From de96513ff2f12e56a572b6f54db548725194c10b Mon Sep 17 00:00:00 2001 From: Toni Date: Sun, 17 Jul 2016 14:57:56 +0200 Subject: changes needed for a ISO satan PCB including a split right-shift key --- keyboards/satan/keymaps/iso_split_rshift/Makefile | 70 ++++++++ keyboards/satan/keymaps/iso_split_rshift/build.sh | 17 ++ keyboards/satan/keymaps/iso_split_rshift/config.h | 31 ++++ keyboards/satan/keymaps/iso_split_rshift/keymap.c | 192 +++++++++++++++++++++ .../satan/keymaps/iso_split_rshift/resetboard.sh | 4 + keyboards/satan/keymaps/iso_split_rshift/satan.c | 30 ++++ keyboards/satan/keymaps/iso_split_rshift/satan.h | 96 +++++++++++ 7 files changed, 440 insertions(+) create mode 100644 keyboards/satan/keymaps/iso_split_rshift/Makefile create mode 100755 keyboards/satan/keymaps/iso_split_rshift/build.sh create mode 100644 keyboards/satan/keymaps/iso_split_rshift/config.h create mode 100644 keyboards/satan/keymaps/iso_split_rshift/keymap.c create mode 100755 keyboards/satan/keymaps/iso_split_rshift/resetboard.sh create mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.c create mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.h (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile new file mode 100644 index 0000000000..67eaa078f7 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -0,0 +1,70 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh new file mode 100755 index 0000000000..2bfc3bb32d --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -0,0 +1,17 @@ +#!/bin/bash +# adjust for cpu +# -j 16 gave best result on a hyperthreaded quad core core i7 +THREADS="-j 16" +echo "We need sudo later" +sudo ls 2>&1 /dev/null +make clean +make KEYMAP=toni77 ${THREADS} +if [[ $? -eq 0 ]] +then + echo "please trigger flashing! you have 5 seconds" + sleep 5 + sudo make KEYMAP=toni77 dfu ${THREADS} +else + echo "make failed" + exit 77 +fi diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h new file mode 100644 index 0000000000..39eec4b597 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + + +#define RGB_DI_PIN B2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c new file mode 100644 index 0000000000..fc07f6da8d --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -0,0 +1,192 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "satan.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEF 0 +#define _SPC 1 +#define _TAB 2 +#define _SFX 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _DEF: Default Layer + * ,-----------------------------------------------------------.------------------------------------- + * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 !! + * |-----------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |-----------------------------------------------------------| + * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is + * `-----------------------------------------------------------' LEFT DWN RIGHT + */ +[_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ + KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , + /* Keymap 1: F-and-vim Layer, modified with Space (Fn0) + * ,-----------------------------------------------------------.----------------------------------------- + * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| + * |-----------------------------------------------------------| + * | |Paus| Up| | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY | + * |-----------------------------------------------------------| + * | | | | | | |M0 | | | | | Vol+ | | + * |-----------------------------------------------------------| + * | | | | |Alt |Prev|Vol-|Next| + * `-----------------------------------------------------------' + */ +[_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) , + + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1) + * ,-----------------------------------------------------------.----------------------------------------- + * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | |Pos1|PgDn|PgUp|End| |Retrn | + * |-----------------------------------------------------------| + * | | | | | | |AF2| | | | | PgUp | | + * |-----------------------------------------------------------| + * | | | | |Alt |Pos1|PgDn|End | + * `-----------------------------------------------------------' + */ +[_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END) , + + /* Keymap 3: Split right shift Numpad toggle Layer (Fn2) + * ,-----------------------------------------------------------.----------------------------------------- + * |RSET| | | | | | | 7| 8| 9| | | |Backsp | + * |-----------------------------------------------------------| + * | | | | | | | | 4 | 5 | 6 | | | | \ | + * |-----------------------------------------------------------| + * | | L | L | | | | | 1 | 2 | 3 | | | Return | + * |-----------------------------------------------------------| + * | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * |-----------------------------------------------------------| LED controlling + * |Ctrl|Win |Alt | |Alt |Left|Down|Right| + * `-----------------------------------------------------------' + */ +[_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ + KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ + KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) , + +}; + +enum function_id { + LAUNCH, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE), + [1] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), + [2] = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB), + [3] = ACTION_LAYER_TOGGLE(_SFX), + [4] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), + [5] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), + [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), + [7] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), + [8] = ACTION_FUNCTION(LAUNCH), + [9] = ACTION_FUNCTION(RGBLED_TOGGLE), + [10] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; + case 1: + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } + return MACRO_NONE; +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} diff --git a/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh new file mode 100755 index 0000000000..d955ccf545 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh @@ -0,0 +1,4 @@ +#!/bin/bash +sudo dfu-programmer atmega32u4 erase --force +sudo dfu-programmer atmega32u4 flash clear_flash.hex +sudo dfu-programmer atmega32u4 reset diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.c b/keyboards/satan/keymaps/iso_split_rshift/satan.c new file mode 100644 index 0000000000..d2c5d5c205 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/satan.c @@ -0,0 +1,30 @@ +#include "satan.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1< Date: Sun, 17 Jul 2016 15:10:14 +0200 Subject: helper file for me to stay up-to-date with master --- keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh | 4 ++++ 1 file changed, 4 insertions(+) create mode 100755 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh new file mode 100755 index 0000000000..d17ec76ecd --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh @@ -0,0 +1,4 @@ +#!/bin/bash +git checkout iso_split_rshift # gets you "on branch dmgr2" +git fetch origin # gets you up to date with origin +git merge origin/master -- cgit v1.2.3 From 11bf8355cf90b64d749d39cd49ec597a48e8beb9 Mon Sep 17 00:00:00 2001 From: Toni Date: Sun, 17 Jul 2016 23:13:49 +0200 Subject: new modifier "J" is crtl --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index fc07f6da8d..a2623e0e09 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DEF] = KEYMAP_ISO_SPLITRSHIFT( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ + F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, F(17), KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , /* Keymap 1: F-and-vim Layer, modified with Space (Fn0) @@ -124,7 +124,7 @@ const uint16_t PROGMEM fn_actions[] = { [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), + [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_J), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -- cgit v1.2.3 From 36242d5ac5b42d828b51ff87a9317dc8420c1b6c Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 18 Jul 2016 10:50:19 +0200 Subject: reduced makefile size. not so much needed due to "inheritance" --- keyboards/satan/keymaps/iso_split_rshift/Makefile | 51 ----------------------- 1 file changed, 51 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile index 67eaa078f7..e25515b692 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/Makefile +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -1,54 +1,3 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # -- cgit v1.2.3 From 4b32a161d04c9efe650479b89d4c8f323dd41aa3 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 18 Jul 2016 10:50:45 +0200 Subject: renamed keymap --- keyboards/satan/keymaps/iso_split_rshift/build.sh | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh index 2bfc3bb32d..c286f26f8e 100755 --- a/keyboards/satan/keymaps/iso_split_rshift/build.sh +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -2,15 +2,16 @@ # adjust for cpu # -j 16 gave best result on a hyperthreaded quad core core i7 THREADS="-j 16" +KMAP=iso_split_rschift echo "We need sudo later" sudo ls 2>&1 /dev/null make clean -make KEYMAP=toni77 ${THREADS} +make KEYMAP=iso_split_rschift ${THREADS} if [[ $? -eq 0 ]] then echo "please trigger flashing! you have 5 seconds" sleep 5 - sudo make KEYMAP=toni77 dfu ${THREADS} + sudo make KEYMAP=iso_split_rschift dfu ${THREADS} else echo "make failed" exit 77 -- cgit v1.2.3 From 1988c180e3cc971e83db0f9e862de4857ce6d766 Mon Sep 17 00:00:00 2001 From: Toni Date: Tue, 19 Jul 2016 09:16:55 +0200 Subject: small cosmetic change --- keyboards/satan/keymaps/iso_split_rshift/build.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh index c286f26f8e..9523f6716f 100755 --- a/keyboards/satan/keymaps/iso_split_rshift/build.sh +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -2,16 +2,16 @@ # adjust for cpu # -j 16 gave best result on a hyperthreaded quad core core i7 THREADS="-j 16" -KMAP=iso_split_rschift +KMAP=iso_split_rshift echo "We need sudo later" sudo ls 2>&1 /dev/null make clean -make KEYMAP=iso_split_rschift ${THREADS} +make KEYMAP=${KMAP} ${THREADS} if [[ $? -eq 0 ]] then echo "please trigger flashing! you have 5 seconds" sleep 5 - sudo make KEYMAP=iso_split_rschift dfu ${THREADS} + sudo make KEYMAP=${KMAP} dfu ${THREADS} else echo "make failed" exit 77 -- cgit v1.2.3 From 5cd6d607fc7362fdf72ecd76f802305bce68270c Mon Sep 17 00:00:00 2001 From: Toni Date: Tue, 19 Jul 2016 09:17:31 +0200 Subject: changed ctrl back to enter. "j" interfered with my vimming --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index a2623e0e09..fc07f6da8d 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DEF] = KEYMAP_ISO_SPLITRSHIFT( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, F(17), KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , /* Keymap 1: F-and-vim Layer, modified with Space (Fn0) @@ -124,7 +124,7 @@ const uint16_t PROGMEM fn_actions[] = { [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_J), + [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -- cgit v1.2.3 From c1f014b1dd24ba7e121ae3ca999d832b07ce50cf Mon Sep 17 00:00:00 2001 From: Toni Date: Fri, 22 Jul 2016 08:13:06 +0200 Subject: purely cosmetic changes --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 84 +++++++++++------------ 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index fc07f6da8d..17d4b33456 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -14,7 +14,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _DEF: Default Layer - * ,-----------------------------------------------------------.------------------------------------- + * ,-----------------------------------------------------------. * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | * |-----------------------------------------------------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 !! @@ -26,14 +26,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is * `-----------------------------------------------------------' LEFT DWN RIGHT */ -[_DEF] = KEYMAP_ISO_SPLITRSHIFT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ - KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , + [_DEF] = KEYMAP_ISO_SPLITRSHIFT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ + KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , + /* Keymap 1: F-and-vim Layer, modified with Space (Fn0) - * ,-----------------------------------------------------------.