From a2e91ebec910d31a9f32cc56924ef3d6f0291e72 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Konstantin=20=C4=90or=C4=91evi=C4=87?=
 <vomindoraan@gmail.com>
Date: Sat, 20 Jul 2019 22:21:40 +0200
Subject: Update IS_COMMAND definitions to use MOD_MASK_SHIFT (#6348)

* Update IS_COMMAND definition in templates to use MOD_MASK_SHIFT

* Update IS_COMMAND in docs

* Update IS_COMMAND default definition in tmk_core

* Update table in Command docs based on suggestion

Co-Authored-By: fauxpark <fauxpark@gmail.com>
---
 quantum/template/ps2avrgb/config.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 320d71fcbc..9117bf1f91 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -47,7 +47,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
 
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
-- 
cgit v1.2.3


From 0bd03150e5952978e0a7044dcfea1bb617c2390d Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Sat, 27 Jul 2019 10:37:33 +1000
Subject: Remove NO_BACKLIGHT_CLOCK (#6418)

---
 quantum/template/ps2avrgb/config.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 9117bf1f91..3ab841d745 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -39,7 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 
-- 
cgit v1.2.3


From 405dea01bef215a0b79524e4ff74364f1bcfeadf Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Fri, 9 Aug 2019 07:09:54 +1000
Subject: Add some defaults for ATmega32A to mcu_selection.mk (#6253)

* Add some defaults for ATmega32A to mcu_selection.mk

* Remove boilerplate from templates

* Relax INTERRUPT_CONTROL_ENDPOINT and PROGRAM_CMD

* Apply suggestions from code review

Co-Authored-By: Drashna Jaelre <drashna@live.com>
---
 quantum/template/ps2avrgb/rules.mk | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk
index 98a920e182..a3ac9bd75a 100644
--- a/quantum/template/ps2avrgb/rules.mk
+++ b/quantum/template/ps2avrgb/rules.mk
@@ -1,13 +1,5 @@
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
@@ -28,6 +20,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
-- 
cgit v1.2.3


From 51bcadf38cfccc08b287554ab17e21624abf55b8 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Sat, 24 Aug 2019 16:35:11 +0100
Subject: Add 'bootloadHID' flash target (#5587)

* Add 'bootloadHID' flash target

* Prep for flash target

* Add :flash support

* Align bootloader wait messages

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update template to suggest use of :flash
---
 quantum/template/ps2avrgb/readme.md | 35 +++++------------------------------
 1 file changed, 5 insertions(+), 30 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/readme.md b/quantum/template/ps2avrgb/readme.md
index 1449b278cd..9d3ca0006f 100644
--- a/quantum/template/ps2avrgb/readme.md
+++ b/quantum/template/ps2avrgb/readme.md
@@ -12,35 +12,10 @@ Make example for this keyboard (after setting up your build environment):
 
