From 1bb7af4d446174b7181c9bb22dbd14c93642ea10 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Tue, 17 Aug 2021 23:43:09 +0100 Subject: Relocate platform specific drivers (#13894) * Relocate platform specific drivers * Move stm eeprom * Tidy up slightly --- platforms/avr/drivers/analog.c | 138 ++++++++++ platforms/avr/drivers/analog.h | 53 ++++ platforms/avr/drivers/glcdfont.c | 23 ++ platforms/avr/drivers/hd44780.c | 536 +++++++++++++++++++++++++++++++++++++ platforms/avr/drivers/hd44780.h | 348 ++++++++++++++++++++++++ platforms/avr/drivers/i2c_master.c | 241 +++++++++++++++++ platforms/avr/drivers/i2c_master.h | 43 +++ platforms/avr/drivers/i2c_slave.c | 111 ++++++++ platforms/avr/drivers/i2c_slave.h | 41 +++ platforms/avr/drivers/serial.c | 529 ++++++++++++++++++++++++++++++++++++ platforms/avr/drivers/spi_master.c | 180 +++++++++++++ platforms/avr/drivers/spi_master.h | 59 ++++ platforms/avr/drivers/ssd1306.c | 319 ++++++++++++++++++++++ platforms/avr/drivers/ssd1306.h | 87 ++++++ platforms/avr/drivers/uart.c | 170 ++++++++++++ platforms/avr/drivers/uart.h | 35 +++ platforms/avr/drivers/ws2812.c | 176 ++++++++++++ platforms/avr/drivers/ws2812_i2c.c | 27 ++ 18 files changed, 3116 insertions(+) create mode 100644 platforms/avr/drivers/analog.c create mode 100644 platforms/avr/drivers/analog.h create mode 100644 platforms/avr/drivers/glcdfont.c create mode 100644 platforms/avr/drivers/hd44780.c create mode 100644 platforms/avr/drivers/hd44780.h create mode 100644 platforms/avr/drivers/i2c_master.c create mode 100644 platforms/avr/drivers/i2c_master.h create mode 100644 platforms/avr/drivers/i2c_slave.c create mode 100644 platforms/avr/drivers/i2c_slave.h create mode 100644 platforms/avr/drivers/serial.c create mode 100644 platforms/avr/drivers/spi_master.c create mode 100644 platforms/avr/drivers/spi_master.h create mode 100644 platforms/avr/drivers/ssd1306.c create mode 100644 platforms/avr/drivers/ssd1306.h create mode 100644 platforms/avr/drivers/uart.c create mode 100644 platforms/avr/drivers/uart.h create mode 100644 platforms/avr/drivers/ws2812.c create mode 100644 platforms/avr/drivers/ws2812_i2c.c (limited to 'platforms/avr') diff --git a/platforms/avr/drivers/analog.c b/platforms/avr/drivers/analog.c new file mode 100644 index 0000000000..8d299ffdb9 --- /dev/null +++ b/platforms/avr/drivers/analog.c @@ -0,0 +1,138 @@ +/* Copyright 2015 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include "analog.h" + +static uint8_t aref = ADC_REF_POWER; + +void analogReference(uint8_t mode) { aref = mode & (_BV(REFS1) | _BV(REFS0)); } + +// Arduino compatible pin input +int16_t analogRead(uint8_t pin) { +#if defined(__AVR_ATmega32U4__) + // clang-format off + static const uint8_t PROGMEM pin_to_mux[] = { + //A0 A1 A2 A3 A4 A5 + //F7 F6 F5 F4 F1 F0 + 0x07, 0x06, 0x05, 0x04, 0x01, 0x00, + //A6 A7 A8 A9 A10 A11 + //D4 D7 B4 B5 B6 D6 + 0x20, 0x22, 0x23, 0x24, 0x25, 0x21 + }; + // clang-format on + if (pin >= 12) return 0; + return adc_read(pgm_read_byte(pin_to_mux + pin)); +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) + if (pin >= 8) return 0; + return adc_read(pin); +#else + return 0; +#endif +} + +int16_t analogReadPin(pin_t pin) { return adc_read(pinToMux(pin)); } + +uint8_t pinToMux(pin_t pin) { + switch (pin) { + // clang-format off +#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) + case F0: return 0; // ADC0 + case F1: return _BV(MUX0); // ADC1 + case F2: return _BV(MUX1); // ADC2 + case F3: return _BV(MUX1) | _BV(MUX0); // ADC3 + case F4: return _BV(MUX2); // ADC4 + case F5: return _BV(MUX2) | _BV(MUX0); // ADC5 + case F6: return _BV(MUX2) | _BV(MUX1); // ADC6 + case F7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 + default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V +#elif defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) + case F0: return 0; // ADC0 + case F1: return _BV(MUX0); // ADC1 + case F4: return _BV(MUX2); // ADC4 + case F5: return _BV(MUX2) | _BV(MUX0); // ADC5 + case F6: return _BV(MUX2) | _BV(MUX1); // ADC6 + case F7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 + case D4: return _BV(MUX5); // ADC8 + case D6: return _BV(MUX5) | _BV(MUX0); // ADC9 + case D7: return _BV(MUX5) | _BV(MUX1); // ADC10 + case B4: return _BV(MUX5) | _BV(MUX1) | _BV(MUX0); // ADC11 + case B5: return _BV(MUX5) | _BV(MUX2); // ADC12 + case B6: return _BV(MUX5) | _BV(MUX2) | _BV(MUX0); // ADC13 + default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V +#elif defined(__AVR_ATmega32A__) + case A0: return 0; // ADC0 + case A1: return _BV(MUX0); // ADC1 + case A2: return _BV(MUX1); // ADC2 + case A3: return _BV(MUX1) | _BV(MUX0); // ADC3 + case A4: return _BV(MUX2); // ADC4 + case A5: return _BV(MUX2) | _BV(MUX0); // ADC5 + case A6: return _BV(MUX2) | _BV(MUX1); // ADC6 + case A7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 + default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) + case C0: return 0; // ADC0 + case C1: return _BV(MUX0); // ADC1 + case C2: return _BV(MUX1); // ADC2 + case C3: return _BV(MUX1) | _BV(MUX0); // ADC3 + case C4: return _BV(MUX2); // ADC4 + case C5: return _BV(MUX2) | _BV(MUX0); // ADC5 + // ADC7:6 not present in DIP package and not shared by GPIO pins + default: return _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V +#endif + // clang-format on + } + return 0; +} + +int16_t adc_read(uint8_t mux) { + uint16_t low; + + // Enable ADC and configure prescaler + ADCSRA = _BV(ADEN) | ADC_PRESCALER; + +#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) + // High speed mode and ADC8-13 + ADCSRB = _BV(ADHSM) | (mux & _BV(MUX5)); +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) + // High speed mode only + ADCSRB = _BV(ADHSM); +#endif + + // Configure mux input +#if defined(MUX4) + ADMUX = aref | (mux & (_BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0))); +#else + ADMUX = aref | (mux & (_BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0))); +#endif + + // Start the conversion + ADCSRA |= _BV(ADSC); + // Wait for result + while (ADCSRA & _BV(ADSC)) + ; + // Must read LSB first + low = ADCL; + // Must read MSB only once! + low |= (ADCH << 8); + + // turn off the ADC + ADCSRA &= ~(1 << ADEN); + + return low; +} diff --git a/platforms/avr/drivers/analog.h b/platforms/avr/drivers/analog.h new file mode 100644 index 0000000000..058882450d --- /dev/null +++ b/platforms/avr/drivers/analog.h @@ -0,0 +1,53 @@ +/* Copyright 2015 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include +#include "quantum.h" + +#ifdef __cplusplus +extern "C" { +#endif +void analogReference(uint8_t mode); +int16_t analogRead(uint8_t pin); + +int16_t analogReadPin(pin_t pin); +uint8_t pinToMux(pin_t pin); + +int16_t adc_read(uint8_t mux); +#ifdef __cplusplus +} +#endif + +#define ADC_REF_EXTERNAL 0 // AREF, Internal Vref turned off +#define ADC_REF_POWER _BV(REFS0) // AVCC with external capacitor on AREF pin +#define ADC_REF_INTERNAL (_BV(REFS1) | _BV(REFS0)) // Internal 2.56V Voltage Reference with external capacitor on AREF pin (1.1V for 328P) + +// These prescaler values are for high speed mode, ADHSM = 1 +#if F_CPU == 16000000L || F_CPU == 12000000L +# define ADC_PRESCALER (_BV(ADPS2) | _BV(ADPS1)) // /64 +#elif F_CPU == 8000000L +# define ADC_PRESCALER (_BV(ADPS2) | _BV(ADPS0)) // /32 +#elif F_CPU == 4000000L +# define ADC_PRESCALER (_BV(ADPS2)) // /16 +#elif F_CPU == 2000000L +# define ADC_PRESCALER (_BV(ADPS1) | _BV(ADPS0)) // /8 +#elif F_CPU == 1000000L +# define ADC_PRESCALER _BV(ADPS1) // /4 +#else +# define ADC_PRESCALER _BV(ADPS0) // /2 +#endif diff --git a/platforms/avr/drivers/glcdfont.c b/platforms/avr/drivers/glcdfont.c new file mode 100644 index 0000000000..5e763b054f --- /dev/null +++ b/platforms/avr/drivers/glcdfont.c @@ -0,0 +1,23 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#include "progmem.h" + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut + 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut + 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut + 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut + 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code + 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block + 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block + 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta + 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP +}; diff --git a/platforms/avr/drivers/hd44780.c b/platforms/avr/drivers/hd44780.c new file mode 100644 index 0000000000..f71069dece --- /dev/null +++ b/platforms/avr/drivers/hd44780.c @@ -0,0 +1,536 @@ +/**************************************************************************** + Title: HD44780U LCD library + Author: Peter Fleury http://tinyurl.com/peterfleury + License: GNU General Public License Version 3 + File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $ + Software: AVR-GCC 3.3 + Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega + + DESCRIPTION + Basic routines for interfacing a HD44780U-based text lcd display + + Originally based on Volker Oth's lcd library, + changed lcd_init(), added additional constants for lcd_command(), + added 4-bit I/O mode, improved and optimized code. + + Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in + 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported. + + Memory mapped mode compatible with Kanda STK200, but supports also + generation of R/W signal through A8 address line. + + USAGE + See the C include lcd.h file for a description of each function + +*****************************************************************************/ +#include +#include +#include +#include +#include "hd44780.h" + +/* +** constants/macros +*/ +#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ +#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) +/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ +# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2))) +#else +# define PIN(x) (*(&x - 2)) /* address of input register of port x */ +#endif + +#if LCD_IO_MODE +# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) +# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); +# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); +# define lcd_e_toggle() toggle_e() +# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) +# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) +# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) +# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) +#endif + +#if LCD_IO_MODE +# if LCD_LINES == 1 +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE +# else +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES +# endif +#else +# if LCD_LINES == 1 +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE +# else +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES +# endif +#endif + +#if LCD_CONTROLLER_KS0073 +# if LCD_LINES == 4 + +# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ +# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ +# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ + +# endif +#endif + +/* +** function prototypes +*/ +#if LCD_IO_MODE +static void toggle_e(void); +#endif + +/* +** local functions +*/ + +/************************************************************************* +delay for a minimum of microseconds +the number of loops is calculated at compile-time from MCU clock frequency +*************************************************************************/ +#define delay(us) _delay_us(us) + +#if LCD_IO_MODE +/* toggle Enable Pin to initiate write */ +static void toggle_e(void) { + lcd_e_high(); + lcd_e_delay(); + lcd_e_low(); +} +#endif + +/************************************************************************* +Low-level function to write byte to LCD controller +Input: data byte to write to LCD + rs 1: write data + 0: write instruction +Returns: none +*************************************************************************/ +#if LCD_IO_MODE +static void lcd_write(uint8_t data, uint8_t rs) { + unsigned char dataBits; + + if (rs) { /* write data (RS=1, RW=0) */ + lcd_rs_high(); + } else { /* write instruction (RS=0, RW=0) */ + lcd_rs_low(); + } + lcd_rw_low(); /* RW=0 write mode */ + + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { + /* configure data pins as output */ + DDR(LCD_DATA0_PORT) |= 0x0F; + + /* output high nibble first */ + dataBits = LCD_DATA0_PORT & 0xF0; + LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F); + lcd_e_toggle(); + + /* output low nibble */ + LCD_DATA0_PORT = dataBits | (data & 0x0F); + lcd_e_toggle(); + + /* all data pins high (inactive) */ + LCD_DATA0_PORT = dataBits | 0x0F; + } else { + /* configure data pins as output */ + DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); + DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); + DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); + DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); + + /* output high nibble first */ + LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); + LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); + LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); + if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + lcd_e_toggle(); + + /* output low nibble */ + LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); + LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); + LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); + if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + lcd_e_toggle(); + + /* all data pins high (inactive) */ + LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + } +} +#else +# define lcd_write(d, rs) \ + if (rs) \ + *(volatile uint8_t *)(LCD_IO_DATA) = d; \ + else \ + *(volatile uint8_t *)(LCD_IO_FUNCTION) = d; +/* rs==0 -> write instruction to LCD_IO_FUNCTION */ +/* rs==1 -> write data to LCD_IO_DATA */ +#endif + +/************************************************************************* +Low-level function to read byte from LCD controller +Input: rs 1: read data + 0: read busy flag / address counter +Returns: byte read from LCD controller +*************************************************************************/ +#if LCD_IO_MODE +static uint8_t lcd_read(uint8_t rs) { + uint8_t data; + + if (rs) + lcd_rs_high(); /* RS=1: read data */ + else + lcd_rs_low(); /* RS=0: read busy flag */ + lcd_rw_high(); /* RW=1 read mode */ + + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { + DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ + + lcd_e_high(); + lcd_e_delay(); + data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ + lcd_e_low(); + + lcd_e_delay(); /* Enable 500ns low */ + + lcd_e_high(); + lcd_e_delay(); + data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */ + lcd_e_low(); + } else { + /* configure data pins as input */ + DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN); + DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN); + DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN); + DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN); + + /* read high nibble first */ + lcd_e_high(); + lcd_e_delay(); + data = 0; + if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10; + if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20; + if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40; + if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80; + lcd_e_low(); + + lcd_e_delay(); /* Enable 500ns low */ + + /* read low nibble */ + lcd_e_high(); + lcd_e_delay(); + if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01; + if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02; + if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04; + if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08; + lcd_e_low(); + } + return data; +} +#else +# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ) +/* rs==0 -> read instruction from LCD_IO_FUNCTION */ +/* rs==1 -> read data from LCD_IO_DATA */ +#endif + +/************************************************************************* +loops while lcd is busy, returns address counter +*************************************************************************/ +static uint8_t lcd_waitbusy(void) + +{ + register uint8_t c; + + /* wait until busy flag is cleared */ + while ((c = lcd_read(0)) & (1 << LCD_BUSY)) { + } + + /* the address counter is updated 4us after the busy flag is cleared */ + delay(LCD_DELAY_BUSY_FLAG); + + /* now read the address counter */ + return (lcd_read(0)); // return address counter + +} /* lcd_waitbusy */ + +/************************************************************************* +Move cursor to the start of next line or to the first line if the cursor +is already on the last line. +*************************************************************************/ +static inline void lcd_newline(uint8_t pos) { + register uint8_t addressCounter; + +#if LCD_LINES == 1 + addressCounter = 0; +#endif +#if LCD_LINES == 2 + if (pos < (LCD_START_LINE2)) + addressCounter = LCD_START_LINE2; + else + addressCounter = LCD_START_LINE1; +#endif +#if LCD_LINES == 4 +# if KS0073_4LINES_MODE + if (pos < LCD_START_LINE2) + addressCounter = LCD_START_LINE2; + else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3)) + addressCounter = LCD_START_LINE3; + else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4)) + addressCounter = LCD_START_LINE4; + else + addressCounter = LCD_START_LINE1; +# else + if (pos < LCD_START_LINE3) + addressCounter = LCD_START_LINE2; + else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4)) + addressCounter = LCD_START_LINE3; + else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2)) + addressCounter = LCD_START_LINE4; + else + addressCounter = LCD_START_LINE1; +# endif +#endif + lcd_command((1 << LCD_DDRAM) + addressCounter); + +} /* lcd_newline */ + +/* +** PUBLIC FUNCTIONS +*/ + +/************************************************************************* +Send LCD controller instruction command +Input: instruction to send to LCD controller, see HD44780 data sheet +Returns: none +*************************************************************************/ +void lcd_command(uint8_t cmd) { + lcd_waitbusy(); + lcd_write(cmd, 0); +} + +/************************************************************************* +Send data byte to LCD controller +Input: data to send to LCD controller, see HD44780 data sheet +Returns: none +*************************************************************************/ +void