From f6d56675f9f981c5464f0ca7a1fbb0162154e8c5 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 13 May 2015 11:13:10 +0900 Subject: Squashed 'tmk_core/' changes from caca2c0..dc0e46e dc0e46e Rename LUFA to LUFA-git 3bfa7fa Remove LUFA-120730 215b764 Merge commit 'afa0f22a9299686fd88f58ce09c5b521ac917e8f' as 'protocol/lufa/LUFA' afa0f22 Squashed 'protocol/lufa/LUFA/' content from commit def7fca c0c42fa Remove submodule of LUFA 30f897d Merge commit '87ced33feb74e79c3281dda36eb6d6d153399b41' as 'protocol/usb_hid/USB_Host_Shield_2.0' 87ced33 Squashed 'protocol/usb_hid/USB_Host_Shield_2.0/' content from commit aab4a69 14f6d49 Remove submodule of USB_Host_Shield_2.0 git-subtree-dir: tmk_core git-subtree-split: dc0e46eaa4367d4e218f8816e3c117895820f07c --- protocol/usb_hid/USB_Host_Shield_2.0 | 1 - .../usb_hid/USB_Host_Shield_2.0/masstorage.cpp | 1266 ++++++++++++++++++++ 2 files changed, 1266 insertions(+), 1 deletion(-) delete mode 160000 protocol/usb_hid/USB_Host_Shield_2.0 create mode 100644 protocol/usb_hid/USB_Host_Shield_2.0/masstorage.cpp (limited to 'protocol/usb_hid/USB_Host_Shield_2.0/masstorage.cpp') diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 index 7c2e6c1bcd..0000000000 --- a/protocol/usb_hid/USB_Host_Shield_2.0 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead47 diff --git a/protocol/usb_hid/USB_Host_Shield_2.0/masstorage.cpp b/protocol/usb_hid/USB_Host_Shield_2.0/masstorage.cpp new file mode 100644 index 0000000000..9299f71a43 --- /dev/null +++ b/protocol/usb_hid/USB_Host_Shield_2.0/masstorage.cpp @@ -0,0 +1,1266 @@ +/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#include "masstorage.h" + +const uint8_t BulkOnly::epDataInIndex = 1; +const uint8_t BulkOnly::epDataOutIndex = 2; +const uint8_t BulkOnly::epInterruptInIndex = 3; + +//////////////////////////////////////////////////////////////////////////////// + +// Interface code + +//////////////////////////////////////////////////////////////////////////////// + +/** + * Get the capacity of the media + * + * @param lun Logical Unit Number + * @return media capacity + */ +uint32_t BulkOnly::GetCapacity(uint8_t lun) { + if(LUNOk[lun]) + return CurrentCapacity[lun]; + return 0LU; +} + +/** + * Get the sector (block) size used on the media + * + * @param lun Logical Unit Number + * @return media sector size + */ +uint16_t BulkOnly::GetSectorSize(uint8_t lun) { + if(LUNOk[lun]) + return CurrentSectorSize[lun]; + return 0U; +} + +/** + * Test if LUN is ready for use + * + * @param lun Logical Unit Number + * @return true if LUN is ready for use + */ +bool BulkOnly::LUNIsGood(uint8_t lun) { + return LUNOk[lun]; +} + +/** + * Test if LUN is write protected + * + * @param lun Logical Unit Number + * @return cached status of write protect switch + */ +bool BulkOnly::WriteProtected(uint8_t lun) { + return WriteOk[lun]; +} + +/** + * Wrap and execute a SCSI CDB with length of 6 + * + * @param cdb CDB to execute + * @param buf_size Size of expected transaction + * @param buf Buffer + * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT + * @return + */ +uint8_t BulkOnly::SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) { + // promote buf_size to 32bits. + CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir); + //SetCurLUN(cdb->LUN); + return (HandleSCSIError(Transaction(&cbw, buf_size, buf))); +} + +/** + * Wrap and execute a SCSI CDB with length of 10 + * + * @param cdb CDB to execute + * @param buf_size Size of expected transaction + * @param buf Buffer + * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT + * @return + */ +uint8_t BulkOnly::SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) { + // promote buf_size to 32bits. + CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir); + //SetCurLUN(cdb->LUN); + return (HandleSCSIError(Transaction(&cbw, buf_size, buf))); +} + +/** + * Lock or Unlock the tray or door on device. + * Caution: Some devices with buggy firmware will lock up. + * + * @param lun Logical Unit Number + * @param lock 1 to lock, 0 to unlock + * @return + */ +uint8_t BulkOnly::LockMedia(uint8_t lun, uint8_t lock) { + Notify(PSTR("\r\nLockMedia\r\n"), 