     make %KEYBOARD%:default
 
-Flashing
-
-ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
-
-**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard.
-
-Windows: 
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset. 
-3. Press the `Find Device` button and ensure that your keyboard is found.
-4. Press the `Open .hex File` button and locate the `.hex` file you created.
-5. Press the `Flash Device` button and wait for the process to complete. 
-
-macOS:
-1. Install homebrew by typing the following:   
-    ```
-    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
-    ```
-2. Install `crosspack-avr`.  
-    ```
-    brew cask install crosspack-avr
-    ```
-3. Install the following packages:
-    ```
-    brew install python3
-    pip3 install pyusb
-    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-    ```
-4. Place your keyboard into reset. 
-5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md))
+
+    make %KEYBOARD%:default:flash
+
+**Reset Key**: Hold down the key located at *LOCATION*, commonly programmed as *KEY* while plugging in the keyboard.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-- 
cgit v1.2.3


From b624f32f944acdc59dcb130674c09090c5c404cb Mon Sep 17 00:00:00 2001
From: skullY <skullydazed@gmail.com>
Date: Fri, 30 Aug 2019 11:19:03 -0700
Subject: clang-format changes

---
 quantum/template/ps2avrgb/config.h    | 21 ++++----
 quantum/template/ps2avrgb/template.c  | 36 ++++++-------
 quantum/template/ps2avrgb/usbconfig.h | 96 +++++++++++++++++------------------
 3 files changed, 78 insertions(+), 75 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 3ab841d745..a780a10afc 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -19,22 +19,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-#define VENDOR_ID       0x20A0
-#define PRODUCT_ID      0x422D
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    You
-#define PRODUCT         %KEYBOARD%
-#define DESCRIPTION     A custom keyboard
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER You
+#define PRODUCT % KEYBOARD %
+#define DESCRIPTION A custom keyboard
 
 #define RGBLED_NUM 16
 
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 11
 
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
+#define MATRIX_ROW_PINS \
+    { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS \
+    { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
 // #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, D7 }
-#define UNUSED_PINS     {}
+#define UNUSED_PINS \
+    {}
 
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
diff --git a/quantum/template/ps2avrgb/template.c b/quantum/template/ps2avrgb/template.c
index 07f27bbb22..efc8517485 100644
--- a/quantum/template/ps2avrgb/template.c
+++ b/quantum/template/ps2avrgb/template.c
@@ -18,38 +18,38 @@
 
 #ifdef RGBLIGHT_ENABLE
 
-#include <string.h>
-#include "i2c_master.h"
-#include "rgblight.h"
+#    include <string.h>
+#    include "i2c_master.h"
+#    include "rgblight.h"
 
 extern rgblight_config_t rgblight_config;
 
 void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
+    i2c_init();
+    // call user level keymaps, if any
+    matrix_init_user();
 }
 
 // custom RGB driver
 void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
+    if (!rgblight_config.enable) {
+        memset(led, 0, 3 * RGBLED_NUM);
+    }
 
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
 }
 
 bool rgb_init = false;
 
 void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
+    // if LEDs were previously on before poweroff, turn them back on
+    if (rgb_init == false && rgblight_config.enable) {
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+        rgb_init = true;
+    }
+
+    rgblight_task();
+    matrix_scan_user();
 }
 
 #endif
diff --git a/quantum/template/ps2avrgb/usbconfig.h b/quantum/template/ps2avrgb/usbconfig.h
index 465db3a134..9ef232f045 100644
--- a/quantum/template/ps2avrgb/usbconfig.h
+++ b/quantum/template/ps2avrgb/usbconfig.h
@@ -14,15 +14,15 @@ section at the end of this file).
 
 /* ---------------------------- Hardware Config ---------------------------- */
 
-#define USB_CFG_IOPORTNAME      D
+#define USB_CFG_IOPORTNAME D
 /* This is the port where the USB bus is connected. When you configure it to
  * "B", the registers PORTB, PINB and DDRB will be used.
  */
-#define USB_CFG_DMINUS_BIT      3
+#define USB_CFG_DMINUS_BIT 3
 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
  * This may be any bit in the port.
  */
-#define USB_CFG_DPLUS_BIT       2
+#define USB_CFG_DPLUS_BIT 2