----------------------------------------- + * ,-----------------------------------------------------------. * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| * |-----------------------------------------------------------| * | |Paus| Up| | | | | | | | | | | | @@ -45,15 +46,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | |Alt |Prev|Vol-|Next| * `-----------------------------------------------------------' */ -[_SPC] = KEYMAP_ISO_SPLITRSHIFT( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) , - + [_SPC] = KEYMAP_ISO_SPLITRSHIFT( + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1) - * ,-----------------------------------------------------------.----------------------------------------- + * ,-----------------------------------------------------------. * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE * |-----------------------------------------------------------| * | | | | | | | | | | | | | | | @@ -65,15 +66,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | |Alt |Pos1|PgDn|End | * `-----------------------------------------------------------' */ -[_TAB] = KEYMAP_ISO_SPLITRSHIFT( - KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END) , - + [_TAB] = KEYMAP_ISO_SPLITRSHIFT( + KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + /* Keymap 3: Split right shift Numpad toggle Layer (Fn2) - * ,-----------------------------------------------------------.----------------------------------------- + * ,-----------------------------------------------------------. * |RSET| | | | | | | 7| 8| 9| | | |Backsp | * |-----------------------------------------------------------| * | | | | | | | | 4 | 5 | 6 | | | | \ | @@ -85,13 +86,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | |Alt |Left|Down|Right| * `-----------------------------------------------------------' */ -[_SFX] = KEYMAP_ISO_SPLITRSHIFT( - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ - KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ - KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) , - + [_SFX] = KEYMAP_ISO_SPLITRSHIFT( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ + KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ + KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), }; enum function_id { @@ -129,19 +129,19 @@ const uint16_t PROGMEM fn_actions[] = { const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { + // MACRODOWN only works in this function + switch(id) { case 0: - return (record->event.pressed ? - MACRO( D(RALT), T(SPC), U(RALT), END ) - :MACRO( END )); - break; + return (record->event.pressed ? + MACRO( D(RALT), T(SPC), U(RALT), END ) + :MACRO( END )); + break; case 1: - return (record->event.pressed ? - MACRO( D(LALT), T(F2), U(LALT), END ) - :MACRO( END )); - break; - } + return (record->event.pressed ? + MACRO( D(LALT), T(F2), U(LALT), END ) + :MACRO( END )); + break; + } return MACRO_NONE; }; -- cgit v1.2.3 From 197244e47f619b0853e4fdb54bb821a32b584764 Mon Sep 17 00:00:00 2001 From: Toni Date: Fri, 22 Jul 2016 08:14:08 +0200 Subject: more cosmetic changes (whitespace) --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 17d4b33456..c7aad3fc00 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -116,7 +116,7 @@ const uint16_t PROGMEM fn_actions[] = { [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), [7] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), [8] = ACTION_FUNCTION(LAUNCH), - [9] = ACTION_FUNCTION(RGBLED_TOGGLE), + purely cosmetic changes [9] = ACTION_FUNCTION(RGBLED_TOGGLE), [10] = ACTION_FUNCTION(RGBLED_STEP_MODE), [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), -- cgit v1.2.3 From 5631f1436c356fb9e09138f186981dc9b6cb43a2 Mon Sep 17 00:00:00 2001 From: Toni Date: Fri, 22 Jul 2016 11:17:57 +0200 Subject: converted funtions to QMK aliases --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 55 ++++++++++------------- 1 file changed, 23 insertions(+), 32 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index c7aad3fc00..545cb1ab18 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -27,13 +27,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' LEFT DWN RIGHT */ [_DEF] = KEYMAP_ISO_SPLITRSHIFT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \ - KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) , - - /* Keymap 1: F-and-vim Layer, modified with Space (Fn0) + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + LT(_TAB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, CTL_T(KC_ENT), \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), SFT_T(KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN), CTL_T(KC_RIGHT)), + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) * ,-----------------------------------------------------------. * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| * |-----------------------------------------------------------| @@ -53,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), - /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1) + /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) * ,-----------------------------------------------------------. * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE * |-----------------------------------------------------------| @@ -73,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), - /* Keymap 3: Split right shift Numpad toggle Layer (Fn2) + /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) * ,-----------------------------------------------------------. * |RSET| | | | | | | 7| 8| 9| | | |Backsp | * |-----------------------------------------------------------| @@ -87,11 +86,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_SFX] = KEYMAP_ISO_SPLITRSHIFT( - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ - KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ - KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ + KC_TRNS, F(2), F(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ + KC_TRNS, F(4), F(5), F(6), F(7), F(8), F(9), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), }; enum function_id { @@ -107,24 +106,16 @@ enum function_id { }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE), - [1] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), - [2] = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB), - [3] = ACTION_LAYER_TOGGLE(_SFX), - [4] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), - [5] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), - [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), - [7] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), - [8] = ACTION_FUNCTION(LAUNCH), - purely cosmetic changes [9] = ACTION_FUNCTION(RGBLED_TOGGLE), - [10] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), + [1] = ACTION_FUNCTION(LAUNCH), + [2] = ACTION_FUNCTION(RGBLED_TOGGLE), + [3] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -- cgit v1.2.3 From 6ff8a8152035a32f6521d09d91594eeba269486d Mon Sep 17 00:00:00 2001 From: Toni Date: Wed, 27 Jul 2016 21:11:55 +0200 Subject: first try ar adding the parenthesis mess for german iso --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 545cb1ab18..4bd990d375 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -32,25 +32,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, CTL_T(KC_ENT), \ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), SFT_T(KC_UP), \ KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN), CTL_T(KC_RIGHT)), + /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) * ,-----------------------------------------------------------. * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| * |-----------------------------------------------------------| - * | |Paus| Up| | | | | | | | | | | | + * | |Paus| Up| [ | ] | | | | ( | ) | | | | | * |-----------------------------------------------------------| * | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY | * |-----------------------------------------------------------| - * | | | | | | |M0 | | | | | Vol+ | | + * | | | | < | > | |M0 | | { | } | | Vol+ | | * |-----------------------------------------------------------| * | | | | |Alt |Prev|Vol-|Next| * `-----------------------------------------------------------' */ [_SPC] = KEYMAP_ISO_SPLITRSHIFT( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) * ,-----------------------------------------------------------. -- cgit v1.2.3 From 684d869fab8bf513b2939ea544068f115b9d7b85 Mon Sep 17 00:00:00 2001 From: Toni Date: Thu, 28 Jul 2016 11:58:53 +0200 Subject: added homerow-ish brackets --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 4bd990d375..7af7c14bd8 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -21,7 +21,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------| * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP + * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP * |-----------------------------------------------------------| * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is * `-----------------------------------------------------------' LEFT DWN RIGHT @@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------| * | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY | * |-----------------------------------------------------------| - * | | | | < | > | |M0 | | { | } | | Vol+ | | + * | | | | | < | > | |M0 | | { | } | | Vol+ | | * |-----------------------------------------------------------| * | | | | |Alt |Prev|Vol-|Next| * `-----------------------------------------------------------' @@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------| * | | | | | | | |Pos1|PgDn|PgUp|End| |Retrn | * |-----------------------------------------------------------| - * | | | | | | |AF2| | | | | PgUp | | + * | | | | | | | |AF2| | | | | PgUp | | * |-----------------------------------------------------------| * | | | | |Alt |Pos1|PgDn|End | * `-----------------------------------------------------------' @@ -81,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------| * | | L | L | | | | | 1 | 2 | 3 | | | Return | * |-----------------------------------------------------------| - * | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent + * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent * |-----------------------------------------------------------| LED controlling * |Ctrl|Win |Alt | |Alt |Left|Down|Right| * `-----------------------------------------------------------' -- cgit v1.2.3 From abc3cd4d72ebd7627ebb78a78ad88827fbe4d5f9 Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sun, 31 Jul 2016 03:04:37 -0700 Subject: Update readme.md --- keyboards/planck/keymaps/jeebak/readme.md | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index eb8104379d..25fbc5e67e 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -7,7 +7,7 @@ the exact changes. The diagrams in this README shows the highlights of the changes from the default mappings. I also decided to change all calls to `persistant_default_layer_set()` to -`update_tri_layer()` since this is my personal perference. +`default_layer_set()` since this is my personal perference. ## Base Layers (Qwerty/Colemak/Dvorak) These base layers are mostly the same as the default mappings. The interesting @@ -69,11 +69,12 @@ keys at the far left are for quick access to beginning and end of line in vim. as the modifier, with the `IJKL` home row keys representing the inverted-T of the arrow keys. All of the default TouchCursor keymappings for the right hand are represented below. My personalizations include all of the keys shown for -the left hand. Having the `Alt` and `Shift` keys readily accessible from the -home row allows quick word jumps and highlighting when used in conjunction with -the arrow keys. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and -`KC_AGAIN` keycodes have been mapped but they don't seem to work on Mac. -Presumably they'll work under Windows. +the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key +from the base layers) readily accessible from the home row allows quick word +jumps and highlighting when used in conjunction with the arrow keys. The +`KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` keycodes have +been mapped but they don't seem to work on Mac. Presumably they'll work under +Windows. ``` ,-----------------------------------------------------------------------------------. | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | -- cgit v1.2.3 From fdd89e7f0d50f619e8608a4448449a3a627f1da1 Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sun, 31 Jul 2016 17:16:25 -0700 Subject: Add Alt-Tab, Cmd-Tab, and Ctl-Tab Macros to TouchCursor layer, swap LGUI and LSFT --- keyboards/planck/keymaps/jeebak/keymap.c | 35 +++++++++++++++++++++++++++---- keyboards/planck/keymaps/jeebak/readme.md | 16 ++++++++++---- 2 files changed, 43 insertions(+), 8 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index ec142ecbb5..ef4de074fc 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -24,6 +24,7 @@ extern keymap_config_t keymap_config; #define _MOUSE 7 #define _ADJUST 16 +// Keycodes enum planck_keycodes { QWERTY = SAFE_RANGE, COLEMAK, @@ -35,16 +36,25 @@ enum planck_keycodes { EXT_PLV }; +enum macro_keycodes { + KC_ALT_TAB, + KC_CMD_TAB, + KC_CTL_TAB, +}; + // Fillers to make layering more clear #define _______ KC_TRNS #define XXXXXXX KC_NO // Custom macros #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor -// ^-- Requires KC_TRNS / _______ for the trigger key in the destination layer #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor. #define LT_ML LT(_MOUSE, KC_A) // L-ayer T-ap M-ouse C-ursor (on A) +#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab +#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab +#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -140,7 +150,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations * ,-----------------------------------------------------------------------------------. - * | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + * |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | * |------+------+------+------+------+-------------+------+------+------+------+------| * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | * |------+------+------+------+------+------|------+------+------+------+------+------| @@ -154,7 +164,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_TOUCHCURSOR] = { - {_______, _______, _______, KC_LSFT, KC_LGUI, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, + {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, {_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} @@ -330,6 +340,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case KC_ALT_TAB: + return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CMD_TAB: + return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CTL_TAB: + return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); + } + + return MACRO_NONE; +} + void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 25fbc5e67e..f7daf53d84 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -9,6 +9,11 @@ changes from the default mappings. I also decided to change all calls to `persistant_default_layer_set()` to `default_layer_set()` since this is my personal perference. +## Macros +``` +#define ALT_TAB M(KC_ALT_TAB) +``` + ## Base Layers (Qwerty/Colemak/Dvorak) These base layers are mostly the same as the default mappings. The interesting changes are shown below. The `Ctrl/Esc`, mapped using `CTL_T(KC_ESC)` will emit @@ -72,12 +77,15 @@ are represented below. My personalizations include all of the keys shown for the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key from the base layers) readily accessible from the home row allows quick word jumps and highlighting when used in conjunction with the arrow keys. The -`KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` keycodes have -been mapped but they don't seem to work on Mac. Presumably they'll work under -Windows. +`AltTab` macro is not only useful under Windows, but also under Mac when used +with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch). +The `CmdTab` and `CtlTab` sequences are duplicated for easy access while in +this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` +keycodes have been mapped but they don't seem to work on Mac. Presumably +they'll work under Windows. ``` ,-----------------------------------------------------------------------------------. - | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | |------+------+------+------+------+------|------+------+------+------+------+------| -- cgit v1.2.3 From 16f4a3178459305fd517d23f028812620e64c18f Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Mon, 1 Aug 2016 15:28:05 -0700 Subject: Number layer tweaks --- keyboards/planck/keymaps/jeebak/keymap.c | 8 ++++---- keyboards/planck/keymaps/jeebak/readme.md | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index ef4de074fc..e39887394e 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -134,17 +134,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + * | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + * | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| * |Brite | | | | | | | Prev | Stop | Slct | Mute | * `-----------------------------------------------------------------------------------' */ [_RAISE] = { {KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_MINS, KC_PIPE}, - {KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_DOT, KC_BSLS}, + {KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE}, + {KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS}, {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MSTP, KC_MSEL, KC_MUTE} }, diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index f7daf53d84..de2096954b 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -61,9 +61,9 @@ keys at the far left are for quick access to beginning and end of line in vim. ,-----------------------------------------------------------------------------------. | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| - | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | | |------+------+------+------+------+------|------+------+------+------+------+------| - | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ | |------+------+------+------+------+------+------+------+------+------+------+------| |Brite | | | | | | | Prev | Stop | Slct | Mute | `-----------------------------------------------------------------------------------' -- cgit v1.2.3 From 9a4e72fa7175f0ef3b31c6a6036ac1a5010dc6c1 Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Mon, 1 Aug 2016 22:02:39 -0700 Subject: Add CmdSlash to TouchCursor Layer --- keyboards/planck/keymaps/jeebak/keymap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index e39887394e..0a6b9cfa0f 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -40,6 +40,7 @@ enum macro_keycodes { KC_ALT_TAB, KC_CMD_TAB, KC_CTL_TAB, + KC_CMD_SLSH, }; // Fillers to make layering more clear @@ -55,6 +56,7 @@ enum macro_keycodes { #define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab #define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab #define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab +#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -166,7 +168,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_TOUCHCURSOR] = { {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, {_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, - {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, _______, _______}, + {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, CMD_SLSH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -352,6 +354,8 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); case KC_CTL_TAB: return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); + case KC_CMD_SLSH: + return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END )); } return MACRO_NONE; -- cgit v1.2.3 From 7db1d7902bfb7044b899859d95846fa92bad61db Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Wed, 3 Aug 2016 20:00:54 -0700 Subject: Workaround for KC_COPY, etc. based on current AG_NORM/AG_SWAP setting --- keyboards/planck/keymaps/jeebak/keymap.c | 47 ++++++++++++++++++++++++++++--- keyboards/planck/keymaps/jeebak/readme.md | 12 ++++---- 2 files changed, 50 insertions(+), 9 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 0a6b9cfa0f..25918dc985 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -41,6 +41,12 @@ enum macro_keycodes { KC_CMD_TAB, KC_CTL_TAB, KC_CMD_SLSH, + KC_AG_FIND, + KC_AG_AGAIN, + KC_AG_UNDO, + KC_AG_CUT, + KC_AG_COPY, + KC_AG_PASTE, }; // Fillers to make layering more clear @@ -57,6 +63,12 @@ enum macro_keycodes { #define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab #define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab #define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility) +#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings +#define AG_AGAIN M(KC_AG_AGAIN) +#define AG_UNDO M(KC_AG_UNDO) +#define AG_CUT M(KC_AG_CUT) +#define AG_COPY M(KC_AG_COPY) +#define AG_PASTE M(KC_AG_PASTE) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -167,8 +179,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_TOUCHCURSOR] = { {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, - {_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, - {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, CMD_SLSH,_______}, + {_______, KC_LALT, KC_SPC, _______, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, + {_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, CMD_SLSH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -347,15 +359,42 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { */ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc. + // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in: + // quantum/quantum.c + if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) { + use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc. + } + switch (id) { case KC_ALT_TAB: - return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); + if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } case KC_CMD_TAB: - return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); + if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + case KC_CTL_TAB: return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); case KC_CMD_SLSH: return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END )); + + case KC_AG_FIND: + return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END ); + case KC_AG_AGAIN: + return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END ); + case KC_AG_UNDO: + return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END ); + case KC_AG_CUT: + return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END ); + case KC_AG_COPY: + return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END ); + case KC_AG_PASTE: + return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END ); } return MACRO_NONE; diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index de2096954b..094bc2a0ed 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -77,15 +77,17 @@ are represented below. My personalizations include all of the keys shown for the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key from the base layers) readily accessible from the home row allows quick word jumps and highlighting when used in conjunction with the arrow keys. The -`AltTab` macro is not only useful under Windows, but also under Mac when used +`Alt-Tab` macro is not only useful under Windows, but also under Mac when used with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch). -The `CmdTab` and `CtlTab` sequences are duplicated for easy access while in +The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` -keycodes have been mapped but they don't seem to work on Mac. Presumably -they'll work under Windows. +keycodes do not seem to work. There are macros in place that'll "automatically" +choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, +etc.) depending on which layout you've currently selected (`AG_NORM` or +`AG_SWAP`) in the `_ADJUST` layer. ``` ,-----------------------------------------------------------------------------------. - |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | + |CmdTab|AltTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | |------+------+------+------+------+------|------+------+------+------+------+------| -- cgit