0x80); + Notify(PSTR("---------\r\n"), 0x80); + + CDB6_t cdb = CDB6_t(SCSI_CMD_PREVENT_REMOVAL, lun, (uint8_t)0, lock); + return SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_IN); +} + +/** + * Media control, for spindle motor and media tray or door. + * This includes CDROM, TAPE and anything with a media loader. + * + * @param lun Logical Unit Number + * @param ctl 0x00 Stop Motor, 0x01 Start Motor, 0x02 Eject Media, 0x03 Load Media + * @return 0 on success + */ +uint8_t BulkOnly::MediaCTL(uint8_t lun, uint8_t ctl) { + Notify(PSTR("\r\nMediaCTL\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + + uint8_t rcode = MASS_ERR_UNIT_NOT_READY; + if(bAddress) { + CDB6_t cdb = CDB6_t(SCSI_CMD_START_STOP_UNIT, lun, ctl & 0x03, 0); + rcode = SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)MASS_CMD_DIR_OUT); + } else { + SetCurLUN(lun); + } + return rcode; +} + +/** + * Read data from media + * + * @param lun Logical Unit Number + * @param addr LBA address on media to read + * @param bsize size of a block (we should probably use the cached size) + * @param blocks how many blocks to read + * @param buf memory that is able to hold the requested data + * @return 0 on success + */ +uint8_t BulkOnly::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf) { + if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA; + Notify(PSTR("\r\nRead LUN:\t"), 0x80); + D_PrintHex (lun, 0x90); + Notify(PSTR("\r\nLBA:\t\t"), 0x90); + D_PrintHex (addr, 0x90); + Notify(PSTR("\r\nblocks:\t\t"), 0x90); + D_PrintHex (blocks, 0x90); + Notify(PSTR("\r\nblock size:\t"), 0x90); + D_PrintHex (bsize, 0x90); + Notify(PSTR("\r\n---------\r\n"), 0x80); + CDB10_t cdb = CDB10_t(SCSI_CMD_READ_10, lun, blocks, addr); + +again: + uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), buf, (uint8_t)MASS_CMD_DIR_IN); + + if(er == MASS_ERR_STALL) { + MediaCTL(lun, 1); + delay(150); + if(!TestUnitReady(lun)) goto again; + } + return er; +} + +/** + * Write data to media + * + * @param lun Logical Unit Number + * @param addr LBA address on media to write + * @param bsize size of a block (we should probably use the cached size) + * @param blocks how many blocks to write + * @param buf memory that contains the data to write + * @return 0 on success + */ +uint8_t BulkOnly::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf) { + if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA; + if(!WriteOk[lun]) return MASS_ERR_WRITE_PROTECTED; + Notify(PSTR("\r\nWrite LUN:\t"), 0x80); + D_PrintHex (lun, 0x90); + Notify(PSTR("\r\nLBA:\t\t"), 0x90); + D_PrintHex (addr, 0x90); + Notify(PSTR("\r\nblocks:\t\t"), 0x90); + D_PrintHex (blocks, 0x90); + Notify(PSTR("\r\nblock size:\t"), 0x90); + D_PrintHex (bsize, 0x90); + Notify(PSTR("\r\n---------\r\n"), 0x80); + CDB10_t cdb = CDB10_t(SCSI_CMD_WRITE_10, lun, blocks, addr); + +again: + uint8_t er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), (void*)buf, (uint8_t)MASS_CMD_DIR_OUT); + + if(er == MASS_ERR_WRITE_STALL) { + MediaCTL(lun, 1); + delay(150); + if(!TestUnitReady(lun)) goto again; + } + return er; +} + +// End of user functions, the remaining code below is driver internals. +// Only developer serviceable parts below! + +//////////////////////////////////////////////////////////////////////////////// + +// Main driver code + +//////////////////////////////////////////////////////////////////////////////// + +BulkOnly::BulkOnly(USB *p) : +pUsb(p), +bAddress(0), +bIface(0), +bNumEP(1), +qNextPollTime(0), +bPollEnable(false), +//dCBWTag(0), +bLastUsbError(0) { + ClearAllEP(); + dCBWTag = 0; + if(pUsb) + pUsb->RegisterDeviceClass(this); +} + +/** + * USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET == success + * We need to standardize either the rcode, or change the API to return values + * so a signal that additional actions are required can be produced. + * Some of these codes do exist already. + * + * TECHNICAL: We could do most of this code elsewhere, with the exception of checking the class instance. + * Doing so would save some program memory when using multiple drivers. + * + * @param parent USB address of parent + * @param port address of port on parent + * @param lowspeed true if device is low speed + * @return + */ +uint8_t BulkOnly::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) { + + const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR); + + uint8_t buf[constBufSize]; + USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast(buf); + uint8_t rcode; + UsbDevice *p = NULL; + EpInfo *oldep_ptr = NULL; + USBTRACE("MS ConfigureDevice\r\n"); + ClearAllEP(); + AddressPool &addrPool = pUsb->GetAddressPool(); + + + if(bAddress) + return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE; + + // + // Get pointer to pseudo device with address 0 assigned + p = addrPool.GetUsbDevicePtr(0); + if(!p) { + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + } + + if(!p->epinfo) { + USBTRACE("epinfo\r\n"); + return USB_ERROR_EPINFO_IS_NULL; + } + + // Save old pointer to EP_RECORD of address 0 + oldep_ptr = p->epinfo; + + // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence + p->epinfo = epInfo; + + p->lowspeed = lowspeed; + // Get device descriptor + rcode = pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf); + + // Restore p->epinfo + p->epinfo = oldep_ptr; + + if(rcode) { + goto FailGetDevDescr; + } + // Allocate new address according to device class + bAddress = addrPool.AllocAddress(parent, false, port); + + if(!bAddress) + return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; + + // Extract Max Packet Size from the device descriptor + epInfo[0].maxPktSize = udd->bMaxPacketSize0; + // Steal and abuse from epInfo structure to save on memory. + epInfo[1].epAddr = udd->bNumConfigurations; + // + return USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET; + +FailGetDevDescr: +#ifdef DEBUG_USB_HOST + NotifyFailGetDevDescr(rcode); +#endif + rcode = USB_ERROR_FailGetDevDescr; + + Release(); + return rcode; +}; + +/** + * + * @param parent (not used) + * @param port (not used) + * @param lowspeed true if device is low speed + * @return 0 for success + */ +uint8_t BulkOnly::Init(uint8_t parent, uint8_t port, bool lowspeed) { + uint8_t rcode; + uint8_t num_of_conf = epInfo[1].epAddr; // number of configurations + epInfo[1].epAddr = 0; + USBTRACE("MS Init\r\n"); + + AddressPool &addrPool = pUsb->GetAddressPool(); + UsbDevice *p = addrPool.GetUsbDevicePtr(bAddress); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + // Assign new address to the device + delay(2000); + rcode = pUsb->setAddr(0, 0, bAddress); + + if(rcode) { + p->lowspeed = false; + addrPool.FreeAddress(bAddress); + bAddress = 0; + USBTRACE2("setAddr:", rcode); + return rcode; + } + + USBTRACE2("Addr:", bAddress); + + p->lowspeed = false; + + p = addrPool.GetUsbDevicePtr(bAddress); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + p->lowspeed = lowspeed; + + // Assign epInfo to epinfo pointer + rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo); + + if(rcode) + goto FailSetDevTblEntry; + + USBTRACE2("NC:", num_of_conf); + + for(uint8_t i = 0; i < num_of_conf; i++) { + ConfigDescParser< USB_CLASS_MASS_STORAGE, + MASS_SUBCLASS_SCSI, + MASS_PROTO_BBB, + CP_MASK_COMPARE_CLASS | + CP_MASK_COMPARE_SUBCLASS | + CP_MASK_COMPARE_PROTOCOL > BulkOnlyParser(this); + + rcode = pUsb->getConfDescr(bAddress, 0, i, &BulkOnlyParser); + + if(rcode) + goto FailGetConfDescr; + + if(bNumEP > 1) + break; + } + + if(bNumEP < 3) + return USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED; + + // Assign epInfo to epinfo pointer + pUsb->setEpInfoEntry(bAddress, bNumEP, epInfo); + + USBTRACE2("Conf:", bConfNum); + + // Set Configuration Value + rcode = pUsb->setConf(bAddress, 0, bConfNum); + + if(rcode) + goto FailSetConfDescr; + + //Linux does a 1sec delay after this. + delay(1000); + + rcode = GetMaxLUN(&bMaxLUN); + if(rcode) + goto FailGetMaxLUN; + + if(bMaxLUN >= MASS_MAX_SUPPORTED_LUN) bMaxLUN = MASS_MAX_SUPPORTED_LUN - 1; + ErrorMessage (PSTR("MaxLUN"), bMaxLUN); + + delay(1000); // Delay a bit for slow firmware. + + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + InquiryResponse response; + rcode = Inquiry(lun, sizeof (InquiryResponse), (uint8_t*) & response); + if(rcode) { + ErrorMessage (PSTR("Inquiry"), rcode); + } else { +#if 0 + printf("LUN %i `", lun); + uint8_t *buf = response.VendorID; + for(int i = 0; i < 28; i++) printf("%c", buf[i]); + printf("'\r\nQualifier %1.1X ", response.PeripheralQualifier); + printf("Device type %2.2X ", response.DeviceType); + printf("RMB %1.1X ", response.Removable); + printf("SSCS %1.1X ", response.SCCS); + uint8_t sv = response.Version; + printf("SCSI version %2.2X\r\nDevice conforms to ", sv); + switch(sv) { + case 0: + printf("No specific"); + break; + case 1: + printf("ANSI X3.131-1986 (ANSI 1)"); + break; + case 2: + printf("ANSI X3.131-1994 (ANSI 2)"); + break; + case 3: + printf("ANSI INCITS 301-1997 (SPC)"); + break; + case 4: + printf("ANSI INCITS 351-2001 (SPC-2)"); + break; + case 5: + printf("ANSI INCITS 408-2005 (SPC-4)"); + break; + case 6: + printf("T10/1731-D (SPC-4)"); + break; + default: + printf("unknown"); + } + printf(" standards.\r\n"); +#endif + uint8_t tries = 0xf0; + while((rcode = TestUnitReady(lun))) { + if(rcode == 0x08) break; // break on no media, this is OK to do. + // try to lock media and spin up + if(tries < 14) { + LockMedia(lun, 1); + MediaCTL(lun, 1); // I actually have a USB stick that needs this! + } else delay(2 * (tries + 1)); + tries++; + if(!tries) break; + } + if(!rcode) { + delay(1000); + LUNOk[lun] = CheckLUN(lun); + if(!LUNOk[lun]) LUNOk[lun] = CheckLUN(lun); + } + } + } + + + CheckMedia(); + + rcode = OnInit(); + + if(rcode) + goto FailOnInit; + +#ifdef DEBUG_USB_HOST + USBTRACE("MS configured\r\n\r\n"); +#endif + + bPollEnable = true; + + //USBTRACE("Poll enabled\r\n"); + return 0; + +FailSetConfDescr: +#ifdef DEBUG_USB_HOST + NotifyFailSetConfDescr(); + goto Fail; +#endif + +FailOnInit: +#ifdef DEBUG_USB_HOST + USBTRACE("OnInit:"); + goto Fail; +#endif + +FailGetMaxLUN: +#ifdef DEBUG_USB_HOST + USBTRACE("GetMaxLUN:"); + goto Fail; +#endif + + //#ifdef DEBUG_USB_HOST + //FailInvalidSectorSize: + // USBTRACE("Sector Size is NOT VALID: "); + // goto Fail; + //#endif + +FailSetDevTblEntry: +#ifdef DEBUG_USB_HOST + NotifyFailSetDevTblEntry(); + goto Fail; +#endif + +FailGetConfDescr: +#ifdef DEBUG_USB_HOST + NotifyFailGetConfDescr(); +#endif + +#ifdef DEBUG_USB_HOST +Fail: + NotifyFail(rcode); +#endif + Release(); + return rcode; +} + +/** + * For driver use only. + * + * @param conf + * @param iface + * @param alt + * @param proto + * @param pep + */ +void BulkOnly::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR * pep) { + ErrorMessage (PSTR("Conf.Val"), conf); + ErrorMessage (PSTR("Iface Num"), iface); + ErrorMessage (PSTR("Alt.Set"), alt); + + bConfNum = conf; + + uint8_t index; + +#if 1 + if((pep->bmAttributes & 0x02) == 2) { + index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex; + // Fill in the endpoint info structure + epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F); + epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize; + epInfo[index].epAttribs = 0; + + bNumEP++; + + PrintEndpointDescriptor(pep); + + } +#else + if((pep->bmAttributes & 0x03) == 3 && (pep->bEndpointAddress & 0x80) == 0x80) + index = epInterruptInIndex; + else + if((pep->bmAttributes & 0x02) == 2) + index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex; + else + return; + + // Fill in the endpoint info structure + epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F); + epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize; + epInfo[index].epAttribs = 0; + + bNumEP++; + + PrintEndpointDescriptor(pep); +#endif +} + +/** + * For driver use only. + * + * @return + */ +uint8_t BulkOnly::Release() { + ClearAllEP(); + pUsb->GetAddressPool().FreeAddress(bAddress); + return 0; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return true if LUN is ready for use. + */ +bool BulkOnly::CheckLUN(uint8_t lun) { + uint8_t rcode; + Capacity capacity; + for(uint8_t i = 0; i < 8; i++) capacity.data[i] = 0; + + rcode = ReadCapacity10(lun, (uint8_t*)capacity.data); + if(rcode) { + //printf(">>>>>>>>>>>>>>>>ReadCapacity returned %i\r\n", rcode); + return false; + } + ErrorMessage (PSTR(">>>>>>>>>>>>>>>>CAPACITY OK ON LUN"), lun); + for(uint8_t