 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
  * This may be any bit in the port. Please note that D+ must also be connected
  * to interrupt pin INT0! [You can also use other interrupts, see section
@@ -31,7 +31,7 @@ section at the end of this file).
  * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
  * markers every millisecond.]
  */
-#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+#define USB_CFG_CLOCK_KHZ (F_CPU / 1000)
 /* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
  * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
  * require no crystal, they tolerate +/- 1% deviation from the nominal
@@ -40,7 +40,7 @@ section at the end of this file).
  * Since F_CPU should be defined to your actual clock rate anyway, you should
  * not need to modify this setting.
  */
-#define USB_CFG_CHECK_CRC       0
+#define USB_CFG_CHECK_CRC 0
 /* Define this to 1 if you want that the driver checks integrity of incoming
  * data packets (CRC checks). CRC checks cost quite a bit of code size and are
  * currently only available for 18 MHz crystal clock. You must choose
@@ -63,18 +63,18 @@ section at the end of this file).
 
 /* --------------------------- Functional Range ---------------------------- */
 
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
 /* Define this to 1 if you want to compile a version with two endpoints: The
  * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
  * number).
  */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
 /* Define this to 1 if you want to compile a version with three endpoints: The
  * default control endpoint 0, an interrupt-in endpoint 3 (or the number
  * configured below) and a catch-all default interrupt-in endpoint as above.
  * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
  */
-#define USB_CFG_EP3_NUMBER              3
+#define USB_CFG_EP3_NUMBER 3
 /* If the so-called endpoint 3 is used, it can now be configured to any other
  * endpoint number (except 0) with this macro. Default if undefined is 3.
  */
@@ -84,13 +84,13 @@ section at the end of this file).
  * Since the token is toggled BEFORE sending any data, the first packet is
  * sent with the oposite value of this configuration!
  */
-#define USB_CFG_IMPLEMENT_HALT          0
+#define USB_CFG_IMPLEMENT_HALT 0
 /* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
  * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
  * it is required by the standard. We have made it a config option because it
  * bloats the code considerably.
  */
-#define USB_CFG_SUPPRESS_INTR_CODE      0
+#define USB_CFG_SUPPRESS_INTR_CODE 0
 /* Define this to 1 if you want to declare interrupt-in endpoints, but don't
  * want to send any data over them. If this macro is defined to 1, functions
  * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
@@ -98,48 +98,48 @@ section at the end of this file).
  * (e.g. HID), but never want to send any data. This option saves a couple
  * of bytes in flash memory and the transmit buffers in RAM.
  */
-#define USB_CFG_INTR_POLL_INTERVAL      1
+#define USB_CFG_INTR_POLL_INTERVAL 1
 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll
  * interval. The value is in milliseconds and must not be less than 10 ms for
  * low speed devices.
  */
-#define USB_CFG_IS_SELF_POWERED         0
+#define USB_CFG_IS_SELF_POWERED 0
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
+#define USB_CFG_MAX_BUS_POWER 500
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]
  */
-#define USB_CFG_IMPLEMENT_FN_WRITE      1
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
  * transfers. Set it to 0 if you don't need it and want to save a couple of
  * bytes.
  */
-#define USB_CFG_IMPLEMENT_FN_READ       0
+#define USB_CFG_IMPLEMENT_FN_READ 0
 /* Set this to 1 if you need to send control replies which are generated
  * "on the fly" when usbFunctionRead() is called. If you only want to send
  * data from a static buffer, set it to 0 and return the data from
  * usbFunctionSetup(). This saves a couple of bytes.
  */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
 /* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
  * You must implement the function usbFunctionWriteOut() which receives all
  * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
  * can be found in 'usbRxToken'.
  */
-#define USB_CFG_HAVE_FLOWCONTROL        0
+#define USB_CFG_HAVE_FLOWCONTROL 0
 /* Define this to 1 if you want flowcontrol over USB data. See the definition
  * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
