Add ascii_usb ASCII Serial Console terminal converter

7 files changed, 448 insertions, 0 deletions

diff --git a/README.md b/README.md
index 536cc753fb..bca1c13683 100644
--- a/README.md
+++ b/README.md
@@ -40,6 +40,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 * [sun_usb](converter/sun_usb/)             - [Sun] to USB(type4, 5 and 3?)
 * [pc98_usb](converter/pc98_usb/)           - [PC98] to USB
 * [usb_usb](converter/usb_usb/)             - USB to USB(experimental)
+* [ascii_usb](converter/ascii_usb/)         - ASCII(Serial console terminal) to USB
 
 ### keyboard
 * [hhkb](keyboard/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
diff --git a/converter/ascii_usb/Makefile b/converter/ascii_usb/Makefile
new file mode 100644
index 0000000000..408aa42375
--- /dev/null
+++ b/converter/ascii_usb/Makefile
@@ -0,0 +1,82 @@
+# Target file name (without extension).
+TARGET = ascii_usb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	keymap.c \
+	matrix.c \
+	led.c \
+	protocol/serial_uart.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes	# Mouse keys
+#EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/ascii_usb/README b/converter/ascii_usb/README
new file mode 100644
index 0000000000..afd2e47f76
--- /dev/null
+++ b/converter/ascii_usb/README
@@ -0,0 +1,33 @@
+ASCII to USB keyboard protocol converter
+========================================
+This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
+Target MCU is ATMega32u4 but other USB capable AVR will also work.
+
+
+Hardware
+--------
+Connect RX, TX and GND to UART pin of AVR. Note that you may need line drvier/level shfiter like MAX232 to interface high voltage of RS-232C.
+
+
+
+Build Firmware
+--------------
+Configure UART setting and Just use 'make'
+
+    $ cd ascii_usb
+    $ make
+
+Then, load the binary to MCU with your favorite programmer.
+
+
+
+Limitation
+----------
+- This cannot see key up event, you cannot hold a key.
+- Alt, Gui(Win/Mac) modifier key are not available.
+
+
+
+Scan code
+---------
+ASCII code(0x01-7F)
diff --git a/converter/ascii_usb/config.h b/converter/ascii_usb/config.h
new file mode 100644
index 0000000000..0908997a53
--- /dev/null
+++ b/converter/ascii_usb/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5C01
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         ASCII keyboard converter
+#define DESCRIPTION     converts Serial Console Terminal into USB keyboard
+
+
+/* matrix size */
+#define MATRIX_ROWS     16
+#define MATRIX_COLS     16
+
+/* key combination for command */
+#define IS_COMMAND()    ( \
+    host_get_first_key() == KC_BRK \
+)
+
+
+/*
+ * Serial(USART) configuration
+ *     asynchronous, positive logic, 19200baud, bit order: LSB first
+ *     1-start bit, 8-data bit, odd parity, 1-stop bit
+ */
+#ifdef __AVR_ATmega32U4__
+    #define SERIAL_UART_BAUD       19200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
+        UCSR1C |= (1<<UPM11) | (1<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
+        sei(); \
+    } while(0)
+#else
+    #error "USART configuration is needed."
+#endif
+
+/* disable action features */
+#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+
+#endif
diff --git a/converter/ascii_usb/keymap.c b/converter/ascii_usb/keymap.c
new file mode 100644
index 0000000000..5c13beaffa
--- /dev/null
+++ b/converter/ascii_usb/keymap.c
@@ -0,0 +1,42 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "action_util.h"
+#include "util.h"
+#include "print.h"
+#include "keymap.h"
+
+
+// Keymap is not used. See matrix.c.
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
+{
+    return KC_NO;
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t) { .code = ACTION_NO };
+}
diff --git a/converter/ascii_usb/led.c b/converter/ascii_usb/led.c
new file mode 100644
index 0000000000..d1c39bc653
--- /dev/null
+++ b/converter/ascii_usb/led.c
@@ -0,0 +1,25 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "serial.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/converter/ascii_usb/matrix.c b/converter/ascii_usb/matrix.c
new file mode 100644
index 0000000000..e1ea8e0ab8
--- /dev/null
+++ b/converter/ascii_usb/matrix.c
@@ -0,0 +1,195 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "matrix.h"
+#include "debug.h"
+#include "action_util.h"
+#include "protocol/serial.h"
+
+
+/*
+ * Not use Matrix.
+ *
+ * ROW: 16(4bits)
+ * COL: 16(4bits)
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|00 ... 0F|
