New keymap of PC98

1 files changed, 17 insertions, 7 deletions

diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h
index 6ef2c6ac30..aa0476e3e8 100644
--- a/converter/pc98_usb/config.h
+++ b/converter/pc98_usb/config.h
@@ -30,12 +30,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 16
 #define MATRIX_COLS 8
 
+/* To use new keymap framework */
+#define USE_KEYMAP_V2
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    host_get_first_key() == KC_CANCEL \
 )
 
 
@@ -46,11 +46,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_BAUD 19200
 #define SERIAL_PARITY_ODD
 #define SERIAL_BIT_ORDER_LSB
+#define SERIAL_LOGIC_POSITIVE
 
-/* PC98 Reset Port */
+/* PC98 Reset Port shared with TXD */
 #define PC98_RST_DDR    DDRD
 #define PC98_RST_PORT   PORTD
-#define PC98_RST_BIT    1
+#define PC98_RST_BIT    3
 /* PC98 Ready Port */
 #define PC98_RDY_DDR    DDRD
 #define PC98_RDY_PORT   PORTD
@@ -65,7 +66,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_RXD_PORT PORTD
 #define SERIAL_RXD_PIN  PIND
 #define SERIAL_RXD_BIT  2
+#ifdef SERIAL_LOGIC_NEGATIVE
+#define SERIAL_RXD_READ()       ~(SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))
+#else
 #define SERIAL_RXD_READ()       (SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))
+#endif
 /* RXD Interupt */
 #define SERIAL_RXD_VECT INT2_vect
 #define SERIAL_RXD_INIT()  do { \
@@ -75,6 +80,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     /* enable interrupt: INT2(falling edge) */  \
     EICRA |= ((1<<ISC21)|(0<<ISC20));           \
     EIMSK |= (1<<INT2);                         \
+    sei();                                      \
 } while (0)
 #define SERIAL_RXD_INT_ENTER()
 #define SERIAL_RXD_INT_EXIT() do {  \
@@ -82,14 +88,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     EIFR = (1<<INTF2);              \
 } while (0)
 
-/* TXD Port: Not used */
+/* TXD Port */
 #define SERIAL_TXD_DDR  DDRD
 #define SERIAL_TXD_PORT PORTD
 #define SERIAL_TXD_PIN  PIND
 #define SERIAL_TXD_BIT  3
-/* negative logic */
+#ifdef SERIAL_LOGIC_NEGATIVE
 #define SERIAL_TXD_ON()     do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
 #define SERIAL_TXD_OFF()    do { SERIAL_TXD_PORT |=  (1<<SERIAL_TXD_BIT); } while (0)
+#else
+#define SERIAL_TXD_ON()     do { SERIAL_TXD_PORT |=  (1<<SERIAL_TXD_BIT); } while (0)
+#define SERIAL_TXD_OFF()    do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
+#endif
 #define SERIAL_TXD_INIT()   do { \
     /* pin configuration: output */         \
     SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT);  \