lcd_data(uint8_t data) { + lcd_waitbusy(); + lcd_write(data, 1); +} + +/************************************************************************* +Set cursor to specified position +Input: x horizontal position (0: left most position) + y vertical position (0: first line) +Returns: none +*************************************************************************/ +void lcd_gotoxy(uint8_t x, uint8_t y) { +#if LCD_LINES == 1 + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); +#endif +#if LCD_LINES == 2 + if (y == 0) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); + else + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); +#endif +#if LCD_LINES == 4 + if (y == 0) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); + else if (y == 1) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); + else if (y == 2) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x); + else /* y==3 */ + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x); +#endif + +} /* lcd_gotoxy */ + +/************************************************************************* +*************************************************************************/ +int lcd_getxy(void) { return lcd_waitbusy(); } + +/************************************************************************* +Clear display and set cursor to home position +*************************************************************************/ +void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); } + +/************************************************************************* +Set cursor to home position +*************************************************************************/ +void lcd_home(void) { lcd_command(1 << LCD_HOME); } + +/************************************************************************* +Display character at current cursor position +Input: character to be displayed +Returns: none +*************************************************************************/ +void lcd_putc(char c) { + uint8_t pos; + + pos = lcd_waitbusy(); // read busy-flag and address counter + if (c == '\n') { + lcd_newline(pos); + } else { +#if LCD_WRAP_LINES == 1 +# if LCD_LINES == 1 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); + } +# elif LCD_LINES == 2 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); + } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); + } +# elif LCD_LINES == 4 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); + } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0); + } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0); + } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); + } +# endif + lcd_waitbusy(); +#endif + lcd_write(c, 1); + } + +} /* lcd_putc */ + +/************************************************************************* +Display string without auto linefeed +Input: string to be displayed +Returns: none +*************************************************************************/ +void lcd_puts(const char *s) +/* print string on lcd (no auto linefeed) */ +{ + register char c; + + while ((c = *s++)) { + lcd_putc(c); + } + +} /* lcd_puts */ + +/************************************************************************* +Display string from program memory without auto linefeed +Input: string from program memory be be displayed +Returns: none +*************************************************************************/ +void lcd_puts_p(const char *progmem_s) +/* print string from program memory on lcd (no auto linefeed) */ +{ + register char c; + + while ((c = pgm_read_byte(progmem_s++))) { + lcd_putc(c); + } + +} /* lcd_puts_p */ + +/************************************************************************* +Initialize display and select type of cursor +Input: dispAttr LCD_DISP_OFF display off + LCD_DISP_ON display on, cursor off + LCD_DISP_ON_CURSOR display on, cursor on + LCD_DISP_CURSOR_BLINK display on, cursor on flashing +Returns: none +*************************************************************************/ +void lcd_init(uint8_t dispAttr) { +#if LCD_IO_MODE + /* + * Initialize LCD to 4 bit I/O mode + */ + + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) { + /* configure all port bits as output (all LCD lines on same port) */ + DDR(LCD_DATA0_PORT) |= 0x7F; + } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { + /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */ + DDR(LCD_DATA0_PORT) |= 0x0F; + DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); + DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); + DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); + } else { + /* configure all port bits as output (LCD data and control lines on different ports */ + DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); + DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); + DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); + DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); + DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); + DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); + DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); + } + delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */ + + /* initial write to lcd is 8bit */ + LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4; + LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; + lcd_e_toggle(); + delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ + + /* repeat last command */ + lcd_e_toggle(); + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + + /* repeat last command a third time */ + lcd_e_toggle(); + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + + /* now configure for 4bit mode */ + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 + lcd_e_toggle(); + delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ + + /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ +#else + /* + * Initialize LCD to 8 bit memory mapped mode + */ + + /* enable external SRAM (memory mapped lcd) and one wait state */ + MCUCR = _BV(SRE) | _BV(SRW); + + /* reset LCD */ + delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT); /* wait 5ms */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ +#endif + +#if KS0073_4LINES_MODE + /* Display with KS0073 controller requires special commands for enabling 4 line mode */ + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); + lcd_command(KS0073_4LINES_MODE); + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); +#else + lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ +#endif + lcd_command(LCD_DISP_OFF); /* display off */ + lcd_clrscr(); /* display clear */ + lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ + lcd_command(dispAttr); /* display/cursor control */ + +} /* lcd_init */ diff --git a/platforms/avr/drivers/hd44780.h b/platforms/avr/drivers/hd44780.h new file mode 100644 index 0000000000..08e60f8a44 --- /dev/null +++ b/platforms/avr/drivers/hd44780.h @@ -0,0 +1,348 @@ +/************************************************************************* + Title : C include file for the HD44780U LCD library (lcd.c) + Author: Peter Fleury http://tinyurl.com/peterfleury + License: GNU General Public License Version 3 + File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ + Software: AVR-GCC 4.x + Hardware: any AVR device, memory mapped mode only for AVR with + memory mapped interface (AT90S8515/ATmega8515/ATmega128) +***************************************************************************/ + +/** + @mainpage + Collection of libraries for AVR-GCC + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + + @file + @defgroup pfleury_lcd LCD library + @code #include @endcode + + @brief Basic routines for interfacing a HD44780U-based character LCD display + + LCD character displays can be found in many devices, like espresso machines, laser printers. + The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. + + This library allows easy interfacing with a HD44780 compatible display and can be + operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in + 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. + + Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports + generation of R/W signal through A8 address line. + + @see The chapter Interfacing a HD44780 Based LCD to an AVR + on my home page, which shows example circuits how to connect an LCD to an AVR controller. + + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + + @version 2.0 + + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + +*/ + +#pragma once + +#include +#include + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 +# error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" +#endif + +/**@{*/ + +/* + * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file + * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifdef _LCD_DEFINITIONS_FILE +# include "lcd_definitions.h" +#endif + +/** + * @name Definition for LCD controller type + * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. + */ +#ifndef LCD_CONTROLLER_KS0073 +# define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ +#endif + +/** + * @name Definitions for Display Size + * Change these definitions to adapt setting to your display + * + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#ifndef LCD_LINES +# define LCD_LINES 2 /**< number of visible lines of the display */ +#endif +#ifndef LCD_DISP_LENGTH +# define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ +#endif +#ifndef LCD_LINE_LENGTH +# define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ +#endif +#ifndef LCD_START_LINE1 +# define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ +#endif +#ifndef LCD_START_LINE2 +# define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ +#endif +#ifndef LCD_START_LINE3 +# define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ +#endif +#ifndef LCD_START_LINE4 +# define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ +#endif +#ifndef LCD_WRAP_LINES +# define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ +#endif + +/** + * @name Definitions for 4-bit IO mode + * + * The four LCD data lines and the three control lines RS, RW, E can be on the + * same port or on different ports. + * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on + * different ports. + * + * Normally the four data lines should be mapped to bit 0..3 on one port, but it + * is possible to connect these data lines in different order or even on different + * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. + * + * Adjust these definitions to your target.