+ *  1|08 ... 1F|
+ *  :|   ...   |
+ *  :|   ...   |
+ *  E|E0 ... EF|
+ *  F|F0 ... FF|
+ *   +---------+
+ */
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_matrix = true;
+    serial_init();
+
+    debug("init\n");
+    return;
+}
+
+static void type_key(uint16_t keycode)
+{
+    if (keycode == 0) return;
+
+    uint8_t mods = keycode>>8;
+    uint8_t key = keycode&0xFF;
+    if (mods) {
+        add_mods(mods);
+        send_keyboard_report();
+    }
+
+    add_key(key);
+    send_keyboard_report();
+
+    del_key(key);
+    send_keyboard_report();
+
+    if (mods) {
+        del_mods(mods);
+        send_keyboard_report();
+    }
+}
+static uint16_t code2key(uint8_t code)
+{
+    // ASCII to key combination in US laout
+    switch (code) {
+        case 0x01 ... 0x08:                                 // Ctrl-[a-z]
+            return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+        case 0x09: return KC_TAB;                           // TAB(Ctrl-i)
+        case 0x0A ... 0x0C:                                 // Ctrl-[a-z]
+            return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+        case 0x0D: return KC_ENTER;                         // Enter(Ctrl-m)
+        case 0x0E ... 0x1A:                                 // Ctrl-[a-z]
+            return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+        case 0x1B: return KC_ESC;
+        case 0x1C: return KC_RIGHT;
+        case 0x1D: return KC_LEFT;
+        case 0x1E: return KC_UP;
+        case 0x1F: return KC_DOWN;
+        case 0x20: return KC_SPACE;
+        case 0x21: return MOD_BIT(KC_LSHIFT)<<8 | KC_1;     // !
+        case 0x22: return MOD_BIT(KC_LSHIFT)<<8 | KC_QUOTE; // "
+        case 0x23: return MOD_BIT(KC_LSHIFT)<<8 | KC_3;     // #
+        case 0x24: return MOD_BIT(KC_LSHIFT)<<8 | KC_4;     // $
+        case 0x25: return MOD_BIT(KC_LSHIFT)<<8 | KC_5;     // %
+        case 0x26: return MOD_BIT(KC_LSHIFT)<<8 | KC_7;     // &
+        case 0x27: return KC_QUOTE;                         // '
+        case 0x28: return MOD_BIT(KC_LSHIFT)<<8 | KC_9;     // (
+        case 0x29: return MOD_BIT(KC_LSHIFT)<<8 | KC_0;     // )
+        case 0x2A: return MOD_BIT(KC_LSHIFT)<<8 | KC_8;     // *
+        case 0x2B: return MOD_BIT(KC_LSHIFT)<<8 | KC_EQUAL; // +
+        case 0x2C: return KC_COMMA;                         // ,
+        case 0x2D: return KC_MINUS;                         // -
+        case 0x2E: return KC_DOT;                           // .
+        case 0x2F: return KC_SLASH;                         // /
+        case 0x30: return KC_0;
+        case 0x31 ... 0x39: // 1-9
+            return KC_1 + (code-0x31);
+        case 0x3A: return MOD_BIT(KC_LSHIFT)<<8 | KC_SCLN;  // :
+        case 0x3B: return KC_SCLN;                          // ;
+        case 0x3C: return MOD_BIT(KC_LSHIFT)<<8 | KC_COMMA; // <
+        case 0x3D: return KC_EQUAL;                         // =
+        case 0x3E: return MOD_BIT(KC_LSHIFT)<<8 | KC_DOT;   // >
+        case 0x3F: return MOD_BIT(KC_LSHIFT)<<8 | KC_SLASH; // ?
+        case 0x40: return MOD_BIT(KC_LSHIFT)<<8 | KC_2;     // @
+        case 0x41 ... 0x5A: // A-Z
+            return MOD_BIT(KC_LSHIFT)<<8 | (KC_A + (code-0x41));
+        case 0x5B: return KC_LBRACKET;                      // [
+        case 0x5C: return KC_BSLASH;                        //
+        case 0x5D: return KC_RBRACKET;                      // ]
+        case 0x5E: return MOD_BIT(KC_LSHIFT)<<8 | KC_6;     // ^
+        case 0x5F: return MOD_BIT(KC_LSHIFT)<<8 | KC_MINUS; // _
+        case 0x61 ... 0x7A: // a-z
+            return KC_A + (code-0x61);
+        case 0x7B: return MOD_BIT(KC_LSHIFT)<<8 | KC_LBRACKET; // {
+        case 0x7C: return MOD_BIT(KC_LSHIFT)<<8 | KC_BSLASH;   // |
+        case 0x7D: return MOD_BIT(KC_LSHIFT)<<8 | KC_RBRACKET; // }
+        case 0x7E: return MOD_BIT(KC_LSHIFT)<<8 | KC_GRAVE; // }
+        case 0x7F: return KC_DELETE;                        //
+    }
+    return 0;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint16_t code = serial_recv2();
+    if (code == -1) {
+        return 0;
+    }
+
+    print_hex8(code); print(" ");
+
+    // echo back
+    serial_send(code);
+    type_key(code2key(code));
+    
+
+    return code;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return false;
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return 0;
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}