/* * Copyright 2012 Jun Wako * This file is based on: * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse * LUFA-120219/Demos/Device/Lowlevel/GenericHID */ /* LUFA Library Copyright (C) Dean Camera, 2012. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ #include "report.h" #include "host.h" #include "host_driver.h" #include "keyboard.h" #include "action.h" #include "led.h" #include "sendchar.h" #include "debug.h" #ifdef SLEEP_LED_ENABLE # include "sleep_led.h" #endif #include "suspend.h" #include "usb_descriptor.h" #include "lufa.h" #include "quantum.h" #include "usb_device_state.h" #include #ifdef NKRO_ENABLE # include "keycode_config.h" extern keymap_config_t keymap_config; #endif #ifdef AUDIO_ENABLE # include "audio.h" #endif #ifdef BLUETOOTH_ENABLE # include "outputselect.h" # ifdef BLUETOOTH_BLUEFRUIT_LE # include "bluefruit_le.h" # elif BLUETOOTH_RN42 # include "rn42.h" # endif #endif #ifdef VIRTSER_ENABLE # include "virtser.h" #endif #ifdef MIDI_ENABLE # include "qmk_midi.h" #endif #ifdef RAW_ENABLE # include "raw_hid.h" #endif #ifdef JOYSTICK_ENABLE # include "joystick.h" #endif uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; static uint8_t keyboard_led_state = 0; static report_keyboard_t keyboard_report_sent; /* Host driver */ static uint8_t keyboard_leds(void); static void send_keyboard(report_keyboard_t *report); static void send_mouse(report_mouse_t *report); static void send_system(uint16_t data); static void send_consumer(uint16_t data); static void send_programmable_button(uint32_t data); host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button}; #ifdef VIRTSER_ENABLE // clang-format off USB_ClassInfo_CDC_Device_t cdc_device = { .Config = { .ControlInterfaceNumber = CCI_INTERFACE, .DataINEndpoint = { .Address = (CDC_IN_EPNUM | ENDPOINT_DIR_IN), .Size = CDC_EPSIZE, .Banks = 1 }, .DataOUTEndpoint = { .Address = (CDC_OUT_EPNUM | ENDPOINT_DIR_OUT), .Size = CDC_EPSIZE, .Banks = 1 }, .NotificationEndpoint = { .Address = (CDC_NOTIFICATION_EPNUM | ENDPOINT_DIR_IN), .Size = CDC_NOTIFICATION_EPSIZE, .Banks = 1 } } }; // clang-format on #endif #ifdef RAW_ENABLE /** \brief Raw HID Send * * FIXME: Needs doc */ void raw_hid_send(uint8_t *data, uint8_t length) { // TODO: implement variable size packet if (length != RAW_EPSIZE) { return; } if (USB_DeviceState != DEVICE_STATE_Configured) { return; } // TODO: decide if we allow calls to raw_hid_send() in the middle // of other endpoint usage. uint8_t ep = Endpoint_GetCurrentEndpoint(); Endpoint_SelectEndpoint(RAW_IN_EPNUM); // Check to see if the host is ready to accept another packet if (Endpoint_IsINReady()) { // Write data if (Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL)) { rawhid_state.paired = false; } // Finalize the stream transfer to send the last packet Endpoint_ClearIN(); } Endpoint_SelectEndpoint(ep); } /** \brief Raw HID Receive * * FIXME: Needs doc */ __attribute__((weak)) void raw_hid_receive(uint8_t *data, uint8_t length) { // Users should #include "raw_hid.h" in their own code // and implement this function there. Leave this as weak linkage // so users can opt to not handle data coming in. } /** \brief Raw HID Task * * FIXME: Needs doc */ static void raw_hid_task(void) { // Create a temporary buffer to hold the read in data from the host uint8_t data[RAW_EPSIZE]; bool data_read = false; // Device must be connected and configured for the task to run if (USB_DeviceState != DEVICE_STATE_Configured) return; Endpoint_SelectEndpoint(RAW_OUT_EPNUM); // Check to see if a packet has been sent from the host if (Endpoint_IsOUTReceived()) { // Check to see if the packet contains data if (Endpoint_IsReadWriteAllowed()) { /* Read data */ Endpoint_Read_Stream_LE(data, sizeof(data), NULL); data_read = true; } // Finalize the stream transfer to receive the last packet Endpoint_ClearOUT(); if (data_read) { raw_hid_receive(data, sizeof(data)); } } } #endif /******************************************************************************* * Console ******************************************************************************/ #ifdef CONSOLE_ENABLE /** \brief Console Task * * FIXME: Needs doc */ static void Console_Task(void) { /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; uint8_t ep = Endpoint_GetCurrentEndpoint(); # if 0 // TODO: impl receivechar()/recvchar() Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM); /* Check to see if a packet has been sent from the host */ if (Endpoint_IsOUTReceived()) { /* Check to see if the packet contains data */ if (Endpoint_IsReadWriteAllowed()) { /* Create a temporary buffer to hold the read in report from the host */ uint8_t ConsoleData[CONSOLE_EPSIZE]; /* Read Console Report Data */ Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL); /* Process Console Report Data */ //ProcessConsoleHIDReport(ConsoleData); } /* Finalize the stream transfer to send the last packet */ Endpoint_ClearOUT(); } # endif /* IN packet */ Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { Endpoint_SelectEndpoint(ep); return; } // fill empty bank while (Endpoint_IsReadWriteAllowed()) Endpoint_Write_8(0); // flush sendchar packet if (Endpoint_IsINReady()) { Endpoint_ClearIN(); } Endpoint_SelectEndpoint(ep); } #endif /******************************************************************************* * Joystick ******************************************************************************/ #ifdef JOYSTICK_ENABLE void send_joystick_packet(joystick_t *joystick) { uint8_t timeout = 255; static joystick_report_t r; r = (joystick_report_t) { # if JOYSTICK_AXES_COUNT > 0 .axes = { joystick->axes[0], # if JOYSTICK_AXES_COUNT >= 2 joystick->axes[1], # endif # if JOYSTICK_AXES_COUNT >= 3 joystick->axes[2], # endif # if JOYSTICK_AXES_COUNT >= 4 joystick->axes[3], # endif # if JOYSTICK_AXES_COUNT >= 5 joystick->axes[4], # endif # if JOYSTICK_AXES_COUNT >= 6 joystick->axes[5], # endif }, # endif // JOYSTICK_AXES_COUNT>0 # if JOYSTICK_BUTTON_COUNT > 0 .buttons = { joystick->buttons[0], # if JOYSTICK_BUTTON_COUNT > 8 joystick->buttons[1], # endif # if JOYSTICK_BUTTON_COUNT > 16 joystick->buttons[2], # endif # if JOYSTICK_BUTTON_COUNT > 24 joystick->buttons[3], # endif } # endif // JOYSTICK_BUTTON_COUNT>0 }; /* Select the Joystick Report Endpoint */ Endpoint_SelectEndpoint(JOYSTICK_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; /* Write Joystick Report Data */ Endpoint_Write_Stream_LE(&r, sizeof(joystick_report_t), NULL); /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); } #endif /******************************************************************************* * USB Events ******************************************************************************/ /* * Event Order of Plug in: * 0) EVENT_USB_Device_Connect * 1) EVENT_USB_Device_Suspend * 2) EVENT_USB_Device_Reset * 3) EVENT_USB_Device_Wake */ /** \brief Event USB Device Connect * * FIXME: Needs doc */ void EVENT_USB_Device_Connect(void) { print("[C]"); /* For battery powered device */ if (!USB_IsInitialized) { USB_Disable(); USB_Init(); USB_Device_EnableSOFEvents(); } } /** \brief Event USB Device Connect * * FIXME: Needs doc */ void EVENT_USB_Device_Disconnect(void) { print("[D]"); /* For battery powered device */ USB_IsInitialized = false; /* TODO: This doesn't work. After several plug in/outs can not be enumerated. if (USB_IsInitialized) { USB_Disable(); // Disable all interrupts USB_Controller_Enable(); USB_INT_Enable(USB_INT_VBUSTI); } */ } /** \brief Event USB Device Connect * * FIXME: Needs doc */ void EVENT_USB_Device_Reset(void) { print("[R]"); usb_device_state_set_reset(); } /** \brief Event USB Device Connect * * FIXME: Needs doc */ void EVENT_USB_Device_Suspend() { print("[S]"); usb_device_state_set_suspend(USB_Device_ConfigurationNumber != 0, USB_Device_ConfigurationNumber); #ifdef SLEEP_LED_ENABLE sleep_led_enable(); #endif } /** \brief Event USB Device Connect * * FIXME: Needs doc */ void EVENT_USB_Device_WakeUp() { print("[W]"); #if defined(NO_USB_STARTUP_CHECK) suspend_wakeup_init(); #endif usb_device_state_set_resume(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); #ifdef