summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
authorNick Brassel <nick@tzarc.org>2019-11-06 08:04:50 +1100
committerNick Brassel <nick@tzarc.org>2020-01-24 12:45:58 +1100
commitd13ada11622977bcc0b530212b4405229805016d (patch)
tree3f8874ac3c9b5950b1fed6ac4d0081a268d9f487 /docs
parent6ff093efbee21d3f64f5b4bfdbc66d4648490523 (diff)
Add customisable EEPROM driver selection (#7274)
- uprintf -> dprintf - Fix atsam "vendor" eeprom. - Bump Kinetis K20x to 64 bytes, too. - Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value. - Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage. - Add 24LC128 by request.
Diffstat (limited to 'docs')
-rw-r--r--docs/_summary.md1
-rw-r--r--docs/eeprom_driver.md50
-rw-r--r--docs/hardware_drivers.md4
3 files changed, 55 insertions, 0 deletions
diff --git a/docs/_summary.md b/docs/_summary.md
index de81481382..08ccdca220 100644
--- a/docs/_summary.md
+++ b/docs/_summary.md
@@ -104,6 +104,7 @@
* [ADC Driver](adc_driver.md)
* [I2C Driver](i2c_driver.md)
* [WS2812 Driver](ws2812_driver.md)
+ * [EEPROM Driver](eeprom_driver.md)
* [GPIO Controls](internals_gpio_control.md)
* [Custom Matrix](custom_matrix.md)
* [Proton C Conversion](proton_c_conversion.md)
diff --git a/docs/eeprom_driver.md b/docs/eeprom_driver.md
new file mode 100644
index 0000000000..dd12d8ec7b
--- /dev/null
+++ b/docs/eeprom_driver.md
@@ -0,0 +1,50 @@
+# EEPROM Driver Configuration
+
+The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
+
+Driver | Description
+--------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+`EEPROM_DRIVER = vendor` | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
+`EEPROM_DRIVER = i2c` | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
+`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
+
+## Vendor Driver Configuration
+
+No configurable options are available.
+
+## I2C Driver Configuration
+
+Currently QMK supports 24xx-series chips over I2C. As such, requires a working i2c_master driver configuration. You can override the driver configuration via your config.h:
+
+`config.h` override | Description | Default Value
+------------------------------------------- | ----------------------------------------------------------------------------------- | ------------------------------------
+`#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS` | Base I2C address for the EEPROM -- shifted left by 1 as per i2c_master requirements | 0b10100000
+`#define EXTERNAL_EEPROM_I2C_ADDRESS(addr)` | Calculated I2C address for the EEPROM | `(EXTERNAL_EEPROM_I2C_BASE_ADDRESS)`
+`#define EXTERNAL_EEPROM_BYTE_COUNT` | Total size of the EEPROM in bytes | 8192
+`#define EXTERNAL_EEPROM_PAGE_SIZE` | Page size of the EEPROM in bytes, as specified in the datasheet | 32
+`#define EXTERNAL_EEPROM_ADDRESS_SIZE` | The number of bytes to transmit for the memory location within the EEPROM | 2
+`#define EXTERNAL_EEPROM_WRITE_TIME` | Write cycle time of the EEPROM, as specified in the datasheet | 5
+
+Default values and extended descriptions can be found in `drivers/eeprom/eeprom_i2c.h`.
+
+Alternatively, there are pre-defined hardware configurations for available chips/modules:
+
+Module | Equivalent `#define` | Source
+-----------------|---------------------------------|------------------------------------------
+CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512` | <https://www.sparkfun.com/products/14764>
+RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C` | <https://www.sparkfun.com/products/14764>
+24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/wwwproducts/en/24LC128>
+24LC256 EEPROM | `#define EEPROM_I2C_24LC256` | <https://www.sparkfun.com/products/525>
+MB85RC256V FRAM | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895>
+
+?> If you find that the EEPROM is not cooperating, ensure you've correctly shifted up your EEPROM address by 1. For example, the datasheet might state the address as `0b01010000` -- the correct value of `EXTERNAL_EEPROM_I2C_BASE_ADDRESS` needs to be `0b10100000`.
+
+## Transient Driver configuration
+
+The only configurable item for the transient EEPROM driver is its size:
+
+`config.h` override | Description | Default Value
+------------------------------- | ----------------------------------------- | -------------
+`#define TRANSIENT_EEPROM_SIZE` | Total size of the EEPROM storage in bytes | 64
+
+Default values and extended descriptions can be found in `drivers/eeprom/eeprom_transient.h`.
diff --git a/docs/hardware_drivers.md b/docs/hardware_drivers.md
index 1651877957..7e89c0d2b9 100644
--- a/docs/hardware_drivers.md
+++ b/docs/hardware_drivers.md
@@ -33,3 +33,7 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in
## IS31FL3733
Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
+
+## 24xx series external I2C EEPROM
+
+Support for an external I2C-based EEPROM instead of using the on-chip EEPROM. For more information on how to setup the driver see the [EEPROM Driver](eeprom_driver.md) page.