null
+++ b/keyboard/macway/doc/side.jpg
diff --git a/keyboard/macway/doc/switch.jpg b/keyboard/macway/doc/switch.jpg
new file mode 100644
index 0000000000..a1500d707d
--- /dev/null
+++ b/keyboard/macway/doc/switch.jpg
diff --git a/keyboard/macway/doc/teensy.jpg b/keyboard/macway/doc/teensy.jpg
new file mode 100644
index 0000000000..07207475d5
--- /dev/null
+++ b/keyboard/macway/doc/teensy.jpg
diff --git a/keyboard/macway/doc/wiring.jpg b/keyboard/macway/doc/wiring.jpg
new file mode 100644
index 0000000000..0f3490f105
--- /dev/null
+++ b/keyboard/macway/doc/wiring.jpg
diff --git a/keyboard/macway/doc/withHHKB.jpg b/keyboard/macway/doc/withHHKB.jpg
new file mode 100644
index 0000000000..9921856e7b
--- /dev/null
+++ b/keyboard/macway/doc/withHHKB.jpg
diff --git a/keyboard/macway/doc/withThinkPad.jpg b/keyboard/macway/doc/withThinkPad.jpg
new file mode 100644
index 0000000000..231c61d036
--- /dev/null
+++ b/keyboard/macway/doc/withThinkPad.jpg
diff --git a/keyboard/macway/keymap.c b/keyboard/macway/keymap.c
new file mode 100644
index 0000000000..ae9f595fce
--- /dev/null
+++ b/keyboard/macway/keymap.c
@@ -0,0 +1,195 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for Macway mod
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+    K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \
+    K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, \
+    K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \
+    K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \
+    K75, K22, K00, K07, K21, K04, K37, K27, K17 \
+) { \
+    { KB_##K00, KB_NO,    KB_##K02, KB_NO,    KB_##K04, KB_NO,    KB_##K06, KB_##K07 }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_NO,    KB_##K26, KB_##K27 }, \
+    { KB_##K30, KB_NO,    KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_NO,    KB_##K66, KB_##K67 }, \
+    { KB_##K70, KB_NO,    KB_NO,    KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO    }, \
+    { KB_##K80, KB_##K81, KB_##K82, KB_##K83, KB_##K84, KB_##K85, KB_NO,    KB_##K87 } \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    1,              // Fn1
+    2,              // Fn2
+    3,              // Fn3
+    4,              // Fn4
+    0,              // Fn5
+    2,              // Fn6
+    3               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_SLSH,        // Fn2
+    KB_SCLN,        // Fn3
+    KB_SPC,         // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     |
+     * |-----------------------------------------------------'     |
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn1|
+     * |-----------------------------------------------------------|
+     * |Fn7|Gui |Alt  |Fn4                   |Alt  |Gui|Fn6|Fn6|Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC, \
+           LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,ENT, \
+           LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT,FN1, \
+           FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL),
+
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift |xxx|
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |                      |Alt  |Gui|   |   |Ctr|
+     * `-----------------------------------------------------------'
+     */ 
+    KEYMAP(ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+           CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  NO, \
+           LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
+           NO,  LGUI,LALT,SPC, RALT,NO,  NO,  NO,  RCTL),
+
+
+    /* Layer 2: Vi mode (Quote/Rmeta)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
+     * |-----------------------------------------------------------|
+     * |  \  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |   \    |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift |   |
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |Space                 |Alt  |Gui|Fn6|Fn6|Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+           BSLS,HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO, \
+           LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  BSLS, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
+           NO,  LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL),
+
+
+    /* Layer 3: Mouse mode (Semicolon)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
+     * |-----------------------------------------------------------|