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ + +#if LCD_IO_MODE + +# ifndef LCD_PORT +# define LCD_PORT PORTA /**< port for the LCD lines */ +# endif +# ifndef LCD_DATA0_PORT +# define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ +# endif +# ifndef LCD_DATA1_PORT +# define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ +# endif +# ifndef LCD_DATA2_PORT +# define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ +# endif +# ifndef LCD_DATA3_PORT +# define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ +# endif +# ifndef LCD_DATA0_PIN +# define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ +# endif +# ifndef LCD_DATA1_PIN +# define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ +# endif +# ifndef LCD_DATA2_PIN +# define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ +# endif +# ifndef LCD_DATA3_PIN +# define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ +# endif +# ifndef LCD_RS_PORT +# define LCD_RS_PORT LCD_PORT /**< port for RS line */ +# endif +# ifndef LCD_RS_PIN +# define LCD_RS_PIN 3 /**< pin for RS line */ +# endif +# ifndef LCD_RW_PORT +# define LCD_RW_PORT LCD_PORT /**< port for RW line */ +# endif +# ifndef LCD_RW_PIN +# define LCD_RW_PIN 2 /**< pin for RW line */ +# endif +# ifndef LCD_E_PORT +# define LCD_E_PORT LCD_PORT /**< port for Enable line */ +# endif +# ifndef LCD_E_PIN +# define LCD_E_PIN 1 /**< pin for Enable line */ +# endif + +#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) +/* + * memory mapped mode is only supported when the device has an external data memory interface + */ +# define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ +# define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ +# define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ + +#else +# error "external data memory interface not available for this device, use 4-bit IO port mode" + +#endif + +/** + * @name Definitions of delays + * Used to calculate delay timers. + * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target + * + * These delay times can be adjusted, if some displays require different delays.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifndef LCD_DELAY_BOOTUP +# define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ +#endif +#ifndef LCD_DELAY_INIT +# define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ +#endif +#ifndef LCD_DELAY_INIT_REP +# define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ +#endif +#ifndef LCD_DELAY_INIT_4BIT +# define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ +#endif +#ifndef LCD_DELAY_BUSY_FLAG +# define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ +#endif +#ifndef LCD_DELAY_ENABLE_PULSE +# define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ +#endif + +/** + * @name Definitions for LCD command instructions + * The constants define the various LCD controller instructions which can be passed to the + * function lcd_command(), see HD44780 data sheet for a complete description. + */ + +/* instruction register bit positions, see HD44780U data sheet */ +#define LCD_CLR 0 /* DB0: clear display */ +#define LCD_HOME 1 /* DB1: return to home position */ +#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ +#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ +#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ +#define LCD_ON 3 /* DB3: turn lcd/cursor on */ +#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ +#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ +#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ +#define LCD_MOVE 4 /* DB4: move cursor/display */ +#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ +#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ +#define LCD_FUNCTION 5 /* DB5: function set */ +#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ +#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ +#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ +#define LCD_CGRAM 6 /* DB6: set CG RAM address */ +#define LCD_DDRAM 7 /* DB7: set DD RAM address */ +#define LCD_BUSY 7 /* DB7: LCD is busy */ + +/* set entry mode: display shift on/off, dec/inc cursor move direction */ +#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ +#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ +#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ +#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ + +/* display on/off, cursor on/off, blinking char at cursor position */ +#define LCD_DISP_OFF 0x08 /* display off */ +#define LCD_DISP_ON 0x0C /* display on, cursor off */ +#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ +#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ +#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ + +/* move cursor/shift display */ +#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ +#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ +#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ +#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ + +/* function set: set interface data length and number of display lines */ +#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ + +#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC)) + +/** + * @name Functions + */ + +/** + @brief Initialize display and select type of cursor + @param dispAttr \b LCD_DISP_OFF display off\n + \b LCD_DISP_ON display on, cursor off\n + \b LCD_DISP_ON_CURSOR display on, cursor on\n + \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing + @return none +*/ +extern void lcd_init(uint8_t dispAttr); + +/** + @brief Clear display and set cursor to home position + @return none +*/ +extern void lcd_clrscr(void); + +/** + @brief Set cursor to home position + @return none +*/ +extern void lcd_home(void); + +/** + @brief Set cursor to specified position + + @param x horizontal position\n (0: left most position) + @param y vertical position\n (0: first line) + @return none +*/ +extern void lcd_gotoxy(uint8_t x, uint8_t y); + +/** + @brief Display character at current cursor position + @param c character to be displayed + @return none +*/ +extern void lcd_putc(char c); + +/** + @brief Display string without auto linefeed + @param s string to be displayed + @return none +*/ +extern void lcd_puts(const char *s); + +/** + @brief Display string from program memory without auto linefeed + @param progmem_s string from program memory be be displayed + @return none + @see lcd_puts_P +*/ +extern void lcd_puts_p(const char *progmem_s); + +/** + @brief Send LCD controller instruction command + @param cmd instruction to send to LCD controller, see HD44780 data sheet + @return none +*/ +extern void lcd_command(uint8_t cmd); + +/** + @brief Send data byte to LCD controller + + Similar to lcd_putc(), but without interpreting LF + @param data byte to send to LCD controller, see HD44780 data sheet + @return none +*/ +extern void lcd_data(uint8_t data); + +/** + @brief macros for automatically storing string constant in program memory +*/ +#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) + +/**@}*/ diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c new file mode 100644 index 0000000000..2773e00778 --- /dev/null +++ b/platforms/avr/drivers/i2c_master.c @@ -0,0 +1,241 @@ +/* Copyright (C) 2019 Elia Ritterbusch + + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +/* Library made by: g4lvanix + * GitHub repository: https://github.com/g4lvanix/I2C-master-lib + */ + +#include +#include + +#include "i2c_master.h" +#include "timer.h" +#include "wait.h" + +#ifndef F_SCL +# define F_SCL 400000UL // SCL frequency +#endif + +#ifndef I2C_START_RETRY_COUNT +# define I2C_START_RETRY_COUNT 20 +#endif // I2C_START_RETRY_COUNT + +#define TWBR_val (((F_CPU / F_SCL) - 16) / 2) + +#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) + +void i2c_init(void) { + TWSR = 0; /* no prescaler */ + TWBR = (uint8_t)TWBR_val; + +#ifdef __AVR_ATmega32A__ + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +#endif +} + +static i2c_status_t i2c_start_impl(uint8_t address, uint16_t timeout) { + // reset TWI control register + TWCR = 0; + // transmit START condition + TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // check if the start condition was successfully transmitted + if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) { + return I2C_STATUS_ERROR; + } + + // load slave address into data register + TWDR = address; + // start transmission of address + TWCR = (1 << TWINT) | (1 << TWEN); + + timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // check if the device has acknowledged the READ / WRITE mode + uint8_t twst = TW_STATUS & 0xF8; + if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { + return I2C_STATUS_ERROR; + } + + return I2C_STATUS_SUCCESS; +} + +i2c_status_t i2c_start(uint8_t address, uint16_t timeout) { + // Retry i2c_start_impl a bunch times in case the remote side has interrupts disabled. + uint16_t timeout_timer = timer_read(); + uint16_t time_slice = MAX(1, (timeout == (I2C_TIMEOUT_INFINITE)) ? 