  * usbdrv.h.
  */
-#define USB_CFG_DRIVER_FLASH_PAGE       0
+#define USB_CFG_DRIVER_FLASH_PAGE 0
 /* If the device has more than 64 kBytes of flash, define this to the 64 k page
  * where the driver's constants (descriptors) are located. Or in other words:
  * Define this to 1 for boot loaders on the ATMega128.
  */
-#define USB_CFG_LONG_TRANSFERS          0
+#define USB_CFG_LONG_TRANSFERS 0
 /* Define this to 1 if you want to send/receive blocks of more than 254 bytes
  * in a single control-in or control-out transfer. Note that the capability
  * for long transfers increases the driver size.
@@ -160,7 +160,7 @@ section at the end of this file).
 /* This macro (if defined) is executed when a USB SET_ADDRESS request was
  * received.
  */
-#define USB_COUNT_SOF                   1
+#define USB_COUNT_SOF 1
 /* define this macro to 1 if you need the global variable "usbSofCount" which
  * counts SOF packets. This feature requires that the hardware interrupt is
  * connected to D- instead of D+.
@@ -184,7 +184,7 @@ section at the end of this file).
  * Please note that Start Of Frame detection works only if D- is wired to the
  * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
  */
-#define USB_CFG_CHECK_DATA_TOGGLING     0
+#define USB_CFG_CHECK_DATA_TOGGLING 0
 /* define this macro to 1 if you want to filter out duplicate data packets
  * sent by the host. Duplicates occur only as a consequence of communication
  * errors, when the host does not receive an ACK. Please note that you need to
@@ -192,11 +192,11 @@ section at the end of this file).
  * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
  * for each control- and out-endpoint to check for duplicate packets.
  */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
 /* define this macro to 1 if you want the function usbMeasureFrameLength()
  * compiled in. This function can be used to calibrate the AVR's RC oscillator.
  */
-#define USB_USE_FAST_CRC                0
+#define USB_USE_FAST_CRC 0
 /* The assembler module has two implementations for the CRC algorithm. One is
  * faster, the other is smaller. This CRC routine is only used for transmitted
  * messages where timing is not critical. The faster routine needs 31 cycles
@@ -207,7 +207,7 @@ section at the end of this file).
 
 /* -------------------------- Device Description --------------------------- */
 
-#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
 /* USB vendor ID for the device, low byte first. If you have registered your
  * own Vendor ID, define it here. Otherwise you may use one of obdev's free
  * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
@@ -216,7 +216,7 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
 /* This is the ID of the product, low byte first. It is interpreted in the
  * scope of the vendor ID. If you have registered your own VID with usb.org
  * or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -227,10 +227,10 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+#define USB_CFG_DEVICE_VERSION 0x00, 0x02
 /* Version number of the device: Minor number first, then major number.
  */
-#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
 #define USB_CFG_VENDOR_NAME_LEN 13
 /* These two values define the vendor name returned by the USB device. The name
  * must be given as a list of characters under single quotes. The characters
@@ -240,7 +240,7 @@ section at the end of this file).
  * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
  * details.
  */
-#define USB_CFG_DEVICE_NAME     'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
 #define USB_CFG_DEVICE_NAME_LEN 8
 /* Same as above for the device name. If you don't want a device name, undefine
  * the macros. See the file USB-IDs-for-free.txt before you assign a name if
@@ -255,20 +255,20 @@ section at the end of this file).
  * to fine tune control over USB descriptors such as the string descriptor
  * for the serial number.
  */
-#define USB_CFG_DEVICE_CLASS        0
-#define USB_CFG_DEVICE_SUBCLASS     0
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
 /* See USB specification if you want to conform to an existing device class.
  * Class 0xff is "vendor specific".
  */
-#define USB_CFG_INTERFACE_CLASS     3   /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+#define USB_CFG_INTERFACE_CLASS 3    /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
 /* See USB specification if you want to conform to an existing device class or
  * protocol. The following classes must be set at interface level:
