diff options
| author | Drashna Jaelre <drashna@live.com> | 2019-10-29 13:15:03 -0700 |
|---|---|---|
| committer | noroadsleft <18669334+noroadsleft@users.noreply.github.com> | 2019-10-29 13:15:03 -0700 |
| commit | 0e6f78547eca1e7bbb093265e79c26a301e6635a (patch) | |
| tree | 9bd2ae7a3ffb6d18e098fed96deee1d3c1cee3b0 /docs/flashing.md | |
| parent | 476f5566132032af227a4fa95ceab56f4f3e06f7 (diff) | |
[Docs] Update flashing information to include :flash target (#6999)
* Update Newbs Flashing guide
For the newbs that want to start flashing
* Update flashing docs
* Misc flashing
* Attempt at flashing in french
Lets hope I didn't butcher this too badly with machine transations
* Update docs/feature_userspace.md
* Apply language suggestions from code review
* Apply suggestions from code review
* Apply additional fr lang suggestions from code review
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: Noan Mousy <4sstylz@protonmail.ch>
Co-Authored-By: Xavier Hahn <xavier.hahn@gmail.com>
Co-Authored-By: Vincent LE GOFF <vince.legoff@gmail.com>
Diffstat (limited to 'docs/flashing.md')
| -rw-r--r-- | docs/flashing.md | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/docs/flashing.md b/docs/flashing.md index 18ae6364d4..98841c1aac 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -99,11 +99,16 @@ or make <keyboard>:<keymap>:avrdude -or if you want to flash multiple boards, use the following command - make <keyboard>:<keymap>:avrdude-loop +#### Caterina commands + +There are a number of DFU commands that you can use to flash firmware to a DFU device: + +* `:avrdude` - This is the normal option which waits until a Caterina device is available (by detecting a new COM port), and then flashes the firmware. +* `:avrdude-loop` - This runs the same command as `:avrdude`, but after each device is flashed, it will attempt to flash again. This is useful for bulk flashing. _This requires you to manually escape the loop by hitting Ctrl+C._ +* `:avrdude-split-left` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._ +* `:avrdude-split-right` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._ -When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop. ## Halfkay @@ -231,7 +236,7 @@ Flashing sequence: There are a number of DFU commands that you can use to flash firmware to a STM32 device: -* `:dfu-util` - The default command for flashing to STM32 devices. +* `:dfu-util` - The default command for flashing to STM32 devices, and will wait until an STM32 bootloader device is present. * `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards. * `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards. * `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. |