5 : (timeout / (I2C_START_RETRY_COUNT))); // if it's infinite, wait 1ms between attempts, otherwise split up the entire timeout into the number of retries + i2c_status_t status; + do { + status = i2c_start_impl(address, time_slice); + } while ((status < 0) && ((timeout == I2C_TIMEOUT_INFINITE) || (timer_elapsed(timeout_timer) < timeout))); + return status; +} + +i2c_status_t i2c_write(uint8_t data, uint16_t timeout) { + // load data into data register + TWDR = data; + // start transmission of data + TWCR = (1 << TWINT) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) { + return I2C_STATUS_ERROR; + } + + return I2C_STATUS_SUCCESS; +} + +int16_t i2c_read_ack(uint16_t timeout) { + // start TWI module and acknowledge data after reception + TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // return received data from TWDR + return TWDR; +} + +int16_t i2c_read_nack(uint16_t timeout) { + // start receiving without acknowledging reception + TWCR = (1 << TWINT) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // return received data from TWDR + return TWDR; +} + +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(data[i], timeout); + } + + i2c_stop(); + + return status; +} + +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(address | I2C_READ, timeout); + + for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { + status = i2c_read_ack(timeout); + if (status >= 0) { + data[i] = status; + } + } + + if (status >= 0) { + status = i2c_read_nack(timeout); + if (status >= 0) { + data[(length - 1)] = status; + } + } + + i2c_stop(); + + return (status < 0) ? status : I2C_STATUS_SUCCESS; +} + +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(devaddr | 0x00, timeout); + if (status >= 0) { + status = i2c_write(regaddr, timeout); + + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(data[i], timeout); + } + } + + i2c_stop(); + + return status; +} + +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(devaddr, timeout); + if (status < 0) { + goto error; + } + + status = i2c_write(regaddr, timeout); + if (status < 0) { + goto error; + } + + status = i2c_start(devaddr | 0x01, timeout); + + for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { + status = i2c_read_ack(timeout); + if (status >= 0) { + data[i] = status; + } + } + + if (status >= 0) { + status = i2c_read_nack(timeout); + if (status >= 0) { + data[(length - 1)] = status; + } + } + +error: + i2c_stop(); + + return (status < 0) ? status : I2C_STATUS_SUCCESS; +} + +void i2c_stop(void) { + // transmit STOP condition + TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); +} diff --git a/platforms/avr/drivers/i2c_master.h b/platforms/avr/drivers/i2c_master.h new file mode 100644 index 0000000000..e5af73364b --- /dev/null +++ b/platforms/avr/drivers/i2c_master.h @@ -0,0 +1,43 @@ +/* Copyright (C) 2019 Elia Ritterbusch + + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +/* Library made by: g4lvanix + * GitHub repository: https://github.com/g4lvanix/I2C-master-lib + */ + +#pragma once + +#define I2C_READ 0x01 +#define I2C_WRITE 0x00 + +typedef int16_t i2c_status_t; + +#define I2C_STATUS_SUCCESS (0) +#define I2C_STATUS_ERROR (-1) +#define I2C_STATUS_TIMEOUT (-2) + +#define I2C_TIMEOUT_IMMEDIATE (0) +#define I2C_TIMEOUT_INFINITE (0xFFFF) + +void i2c_init(void); +i2c_status_t i2c_start(uint8_t address, uint16_t timeout); +i2c_status_t i2c_write(uint8_t data, uint16_t timeout); +int16_t i2c_read_ack(uint16_t timeout); +int16_t i2c_read_nack(uint16_t timeout); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +void i2c_stop(void); diff --git a/platforms/avr/drivers/i2c_slave.c b/platforms/avr/drivers/i2c_slave.c new file mode 100644 index 0000000000..2907f164c0 --- /dev/null +++ b/platforms/avr/drivers/i2c_slave.c @@ -0,0 +1,111 @@ +/* Copyright (C) 2019 Elia Ritterbusch + + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +/* Library made by: g4lvanix + * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib + */ + +#include +#include +#include +#include +#include + +#include "i2c_slave.h" + +#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) +# include "transactions.h" + +static volatile bool is_callback_executor = false; +#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + +volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; + +static volatile uint8_t buffer_address; +static volatile bool slave_has_register_set = false; + +void i2c_slave_init(uint8_t address) { + // load address into TWI address register + TWAR = address; + // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt + TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN); +} + +void i2c_slave_stop(void) { + // clear acknowledge and enable bits + TWCR &= ~((1 << TWEA) | (1 << TWEN)); +} + +ISR(TWI_vect) { + uint8_t ack = 1; + + switch (TW_STATUS) { + case TW_SR_SLA_ACK: + // The device is now a slave receiver + slave_has_register_set = false; +#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + is_callback_executor = false; +#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + break; + + case TW_SR_DATA_ACK: + // This device is a slave receiver and has received data + // First byte is the location then the bytes will be writen in buffer with auto-increment + if (!slave_has_register_set) { + buffer_address = TWDR; + + if (buffer_address >= I2C_SLAVE_REG_COUNT) { // address out of bounds dont ack + ack = 0; + buffer_address = 0; + } + slave_has_register_set = true; // address has been received now fill in buffer + +#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + // Work out if we're attempting to execute a callback + is_callback_executor = buffer_address == split_transaction_table[I2C_EXECUTE_CALLBACK].initiator2target_offset; +#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + } else { + i2c_slave_reg[buffer_address] = TWDR; + buffer_address++; + +#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + // If we're intending to execute a transaction callback, do so, as we've just received the transaction ID + if (is_callback_executor) { + split_transaction_desc_t *trans = &split_transaction_table[split_shmem->transaction_id]; + if (trans->slave_callback) { + trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans)); + } + } +#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // This device is a slave transmitter and master has requested data + TWDR = i2c_slave_reg[buffer_address]; + buffer_address++; + break; + + case TW_BUS_ERROR: + // We got an error, reset i2c + TWCR = 0; + default: + break; + } + + // Reset i2c state machine to be ready for next interrupt + TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN); +} diff --git a/platforms/avr/drivers/i2c_slave.h b/platforms/avr/drivers/i2c_slave.h new file mode 100644 index 0000000000..a8647c9da3 --- /dev/null +++ b/platforms/avr/drivers/i2c_slave.h @@ -0,0 +1,41 @@ +/* Copyright (C) 2019 Elia Ritterbusch + + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +/* Library made by: g4lvanix + * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib + + Info: Inititate the library by giving the required address. + Read or write to the necessary buffer according to the opperation. + */ + +#pragma once + +#ifndef I2C_SLAVE_REG_COUNT + +# if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) +# include "transport.h" +# define I2C_SLAVE_REG_COUNT sizeof(split_shared_memory_t) +# else // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) +# define I2C_SLAVE_REG_COUNT 30 +# endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) + +#endif // I2C_SLAVE_REG_COUNT + +_Static_assert(I2C_SLAVE_REG_COUNT < 256, "I2C target registers must be single byte"); + +extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; + +void i2c_slave_init(uint8_t address); +void i2c_slave_stop(void); diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c new file mode 100644 index 0000000000..9a7345a53d --- /dev/null +++ b/platforms/avr/drivers/serial.c @@ -0,0 +1,529 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +# define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" + +#ifdef SOFT_SERIAL_PIN + +# if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) +# error serial.c