v1.2.3 From 36abd4463fec1623e7eb590bb7960c6655cf2b70 Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Thu, 4 Aug 2016 14:26:03 -0700 Subject: Revert swapp of AltTab/CmdTab in readme. Layout did not change --- keyboards/planck/keymaps/jeebak/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 094bc2a0ed..48eb23264f 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -87,7 +87,7 @@ etc.) depending on which layout you've currently selected (`AG_NORM` or `AG_SWAP`) in the `_ADJUST` layer. ``` ,-----------------------------------------------------------------------------------. - |CmdTab|AltTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | + |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | |------+------+------+------+------+------|------+------+------+------+------+------| -- cgit v1.2.3 From dcf672223f20412ae79eb73a58d80ccbb0bd5c31 Mon Sep 17 00:00:00 2001 From: Toni Date: Fri, 5 Aug 2016 20:53:58 +0200 Subject: enterfn / enterisctrl on hold added --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 7af7c14bd8..3ee141eb45 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------. * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 !! + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 * |-----------------------------------------------------------| * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | * |-----------------------------------------------------------| @@ -107,15 +107,15 @@ enum function_id { }; const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_FUNCTION(LAUNCH), - [2] = ACTION_FUNCTION(RGBLED_TOGGLE), - [3] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [1] = ACTION_FUNCTION(LAUNCH), + [2] = ACTION_FUNCTION(RGBLED_TOGGLE), + [3] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), }; -- cgit v1.2.3 From 545925fb1b92252fe0bad5a675727d52bea161ef Mon Sep 17 00:00:00 2001 From: Seth Chandler Date: Fri, 5 Aug 2016 23:19:12 -0400 Subject: remove orphaned clueboard files --- keyboards/clueboard2/Makefile | 71 --------------------------------------- keyboards/clueboard2/clueboard2.c | 63 ---------------------------------- 2 files changed, 134 deletions(-) delete mode 100644 keyboards/clueboard2/Makefile delete mode 100644 keyboards/clueboard2/clueboard2.c (limited to 'keyboards') diff --git a/keyboards/clueboard2/Makefile b/keyboards/clueboard2/Makefile deleted file mode 100644 index e9367a90d0..0000000000 --- a/keyboards/clueboard2/Makefile +++ /dev/null @@ -1,71 +0,0 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID - -ifndef QUANTUM_DIR - include ../../Makefile -endif diff --git a/keyboards/clueboard2/clueboard2.c b/keyboards/clueboard2/clueboard2.c deleted file mode 100644 index d78ffed9ba..0000000000 --- a/keyboards/clueboard2/clueboard2.c +++ /dev/null @@ -1,63 +0,0 @@ -#include "clueboard2.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1< Date: Fri, 5 Aug 2016 23:31:35 -0700 Subject: Mouse layer updates - Rename to MOUSECURSOR - Use "d" key, since middle finger is stronger than pinky - Shuffle some mouse buttons around --- keyboards/planck/keymaps/jeebak/keymap.c | 32 +++++++++++++++---------------- keyboards/planck/keymaps/jeebak/readme.md | 14 +++++++------- 2 files changed, 23 insertions(+), 23 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 25918dc985..4a3cc2d562 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -21,7 +21,7 @@ extern keymap_config_t keymap_config; #define _RAISE 4 #define _PLOVER 5 #define _TOUCHCURSOR 6 -#define _MOUSE 7 +#define _MOUSECURSOR 7 #define _ADJUST 16 // Keycodes @@ -57,8 +57,8 @@ enum macro_keycodes { #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift // Requires KC_TRNS/_______ for the trigger key in the destination layer -#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor. -#define LT_ML LT(_MOUSE, KC_A) // L-ayer T-ap M-ouse C-ursor (on A) +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor #define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab #define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab #define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab @@ -76,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------------. * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | S | D | F | G | H | J | K | L | ; | " | + * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L | ; | " | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | N | M | , | . | / |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -85,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTY] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {CTL_ESC, LT_ML, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -94,7 +94,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------------. * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | R | S | T | D | H | N | E | I | O | " | + * | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | K | M | , | . | / |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -103,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_COLEMAK] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, - {CTL_ESC, LT_ML, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {CTL_ESC, KC_A, KC_R, LT_MC(KC_S),KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -112,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------------. * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | ML/A | O | E | U | I | D | H | T | N | S | / | + * | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | ; | Q | J | K | X | B | M | W | V | Z |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -121,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_DVORAK] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, - {CTL_ESC, LT_ML, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {CTL_ESC, KC_A, KC_O, LT_MC(KC_E),KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -186,20 +186,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Mouse Layer * ,-----------------------------------------------------------------------------------. - * | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + * | | |ACCL0 | |ACCL1 | | |WHL_L | Up |WHL_R | BTN2 | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + * | |ACCL2 | BTN2 | | BTN1 | |WHL_Up| Left | Down |Right | BTN4 | BTN5 | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + * | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_MOUSE] = { - {_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_ACL2, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, - {_______, _______, _______, KC_BTN3, KC_BTN1, KC_BTN4, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______}, - {_______, _______, _______, _______, KC_BTN2, KC_BTN5, KC_WH_D, KC_BTN1, _______, _______, _______, _______}, +[_MOUSECURSOR] = { + {_______, _______, KC_ACL0, _______, KC_ACL1, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, + {_______, KC_ACL2, KC_BTN2, _______, KC_BTN1, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5}, + {_______, _______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 48eb23264f..0f2c9e26d2 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -99,19 +99,19 @@ etc.) depending on which layout you've currently selected (`AG_NORM` or ## Mouse Layer The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. -The `A` key is used to activate this layer. All 16 keycodes for the mouse from -the `doc/keycode.txt` file are represented, and logically located, IMHO. The -left and right click buttons are duplicated; on the right hand side, for a -quick click here and there, and again on the left hand side for when the +The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the +mouse from the `doc/keycode.txt` file are represented, and logically located, +IMHO. The left and right click buttons are duplicated; on the right hand side, +for a quick click here and there, and again on the left hand side for when the buttons need to be held for dragging things or highlighting text, thus allowing the right hand to be free to use the up/down/left/right actions. ``` ,-----------------------------------------------------------------------------------. - | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + | | |ACCL0 | |ACCL1 | | |WHL_L | Up |WHL_R | BTN2 | | |------+------+------+------+------+-------------+------+------+------+------+------| - | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + | |ACCL2 | BTN2 | | BTN1 | |WHL_Up| Left | Down |Right | BTN4 | BTN5 | |------+------+------+------+------+------|------+------+------+------+------+------| - | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -- cgit v1.2.3 From 96ed96f924d7df610465b567e5127e73e99a368d Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sat, 6 Aug 2016 00:01:12 -0700 Subject: Fix KC_ALT_TAB/KC_CMD_TAB logic --- keyboards/planck/keymaps/jeebak/keymap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 4a3cc2d562..3b51e34e38 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -372,11 +372,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) switch (id) { case KC_ALT_TAB: - if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } - else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } - case KC_CMD_TAB: if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + case KC_CMD_TAB: + if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); } + else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); } case KC_CTL_TAB: return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END )); -- cgit v1.2.3 From 57218827cbdb6e9510147239f69b8aa62e28cd14 Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sat, 6 Aug 2016 00:08:42 -0700 Subject: Move KC_ACL1 button --- keyboards/planck/keymaps/jeebak/keymap.c | 8 ++++---- keyboards/planck/keymaps/jeebak/readme.md | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 3b51e34e38..c5761b2d1d 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -186,9 +186,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Mouse Layer * ,-----------------------------------------------------------------------------------. - * | | |ACCL0 | |ACCL1 | | |WHL_L | Up |WHL_R | BTN2 | | + * | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | |ACCL2 | BTN2 | | BTN1 | |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + * | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -197,8 +197,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_MOUSECURSOR] = { - {_______, _______, KC_ACL0, _______, KC_ACL1, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, - {_______, KC_ACL2, KC_BTN2, _______, KC_BTN1, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5}, + {_______, _______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, + {_______, KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5}, {_______, _______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 0f2c9e26d2..359aacff97 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -107,9 +107,9 @@ buttons need to be held for dragging things or highlighting text, thus allowing the right hand to be free to use the up/down/left/right actions. ``` ,-----------------------------------------------------------------------------------. - | | |ACCL0 | |ACCL1 | | |WHL_L | Up |WHL_R | BTN2 | | + | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | |------+------+------+------+------+-------------+------+------+------+------+------| - | |ACCL2 | BTN2 | | BTN1 | |WHL_Up| Left | Down |Right | BTN4 | BTN5 | + | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 | |------+------+------+------+------+------|------+------+------+------+------+------| | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | | |------+------+------+------+------+------+------+------+------+------+------+------| -- cgit v1.2.3 From bda4d15ffa5a7390591b2f4edb05ed568a1c708a Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sat, 6 Aug 2016 11:59:57 -0700 Subject: Add Virtual Desktop Switching macros to TouchCursor layer --- keyboards/planck/keymaps/jeebak/keymap.c | 13 +++++++++++-- keyboards/planck/keymaps/jeebak/readme.md | 5 +++-- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index c5761b2d1d..aa5c415938 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -47,6 +47,8 @@ enum macro_keycodes { KC_AG_CUT, KC_AG_COPY, KC_AG_PASTE, + KC_AG_DESK_L, + KC_AG_DESK_R, }; // Fillers to make layering more clear @@ -69,6 +71,8 @@ enum macro_keycodes { #define AG_CUT M(KC_AG_CUT) #define AG_COPY M(KC_AG_COPY) #define AG_PASTE M(KC_AG_PASTE) +#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and +#define AG_D_R M(KC_AG_DESK_R) // Right const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -166,7 +170,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| * |------+------+------+------+------+------|------+------+------+------+------+------| * | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -179,7 +183,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_TOUCHCURSOR] = { {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, - {_______, KC_LALT, KC_SPC, _______, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, + {_______, KC_LALT, KC_SPC, _______, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R }, {_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, CMD_SLSH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -395,6 +399,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END ); case KC_AG_PASTE: return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END ); + + case KC_AG_DESK_L: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END ); + case KC_AG_DESK_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END ); } return MACRO_NONE; diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 359aacff97..28ae34f475 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -84,12 +84,13 @@ this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN` keycodes do not seem to work. There are macros in place that'll "automatically" choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, etc.) depending on which layout you've currently selected (`AG_NORM` or -`AG_SWAP`) in the `_ADJUST` layer. +`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I +use to switch between Virtual Desktops Left/Right. ``` ,-----------------------------------------------------------------------------------. |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| - | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + | | Alt |Space | | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| |------+------+------+------+------+------|------+------+------+------+------+------| | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | |------+------+------+------+------+------+------+------+------+------+------+------| -- cgit v1.2.3 From 68e287013b42cea53a1834c141bdf2c0802da3af Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sat, 6 Aug 2016 13:36:26 -0700 Subject: Add Tab Close, New, Reopen macros to TouchCursor layer --- keyboards/planck/keymaps/jeebak/keymap.c | 21 +++++++++++++++++---- keyboards/planck/keymaps/jeebak/readme.md | 8 +++++--- 2 files changed, 22 insertions(+), 7 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index aa5c415938..7dc8760ec4 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -49,6 +49,9 @@ enum macro_keycodes { KC_AG_PASTE, KC_AG_DESK_L, KC_AG_DESK_R, + KC_AG_TAB_C, + KC_AG_TAB_N, + KC_AG_TAB_R, }; // Fillers to make layering more clear @@ -73,6 +76,9 @@ enum macro_keycodes { #define AG_PASTE M(KC_AG_PASTE) #define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and #define AG_D_R M(KC_AG_DESK_R) // Right +#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close, +#define AG_T_N M(KC_AG_TAB_N) // Tab New, and +#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -170,9 +176,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| + * | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + * | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' @@ -183,8 +189,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_TOUCHCURSOR] = { {ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, - {_______, KC_LALT, KC_SPC, _______, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R }, - {_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, CMD_SLSH,_______}, + {_______, KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R }, + {_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R, CMD_SLSH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -404,6 +410,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END ); case KC_AG_DESK_R: return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END ); + + case KC_AG_TAB_C: + return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END ); + case KC_AG_TAB_N: + return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END ); + case KC_AG_TAB_R: + return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END ); } return MACRO_NONE; diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 28ae34f475..b43f8a2fba 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -85,14 +85,16 @@ keycodes do not seem to work. There are macros in place that'll "automatically" choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`, etc.) depending on which layout you've currently selected (`AG_NORM` or `AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I -use to switch between Virtual Desktops Left/Right. +use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and +`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as +Google Chrome. ``` ,-----------------------------------------------------------------------------------. |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| - | | Alt |Space | | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| + | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R| |------+------+------+------+------+------|------+------+------+------+------+------| - | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -- cgit v1.2.3 From b5fcb5a7447424a160b86b4d2c0d2ea29ae1d813 Mon Sep 17 00:00:00 2001 From: Toni Date: Sun, 7 Aug 2016 11:37:28 +0200 Subject: new variant with the curly braces on tab layer --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 48 +++++++++++------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 3ee141eb45..71c205a489 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -27,11 +27,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' LEFT DWN RIGHT */ [_DEF] = KEYMAP_ISO_SPLITRSHIFT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - LT(_TAB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, CTL_T(KC_ENT), \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), SFT_T(KC_UP), \ - KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN), CTL_T(KC_RIGHT)), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + LT(_TAB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, CTL_T(KC_ENT), \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), SFT_T(KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN), CTL_T(KC_RIGHT)), /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) * ,-----------------------------------------------------------. @@ -39,27 +39,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------| * | |Paus| Up| [ | ] | | | | ( | ) | | | | | * |-----------------------------------------------------------| - * | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY | + * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | * |-----------------------------------------------------------| - * | | | | | < | > | |M0 | | { | } | | Vol+ | | + * | | | | | < | > | |M0 | | | | | Vol+ | | * |-----------------------------------------------------------| * | | | | |Alt |Prev|Vol-|Next| * `-----------------------------------------------------------' */ [_SPC] = KEYMAP_ISO_SPLITRSHIFT( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) * ,-----------------------------------------------------------. * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE * |-----------------------------------------------------------| - * | | | | | | | | | | | | | | | + * | | | | | | | | | { | } | | | | | * |-----------------------------------------------------------| - * | | | | | | | |Pos1|PgDn|PgUp|End| |Retrn | + * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | * |-----------------------------------------------------------| * | | | | | | | |AF2| | | | | PgUp | | * |-----------------------------------------------------------| @@ -67,11 +67,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_TAB] = KEYMAP_ISO_SPLITRSHIFT( - KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) * ,-----------------------------------------------------------. @@ -87,11 +87,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_SFX] = KEYMAP_ISO_SPLITRSHIFT( - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ - KC_TRNS, F(2), F(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ - KC_TRNS, F(4), F(5), F(6), F(7), F(8), F(9), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ + KC_TRNS, F(2), F(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ + KC_TRNS, F(4), F(5), F(6), F(7), F(8), F(9), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), }; enum function_id { -- cgit v1.2.3 From 3d86e5b7a796e8d574107109708ed873405a77dc Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sun, 7 Aug 2016 11:05:10 -0700 Subject: Tap for Tab, hold for Hyper --- keyboards/planck/keymaps/jeebak/keymap.c | 13 +++++---- keyboards/planck/keymaps/jeebak/readme.md | 46 +++++++++++++++++-------------- 2 files changed, 32 insertions(+), 27 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 7dc8760ec4..8541ecd8d5 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -61,6 +61,7 @@ enum macro_keycodes { // Custom macros #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper // Requires KC_TRNS/_______ for the trigger key in the destination layer #define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor #define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor @@ -84,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * | Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L | ; | " | * |----------+------+------+------+------+------|------+------+------+------+------+--------| @@ -94,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_QWERTY] = { - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} @@ -102,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Colemak * ,-----------------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * | Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| * | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " | * |----------+------+------+------+------+------|------+------+------+------+------+--------| @@ -112,7 +113,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_COLEMAK] = { - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {CTL_ESC, KC_A, KC_R, LT_MC(KC_S),KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} @@ -120,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Dvorak * ,-----------------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * | Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| * | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / | * |----------+------+------+------+------+------|------+------+------+------+------+--------| @@ -130,7 +131,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------------' */ [_DVORAK] = { - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, {CTL_ESC, KC_A, KC_O, LT_MC(KC_E),KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index b43f8a2fba..8635679047 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -16,32 +16,36 @@ I also decided to change all calls to `persistant_default_layer_set()` to ## Base Layers (Qwerty/Colemak/Dvorak) These base layers are mostly the same as the default mappings. The interesting -changes are shown below. The `Ctrl/Esc`, mapped using `CTL_T(KC_ESC)` will emit -an `Escape` when tapped, and act as a `Control` key when held. A `TODO` item is -to see if it can also act as a `CapsLock` when double-tapped. The right shift -key acts as `Enter` when tapped, and as a `Shift` key when held. The arrow -keys, which have been moved to the +changes are shown below. + +- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held. +- The `Sft/Ent` as `Enter` and `Shift`, and +- The `Hyper/Tab` as `Tab` and `Hyper` + +A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped. +The arrow keys, which have been moved to the [TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been -replaced with the Media keys as shown. The `ML/A` key activates the Mouse layer -when held, and emits an `A` when tapped. +replaced with the Media keys as shown. The `MC/kc` key activates the +`MouseCursor` layer when held, and emits the corresponding `kc` for its layer, +when tapped. ``` ,-----------------------------------------------------------------------------------------. - | | | | | | | | | | | | | + | Hyper/Tab| | | | | | | | | | | | |----------+------+------+------+------+-------------+------+------+------+------+--------| - | Ctrl/Esc | ML/A | | | | | | | | | | | + | Ctrl/Esc | | |MC/kc | | | | | | | | | |----------+------+------+------+------+------|------+------+------+------+------+--------| | | | | | | | | | | | |Sft/Ent | |----------+------+------+------+------+------+------+------+------+------+------+--------| | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | `-----------------------------------------------------------------------------------------' -``` - +``` + ## Lower Layer (Symbols and Function Keys) The symbols and functions keys are essentially the same as the default mapping. The most notable changes are that the symbol keys from the `RAISE` layer have been moved here. The remaining Media keys replace those that are now on the base layers. The `BACKLIT` key has also been moved here. -``` +``` ,-----------------------------------------------------------------------------------. | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| @@ -51,13 +55,13 @@ base layers. The `BACKLIT` key has also been moved here. |------+------+------+------+------+------+------+------+------+------+------+------| |Brite | | | | | | | Prev | Stop | Slct | Mute | `-----------------------------------------------------------------------------------' -``` - +``` + ## Raise Layer (Numbers and Arithmetic Operators) All of the numbers and arithmetic operators are available on this layer. Some keys are duplicated for the convenience of their positions. The `0` and `$` keys at the far left are for quick access to beginning and end of line in vim. -``` +``` ,-----------------------------------------------------------------------------------. | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| @@ -67,8 +71,8 @@ keys at the far left are for quick access to beginning and end of line in vim. |------+------+------+------+------+------+------+------+------+------+------+------| |Brite | | | | | | | Prev | Stop | Slct | Mute | `-----------------------------------------------------------------------------------' -``` - +``` + ## TouchCursor layer plus personal customizations [TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key as the modifier, with the `IJKL` home row keys representing the inverted-T of @@ -88,7 +92,7 @@ etc.) depending on which layout you've currently selected (`AG_NORM` or use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and `Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as Google Chrome. -``` +``` ,-----------------------------------------------------------------------------------. |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | | |------+------+------+------+------+-------------+------+------+------+------+------| @@ -98,7 +102,7 @@ Google Chrome. |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -``` +``` ## Mouse Layer The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. @@ -108,7 +112,7 @@ IMHO. The left and right click buttons are duplicated; on the right hand side, for a quick click here and there, and again on the left hand side for when the buttons need to be held for dragging things or highlighting text, thus allowing the right hand to be free to use the up/down/left/right actions. -``` +``` ,-----------------------------------------------------------------------------------. | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | | |------+------+------+------+------+-------------+------+------+------+------+------| @@ -118,4 +122,4 @@ the right hand to be free to use the up/down/left/right actions. |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' -``` +``` -- cgit v1.2.3 From ef83f1d04f4cf85c1922632b8a759fe67a5b24cb Mon Sep 17 00:00:00 2001 From: JeeBak Kim Date: Sun, 7 Aug 2016 12:44:45 -0700 Subject: Tap for ;, hold for GUI, tap for ", hold for Alt --- keyboards/planck/keymaps/jeebak/keymap.c | 6 ++++-- keyboards/planck/keymaps/jeebak/readme.md | 10 ++++++---- 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c index 8541ecd8d5..cb7ccb5884 100644 --- a/keyboards/planck/keymaps/jeebak/keymap.c +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -62,6 +62,8 @@ enum macro_keycodes { #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift #define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper +#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI +#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt // Requires KC_TRNS/_______ for the trigger key in the destination layer #define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor #define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor @@ -87,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------------. * | Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp | * |----------+------+------+------+------+-------------+------+------+------+------+--------| - * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L | ; | " | + * | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" | * |----------+------+------+------+------+------|------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | N | M | , | . | / |Sft/Ent | * |----------+------+------+------+------+------+------+------+------+------+------+--------| @@ -96,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTY] = { {HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md index 8635679047..e1dd1dca51 100644 --- a/keyboards/planck/keymaps/jeebak/readme.md +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -18,9 +18,11 @@ I also decided to change all calls to `persistant_default_layer_set()` to These base layers are mostly the same as the default mappings. The interesting changes are shown below. -- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held. -- The `Sft/Ent` as `Enter` and `Shift`, and -- The `Hyper/Tab` as `Tab` and `Hyper` +- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held, +- `GUI/;` as `;` and `GUI`, +- `Alt/"` as `"` and `Alt`, +- `Sft/Ent` as `Enter` and `Shift`, and +- `Hyper/Tab` as `Tab` and `Hyper` A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped. The arrow keys, which have been moved to the @@ -32,7 +34,7 @@ when tapped. ,-----------------------------------------------------------------------------------------. | Hyper/Tab| | | | | | | | | | | | |----------+------+------+------+------+-------------+------+------+------+------+--------| - | Ctrl/Esc | | |MC/kc | | | | | | | | | + | Ctrl/Esc | | |MC/kc | | | | | | |GUI/; | Alt/" | |----------+------+------+------+------+------|------+------+------+------+------+--------| | | | | | | | | | | | |Sft/Ent | |----------+------+------+------+------+------+------+------+------+------+------+--------| -- cgit v1.2.3 From 76cd7c5444471c7fbf0f648088cac13f4c79af57 Mon Sep 17 00:00:00 2001 From: Corey Finley Date: Fri, 5 Aug 2016 09:08:55 -0400 Subject: Adds keymap based on Kinesis advantage --- keyboards/preonic/keymaps/kinesis/Makefile | 27 ++++++ keyboards/preonic/keymaps/kinesis/config.h | 92 ++++++++++++++++++ keyboards/preonic/keymaps/kinesis/keymap.c | 144 ++++++++++++++++++++++++++++ keyboards/preonic/keymaps/kinesis/readme.md | 1 + 4 files changed, 264 insertions(+) create mode 100644 keyboards/preonic/keymaps/kinesis/Makefile create mode 100644 keyboards/preonic/keymaps/kinesis/config.h create mode 100644 keyboards/preonic/keymaps/kinesis/keymap.c create mode 100644 keyboards/preonic/keymaps/kinesis/readme.md (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/kinesis/Makefile b/keyboards/preonic/keymaps/kinesis/Makefile new file mode 100644 index 0000000000..6c8d2897cd --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/Makefile @@ -0,0 +1,27 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +TAP_DANCE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h new file mode 100644 index 0000000000..086baa84ff --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -0,0 +1,92 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Preonic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +#define TAPPING_TERM 200 + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c new file mode 100644 index 0000000000..1cd6eb9938 --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/keymap.c @@ -0,0 +1,144 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE +#include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _FN 1 +#define _ULCK 2 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define HYP_TIC ALL_T(KC_GRV) +#define EQ_LOCK TD(TD_EQ_LOCK) +#define MIN_ULK TD(TD_MIN_ULOCK) + +//Tap Dance Declarations +enum { + TD_EQ_LOCK = 0, + TD_MIN_ULOCK +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | FN | ` | Alt | LGUI | Back | ESC |ENTER | SPCE | RGUI | [ | ] | FN | + * `-----------------------------------------------------------------------------------' + */ + [_QWERTY] = { + {EQ_LOCK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, MIN_ULK }, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS }, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + {KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC }, + {MO(_FN), HYP_TIC, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, KC_RGUI, KC_LBRC, KC_RBRC, MO(_FN) } + }, + + /* Fn + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | VOL- | VOL+ | MUTE |BLtogg| | LEFT | DOWN | UP | RGHT | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | BL- | BL+ |Aud on|AudOff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|MusOff| | |PLY/PS| | PREV | NEXT | | + * `-----------------------------------------------------------------------------------' + */ + [_FN] = { + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______ }, + {_______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______ }, + {_______, KC_VOLD, KC_VOLU, KC_MUTE, BL_TOGG, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______ }, + {_______, BL_DEC, BL_INC, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______ }, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, KC_MPLY, _______, KC_MPRV, KC_MNXT, _______ } + } + +}; + +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {*/ + /*return true;*/ + /*[>switch (keycode) {<]*/ + /*[>case QWERTY:<]*/ + /*[>return true;<]*/ + /*[>}<]*/ +/*};*/ + +void matrix_init_user(void) { + startup_user(); +} + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + + +const qk_tap_dance_action_t tap_dance_actions[] = { + //Tap once for equal, twice for hyper + X (alfred lock) + [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, HYPR(KC_X)), + //Tap once for minus, twice for time.heals.nothing + [TD_MIN_ULOCK] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, M(_ULCK)) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _ULCK: + if (record->event.pressed) { + /* time.heals.nothing */ + return MACRO( I(220), T(T), T(I), T(M), T(E), T(DOT), T(H), T(E), T(A), T(L), T(S), T(DOT), T(N), T(O), T(T), T(H), T(I), T(N), T(G), END); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/preonic/keymaps/kinesis/readme.md b/keyboards/preonic/keymaps/kinesis/readme.md new file mode 100644 index 0000000000..e911968dd9 --- /dev/null +++ b/keyboards/preonic/keymaps/kinesis/readme.md @@ -0,0 +1 @@ +# The default Preonic layout - largely based on the Planck's \ No newline at end of file -- cgit v1.2.3 From e85bf50e1acb9d5d3117e8b57ab6178eba00debb Mon Sep 17 00:00:00 2001 From: skullY Date: Mon, 8 Aug 2016 13:43:24 -0700 Subject: Clueboard: Add some readme.md files and do some minor cleanup. --- keyboards/clueboard/Makefile | 2 +- keyboards/clueboard/config.h | 3 - keyboards/clueboard/keymaps/default/keymap.c | 8 --- keyboards/clueboard/keymaps/skully/readme.md | 5 ++ keyboards/clueboard/readme.md | 95 +++++++++++++++++++++++++++- keyboards/clueboard/rev2/config.h | 2 +- 6 files changed, 101 insertions(+), 14 deletions(-) create mode 100644 keyboards/clueboard/keymaps/skully/readme.md (limited to 