From db32864ce7029d758f57729cc2f75e051a28d0a2 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 18 Jun 2016 14:30:24 -0400 Subject: Cleans up quantum/keymap situation, removes extra lufa folders (#416) * sorts out keycodes * move midi around * remove mbed * replaces keymap with qmk/keymap_common * fixes keymap.h * keymap, config, quantum rearrange * removes unneeded lufa stuff --- .../LUFA-git/Projects/USBtoSerial/USBtoSerial.txt | 78 ---------------------- 1 file changed, 78 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt (limited to 'tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt') diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt deleted file mode 100644 index 0620f93938..0000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt +++ /dev/null @@ -1,78 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage USB to Serial Converter Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * USB to Serial bridge project. This project allows a USB AVR to serve - * as a USB to USART bridge between a USB host and a device lacking a - * USB port. When programmed into a USB AVR, the AVR will enumerate as a - * virtual COM port. - * - * The AVR's hardware USART's settings will change to mirror as closely as - * possible the serial settings set on the host. However, due to hardware - * limitations, some options may not be supported (baud rates with unacceptable - * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits, - * 1.5 stop bits, parity other than none, even or odd). - * - * After running this project for the first time on a new computer, - * you will need to supply the .INF file located in this project - * project's directory as the device's driver when running under - * Windows. This will enable Windows to use its inbuilt CDC drivers, - * negating the need for custom drivers for the device. Other - * Operating Systems should automatically use their own inbuilt - * CDC-ACM drivers. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * - * - * - * - *
- * None - *
- */ - -- cgit v1.2.3