  * HID class is 3, no subclass and protocol required (but may be useful!)
  * CDC class is 2, use subclass 2 and protocol 1 for ACM
  */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
 /* Define this to the length of the HID report descriptor, if you implement
  * an HID device. Otherwise don't define it or define it to 0.
  * If you use this define, you must add a PROGMEM character array named
@@ -333,19 +333,19 @@ section at the end of this file).
  * };
  */
 
-#define USB_CFG_DESCR_PROPS_DEVICE                  0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
-#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_HID                     0
-#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_HID_REPORT              0
-#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
 
 #define usbMsgPtr_t unsigned short
 /* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
@@ -374,10 +374,10 @@ section at the end of this file).
 
 /* Set INT1 for D- falling edge to count SOF */
 /* #define USB_INTR_CFG            EICRA */
-#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
 /* #define USB_INTR_CFG_CLR        0 */
 /* #define USB_INTR_ENABLE         EIMSK */
-#define USB_INTR_ENABLE_BIT     INT1
+#define USB_INTR_ENABLE_BIT INT1
 /* #define USB_INTR_PENDING        EIFR */
-#define USB_INTR_PENDING_BIT    INTF1
-#define USB_INTR_VECTOR         INT1_vect
+#define USB_INTR_PENDING_BIT INTF1
+#define USB_INTR_VECTOR INT1_vect
-- 
cgit v1.2.3


From de4a47f1cc28c4ef66e7560eac2a50f717070ae2 Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Sat, 21 Sep 2019 15:06:32 +1000
Subject: Cleanup rules.mk for 32A and 328P keyboards (#6767)

---
 quantum/template/ps2avrgb/rules.mk | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk
index a3ac9bd75a..bda115db55 100644
--- a/quantum/template/ps2avrgb/rules.mk
+++ b/quantum/template/ps2avrgb/rules.mk
@@ -1,10 +1,14 @@
 # MCU name
 MCU = atmega32a
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options
-- 
cgit v1.2.3


From ed1bf3afa25d7e7674df7e8618dfaf243de3058b Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Thu, 10 Oct 2019 21:48:37 +1100
Subject: Prevent clang-format messing up placeholder tokens within keyboard
 templates (#6790)

* Use .template file extension for keyboard template files

* Filter out .template files completely before passing to clang-format

* Undo file extension stuff; just ignore quantum/template dir
---
 quantum/template/ps2avrgb/config.h   | 11 ++---
 quantum/template/ps2avrgb/keyboard.c | 90 ++++++++++++++++++++++++++++++++++++
 quantum/template/ps2avrgb/template.c | 90 ------------------------------------
 3 files changed, 94 insertions(+), 97 deletions(-)
 create mode 100644 quantum/template/ps2avrgb/keyboard.c
 delete mode 100644 quantum/template/ps2avrgb/template.c

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index a780a10afc..f6d7c25e04 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID 0x422D
 #define DEVICE_VER 0x0001
 #define MANUFACTURER You
-#define PRODUCT % KEYBOARD %
+#define PRODUCT %KEYBOARD%
 #define DESCRIPTION A custom keyboard
 
 #define RGBLED_NUM 16
@@ -31,13 +31,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 11
 
-#define MATRIX_ROW_PINS \
-    { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS \
-    { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
 // #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, D7 }
-#define UNUSED_PINS \
-    {}
+#define UNUSED_PINS {}
 
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
diff --git a/quantum/template/ps2avrgb/keyboard.c b/quantum/template/ps2avrgb/keyboard.c
new file mode 100644
index 0000000000..efc8517485
--- /dev/null
+++ b/quantum/template/ps2avrgb/keyboard.c
@@ -0,0 +1,90 @@
+/* Copyright %YEAR% %YOUR_NAME%
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "%KEYBOARD%.h"
+
+#ifdef RGBLIGHT_ENABLE
+
+#    include <string.h>
+#    include "i2c_master.h"
+#    include "rgblight.h"
+
+extern rgblight_config_t rgblight_config;
+
+void matrix_init_kb(void) {
+    i2c_init();
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+// custom RGB driver
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        memset(led, 0, 3 * RGBLED_NUM);
+    }
+
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+    // if LEDs were previously on before poweroff, turn them back on
+    if (rgb_init == false && rgblight_config.enable) {
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+        rgb_init = true;
+    }
+
+    rgblight_task();
+    matrix_scan_user();
+}
+
+#endif