is not supported for the currently selected MCU +# endif +// if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial. +# if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +# if defined(USE_AVR_I2C) && (SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1) +# error Using I2C, so can not use PD0, PD1 +# endif +# endif +// PD0..PD3, common config +# if SOFT_SERIAL_PIN == D0 +# define EIMSK_BIT _BV(INT0) +# define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) +# define SERIAL_PIN_INTERRUPT INT0_vect +# define EICRx EICRA +# elif SOFT_SERIAL_PIN == D1 +# define EIMSK_BIT _BV(INT1) +# define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) +# define SERIAL_PIN_INTERRUPT INT1_vect +# define EICRx EICRA +# elif SOFT_SERIAL_PIN == D2 +# define EIMSK_BIT _BV(INT2) +# define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) +# define SERIAL_PIN_INTERRUPT INT2_vect +# define EICRx EICRA +# elif SOFT_SERIAL_PIN == D3 +# define EIMSK_BIT _BV(INT3) +# define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) +# define SERIAL_PIN_INTERRUPT INT3_vect +# define EICRx EICRA +# endif + +// ATmegaxxU2/AT90USB162 specific config +# if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB162__) +// PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4) +# if SOFT_SERIAL_PIN == D4 +# define EIMSK_BIT _BV(INT5) +# define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51))) +# define SERIAL_PIN_INTERRUPT INT5_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == D6 +# define EIMSK_BIT _BV(INT6) +# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) +# define SERIAL_PIN_INTERRUPT INT6_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == D7 +# define EIMSK_BIT _BV(INT7) +# define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71))) +# define SERIAL_PIN_INTERRUPT INT7_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == C7 +# define EIMSK_BIT _BV(INT4) +# define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41))) +# define SERIAL_PIN_INTERRUPT INT4_vect +# define EICRx EICRB +# endif +# endif + +// ATmegaxxU4 specific config +# if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) +// PE6(INT6) +# if SOFT_SERIAL_PIN == E6 +# define EIMSK_BIT _BV(INT6) +# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) +# define SERIAL_PIN_INTERRUPT INT6_vect +# define EICRx EICRB +# endif +# endif + +// AT90USBxxx specific config +# if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +// PE4..PE7(INT4..INT7) +# if SOFT_SERIAL_PIN == E4 +# define EIMSK_BIT _BV(INT4) +# define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41))) +# define SERIAL_PIN_INTERRUPT INT4_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == E5 +# define EIMSK_BIT _BV(INT5) +# define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51))) +# define SERIAL_PIN_INTERRUPT INT5_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == E6 +# define EIMSK_BIT _BV(INT6) +# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) +# define SERIAL_PIN_INTERRUPT INT6_vect +# define EICRx EICRB +# elif SOFT_SERIAL_PIN == E7 +# define EIMSK_BIT _BV(INT7) +# define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71))) +# define SERIAL_PIN_INTERRUPT INT7_vect +# define EICRx EICRB +# endif +# endif + +# ifndef SERIAL_PIN_INTERRUPT +# error invalid SOFT_SERIAL_PIN value +# endif + +# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) +# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) +# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) +# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) +# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) + +# define ALWAYS_INLINE __attribute__((always_inline)) +# define NO_INLINE __attribute__((noinline)) +# define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +# define ODD_PARITY 1 +# define EVEN_PARITY 0 +# define PARITY EVEN_PARITY + +# ifdef SERIAL_DELAY +// custom setup in config.h +// #define TID_SEND_ADJUST 2 +// #define SERIAL_DELAY 6 // micro sec +// #define READ_WRITE_START_ADJUST 30 // cycles +// #define READ_WRITE_WIDTH_ADJUST 8 // cycles +# else +// ============ Standard setups ============ + +# ifndef SELECT_SOFT_SERIAL_SPEED +# define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps (Experimental only) +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +# endif + +# if __GNUC__ < 6 +# define TID_SEND_ADJUST 14 +# else +# define TID_SEND_ADJUST 2 +# endif + +# if SELECT_SOFT_SERIAL_SPEED == 0 +// Very High speed +# define SERIAL_DELAY 4 // micro sec +# if __GNUC__ < 6 +# define READ_WRITE_START_ADJUST 33 // cycles +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_START_ADJUST 34 // cycles +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# elif SELECT_SOFT_SERIAL_SPEED == 1 +// High speed +# define SERIAL_DELAY 6 // micro sec +# if __GNUC__ < 6 +# define READ_WRITE_START_ADJUST 30 // cycles +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_START_ADJUST 33 // cycles +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# elif SELECT_SOFT_SERIAL_SPEED == 2 +// Middle speed +# define SERIAL_DELAY 12 // micro sec +# define READ_WRITE_START_ADJUST 30 // cycles +# if __GNUC__ < 6 +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# elif SELECT_SOFT_SERIAL_SPEED == 3 +// Low speed +# define SERIAL_DELAY 24 // micro sec +# define READ_WRITE_START_ADJUST 30 // cycles +# if __GNUC__ < 6 +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# elif SELECT_SOFT_SERIAL_SPEED == 4 +// Very Low speed +# define SERIAL_DELAY 36 // micro sec +# define READ_WRITE_START_ADJUST 30 // cycles +# if __GNUC__ < 6 +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# elif SELECT_SOFT_SERIAL_SPEED == 5 +// Ultra Low speed +# define SERIAL_DELAY 48 // micro sec +# define READ_WRITE_START_ADJUST 30 // cycles +# if __GNUC__ < 6 +# define READ_WRITE_WIDTH_ADJUST 3 // cycles +# else +# define READ_WRITE_WIDTH_ADJUST 7 // cycles +# endif +# else +# error invalid SELECT_SOFT_SERIAL_SPEED value +# endif /* SELECT_SOFT_SERIAL_SPEED */ +# endif /* SERIAL_DELAY */ + +# define SERIAL_DELAY_HALF1 (SERIAL_DELAY / 2) +# define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY / 2) + +# define SLAVE_INT_WIDTH_US 1 +# define SLAVE_INT_ACK_WIDTH_UNIT 2 +# define SLAVE_INT_ACK_WIDTH 4 + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); } + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); } + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); } + +inline static void serial_output(void) ALWAYS_INLINE; +inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); } + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static void serial_input_with_pullup(void) { setPinInputHigh(SOFT_SERIAL_PIN); } + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static uint8_t serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); } + +inline static void serial_low(void) ALWAYS_INLINE; +inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); } + +inline static void serial_high(void) ALWAYS_INLINE; +inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); } + +void soft_serial_initiator_init(void) { + serial_output(); + serial_high(); +} + +void soft_serial_target_init(void) { + serial_input_with_pullup(); + + // Enable INT0-INT7 + EIMSK |= EIMSK_BIT; + EICRx &= EICRx_BIT; +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY * 5 && serial_read_pin(); i++) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()) + ; +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for (i = 0, byte = 0, p = PARITY; i < bit; i++) { + serial_delay_half1(); // read the middle of pulses + if (serial_read_pin()) { + byte = (byte << 1) | 1; + p ^= 1; + } else { + byte = (byte << 1) | 0; + p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb) ? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for (p = PARITY, b = 1 << (bit - 1); b; b >>= 1) { + if (data & b) { + serial_high(); + p ^= 1; + } else { + serial_low(); + p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if (p & 1) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data, 8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static void change_sender2reciver(void) { + sync_send(); // 0 + serial_delay_half1(); // 1 + serial_low(); // 2 + serial_input_with_pullup(); // 2 + serial_delay_half1(); // 3 +} + +inline static void change_reciver2sender(void) { + sync_recv(); // 0 + serial_delay(); // 1 + serial_low(); // 3 + serial_output(); // 3 + serial_delay_half1(); // 4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) { + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount, 8); + tid = bits >> 3; + bits = (bits & 7) != (nibble_bits_count(tid) & 7); + if (bits || pecount > 0 || tid > NUM_TOTAL_TRANSACTIONS) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT * SLAVE_INT_ACK_WIDTH); + split_transaction_desc_t *trans = &split_transaction_table[tid]; + serial_low(); // response step2 ack high->low + + // If the transaction has a callback, we can execute it now + if (trans->slave_callback) { + trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans)); + } + + // target send phase + if (trans->target2initiator_buffer_size > 0) serial_send_packet((uint8_t *)split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if (trans->initiator2target_buffer_size > 0) { + if (serial_recive_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); // weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +int soft_serial_transaction(int sstd_index) { + if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR; + split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; + + if (!trans->status) return TRANSACTION_TYPE_ERROR; // not registered + + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + + // send transaction table index + int tid = (sstd_index << 3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 8); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while (!serial_read_pin()) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for (int i = 0; serial_read_pin(); i++) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } + + // initiator recive phase + // if the target is present syncronize with it + if (trans->target2initiator_buffer_size > 0) { + if (!serial_recive_packet((uint8_t *)split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if (trans->initiator2target_buffer_size > 0) { + serial_send_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +int soft_serial_get_and_clean_status(int sstd_index) { + split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0; + ; + sei(); + return retval; +} +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) +// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/platforms/avr/drivers/spi_master.c b/platforms/avr/drivers/spi_master.c new file mode 100644 index 0000000000..4e8fd3bcdf --- /dev/null +++ b/platforms/avr/drivers/spi_master.c @@ -0,0 +1,180 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "spi_master.h" + +#include "timer.h" + +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +# define SPI_SCK_PIN B1 +# define SPI_MOSI_PIN B2 +# define SPI_MISO_PIN B3 +#elif defined(__AVR_ATmega32A__) +# define SPI_SCK_PIN B7 +# define SPI_MOSI_PIN B5 +# define SPI_MISO_PIN B6 +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) +# define SPI_SCK_PIN B5 +# define SPI_MOSI_PIN B3 +# define SPI_MISO_PIN B4 +#endif + +#ifndef SPI_TIMEOUT +# define SPI_TIMEOUT 100 +#endif + +static pin_t currentSlavePin = NO_PIN; +static uint8_t currentSlaveConfig = 0; +static bool currentSlave2X = false; + +void spi_init(void) { + writePinHigh(SPI_SS_PIN); + setPinOutput(SPI_SCK_PIN); + setPinOutput(SPI_MOSI_PIN); + setPinInput(SPI_MISO_PIN); + + SPCR = (_BV(SPE) | _BV(MSTR)); +} + +bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { + if (currentSlavePin != NO_PIN || slavePin == NO_PIN) { + return false; + } + + currentSlaveConfig = 0; + + if (lsbFirst) { + currentSlaveConfig |= _BV(DORD); + } + + switch (mode) { + case 1: + currentSlaveConfig |= _BV(CPHA); + break; + case 2: + currentSlaveConfig |= _BV(CPOL); + break; + case 3: + currentSlaveConfig |= (_BV(CPOL) | _BV(CPHA)); + break; + } + + uint16_t roundedDivisor = 1; + while (roundedDivisor < divisor) { + roundedDivisor <<= 1; + } + + switch (roundedDivisor) { + case 16: + currentSlaveConfig |= _BV(SPR0); + break; + case 64: + currentSlaveConfig |= _BV(SPR1); + break; + case 128: + currentSlaveConfig |= (_BV(SPR1) | _BV(SPR0)); + break; + case 2: + currentSlave2X = true; + break; + case 8: + currentSlave2X = true; + currentSlaveConfig |= _BV(SPR0); + break; + case 32: + currentSlave2X = true; + currentSlaveConfig |= _BV(SPR1); + break; + } + + SPCR |= currentSlaveConfig; + if (currentSlave2X) { + SPSR |= _BV(SPI2X); + } + currentSlavePin = slavePin; + setPinOutput(currentSlavePin); + writePinLow(currentSlavePin); + + return true; +} + +spi_status_t spi_write(uint8_t data) { + SPDR = data; + + uint16_t timeout_timer = timer_read(); + while (!(SPSR & _BV(SPIF))) { + if ((timer_read() - timeout_timer) >= SPI_TIMEOUT) { + return SPI_STATUS_TIMEOUT; + } + } + + return SPDR; +} + +spi_status_t spi_read() { + SPDR = 0x00; // Dummy + + uint16_t timeout_timer = timer_read(); + while (!(SPSR & _BV(SPIF))) { + if ((timer_read() - timeout_timer) >= SPI_TIMEOUT) { + return SPI_STATUS_TIMEOUT; + } + } + + return SPDR; +} + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length) { + spi_status_t status; + + for (uint16_t i = 0; i < length; i++) { + status = spi_write(data[i]); + + if (status < 0) { + return status; + } + } + + return SPI_STATUS_SUCCESS; +} + +spi_status_t spi_receive(uint8_t *data, uint16_t length) { + spi_status_t status; + + for (uint16_t i = 0; i < length; i++) { + status = spi_read(); + + if (status >= 0) { + data[i] = status; + } else { + return status; + } + } + + return SPI_STATUS_SUCCESS; +} + +void spi_stop(void) { + if (currentSlavePin != NO_PIN) { + setPinOutput(currentSlavePin); + writePinHigh(currentSlavePin); + currentSlavePin = NO_PIN; + SPSR &= ~(_BV(SPI2X)); + SPCR &= ~(currentSlaveConfig); + currentSlaveConfig = 0; + currentSlave2X = false; + } +} diff --git a/platforms/avr/drivers/spi_master.h b/platforms/avr/drivers/spi_master.h new file mode 100644 index 0000000000..8a30f47ae4 --- /dev/null +++ b/platforms/avr/drivers/spi_master.h @@ -0,0 +1,59 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include + +#include "gpio.h" + +typedef int16_t spi_status_t; + +// Hardware SS pin is defined in the header so that user code can refer to it +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +# define SPI_SS_PIN B0 +#elif defined(__AVR_ATmega32A__) +# define SPI_SS_PIN B4 +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) +# define SPI_SS_PIN B2 +#endif + +#define SPI_STATUS_SUCCESS (0) +#define SPI_STATUS_ERROR (-1) +#define SPI_STATUS_TIMEOUT (-2) + +#define SPI_TIMEOUT_IMMEDIATE (0) +#define SPI_TIMEOUT_INFINITE (0xFFFF) + +#ifdef __cplusplus +extern "C" { +#endif +void spi_init(void); + +bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor); + +spi_status_t spi_write(uint8_t data); + +spi_status_t spi_read(void); + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length); + +spi_status_t spi_receive(uint8_t *data, uint16_t length); + +void spi_stop(void); +#ifdef __cplusplus +} +#endif diff --git a/platforms/avr/drivers/ssd1306.c b/platforms/avr/drivers/ssd1306.c new file mode 100644 index 0000000000..1a09a2bcb7 --- /dev/null +++ b/platforms/avr/drivers/ssd1306.c @@ -0,0 +1,319 @@ +#ifdef SSD1306OLED + +# include "ssd1306.h" +# include "i2c.h" +# include +# include "print.h" +# include "glcdfont.c" +# ifdef PROTOCOL_LUFA +# include "lufa.h" +# endif +# include "sendchar.h" +# include "timer.h" + +struct CharacterMatrix display; + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +# define DEBUG_TO_SCREEN 0 + +// static uint16_t last_battery_update; +// static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ +# define ScreenOffInterval 300000 /* milliseconds */ +# if DEBUG_TO_SCREEN +static uint8_t displaying; +# endif +static uint16_t last_flush; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +# define send_cmd1(c) \ + if (!_send_cmd1(c)) { \ + goto done; \ + } +# define send_cmd2(c, o) \ + if (!_send_cmd2(c, o)) { \ + goto done; \ + } +# define send_cmd3(c, o1, o2) \ + if (!_send_cmd3(c, o1, o2)) { \ + goto done; \ + } + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +# if DEBUG_TO_SCREEN +# undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +# endif + +bool iota_gfx_init(void) { + bool success = false; + + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + +# ifdef OLED_ROTATE180 + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); +# endif +# ifndef OLED_ROTATE180 + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); +# endif + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +# if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +# endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); } + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { matrix_write(&display, data); } + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); } + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { matrix_clear(&display); } + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +# if DEBUG_TO_SCREEN + ++displaying; +# endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +# if DEBUG_TO_SCREEN + --displaying; +# endif +} + +void iota_gfx_flush(void) { matrix_render(&display); } + +__attribute__((weak)) void iota_gfx_task_user(void) {} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty) { + iota_gfx_flush(); + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} +#endif diff --git a/platforms/avr/drivers/ssd1306.h b/platforms/avr/drivers/ssd1306.h new file mode 100644 index 0000000000..6eecdcfaa4 --- /dev/null +++ b/platforms/avr/drivers/ssd1306.h @@ -0,0 +1,87 @@ +#pragma once + +#include +#include +#include "config.