'keyboards') diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile index ccc01ea9a7..e6b13f955a 100644 --- a/keyboards/clueboard/Makefile +++ b/keyboards/clueboard/Makefile @@ -90,7 +90,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options -# comment out to disable the options. +# change to no to disable the options. # BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) diff --git a/keyboards/clueboard/config.h b/keyboards/clueboard/config.h index ceac80795b..ad68323856 100644 --- a/keyboards/clueboard/config.h +++ b/keyboards/clueboard/config.h @@ -29,9 +29,6 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 896bc7ebcc..01f158bf0f 100644 --- a/keyboards/clueboard/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -66,19 +66,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `----------------------------------------------------------------------------------' */ [_RS] = KEYMAP( - #ifdef RGBLIGHT_ENABLE KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), - #else - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), - #endif }; enum function_id { diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard/keymaps/skully/readme.md new file mode 100644 index 0000000000..20ac1e4f83 --- /dev/null +++ b/keyboards/clueboard/keymaps/skully/readme.md @@ -0,0 +1,5 @@ +# The Maximized Clueboard Layout + +This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. + +The most notable change from the default layout is putting Ctrl on the Capslock key. I also swap Alt and Cmd because I mostly use a Mac day to day. diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md index aa301f020c..6c29c09eca 100644 --- a/keyboards/clueboard/readme.md +++ b/keyboards/clueboard/readme.md @@ -1,4 +1,97 @@ Clueboard keyboard firmware ====================== -TODO: to be updated. +DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co). + +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex: + +``` +$ make +``` + +You will see a lot of output and if everything worked correctly you will see something similar to this: + +``` +Size after: + text data bss dec hex filename + 0 19992 0 19992 4e18 clueboard_rev2_default.hex +``` + +At this point you can press RESET on your Clueboard and flash your keyboard with this command: + +``` +$ make dfu +``` + +If you would like to use one of the alternative keymaps, or create your own, see below. + +## Clueboard 1.0 + +If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `SUBPROJECT=rev1` to your make command, like this: + +``` +$ make SUBPROJECT=rev1 +``` + +And when flashing your keyboard: + +``` +$ make SUBPROJECT=rev1 dfu +``` + +If you are flashing an alternative layout to your rev1, include both `SUBPROJECT=rev1` and `KEYMAP=` in your command, for example when flashing max: + +``` +$ make SUBPROJECT=rev1 KEYMAP=max dfu +``` + +## Alternate Keymaps + +There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `KEYMAP=` to your command: + +``` +$ make KEYMAP=skully +``` + +And when flashing your keyboard, put `KEYMAP=` between "make" and "dfu": + +``` +$ make KEYMAP=skully dfu +``` + +### Notable Layouts + +These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first: + +* [keymaps/default](keymaps/default) - The default Clueboard layout +* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB. +* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards. + +## Create Your Own Keymap + +There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: + +* Copy `[keymaps/default](keymaps/default/)` to `keymaps/`. +* Compile the firmware (`$ make KEYMAP=`) +* Flash the firmware (`$ make KEYMAP= dfu`) +* Make sure everything works like the default keyboard +* Modify `keymaps//readme.md` to tell others about your layout. +* Modify `keymaps//keymap.c` to reflect your desired layout. +* Compile your new custom firmware (`$ make KEYMAP=`) +** If you have warnings you may flash without fixing them, but something may not work right. +** If you have any errors you must fix them before continuing. +* Flash the firmware (`$ make KEYMAP= dfu`) + +## Share Your Keymap + +Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request: + +* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great. +* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that +* If your layout requires special hardware to be added, please describe that in the readme.md + +TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :) diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 02982ff299..15ca4ece86 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -36,4 +36,4 @@ #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 -#endif \ No newline at end of file +#endif -- cgit v1.2.3 From d561f63bd14b8ea2e6d8b26a1ba46a1e8503c5bd Mon Sep 17 00:00:00 2001 From: skullY Date: Mon, 8 Aug 2016 13:46:55 -0700 Subject: Clueboard: Fix the title in keymaps/skully/readme.md --- keyboards/clueboard/keymaps/skully/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard/keymaps/skully/readme.md index 20ac1e4f83..c1182123d9 100644 --- a/keyboards/clueboard/keymaps/skully/readme.md +++ b/keyboards/clueboard/keymaps/skully/readme.md @@ -1,4 +1,4 @@ -# The Maximized Clueboard Layout +# skullY's Clueboard Layout This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. -- cgit v1.2.3 From adad05c3fbd511e77a77484945fa2f675d6abf8b Mon Sep 17 00:00:00 2001 From: skullY Date: Mon, 8 Aug 2016 16:11:54 -0700 Subject: Add support for the cluecard --- keyboards/cluecard/Makefile | 76 ++++++++++++ keyboards/cluecard/cluecard.c | 98 ++++++++++++++++ keyboards/cluecard/cluecard.h | 22 ++++ keyboards/cluecard/config.h | 167 +++++++++++++++++++++++++++ keyboards/cluecard/keymaps/default/Makefile | 21 ++++ keyboards/cluecard/keymaps/default/config.h | 8 ++ keyboards/cluecard/keymaps/default/keymap.c | 63 ++++++++++ keyboards/cluecard/keymaps/default/readme.md | 1 + keyboards/cluecard/readme.md | 28 +++++ 9 files changed, 484 insertions(+) create mode 100644 keyboards/cluecard/Makefile create mode 100644 keyboards/cluecard/cluecard.c create mode 100644 keyboards/cluecard/cluecard.h create mode 100644 keyboards/cluecard/config.h create mode 100644 keyboards/cluecard/keymaps/default/Makefile create mode 100644 keyboards/cluecard/keymaps/default/config.h create mode 100644 keyboards/cluecard/keymaps/default/keymap.c create mode 100644 keyboards/cluecard/keymaps/default/readme.md create mode 100644 keyboards/cluecard/readme.md (limited to 'keyboards') diff --git a/keyboards/cluecard/Makefile b/keyboards/cluecard/Makefile new file mode 100644 index 0000000000..029d0b9670 --- /dev/null +++ b/keyboards/cluecard/Makefile @@ -0,0 +1,76 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../Makefile +endif + + diff --git a/keyboards/cluecard/cluecard.c b/keyboards/cluecard/cluecard.c new file mode 100644 index 0000000000..81db252d28 --- /dev/null +++ b/keyboards/cluecard/cluecard.c @@ -0,0 +1,98 @@ +#include "cluecard.h" +#define BL_RED OCR1B +#define BL_GREEN OCR1A +#define BL_BLUE OCR1C + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +void backlight_init_ports(void) +{ + // Set B5, B6, and B7 as output + DDRB |= (1<<7)|(1<<6)|(1<<5); + + // Setup PWM + ICR1 = 0xFFFF; + TCCR1A = 0b10101010; + TCCR1B = 0b00011001; + + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; +} + +void backlight_set(uint8_t level) +{ + // Set the RGB color + switch (level) + { + case 0: + // Off + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; + break; + case 1: + // Red + BL_RED = 0x0000; + BL_GREEN = 0xFFFF; + BL_BLUE = 0xFFFF; + break; + case 2: + // Green + BL_RED = 0xFFFF; + BL_GREEN = 0x0000; + BL_BLUE = 0xFFFF; + break; + case 3: + // Blue + BL_RED = 0xFFFF; + BL_GREEN = 0xFFFF; + BL_BLUE = 0x0000; + break; + case 4: + // Magenta + BL_RED = 0x4000; + BL_GREEN = 0x4000; + BL_BLUE = 0x4000; + break; + case 5: + // Purple + BL_RED = 0x0000; + BL_GREEN = 0xFFFF; + BL_BLUE = 0x0000; + break; + case 6: + // Yellow + BL_RED = 0x0000; + BL_GREEN = 0x0000; + BL_BLUE = 0xFFFF; + break; + default: + xprintf("Unknown level: %d\n", level); + } +} diff --git a/keyboards/cluecard/cluecard.h b/keyboards/cluecard/cluecard.h new file mode 100644 index 0000000000..3342a08233 --- /dev/null +++ b/keyboards/cluecard/cluecard.h @@ -0,0 +1,22 @@ +#ifndef CLUECARD_H +#define CLUECARD_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, \ + k10, k12, \ + k20, k21, k22, \ + k11, \ + k30, k31, k32 \ +) { \ + { k00, k01, k02, }, \ + { k10, k11, k12, }, \ + { k20, k21, k22, }, \ + { k30, k31, k32, } \ +} + +#endif diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h new file mode 100644 index 0000000000..765347b131 --- /dev/null +++ b/keyboards/cluecard/config.h @@ -0,0 +1,167 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2330 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Clueboard +#define PRODUCT ATMEGA32U4 Firmware Dev Kit +#define DESCRIPTION A small board to help you hack on QMK. + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 3 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F5, F4, B4 } +#define MATRIX_COL_PINS { F1, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 20 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* Underlight configuration + */ +#define RGB_DI_PIN E6 +//#define RGBLIGHT_TIMER +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/cluecard/keymaps/default/Makefile b/keyboards/cluecard/keymaps/default/Makefile new file mode 100644 index 0000000000..8ee841da02 --- /dev/null +++ b/keyboards/cluecard/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/cluecard/keymaps/default/config.h b/keyboards/cluecard/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/cluecard/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/cluecard/keymaps/default/keymap.c b/keyboards/cluecard/keymaps/default/keymap.c new file mode 100644 index 0000000000..517afe867b --- /dev/null +++ b/keyboards/cluecard/keymaps/default/keymap.c @@ -0,0 +1,63 @@ +#include "cluecard.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + RGB_TOG, RGB_SAI, RGB_VAI, \ + RGB_HUD, RGB_HUI, \ + RGB_MOD, RGB_SAD, RGB_VAD, \ + BL_STEP, \ + F(0), F(1), F(2) \ + ) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), + [2] = ACTION_FUNCTION(2) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch (id) { + case 0: + PLAY_NOTE_ARRAY(tone_startup, false, 0); + break; + case 1: + PLAY_NOTE_ARRAY(music_scale, false, 0); + break; + case 2: + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + break; + } + } +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { +} diff --git a/keyboards/cluecard/keymaps/default/readme.md b/keyboards/cluecard/keymaps/default/readme.md new file mode 100644 index 0000000000..9e3b97beac --- /dev/null +++ b/keyboards/cluecard/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for cluecard diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md new file mode 100644 index 0000000000..ae1afbbfdd --- /dev/null +++ b/keyboards/cluecard/readme.md @@ -0,0 +1,28 @@ +cluecard keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` -- cgit v1.2.3 From 552399df4cef88463ea8ac40822d776d0fb90e18 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Mon, 8 Aug 2016 18:34:08 -0700 Subject: Adding my own keymaps to the following keyboards: Planck, Preonic, Atreus, Ergodox --- keyboards/atreus/keymaps/xyverz/keymap.c | 89 ++++++ keyboards/ergodox/keymaps/xyverz/dvorak.png | Bin 0 -> 87314 bytes keyboards/ergodox/keymaps/xyverz/keymap.c | 184 +++++++++++++ keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 +++++++++++++++++++++ keyboards/ergodox/keymaps/xyverz/readme.md | 10 + keyboards/planck/keymaps/xyverz/README.md | 2 + keyboards/planck/keymaps/xyverz/keymap.c | 379 ++++++++++++++++++++++++++ keyboards/planck/keymaps/xyverz/makefile.mk | 2 + keyboards/preonic/keymaps/xyverz/README.md | 49 ++++ keyboards/preonic/keymaps/xyverz/keymap.c | 342 +++++++++++++++++++++++ keyboards/preonic/keymaps/xyverz/makefile.mk | 1 + 11 files changed, 1369 insertions(+) create mode 100644 keyboards/atreus/keymaps/xyverz/keymap.c create mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c create mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c create mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md create mode 100644 keyboards/planck/keymaps/xyverz/README.md create mode 100644 keyboards/planck/keymaps/xyverz/keymap.c create mode 100644 keyboards/planck/keymaps/xyverz/makefile.mk create mode 100644 keyboards/preonic/keymaps/xyverz/README.md create mode 100644 keyboards/preonic/keymaps/xyverz/keymap.c create mode 100644 keyboards/preonic/keymaps/xyverz/makefile.mk (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..447fbcf10f --- /dev/null +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -0,0 +1,89 @@ +// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by +// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and +// Preonic keyboards by Jack Humbert. + +#include "atreus.