+     * |  \  |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR|   |   |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |   \    |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |Mb1|Mb2|Mb3|Mb2|Mb1|   |   |   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |xxx|Gui |Alt  |Mb1                   |Alt  |   |   |   |   |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+           BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO, \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  BSLS, \
+           LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,NO,  NO,  NO,  RSFT,NO, \
+           FN7, LGUI,LALT,BTN1,RALT,NO,  NO,  NO,  NO),
+
+
+    /* Layer 4: Matias half keyboard style (Space)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|Tab|Tab|     |
+     * |-----------------------------------------------------'     |
+     * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
+     * |-----------------------------------------------------------|
+     * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift |   |
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |xxxxxxxxxxxxxxxxxxxxxx|Alt  |Gui|   |   |Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(MINS,0,   9,   8,   7,   6,   5,   4,   3,   2,   1,   NO,  NO,  ESC, \
+           BSPC,P,   O,   I,   U,   Y,   T,   R,   E,   W,   Q,   TAB, TAB, \
+           LCTL,SCLN,L,   K,   J,   H,   G,   F,   D,   S,   A,   RCTL,RCTL, \
+           LSFT,SLSH,DOT, COMM,M,   N,   B,   V,   C,   X,   Z,   RSFT,NO, \
+           NO,  LGUI,LALT,FN4, RALT,RGUI,NO,  NO,  RCTL),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/keyboard/macway/led.c b/keyboard/macway/led.c
new file mode 100644
index 0000000000..f76545f0ba
--- /dev/null
+++ b/keyboard/macway/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/keyboard/macway/matrix.c b/keyboard/macway/matrix.c
new file mode 100644
index 0000000000..56fb858960
--- /dev/null
+++ b/keyboard/macway/matrix.c
@@ -0,0 +1,271 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#if (MATRIX_COLS > 16)
+#   error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+#   error "MATRIX_ROWS must not exceed 255"
+#endif
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t *matrix_prev;
+static uint16_t _matrix0[MATRIX_ROWS];
+static uint16_t _matrix1[MATRIX_ROWS];
+#endif
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static uint8_t read_col(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRB = 0x00;
+    PORTB = 0xFF;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+    matrix = _matrix0;
+    matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+    if (!debouncing) {
+        uint8_t *tmp = matrix_prev;
+        matrix_prev = matrix;
+        matrix = tmp;
+    }
+
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        unselect_rows();
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        if (matrix[i] != (uint8_t)~read_col()) {
+            matrix[i] = (uint8_t)~read_col();
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); print("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+    }
+    unselect_rows();
+
+    if (debouncing) {
+        debouncing--;
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix[i] != matrix_prev[i]) {
+            return true;
+        }
+    }
+    return false;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+        pbin_reverse(matrix_get_row(row));
+#else
+        pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+        count += bitpop(matrix[i]);
+#else
+        count += bitpop16(matrix[i]);
+#endif
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+inline
+static uint8_t read_col(void)
+{
+    return PINB;
+}
+
+inline
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRC  &= ~0b11000000; // PC: 7,6
+    PORTC &= ~0b11000000;
+    DDRD  &= ~0b11000111; // PD: 7,6,2,1,0
+    PORTD &= ~0b11000111;
+    DDRF  &= ~0b11000000; // PF: 7,6
+    PORTF &= ~0b11000000;
+}
+
+inline
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    // row: 0    1    2    3    4    5    6    7    8
+    // pin: PD0, PC7, PD7, PF6, PD6, PD1, PD2, PC6, PF7
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRC  |= (1<<7);
+            PORTC &= ~(1<<7);
+            break;
+        case 2:
+            DDRD  |= (1<<7);
+            PORTD &= ~(1<<7);
+            break;
+        case 3:
+            DDRF  |= (1<<6);
+            PORTF &= ~(1<<6);
+            break;
+        case 4:
+            DDRD  |= (1<<6);
+            PORTD &= ~(1<<6);
+            break;
+        case 5:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 6:
+            DDRD  |= (1<<2);
+            PORTD &= ~(1<<2);
+            break;
+        case 7:
+            DDRC  |= (1<<6);
+            PORTC &= ~(1<<6);
+            break;
+        case 8:
+            DDRF  |= (1<<7);
+            PORTF &= ~(1<<7);
+            break;
+    }
+}