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +# define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +extern struct CharacterMatrix display; + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); diff --git a/platforms/avr/drivers/uart.c b/platforms/avr/drivers/uart.c new file mode 100644 index 0000000000..c6abcb6fe0 --- /dev/null +++ b/platforms/avr/drivers/uart.c @@ -0,0 +1,170 @@ +/* UART Example for Teensy USB Development Board + * http://www.pjrc.com/teensy/ + * Copyright (c) 2009 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +// Version 1.0: Initial Release +// Version 1.1: Add support for Teensy 2.0, minor optimizations + +#include +#include + +#include "uart.h" + +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +# define UDRn UDR1 +# define UBRRnL UBRR1L +# define UCSRnA UCSR1A +# define UCSRnB UCSR1B +# define UCSRnC UCSR1C +# define U2Xn U2X1 +# define RXENn RXEN1 +# define TXENn TXEN1 +# define RXCIEn RXCIE1 +# define UCSZn1 UCSZ11 +# define UCSZn0 UCSZ10 +# define UDRIEn UDRIE1 +# define USARTn_UDRE_vect USART1_UDRE_vect +# define USARTn_RX_vect USART1_RX_vect +#elif defined(__AVR_ATmega32A__) +# define UDRn UDR +# define UBRRnL UBRRL +# define UCSRnA UCSRA +# define UCSRnB UCSRB +# define UCSRnC UCSRC +# define U2Xn U2X +# define RXENn RXEN +# define TXENn TXEN +# define RXCIEn RXCIE +# define UCSZn1 UCSZ1 +# define UCSZn0 UCSZ0 +# define UDRIEn UDRIE +# define USARTn_UDRE_vect USART_UDRE_vect +# define USARTn_RX_vect USART_RX_vect +#elif defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) +# define UDRn UDR0 +# define UBRRnL UBRR0L +# define UCSRnA UCSR0A +# define UCSRnB UCSR0B +# define UCSRnC UCSR0C +# define U2Xn U2X0 +# define RXENn RXEN0 +# define TXENn TXEN0 +# define RXCIEn RXCIE0 +# define UCSZn1 UCSZ01 +# define UCSZn0 UCSZ00 +# define UDRIEn UDRIE0 +# define USARTn_UDRE_vect USART_UDRE_vect +# define USARTn_RX_vect USART_RX_vect +#endif + +// These buffers may be any size from 2 to 256 bytes. +#define RX_BUFFER_SIZE 64 +#define TX_BUFFER_SIZE 256 + +static volatile uint8_t tx_buffer[TX_BUFFER_SIZE]; +static volatile uint8_t tx_buffer_head; +static volatile uint8_t tx_buffer_tail; +static volatile uint8_t rx_buffer[RX_BUFFER_SIZE]; +static volatile uint8_t rx_buffer_head; +static volatile uint8_t rx_buffer_tail; + +// Initialize the UART +void uart_init(uint32_t baud) { + cli(); + UBRRnL = (F_CPU / 4 / baud - 1) / 2; + UCSRnA = (1 << U2Xn); + UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn); + UCSRnC = (1 << UCSZn1) | (1 << UCSZn0); + tx_buffer_head = tx_buffer_tail = 0; + rx_buffer_head = rx_buffer_tail = 0; + sei(); +} + +// Transmit a byte +void uart_putchar(uint8_t c) { + uint8_t i; + + i = tx_buffer_head + 1; + if (i >= TX_BUFFER_SIZE) i = 0; + // return immediately to avoid deadlock when interrupt is disabled(called from ISR) + if (tx_buffer_tail == i && (SREG & (1 << SREG_I)) == 0) return; + while (tx_buffer_tail == i) + ; // wait until space in buffer + // cli(); + tx_buffer[i] = c; + tx_buffer_head = i; + UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn) | (1 << UDRIEn); + // sei(); +} + +// Receive a byte +uint8_t uart_getchar(void) { + uint8_t c, i; + + while (rx_buffer_head == rx_buffer_tail) + ; // wait for character + i = rx_buffer_tail + 1; + if (i >= RX_BUFFER_SIZE) i = 0; + c = rx_buffer[i]; + rx_buffer_tail = i; + return c; +} + +// Return whether the number of bytes waiting in the receive buffer is nonzero. +// Call this before uart_getchar() to check if it will need +// to wait for a byte to arrive. +bool uart_available(void) { + uint8_t head, tail; + + head = rx_buffer_head; + tail = rx_buffer_tail; + if (head >= tail) return (head - tail) > 0; + return (RX_BUFFER_SIZE + head - tail) > 0; +} + +// Transmit Interrupt +ISR(USARTn_UDRE_vect) { + uint8_t i; + + if (tx_buffer_head == tx_buffer_tail) { + // buffer is empty, disable transmit interrupt + UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn); + } else { + i = tx_buffer_tail + 1; + if (i >= TX_BUFFER_SIZE) i = 0; + UDRn = tx_buffer[i]; + tx_buffer_tail = i; + } +} + +// Receive Interrupt +ISR(USARTn_RX_vect) { + uint8_t c, i; + + c = UDRn; + i = rx_buffer_head + 1; + if (i >= RX_BUFFER_SIZE) i = 0; + if (i != rx_buffer_tail) { + rx_buffer[i] = c; + rx_buffer_head = i; + } +} diff --git a/platforms/avr/drivers/uart.h b/platforms/avr/drivers/uart.h new file mode 100644 index 0000000000..602eb3d8b0 --- /dev/null +++ b/platforms/avr/drivers/uart.h @@ -0,0 +1,35 @@ +/* UART Example for Teensy USB Development Board + * http://www.pjrc.com/teensy/ + * Copyright (c) 2009 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#pragma once + +#include +#include + +void uart_init(uint32_t baud); + +void uart_putchar(uint8_t c); + +uint8_t uart_getchar(void); + +bool uart_available(void); diff --git a/platforms/avr/drivers/ws2812.c b/platforms/avr/drivers/ws2812.c new file mode 100644 index 0000000000..77c492cd4c --- /dev/null +++ b/platforms/avr/drivers/ws2812.c @@ -0,0 +1,176 @@ +/* + * light weight WS2812 lib V2.0b + * + * Controls WS2811/WS2812/WS2812B RGB-LEDs + * Author: Tim (cpldcpu@gmail.com) + * + * Jan 18th, 2014 v2.0b Initial Version + * Nov 29th, 2015 v2.3 Added SK6812RGBW support + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ws2812.h" +#include +#include +#include + +#define pinmask(pin) (_BV((pin)&0xF)) + +/* + * Forward declare internal functions + * + * The functions take a byte-array and send to the data output as WS2812 bitstream. + * The length is the number of bytes to send - three per LED. + */ + +static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi); + +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) { + DDRx_ADDRESS(RGB_DI_PIN) |= pinmask(RGB_DI_PIN); + + uint8_t masklo = ~(pinmask(RGB_DI_PIN)) & PORTx_ADDRESS(RGB_DI_PIN); + uint8_t maskhi = pinmask(RGB_DI_PIN) | PORTx_ADDRESS(RGB_DI_PIN); + + ws2812_sendarray_mask((uint8_t *)ledarray, number_of_leds * sizeof(LED_TYPE), masklo, maskhi); + + _delay_us(WS2812_TRST_US); +} + +/* + This routine writes an array of bytes with RGB values to the Dataout pin + using the fast 800kHz clockless WS2811/2812 protocol. +*/ + +// Timing in ns +#define w_zeropulse 350 +#define w_onepulse 900 +#define w_totalperiod 1250 + +// Fixed cycles used by the inner loop +#define w_fixedlow 2 +#define w_fixedhigh 4 +#define w_fixedtotal 8 + +// Insert NOPs to match the timing, if possible +#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000) +#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000) +#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000) + +// w1_nops - nops between rising edge and falling edge - low +#if w_zerocycles >= w_fixedlow +# define w1_nops (w_zerocycles - w_fixedlow) +#else +# define w1_nops 0 +#endif + +// w2_nops - nops between fe low and fe high +#if w_onecycles >= (w_fixedhigh + w1_nops) +# define w2_nops (w_onecycles - w_fixedhigh - w1_nops) +#else +# define w2_nops 0 +#endif + +// w3_nops - nops to complete loop +#if w_totalcycles >= (w_fixedtotal + w1_nops + w2_nops) +# define w3_nops (w_totalcycles - w_fixedtotal - w1_nops - w2_nops) +#else +# define w3_nops 0 +#endif + +// The only critical timing parameter is the minimum pulse length of the "0" +// Warn or throw error if this timing can not be met with current F_CPU settings. +#define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000) +#if w_lowtime > 550 +# error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" +#elif w_lowtime > 450 +# warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." +# warning "Please consider a higher clockspeed, if possible" +#endif + +#define w_nop1 "nop \n\t" +#define w_nop2 "rjmp .+0 \n\t" +#define w_nop4 w_nop2 w_nop2 +#define w_nop8 w_nop4 w_nop4 +#define w_nop16 w_nop8 w_nop8 + +static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi) { + uint8_t curbyte, ctr, sreg_prev; + + sreg_prev = SREG; + cli(); + + while (datlen--) { + curbyte = (*data++); + + asm volatile(" ldi %0,8 \n\t" + "loop%=: \n\t" + " out %2,%3 \n\t" // '1' [01] '0' [01] - re +#if (w1_nops & 1) + w_nop1 +#endif +#if (w1_nops & 2) + w_nop2 +#endif +#if (w1_nops & 4) + w_nop4 +#endif +#if (w1_nops & 8) + w_nop8 +#endif +#if (w1_nops & 16) + w_nop16 +#endif + " sbrs %1,7 \n\t" // '1' [03] '0' [02] + " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low + " lsl %1 \n\t" // '1' [04] '0' [04] +#if (w2_nops & 1) + w_nop1 +#endif +#if (w2_nops & 2) + w_nop2 +#endif +#if (w2_nops & 4) + w_nop4 +#endif +#if (w2_nops & 8) + w_nop8 +#endif +#if (w2_nops & 16) + w_nop16 +#endif + " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high +#if (w3_nops & 1) + w_nop1 +#endif +#if (w3_nops & 2) + w_nop2 +#endif +#if (w3_nops & 4) + w_nop4 +#endif +#if (w3_nops & 8) + w_nop8 +#endif +#if (w3_nops & 16) + w_nop16 +#endif + + " dec %0 \n\t" // '1' [+2] '0' [+2] + " brne loop%=\n\t" // '1' [+3] '0' [+4] + : "=&d"(ctr) + : "r"(curbyte), "I"(_SFR_IO_ADDR(PORTx_ADDRESS(RGB_DI_PIN))), "r"(maskhi), "r"(masklo)); + } + + SREG = sreg_prev; +} diff --git a/platforms/avr/drivers/ws2812_i2c.c b/platforms/avr/drivers/ws2812_i2c.c new file mode 100644 index 0000000000..1c332e24b6 --- /dev/null +++ b/platforms/avr/drivers/ws2812_i2c.c @@ -0,0 +1,27 @@ +#include "ws2812.h" +#include "i2c_master.h" + +#ifdef RGBW +# error "RGBW not supported" +#endif + +#ifndef WS2812_ADDRESS +# define WS2812_ADDRESS 0xb0 +#endif + +#ifndef WS2812_TIMEOUT +# define WS2812_TIMEOUT 100 +#endif + +void ws2812_init(void) { i2c_init(); } + +// Setleds for standard RGB +void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { + static bool s_init = false; + if (!s_init) { + ws2812_init(); + s_init = true; + } + + i2c_transmit(WS2812_ADDRESS, (uint8_t *)ledarray, sizeof(LED_TYPE) * leds, WS2812_TIMEOUT); +} -- cgit v1.2.3