i = 0; i < 8 /*sizeof (Capacity)*/; i++) + D_PrintHex (capacity.data[i], 0x80); + Notify(PSTR("\r\n\r\n"), 0x80); + // Only 512/1024/2048/4096 are valid values! + uint32_t c = BMAKE32(capacity.data[4], capacity.data[5], capacity.data[6], capacity.data[7]); + if(c != 0x0200LU && c != 0x0400LU && c != 0x0800LU && c != 0x1000LU) { + return false; + } + // Store capacity information. + CurrentSectorSize[lun] = (uint16_t)(c); // & 0xFFFF); + + CurrentCapacity[lun] = BMAKE32(capacity.data[0], capacity.data[1], capacity.data[2], capacity.data[3]) + 1; + if(CurrentCapacity[lun] == /*0xffffffffLU */ 0x01LU || CurrentCapacity[lun] == 0x00LU) { + // Buggy firmware will report 0xffffffff or 0 for no media + if(CurrentCapacity[lun]) + ErrorMessage (PSTR(">>>>>>>>>>>>>>>>BUGGY FIRMWARE. CAPACITY FAIL ON LUN"), lun); + return false; + } + delay(20); + Page3F(lun); + if(!TestUnitReady(lun)) return true; + return false; +} + +/** + * For driver use only. + * + * Scan for media change on all LUNs + */ +void BulkOnly::CheckMedia() { + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(TestUnitReady(lun)) { + LUNOk[lun] = false; + continue; + } + if(!LUNOk[lun]) + LUNOk[lun] = CheckLUN(lun); + } +#if 0 + printf("}}}}}}}}}}}}}}}}STATUS "); + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(LUNOk[lun]) + printf("#"); + else printf("."); + } + printf("\r\n"); +#endif + qNextPollTime = millis() + 2000; +} + +/** + * For driver use only. + * + * @return + */ +uint8_t BulkOnly::Poll() { + //uint8_t rcode = 0; + + if(!bPollEnable) + return 0; + + if((long)(millis() - qNextPollTime) >= 0L) { + CheckMedia(); + } + //rcode = 0; + + return 0; +} + +//////////////////////////////////////////////////////////////////////////////// + + +// SCSI code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * For driver use only. + * + * @param plun + * @return + */ +uint8_t BulkOnly::GetMaxLUN(uint8_t *plun) { + uint8_t ret = pUsb->ctrlReq(bAddress, 0, bmREQ_MASSIN, MASS_REQ_GET_MAX_LUN, 0, 0, bIface, 1, 1, plun, NULL); + + if(ret == hrSTALL) + *plun = 0; + + return 0; +} + +/** + * For driver use only. Used during Driver Init + * + * @param lun Logical Unit Number + * @param bsize + * @param buf + * @return + */ +uint8_t BulkOnly::Inquiry(uint8_t lun, uint16_t bsize, uint8_t *buf) { + Notify(PSTR("\r\nInquiry\r\n"), 0x80); + Notify(PSTR("---------\r\n"), 0x80); + + CDB6_t cdb = CDB6_t(SCSI_CMD_INQUIRY, lun, 0LU, (uint8_t)bsize, 0); + uint8_t rc = SCSITransaction6(&cdb, bsize, buf, (uint8_t)MASS_CMD_DIR_IN); + + return rc; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return + */ +uint8_t BulkOnly::TestUnitReady(uint8_t lun) { + //SetCurLUN(lun); + if(!bAddress) + return MASS_ERR_UNIT_NOT_READY; + + Notify(PSTR("\r\nTestUnitReady\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + + CDB6_t cdb = CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint8_t)0, 0); + return SCSITransaction6(&cdb, 0, NULL, (uint8_t)MASS_CMD_DIR_IN); + +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param pc + * @param page + * @param subpage + * @param len + * @param pbuf + * @return + */ +uint8_t BulkOnly::ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t * pbuf) { + Notify(PSTR("\r\rModeSense\r\n"), 0x80); + Notify(PSTR("------------\r\n"), 0x80); + + CDB6_t cdb = CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint32_t)((((pc << 6) | page) << 8) | subpage), len, 0); + return SCSITransaction6(&cdb, len, pbuf, (uint8_t)MASS_CMD_DIR_IN); +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param bsize + * @param buf + * @return + */ +uint8_t BulkOnly::ReadCapacity10(uint8_t lun, uint8_t *buf) { + Notify(PSTR("\r\nReadCapacity\r\n"), 0x80); + Notify(PSTR("---------------\r\n"), 0x80); + + CDB10_t cdb = CDB10_t(SCSI_CMD_READ_CAPACITY_10, lun); + return SCSITransaction10(&cdb, 8, buf, (uint8_t)MASS_CMD_DIR_IN); +} + +/** + * For driver use only. + * + * Page 3F contains write protect status. + * + * @param lun Logical Unit Number to test. + * @return Write protect switch status. + */ +uint8_t BulkOnly::Page3F(uint8_t lun) { + uint8_t buf[192]; + for(int i = 0; i < 192; i++) { + buf[i] = 