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/
diff --git a/quantum/template/ps2avrgb/template.c b/quantum/template/ps2avrgb/template.c
deleted file mode 100644
index efc8517485..0000000000
--- a/quantum/template/ps2avrgb/template.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* Copyright %YEAR% %YOUR_NAME%
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "%KEYBOARD%.h"
-
-#ifdef RGBLIGHT_ENABLE
-
-#    include <string.h>
-#    include "i2c_master.h"
-#    include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-    i2c_init();
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        memset(led, 0, 3 * RGBLED_NUM);
-    }
-
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-        rgb_init = true;
-    }
-
-    rgblight_task();
-    matrix_scan_user();
-}
-
-#endif
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/
-- 
cgit v1.2.3


From bb43010170a955053868376d5dcfd3abba5b16c9 Mon Sep 17 00:00:00 2001
From: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
Date: Fri, 11 Oct 2019 22:04:00 -0700
Subject: Fix broken link to ps2avrgb flashing instructions (#7011)

---
 quantum/template/ps2avrgb/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/readme.md b/quantum/template/ps2avrgb/readme.md
index 9d3ca0006f..3dce0e9505 100644
--- a/quantum/template/ps2avrgb/readme.md
+++ b/quantum/template/ps2avrgb/readme.md
@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make %KEYBOARD%:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md))
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
 
     make %KEYBOARD%:default:flash
 
-- 
cgit v1.2.3


From 64b7cfe735339193ae78fe0f13029b0e027af7a7 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Tue, 29 Oct 2019 22:53:11 +0000
Subject:  Refactor ps2avrgb i2c ws2812 to core  (#7183)

* Refactor ps2avrgb i2c ws2812 to core

* Refactor jj40 to use ws2812 i2c driver

* Refactor ps2avrgb template to use ws2812 i2c driver

* Add ws2812 stub files

* clang-format and driver config

* Add ws2812 driver docs

* Fix default config values

* Update tmk_core/protocol/vusb/main.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>
---
 quantum/template/ps2avrgb/keyboard.c | 38 ------------------------------------
 quantum/template/ps2avrgb/rules.mk   |  4 +---
 2 files changed, 1 insertion(+), 41 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/keyboard.c b/quantum/template/ps2avrgb/keyboard.c
index efc8517485..73cd668f85 100644
--- a/quantum/template/ps2avrgb/keyboard.c
+++ b/quantum/template/ps2avrgb/keyboard.c
@@ -16,44 +16,6 @@
 
 #include "%KEYBOARD%.h"
 
-#ifdef RGBLIGHT_ENABLE
-
-#    include <string.h>
-#    include "i2c_master.h"
-#    include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-    i2c_init();
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        memset(led, 0, 3 * RGBLED_NUM);
-    }
-
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-        rgb_init = true;
-    }
-
-    rgblight_task();
-    matrix_scan_user();
-}
-
-#endif
-
 // Optional override functions below.
 // You can leave any or all of these undefined.
 // These are only required if you want to perform custom actions.
diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk
index bda115db55..ec57b03dcb 100644
--- a/quantum/template/ps2avrgb/rules.mk
+++ b/quantum/template/ps2avrgb/rules.mk
@@ -19,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c
-- 
cgit v1.2.3


From e6cc9cc78d40af1386f9a116d5fcc95c20233110 Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Sat, 2 Nov 2019 13:06:03 +1100
Subject: Template updates (#7221)

* Template updates

* Flesh out info.json & keymap.c, and turn double spaces section into a list

* Add enum to demonstrate layer naming

* Semicolon
---
 quantum/template/ps2avrgb/keyboard.c | 52 ------------------------------------
 quantum/template/ps2avrgb/readme.md  |  6 ++---
 quantum/template/ps2avrgb/rules.mk   | 18 +++++++------
 3 files changed, 13 insertions(+), 63 deletions(-)
 delete mode 100644 quantum/template/ps2avrgb/keyboard.c

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/keyboard.c b/quantum/template/ps2avrgb/keyboard.c
deleted file mode 100644
index 73cd668f85..0000000000
--- a/quantum/template/ps2avrgb/keyboard.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* Copyright %YEAR% %YOUR_NAME%
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "%KEYBOARD%.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/
diff --git a/quantum/template/ps2avrgb/readme.md b/quantum/template/ps2avrgb/readme.md
index 3dce0e9505..b45ef91c9d 100644