SLEEP_LED_ENABLE sleep_led_disable(); // NOTE: converters may not accept this led_set(host_keyboard_leds()); #endif } #ifdef CONSOLE_ENABLE static bool console_flush = false; # define CONSOLE_FLUSH_SET(b) \ do { \ ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { \ console_flush = b; \ } \ } while (0) /** \brief Event USB Device Start Of Frame * * FIXME: Needs doc * called every 1ms */ void EVENT_USB_Device_StartOfFrame(void) { static uint8_t count; if (++count % 50) return; count = 0; if (!console_flush) return; Console_Task(); console_flush = false; } #endif /** \brief Event handler for the USB_ConfigurationChanged event. * * This is fired when the host sets the current configuration of the USB device after enumeration. * * ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4, * it is safe to use single bank for all endpoints. */ void EVENT_USB_Device_ConfigurationChanged(void) { bool ConfigSuccess = true; #ifndef KEYBOARD_SHARED_EP /* Setup keyboard report endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((KEYBOARD_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1); #endif #if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP) /* Setup mouse report endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((MOUSE_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1); #endif #ifdef SHARED_EP_ENABLE /* Setup shared report endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((SHARED_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, SHARED_EPSIZE, 1); #endif #ifdef RAW_ENABLE /* Setup raw HID endpoints */ ConfigSuccess &= Endpoint_ConfigureEndpoint((RAW_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, RAW_EPSIZE, 1); ConfigSuccess &= Endpoint_ConfigureEndpoint((RAW_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_INTERRUPT, RAW_EPSIZE, 1); #endif #ifdef CONSOLE_ENABLE /* Setup console endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((CONSOLE_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, CONSOLE_EPSIZE, 1); # if 0 ConfigSuccess &= Endpoint_ConfigureEndpoint((CONSOLE_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_INTERRUPT, CONSOLE_EPSIZE, 1); # endif #endif #ifdef MIDI_ENABLE /* Setup MIDI stream endpoints */ ConfigSuccess &= Endpoint_ConfigureEndpoint((MIDI_STREAM_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); ConfigSuccess &= Endpoint_ConfigureEndpoint((MIDI_STREAM_OUT_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); #endif #ifdef VIRTSER_ENABLE /* Setup virtual serial endpoints */ ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_NOTIFICATION_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_OUT_EPNUM | ENDPOINT_DIR_OUT), EP_TYPE_BULK, CDC_EPSIZE, 1); ConfigSuccess &= Endpoint_ConfigureEndpoint((CDC_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_BULK, CDC_EPSIZE, 1); #endif #ifdef JOYSTICK_ENABLE /* Setup joystick endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((JOYSTICK_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1); #endif #if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP) /* Setup digitizer endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1); #endif usb_device_state_set_configuration(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); } /* FIXME: Expose this table in the docs somehow Appendix G: HID Request Support Requirements The following table enumerates the requests that need to be supported by various types of HID class devices. Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol ------------------------------------------------------------------------------------------ Boot Mouse Required Optional Optional Optional Required Required Non-Boot Mouse Required Optional Optional Optional Optional Optional Boot Keyboard Required Optional Required Required Required Required Non-Boot Keybrd Required Optional Required Required Optional Optional Other Device Required Optional Optional Optional Optional Optional */ /** \brief Event handler for the USB_ControlRequest event. * * This is fired before passing along unhandled control requests to the library for processing internally. */ void EVENT_USB_Device_ControlRequest(void) { uint8_t *ReportData = NULL; uint8_t ReportSize = 0; /* Handle HID Class specific requests */ switch (USB_ControlRequest.bRequest) { case HID_REQ_GetReport: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); // Interface switch (USB_ControlRequest.wIndex) { case KEYBOARD_INTERFACE: // TODO: test/check ReportData = (uint8_t *)&keyboard_report_sent; ReportSize = sizeof(keyboard_report_sent); break; } /* Write the report data to the control endpoint */ Endpoint_Write_Control_Stream_LE(ReportData, ReportSize); Endpoint_ClearOUT(); } break; case HID_REQ_SetReport: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { // Interface switch (USB_ControlRequest.wIndex) { case KEYBOARD_INTERFACE: #if defined(SHARED_EP_ENABLE) && !defined(KEYBOARD_SHARED_EP) case SHARED_INTERFACE: #endif Endpoint_ClearSETUP(); while (!(Endpoint_IsOUTReceived())) { if (USB_DeviceState == DEVICE_STATE_Unattached) return; } if (Endpoint_BytesInEndpoint() == 2) { uint8_t report_id = Endpoint_Read_8(); if (report_id == REPORT_ID_KEYBOARD || report_id == REPORT_ID_NKRO) { keyboard_led_state = Endpoint_Read_8(); } } else { keyboard_led_state = Endpoint_Read_8(); } Endpoint_ClearOUT(); Endpoint_ClearStatusStage(); break; } } break; case HID_REQ_GetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { Endpoint_ClearSETUP(); while (!(Endpoint_IsINReady())) ; Endpoint_Write_8(keyboard_protocol); Endpoint_ClearIN(); Endpoint_ClearStatusStage(); } } break; case HID_REQ_SetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { Endpoint_ClearSETUP(); Endpoint_ClearStatusStage(); keyboard_protocol = (USB_ControlRequest.wValue & 0xFF); clear_keyboard(); } } break; case HID_REQ_SetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); Endpoint_ClearStatusStage(); keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8); } break; case HID_REQ_GetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); while (!(Endpoint_IsINReady())) ; Endpoint_Write_8(keyboard_idle); Endpoint_ClearIN(); Endpoint_ClearStatusStage(); } break; } #ifdef VIRTSER_ENABLE CDC_Device_ProcessControlRequest(&cdc_device); #endif } /******************************************************************************* * Host driver ******************************************************************************/ /** \brief Keyboard LEDs * * FIXME: Needs doc */ static uint8_t keyboard_leds(void) { return keyboard_led_state; } /** \brief Send Keyboard * * FIXME: Needs doc */ static void send_keyboard(report_keyboard_t *report) { uint8_t timeout = 255; #ifdef BLUETOOTH_ENABLE if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef BLUETOOTH_BLUEFRUIT_LE bluefruit_le_send_keys(report->mods, report->keys, sizeof(report->keys)); # elif BLUETOOTH_RN42 rn42_send_keyboard(report); # endif return; } #endif /* Select the Keyboard Report Endpoint */ uint8_t ep = KEYBOARD_IN_EPNUM; uint8_t size = KEYBOARD_REPORT_SIZE; #ifdef NKRO_ENABLE if (keyboard_protocol && keymap_config.nkro) { ep = SHARED_IN_EPNUM; size = sizeof(struct nkro_report); } #endif Endpoint_SelectEndpoint(ep); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; /* If we're in Boot Protocol, don't send any report ID or other funky fields */ if (!keyboard_protocol) { Endpoint_Write_Stream_LE(&report->mods, 8, NULL); } else { Endpoint_Write_Stream_LE(report, size, NULL); } /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); keyboard_report_sent = *report; } /** \brief Send Mouse * * FIXME: Needs doc */ static void send_mouse(report_mouse_t *report) { #ifdef MOUSE_ENABLE uint8_t timeout = 255; # ifdef BLUETOOTH_ENABLE if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef BLUETOOTH_BLUEFRUIT_LE // FIXME: mouse buttons bluefruit_le_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons); # elif BLUETOOTH_RN42 rn42_send_mouse(report); # endif return; } # endif /* Select the Mouse Report Endpoint */ Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; /* Write Mouse Report Data */ Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL); /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); #endif } #if defined(EXTRAKEY_ENABLE) || defined(PROGRAMMABLE_BUTTON_ENABLE) static void send_report(void *report, size_t size) { uint8_t timeout = 255; if (USB_DeviceState != DEVICE_STATE_Configured) return; Endpoint_SelectEndpoint(SHARED_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; Endpoint_Write_Stream_LE(report, size, NULL); Endpoint_ClearIN(); } #endif /** \brief Send Extra * * FIXME: Needs doc */ #ifdef EXTRAKEY_ENABLE static void send_extra(uint8_t report_id, uint16_t data) { static report_extra_t r; r = (report_extra_t){.report_id = report_id, .usage = data}; send_report(&r, sizeof(r)); } #endif /** \brief Send System * * FIXME: Needs doc */ static void send_system(uint16_t data) { #ifdef EXTRAKEY_ENABLE send_extra(REPORT_ID_SYSTEM, data); #endif } /** \brief Send Consumer * * FIXME: Needs doc */ static void send_consumer(uint16_t data) { #ifdef EXTRAKEY_ENABLE # ifdef BLUETOOTH_ENABLE if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef BLUETOOTH_BLUEFRUIT_LE bluefruit_le_send_consumer_key(data); # elif BLUETOOTH_RN42 rn42_send_consumer(data); # endif return; } # endif send_extra(REPORT_ID_CONSUMER, data); #endif } static void send_programmable_button(uint32_t data) { #ifdef PROGRAMMABLE_BUTTON_ENABLE static report_programmable_button_t r; r = (report_programmable_button_t){.report_id = REPORT_ID_PROGRAMMABLE_BUTTON, .usage = data}; send_report(&r, sizeof(r)); #endif } /******************************************************************************* * sendchar ******************************************************************************/ #ifdef CONSOLE_ENABLE # define SEND_TIMEOUT 5 /** \brief Send Char * * FIXME: Needs doc */ int8_t sendchar(uint8_t c) { // Do not wait if the previous write has timed_out. // Because sendchar() is called so many times, waiting each call causes big lag. // The `timed_out` state is an approximation of the ideal `is_listener_disconnected?` state. static bool timed_out = false; // prevents Console_Task() from running during sendchar() runs. // or char will be lost. These two function is mutually exclusive. CONSOLE_FLUSH_SET(false); if (USB_DeviceState != DEVICE_STATE_Configured) return -1; uint8_t ep = Endpoint_GetCurrentEndpoint(); Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { goto ERROR_EXIT; } if (timed_out && !Endpoint_IsReadWriteAllowed()) { goto ERROR_EXIT; } timed_out = false; uint8_t timeout = SEND_TIMEOUT; while (!Endpoint_IsReadWriteAllowed()) { if (USB_DeviceState != DEVICE_STATE_Configured) { goto ERROR_EXIT; } if (Endpoint_IsStalled()) { goto ERROR_EXIT; } if (!(timeout--)) { timed_out = true; goto ERROR_EXIT; } _delay_ms(1); } Endpoint_Write_8(c); // send when bank is full if (!Endpoint_IsReadWriteAllowed()) { while (!(Endpoint_IsINReady())) ; Endpoint_ClearIN(); } else { CONSOLE_FLUSH_SET(true); } Endpoint_SelectEndpoint(ep); return 0; ERROR_EXIT: Endpoint_SelectEndpoint(ep); return -1; } #endif /******************************************************************************* * MIDI ******************************************************************************/ #ifdef MIDI_ENABLE // clang-format off USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface = { .Config = { .StreamingInterfaceNumber = AS_INTERFACE, .DataINEndpoint = { .Address = (MIDI_STREAM_IN_EPNUM | ENDPOINT_DIR_IN), .Size = MIDI_STREAM_EPSIZE, .Banks = 1 }, .DataOUTEndpoint = { .Address = (MIDI_STREAM_OUT_EPNUM | ENDPOINT_DIR_OUT), .Size = MIDI_STREAM_EPSIZE, .Banks = 1 } } }; // clang-format on void send_midi_packet(MIDI_EventPacket_t *event) { MIDI_Device_SendEventPacket(&USB_MIDI_Interface, event); } bool recv_midi_packet(MIDI_EventPacket_t *const event) { return MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, event); } #endif /******************************************************************************* * VIRTUAL SERIAL ******************************************************************************/ #ifdef VIRTSER_ENABLE /** \brief Virtual Serial Init * * FIXME: Needs doc */ void virtser_init(void) { cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR; CDC_Device_SendControlLineStateChange(&cdc_device); } /** \brief Virtual Serial Receive * * FIXME: Needs doc */ void virtser_recv(uint8_t c) __attribute__((weak)); void virtser_recv(uint8_t c) { // Ignore by default } /** \brief Virtual Serial Task * * FIXME: Needs doc */ void virtser_task(void) { uint16_t count = CDC_Device_BytesReceived(&cdc_device); uint8_t ch; for (; count; --count) { ch = CDC_Device_ReceiveByte(&cdc_device); virtser_recv(ch); } } /** \brief Virtual Serial Send * * FIXME: Needs doc */ void virtser_send(const uint8_t byte) { uint8_t timeout = 255; uint8_t ep = Endpoint_GetCurrentEndpoint(); if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) { /* IN packet */ Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address); if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { Endpoint_SelectEndpoint(ep); return; } while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); Endpoint_Write_8(byte); CDC_Device_Flush(&cdc_device); if (Endpoint_IsINReady()) { Endpoint_ClearIN(); } Endpoint_SelectEndpoint(ep); } } #endif void send_digitizer(report_digitizer_t *report) { #ifdef DIGITIZER_ENABLE uint8_t timeout = 255; if (USB_DeviceState != DEVICE_STATE_Configured) return; Endpoint_SelectEndpoint(DIGITIZER_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; Endpoint_Write_Stream_LE(report, sizeof(report_digitizer_t), NULL); Endpoint_ClearIN(); #endif } /******************************************************************************* * main ******************************************************************************/ /** \brief Setup MCU * * FIXME: Needs doc */ static void setup_mcu(void) { /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~_BV(WDRF); wdt_disable(); // For boards running at 3.3V and crystal at 16 MHz #if (F_CPU == 8000000 && F_USB == 16000000) /* Divide clock by 2 */ clock_prescale_set(clock_div_2); #else /* Disable clock division */ clock_prescale_set(clock_div_1); #endif } /** \brief Setup USB * * FIXME: Needs doc */ static void setup_usb(void) { // Leonardo needs. Without this USB device is not recognized. USB_Disable(); USB_Init(); // for Console_Task USB_Device_EnableSOFEvents(); } void protocol_setup(void) { #ifdef MIDI_ENABLE setup_midi(); #endif setup_mcu(); usb_device_state_init(); } void protocol_pre_init(void) { setup_usb(); sei(); #if defined(BLUETOOTH_RN42) rn42_init(); #endif /* wait for USB startup & debug output */ #ifdef WAIT_FOR_USB while (USB_DeviceState != DEVICE_STATE_Configured) { # if defined(INTERRUPT_CONTROL_ENDPOINT) ; # else USB_USBTask(); # endif } print("USB configured.\n"); #else USB_USBTask(); #endif } void protocol_post_init(void) { host_set_driver(&lufa_driver); } void protocol_pre_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); while (USB_DeviceState == DEVICE_STATE_Suspended) { suspend_power_down(); if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { USB_Device_SendRemoteWakeup(); clear_keyboard(); # if USB_SUSPEND_WAKEUP_DELAY > 0 // Some hubs, kvm switches, and monitors do // weird things, with USB device state bouncing // around wildly on wakeup, yielding race // conditions that can corrupt the keyboard state. // // Pause for a while to let things settle... wait_ms(USB_SUSPEND_WAKEUP_DELAY); # endif } } suspend_wakeup_init(); } #endif } void protocol_post_task(void) { #ifdef MIDI_ENABLE MIDI_Device_USBTask(&USB_MIDI_Interface); #endif #ifdef BLUETOOTH_BLUEFRUIT_LE bluefruit_le_task(); #endif #ifdef VIRTSER_ENABLE virtser_task(); CDC_Device_USBTask(&cdc_device); #endif #ifdef RAW_ENABLE raw_hid_task(); #endif #if !defined(INTERRUPT_CONTROL_ENDPOINT) USB_USBTask(); #endif } uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint16_t wIndex, const void **const DescriptorAddress) { return get_usb_descriptor(wValue, wIndex, DescriptorAddress); }