0x00; + } + WriteOk[lun] = true; + uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf); + if(!rc) { + WriteOk[lun] = ((buf[2] & 0x80) == 0); + Notify(PSTR("Mode Sense: "), 0x80); + for(int i = 0; i < 4; i++) { + D_PrintHex (buf[i], 0x80); + Notify(PSTR(" "), 0x80); + } + Notify(PSTR("\r\n"), 0x80); + } + return rc; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param size + * @param buf + * @return + */ +uint8_t BulkOnly::RequestSense(uint8_t lun, uint16_t size, uint8_t *buf) { + Notify(PSTR("\r\nRequestSense\r\n"), 0x80); + Notify(PSTR("----------------\r\n"), 0x80); + + CDB6_t cdb = CDB6_t(SCSI_CMD_REQUEST_SENSE, lun, 0LU, (uint8_t)size, 0); + CommandBlockWrapper cbw = CommandBlockWrapper(++dCBWTag, (uint32_t)size, &cdb, (uint8_t)MASS_CMD_DIR_IN); + //SetCurLUN(lun); + return Transaction(&cbw, size, buf); +} + + +//////////////////////////////////////////////////////////////////////////////// + + +// USB code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * For driver use only. + * + * @param index + * @return + */ +uint8_t BulkOnly::ClearEpHalt(uint8_t index) { + if(index == 0) + return 0; + + uint8_t ret = 0; + + while((ret = (pUsb->ctrlReq(bAddress, 0, USB_SETUP_HOST_TO_DEVICE | USB_SETUP_TYPE_STANDARD | USB_SETUP_RECIPIENT_ENDPOINT, USB_REQUEST_CLEAR_FEATURE, USB_FEATURE_ENDPOINT_HALT, 0, ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr), 0, 0, NULL, NULL)) == 0x01)) + delay(6); + + if(ret) { + ErrorMessage (PSTR("ClearEpHalt"), ret); + ErrorMessage (PSTR("EP"), ((index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr)); + return ret; + } + epInfo[index].bmSndToggle = 0; + epInfo[index].bmRcvToggle = 0; + // epAttribs = 0; + return 0; +} + +/** + * For driver use only. + * + */ +void BulkOnly::Reset() { + while(pUsb->ctrlReq(bAddress, 0, bmREQ_MASSOUT, MASS_REQ_BOMSR, 0, 0, bIface, 0, 0, NULL, NULL) == 0x01) delay(6); +} + +/** + * For driver use only. + * + * @return 0 if successful + */ +uint8_t BulkOnly::ResetRecovery() { + Notify(PSTR("\r\nResetRecovery\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + + delay(6); + Reset(); + delay(6); + ClearEpHalt(epDataInIndex); + delay(6); + bLastUsbError = ClearEpHalt(epDataOutIndex); + delay(6); + return bLastUsbError; +} + +/** + * For driver use only. + * + * Clear all EP data and clear all LUN status + */ +void BulkOnly::ClearAllEP() { + for(uint8_t i = 0; i < MASS_MAX_ENDPOINTS; i++) { + epInfo[i].epAddr = 0; + epInfo[i].maxPktSize = (i) ? 0 : 8; + epInfo[i].epAttribs = 0; + + epInfo[i].bmNakPower = USB_NAK_DEFAULT; + } + + for(uint8_t i = 0; i < MASS_MAX_SUPPORTED_LUN; i++) { + LUNOk[i] = false; + WriteOk[i] = false; + CurrentCapacity[i] = 0lu; + CurrentSectorSize[i] = 0; + } + + bIface = 0; + bNumEP = 1; + bAddress = 0; + qNextPollTime = 0; + bPollEnable = false; + bLastUsbError = 0; + bMaxLUN = 0; + bTheLUN = 0; +} + +/** + * For driver use only. + * + * @param pcsw + * @param pcbw + * @return + */ +bool BulkOnly::IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw) { + if(pcsw->dCSWSignature != MASS_CSW_SIGNATURE) { + Notify(PSTR("CSW:Sig error\r\n"), 0x80); + return false; + } + if(pcsw->dCSWTag != pcbw->dCBWTag) { + Notify(PSTR("CSW:Wrong tag\r\n"), 0x80); + return false; + } + return true; +} + +/** + * For driver use only. + * + * @param error + * @param index + * @return + */ +uint8_t BulkOnly::HandleUsbError(uint8_t error, uint8_t index) { + uint8_t count = 3; + + bLastUsbError = error; + //if (error) + //ClearEpHalt(index); + while(error && count) { + if(error != hrSUCCESS) { + ErrorMessage (PSTR("USB Error"), error); + ErrorMessage (PSTR("Index"), index); + } + switch(error) { + // case hrWRONGPID: + case hrSUCCESS: + return MASS_ERR_SUCCESS; + case hrBUSY: + // SIE is busy, just hang out and try again. + return MASS_ERR_UNIT_BUSY; + case hrTIMEOUT: + case hrJERR: return MASS_ERR_DEVICE_DISCONNECTED; + case hrSTALL: + if(index == 0) + return MASS_ERR_STALL; + ClearEpHalt(index); + if(index != epDataInIndex) + return MASS_ERR_WRITE_STALL; + return MASS_ERR_STALL; + + case hrNAK: + if(index == 0) + return MASS_ERR_UNIT_BUSY; + return MASS_ERR_UNIT_BUSY; + + case