--- a/quantum/template/ps2avrgb/readme.md
+++ b/quantum/template/ps2avrgb/readme.md
@@ -4,9 +4,9 @@
 
 A short description of the keyboard/project
 
-Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername)  
-Hardware Supported: The PCBs, controllers supported  
-Hardware Availability: links to where you can find this hardware
+* Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername)
+* Hardware Supported: The PCBs, controllers supported
+* Hardware Availability: links to where you can find this hardware
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk
index ec57b03dcb..b9b81a6750 100644
--- a/quantum/template/ps2avrgb/rules.mk
+++ b/quantum/template/ps2avrgb/rules.mk
@@ -11,14 +11,16 @@ MCU = atmega32a
 #   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
-# build options
-BOOTMAGIC_ENABLE = no
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = yes
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-- 
cgit v1.2.3


From 3f6426ff5f14d1cdac9af935aaf175d3dbca3592 Mon Sep 17 00:00:00 2001
From: Stephen Hogsten <stephenhogsten@gmail.com>
Date: Mon, 11 Nov 2019 18:27:20 -0800
Subject: disable deprecated actions (#7211)

* disable deprecated actions

* wrap no action with link time optimization test

* fix link time optimization check
---
 quantum/template/ps2avrgb/config.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index f6d7c25e04..4deb719f5a 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -44,6 +44,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-- 
cgit v1.2.3


From 30473357290747be06e9200a7d9c751738a3b0a1 Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Fri, 15 Nov 2019 10:21:22 +1100
Subject: =?UTF-8?q?Add=20support=20for=20configurable=20polling=20interval?=
 =?UTF-8?q?=20and=20power=20usage=20o=E2=80=A6=20(#7336)?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
---
 quantum/template/ps2avrgb/usbconfig.h | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/usbconfig.h b/quantum/template/ps2avrgb/usbconfig.h
index 9ef232f045..75f318b991 100644
--- a/quantum/template/ps2avrgb/usbconfig.h
+++ b/quantum/template/ps2avrgb/usbconfig.h
@@ -98,20 +98,10 @@ section at the end of this file).
  * (e.g. HID), but never want to send any data. This option saves a couple
  * of bytes in flash memory and the transmit buffers in RAM.
  */
-#define USB_CFG_INTR_POLL_INTERVAL 1
-/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
- * interval. The value is in milliseconds and must not be less than 10 ms for
- * low speed devices.
- */
 #define USB_CFG_IS_SELF_POWERED 0
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER 500
-/* Set this variable to the maximum USB bus power consumption of your device.
- * The value is in milliamperes. [It will be divided by two since USB
- * communicates power requirements in units of 2 mA.]
- */
 #define USB_CFG_IMPLEMENT_FN_WRITE 1
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
  * transfers. Set it to 0 if you don't need it and want to save a couple of
-- 
cgit v1.2.3


From 519df78cdbf7211b9e1ac6b961b0e10bb5164914 Mon Sep 17 00:00:00 2001
From: fauxpark <fauxpark@gmail.com>
Date: Fri, 15 Nov 2019 10:21:53 +1100
Subject: Set device version from config.h for V-USB boards (#7316)

---
 quantum/template/ps2avrgb/usbconfig.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/usbconfig.h b/quantum/template/ps2avrgb/usbconfig.h
index 75f318b991..83ad06544d 100644
--- a/quantum/template/ps2avrgb/usbconfig.h
+++ b/quantum/template/ps2avrgb/usbconfig.h
@@ -217,7 +217,7 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define USB_CFG_DEVICE_VERSION 0x00, 0x02
+#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
 /* Version number of the device: Minor number first, then major number.
  */
 #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-- 
cgit v1.2.3


From 25e9853efe28e8897cd9128d7515d3f60f482aad Mon Sep 17 00:00:00 2001
From: Erovia <Erovia@users.noreply.github.com>
Date: Tue, 19 Nov 2019 22:00:45 +0100
Subject: [Core] Fix ps2avrgb template (#7412)

---
 quantum/template/ps2avrgb/config.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'quantum/template/ps2avrgb')

diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 4deb719f5a..d93512bca6 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -22,7 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID 0x20A0
 #define PRODUCT_ID 0x422D
 #define DEVICE_VER 0x0001
-#define MANUFACTURER You
+#define MANUFACTURER %YOUR_NAME%
 #define PRODUCT %KEYBOARD%
 #define DESCRIPTION A custom keyboard
 
-- 
cgit v1.2.3