[Keyboard] Grid 600 Type 05 "PRESS" Cover Module (#6368)

* add grid600 type 5 press cover module

* Update keyboards/grid600/press/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* remove unused custom keycode enum

10 files changed, 297 insertions, 0 deletions

diff --git a/keyboards/grid600/press/config.h b/keyboards/grid600/press/config.h
new file mode 100644
index 0000000000..7c93457005
--- /dev/null
+++ b/keyboards/grid600/press/config.h
@@ -0,0 +1,78 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x7539
+#define DEVICE_VER      0x0005
+#define MANUFACTURER    Grid
+#define PRODUCT         PRESS
+#define DESCRIPTION     Top module for Grid 600
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0 }
+#define MATRIX_COL_PINS { F1, F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+#define RGB_DI_PIN B6
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 4
+  #define RGBLIGHT_HUE_STEP 10
+  #define RGBLIGHT_SAT_STEP 17
+  #define RGBLIGHT_VAL_STEP 17
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_ANIMATIONS
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/grid600/press/info.json b/keyboards/grid600/press/info.json
new file mode 100644
index 0000000000..131b094af5
--- /dev/null
+++ b/keyboards/grid600/press/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Grid 600 Type 05 PRESS Cover Module", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 4, 
+    "height": 1, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/grid600/press/keymaps/default/config.h b/keyboards/grid600/press/keymaps/default/config.h
new file mode 100644
index 0000000000..60dd02a9d0
--- /dev/null
+++ b/keyboards/grid600/press/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/grid600/press/keymaps/default/keymap.c b/keyboards/grid600/press/keymaps/default/keymap.c
new file mode 100644
index 0000000000..f253c69215
--- /dev/null
+++ b/keyboards/grid600/press/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_G,  KC_R,  KC_I, KC_D
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/grid600/press/keymaps/default/readme.md b/keyboards/grid600/press/keymaps/default/readme.md
new file mode 100644
index 0000000000..b29ee67868
--- /dev/null
+++ b/keyboards/grid600/press/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for grid
diff --git a/keyboards/grid600/press/press.c b/keyboards/grid600/press/press.c
new file mode 100644
index 0000000000..33935deca4
--- /dev/null
+++ b/keyboards/grid600/press/press.c
@@ -0,0 +1,16 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "press.h"
\ No newline at end of file
diff --git a/keyboards/grid600/press/press.h b/keyboards/grid600/press/press.h
new file mode 100644
index 0000000000..ca9eac9d19
--- /dev/null
+++ b/keyboards/grid600/press/press.h
@@ -0,0 +1,32 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	K00, K01, K02, K03 \
+) { \
+	{ K00,   K01,   K02,   K03 }  \
+}
diff --git a/keyboards/grid600/press/readme.md b/keyboards/grid600/press/readme.md
new file mode 100644
index 0000000000..4113b372e9
--- /dev/null
+++ b/keyboards/grid600/press/readme.md
@@ -0,0 +1,18 @@
+# Grid 600 Type 05 "PRESS" Cover Module
+
+Cover module for Grid 600 Keyboard with 4 keys.
+
+Code for the module was originally located at [gridishere's QMK fork](https://github.com/gridishere/qmk_firmware/tree/master/keyboards/grid/gridmod5).  
+
+Please keep in mind that this is actually a separate keyboard from the one installed in the Grid 600. 
+Functionality such as layer changes and light modifications triggered on one PCB will not affect the other.  
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Grid 600 Type 05 "PRESS" cover module.   
+Hardware Availability: [zFrontier](https://en.zfrontier.com/products/grid600s)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make grid600/press:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk
new file mode 100644
index 0000000000..1fcf3841be
--- /dev/null
+++ b/keyboards/grid600/press/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/grid600/readme.md b/keyboards/grid600/readme.md
new file mode 100644
index 0000000000..f7fa6a085b
--- /dev/null
+++ b/keyboards/grid600/readme.md
@@ -0,0 +1,7 @@
+#  Grid 600 Cover Modules
+
+The Grid 600 is a tray mount 60% case supporting most standard 60% PCBs. 
+
+A unique feature of the Grid 600 is that it has five different cover modules that not only include USB C pass through, but also have functions such as RGB or additional macro keys. 
+
+This is a collection of some of the programmable modules available for this enclosure. 
\ No newline at end of file