hrTOGERR: + // Handle a very super rare corner case, where toggles become de-synched. + // I have only ran into one device that has this firmware bug, and this is + // the only clean way to get back into sync with the buggy device firmware. + // --AJK + if(bAddress && bConfNum) { + error = pUsb->setConf(bAddress, 0, bConfNum); + + if(error) + break; + } + return MASS_ERR_SUCCESS; + default: + ErrorMessage (PSTR("\r\nUSB"), error); + return MASS_ERR_GENERAL_USB_ERROR; + } + count--; + } // while + + return ((error && !count) ? MASS_ERR_GENERAL_USB_ERROR : MASS_ERR_SUCCESS); +} + +#if MS_WANT_PARSER + +uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf) { + return Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf, 0); +} +#endif + +/** + * For driver use only. + * + * @param pcbw + * @param buf_size + * @param buf + * @param flags + * @return + */ +uint8_t BulkOnly::Transaction(CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf +#if MS_WANT_PARSER + , uint8_t flags +#endif + ) { + +#if MS_WANT_PARSER + uint16_t bytes = (pcbw->dCBWDataTransferLength > buf_size) ? buf_size : pcbw->dCBWDataTransferLength; + printf("Transfersize %i\r\n", bytes); + delay(1000); + + bool callback = (flags & MASS_TRANS_FLG_CALLBACK) == MASS_TRANS_FLG_CALLBACK; +#else + uint16_t bytes = buf_size; +#endif + bool write = (pcbw->bmCBWFlags & MASS_CMD_DIR_IN) != MASS_CMD_DIR_IN; + uint8_t ret = 0; + uint8_t usberr; + CommandStatusWrapper csw; // up here, we allocate ahead to save cpu cycles. + SetCurLUN(pcbw->bmCBWLUN); + ErrorMessage (PSTR("CBW.dCBWTag"), pcbw->dCBWTag); + + while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw)) == hrBUSY) delay(1); + + ret = HandleUsbError(usberr, epDataOutIndex); + //ret = HandleUsbError(pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (CommandBlockWrapper), (uint8_t*)pcbw), epDataOutIndex); + if(ret) { + ErrorMessage (PSTR("============================ CBW"), ret); + } else { + if(bytes) { + if(!write) { +#if MS_WANT_PARSER + if(callback) { + uint8_t rbuf[bytes]; + while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, rbuf)) == hrBUSY) delay(1); + if(usberr == hrSUCCESS) ((USBReadParser*)buf)->Parse(bytes, rbuf, 0); + } else { +#endif + while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*)buf)) == hrBUSY) delay(1); +#if MS_WANT_PARSER + + } +#endif + ret = HandleUsbError(usberr, epDataInIndex); + } else { + while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, bytes, (uint8_t*)buf)) == hrBUSY) delay(1); + ret = HandleUsbError(usberr, epDataOutIndex); + } + if(ret) { + ErrorMessage (PSTR("============================ DAT"), ret); + } + } + } + + { + bytes = sizeof (CommandStatusWrapper); + int tries = 2; + while(tries--) { + while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*) & csw)) == hrBUSY) delay(1); + if(!usberr) break; + ClearEpHalt(epDataInIndex); + if(tries) ResetRecovery(); + } + if(!ret) { + Notify(PSTR("CBW:\t\tOK\r\n"), 0x80); + Notify(PSTR("Data Stage:\tOK\r\n"), 0x80); + } else { + // Throw away csw, IT IS NOT OF ANY USE. + ResetRecovery(); + return ret; + } + ret = HandleUsbError(usberr, epDataInIndex); + if(ret) { + ErrorMessage (PSTR("============================ CSW"), ret); + } + if(usberr == hrSUCCESS) { + if(IsValidCSW(&csw, pcbw)) { + //ErrorMessage (PSTR("CSW.dCBWTag"), csw.dCSWTag); + //ErrorMessage (PSTR("bCSWStatus"), csw.bCSWStatus); + //ErrorMessage (PSTR("dCSWDataResidue"), csw.dCSWDataResidue); + Notify(PSTR("CSW:\t\tOK\r\n\r\n"), 0x80); + return csw.bCSWStatus; + } else { + // NOTE! Sometimes this is caused by the reported residue being wrong. + // Get a different device. It isn't compliant, and should have never passed Q&A. + // I own one... 