# project specific files SRC = keyboards/wilba_tech/wt_main.c \ keyboards/wilba_tech/wt_rgb_backlight.c \ drivers/issi/is31fl3733.c \ quantum/color.c \ drivers/arm/i2c_master.c ## chip/board settings # the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F3xx # Linker script to use # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ MCU_LDSCRIPT = STM32F303xC # Startup code to use # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ MCU_STARTUP = stm32f3xx # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards BOARD = GENERIC_STM32_F303XC # Cortex version MCU = cortex-m4 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 ARMV = 7 USE_FPU = yes # Vector table for application # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 OPT_DEFS = # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating # backlight effects. OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Options to pass to dfu-util when flashing DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave DFU_SUFFIX_ARGS = -p DF11 -v 0483 # Build Options # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover AUDIO_ENABLE = no # Audio output on port C6 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in #SERIAL_LINK_ENABLE = yes RAW_ENABLE = no DYNAMIC_KEYMAP_ENABLE = no CIE1931_CURVE = yes LAYOUTS = 65_ansi