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter. + // Other devices that exhibit this behavior exist in the wild too. + // Be sure to check quirks in the Linux source code before reporting a bug. --xxxajk + Notify(PSTR("Invalid CSW\r\n"), 0x80); + ResetRecovery(); + //return MASS_ERR_SUCCESS; + return MASS_ERR_INVALID_CSW; + } + } + } + return ret; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return + */ +uint8_t BulkOnly::SetCurLUN(uint8_t lun) { + if(lun > bMaxLUN) + return MASS_ERR_INVALID_LUN; + bTheLUN = lun; + return MASS_ERR_SUCCESS; +}; + +/** + * For driver use only. + * + * @param status + * @return + */ +uint8_t BulkOnly::HandleSCSIError(uint8_t status) { + uint8_t ret = 0; + + switch(status) { + case 0: return MASS_ERR_SUCCESS; + + case 2: + ErrorMessage (PSTR("Phase Error"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + ResetRecovery(); + return MASS_ERR_GENERAL_SCSI_ERROR; + + case 1: + ErrorMessage (PSTR("SCSI Error"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + RequestSenseResponce rsp; + + ret = RequestSense(bTheLUN, sizeof (RequestSenseResponce), (uint8_t*) & rsp); + + if(ret) { + return MASS_ERR_GENERAL_SCSI_ERROR; + } + ErrorMessage (PSTR("Response Code"), rsp.bResponseCode); + if(rsp.bResponseCode & 0x80) { + Notify(PSTR("Information field: "), 0x80); + for(int i = 0; i < 4; i++) { + D_PrintHex (rsp.CmdSpecificInformation[i], 0x80); + Notify(PSTR(" "), 0x80); + } + Notify(PSTR("\r\n"), 0x80); + } + ErrorMessage (PSTR("Sense Key"), rsp.bmSenseKey); + ErrorMessage (PSTR("Add Sense Code"), rsp.bAdditionalSenseCode); + ErrorMessage (PSTR("Add Sense Qual"), rsp.bAdditionalSenseQualifier); + // warning, this is not testing ASQ, only SK and ASC. + switch(rsp.bmSenseKey) { + case SCSI_S_UNIT_ATTENTION: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_MEDIA_CHANGED: + return MASS_ERR_MEDIA_CHANGED; + default: + return MASS_ERR_UNIT_NOT_READY; + } + case SCSI_S_NOT_READY: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_MEDIUM_NOT_PRESENT: + return MASS_ERR_NO_MEDIA; + default: + return MASS_ERR_UNIT_NOT_READY; + } + case SCSI_S_ILLEGAL_REQUEST: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_LBA_OUT_OF_RANGE: + return MASS_ERR_BAD_LBA; + default: + return MASS_ERR_CMD_NOT_SUPPORTED; + } + default: + return MASS_ERR_GENERAL_SCSI_ERROR; + } + + // case 4: return MASS_ERR_UNIT_BUSY; // Busy means retry later. + // case 0x05/0x14: we stalled out + // case 0x15/0x16: we naked out. + default: + ErrorMessage (PSTR("Gen SCSI Err"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + return status; + } // switch +} + + +//////////////////////////////////////////////////////////////////////////////// + + +// Debugging code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * + * @param ep_ptr + */ +void BulkOnly::PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR * ep_ptr) { + Notify(PSTR("Endpoint descriptor:"), 0x80); + Notify(PSTR("\r\nLength:\t\t"), 0x80); + D_PrintHex (ep_ptr->bLength, 0x80); + Notify(PSTR("\r\nType:\t\t"), 0x80); + D_PrintHex (ep_ptr->bDescriptorType, 0x80); + Notify(PSTR("\r\nAddress:\t"), 0x80); + D_PrintHex (ep_ptr->bEndpointAddress, 0x80); + Notify(PSTR("\r\nAttributes:\t"), 0x80); + D_PrintHex (ep_ptr->bmAttributes, 0x80); + Notify(PSTR("\r\nMaxPktSize:\t"), 0x80); + D_PrintHex (ep_ptr->wMaxPacketSize, 0x80); + Notify(PSTR("\r\nPoll Intrv:\t"), 0x80); + D_PrintHex (ep_ptr->bInterval, 0x80); + Notify(PSTR("\r\n"), 0x80); +} + + +//////////////////////////////////////////////////////////////////////////////// + + +// misc/to kill/to-do + + +//////////////////////////////////////////////////////////////////////////////// + +/* We won't be needing this... */ +uint8_t BulkOnly::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, USBReadParser * prs) { +#if MS_WANT_PARSER + if(!LUNOk[lun]) return MASS_ERR_NO_MEDIA; + Notify(PSTR("\r\nRead (With parser)\r\n"), 0x80); + Notify(PSTR("---------\r\n"), 0x80); + + CommandBlockWrapper cbw = CommandBlockWrapper(); + + cbw.dCBWSignature = MASS_CBW_SIGNATURE; + cbw.dCBWTag = ++dCBWTag; + cbw.dCBWDataTransferLength = ((uint32_t)bsize * blocks); + cbw.bmCBWFlags = MASS_CMD_DIR_IN, + cbw.bmCBWLUN = lun; + cbw.bmCBWCBLength = 10; + + cbw.CBWCB[0] = SCSI_CMD_READ_10; + cbw.CBWCB[8] = blocks; + cbw.CBWCB[2] = ((addr >> 24) & 0xff); + cbw.CBWCB[3] = ((addr >> 16) & 0xff); + cbw.CBWCB[4] = ((addr >> 8) & 0xff); + cbw.CBWCB[5] = (addr & 0xff); + + return HandleSCSIError(Transaction(&cbw, bsize, prs, 1)); +#else + return MASS_ERR_NOT_IMPLEMENTED; +#endif +} -- cgit v1.2.3