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* Dvorak */ + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, + {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL), KC_B, KC_M, KC_W, KC_V, SFT_T(KC_Z) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL} + }, + [_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_CM] = { /* Colemak */ + {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_L1] = { /* LAYER 1 */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, + {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, + {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } + }, + [_L2] = { /* LAYER 2 */ + {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, + {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 }, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png new file mode 100644 index 0000000000..cb83163095 Binary files /dev/null and b/keyboards/ergodox/keymaps/xyverz/dvorak.png differ diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..dd39dbacb2 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, + MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, + KC_UP, KC_DOWN,KC_SLSH,KC_EQL, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c new file mode 100644 index 0000000000..e082372f9b --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/old_keymap.c @@ -0,0 +1,311 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +extern keymap_config_t keymap_config; + +#define _DVORAK 0 // default layer +#define _QWERTY 1 // symbols +#define _LOWER 2 +#define _RAISE 3 +#define _ADJUST 16 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* + * Keymap 0: Dvorak + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | Esc | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | Y | Y |(Null)| |(Null)| F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| FN1 | | FN2 |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + * + ***************************************************************************************************** + * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak + * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor- + * ner keys. I've decided to continue using this layout with my ErgoDox. + */ + + [_DVORAK] = ( + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, LOWER, + KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + NO, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + RAISE, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, + KC_RALT, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC +), + +/* Keymap 1: QWERTY + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +[_QWERTY] = ( + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, LOWER, + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + {ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + RAISE, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT +), + + +/* Lower 2: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[_LOWER] = ( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Raise 3: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[_RAISE] = ( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), + +/* Adjust 16: Lower + Raise + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | Reset| | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| |Dvorak|Qwerty| | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[_ADJUST] = ( + KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, QWERTY, DVORAK, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + + } + return MACRO_NONE; +}; + + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..8f6dba45e9 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -0,0 +1,10 @@ +# ErgoDox EZ Default Configuration + +## Changelog + +* Feb 2, 2016 (V1.1): + * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). + +This is what we ship with out of the factory. :) The image says it all: + +![Default](default_highres.png) diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md new file mode 100644 index 0000000000..b0054fc305 --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/README.md @@ -0,0 +1,2 @@ +# Zrevyx's Planck Layout + diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..9ac78ec15d --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/keymap.c @@ -0,0 +1,379 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MUSIC 5 +#define _PLOVER 6 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 +#define AUD_OFF M(6) +#define AUD_ON M(7) +#define MUS_OFF M(8) +#define MUS_ON M(9) +#define VC_IN M(10) +#define VC_DE M(11) +#define PLOVER M(12) +#define EXT_PLV M(13) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Music (reserved for process_action_user) + * + */ +[_MUSIC] = { + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {440.0*pow(2.0,(31)/12.0), 12}, + {440.0*pow(2.0,(28)/12.0), 8}, + {440.0*pow(2.0,(19)/12.0), 8}, + {440.0*pow(2.0,(24)/12.0), 8}, + {440.0*pow(2.0,(28)/12.0), 20} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 6: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_off(); + #endif + } + break; + case 7: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_on(); + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + } + break; + case 8: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + layer_off(_MUSIC); + stop_all_notes(); + #endif + } + break; + case 9: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(music_scale, false, 0); + layer_on(_MUSIC); + #endif + } + break; + case 10: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + case 11: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + case 12: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_off(_MUSIC); + stop_all_notes(); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + break; + case 13: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + break; + + } + return MACRO_NONE; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // stops the tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +uint8_t starting_note = 0x0C; +int offset = 7; + +void process_action_user(keyrecord_t *record) { + + if (IS_LAYER_ON(_MUSIC)) { + if (record->event.pressed) { + play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); + } else { + stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); + } + } + +} +#endif diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..99fbfbd0bb --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/makefile.mk @@ -0,0 +1,2 @@ +AUDIO_ENABLE = yes +NKRO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/README.md b/keyboards/preonic/keymaps/xyverz/README.md new file mode 100644 index 0000000000..9c23c5b9f3 --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/README.md @@ -0,0 +1,49 @@ +# The default Preonic layout - largely based on the Planck's + +## QWERTY Layer: + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | - | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ + +## LOWER Layer: + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ + +## RAISE Layer: + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ \ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..adc7392e5c --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/keymap.c @@ -0,0 +1,342 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MUSIC 5 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 +#define AUD_OFF M(6) +#define AUD_ON M(7) +#define MUS_OFF M(8) +#define MUS_ON M(9) +#define VC_IN M(10) +#define VC_DE M(11) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | - | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_MINS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Music (reserved for process_action_user) + * + */ +[_MUSIC] = { + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float start_up[][2] = { + {440.0*pow(2.0,(14)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8}, + {440.0*pow(2.0,(18)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 6: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_off(); + #endif + } + break; + case 7: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_on(); + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif + } + break; + case 8: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + layer_off(_MUSIC); + stop_all_notes(); + #endif + } + break; + case 9: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(music_scale, false, 0); + layer_on(_MUSIC); + #endif + } + break; + case 10: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + case 11: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE + +uint8_t starting_note = 0x0C; +int offset = 7; + +void process_action_user(keyrecord_t *record) { + + if (IS_LAYER_ON(_MUSIC)) { + if (record->event.pressed) { + play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); + } else { + stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); + } + } + +} + +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +#endif \ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..628167ff66 --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/makefile.mk @@ -0,0 +1 @@ +AUDIO_ENABLE = yes \ No newline at end of file -- cgit v1.2.3 From de1db144d06b488937633110b0598a1cac68f4fc Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:44:09 -0700 Subject: Delete dvorak.png Not reflective of my layout. --- keyboards/ergodox/keymaps/xyverz/dvorak.png | Bin 87314 -> 0 bytes 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/dvorak.png (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/xyverz/dvorak.png b/keyboards/ergodox/keymaps/xyverz/dvorak.png deleted file mode 100644 index cb83163095..0000000000 Binary files a/keyboards/ergodox/keymaps/xyverz/dvorak.png and /dev/null differ -- cgit v1.2.3 From bf93fa510bcc5cec84bcd9d81cb8fae6beb1ebb4 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:46:34 -0700 Subject: Delete readme.md file cleanup, removing file that doesn't apply to my layout. --- keyboards/ergodox/keymaps/xyverz/readme.md | 10 ---------- 1 file changed, 10 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/readme.md (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md deleted file mode 100644 index 8f6dba45e9..0000000000 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# ErgoDox EZ Default Configuration - -## Changelog - -* Feb 2, 2016 (V1.1): - * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). - -This is what we ship with out of the factory. :) The image says it all: - -![Default](default_highres.png) -- cgit v1.2.3 From c060afe68eb729fd3afcfdb3f16e28730ab868b3 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:47:13 -0700 Subject: Delete old_keymap.c file cleanup --- keyboards/ergodox/keymaps/xyverz/old_keymap.c | 311 -------------------------- 1 file changed, 311 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/old_keymap.c (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/xyverz/old_keymap.c b/keyboards/ergodox/keymaps/xyverz/old_keymap.c deleted file mode 100644 index e082372f9b..0000000000 --- a/keyboards/ergodox/keymaps/xyverz/old_keymap.c +++ /dev/null @@ -1,311 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" - -extern keymap_config_t keymap_config; - -#define _DVORAK 0 // default layer -#define _QWERTY 1 // symbols -#define _LOWER 2 -#define _RAISE 3 -#define _ADJUST 16 - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* - * Keymap 0: Dvorak - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | Esc | | ESC | 6 | 7 | 8 | 9 | 0 | [ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | ' | , | . | Y | Y |(Null)| |(Null)| F | G | C | R | L | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | - * |--------+------+------+------+------+------| FN1 | | FN2 |------+------+------+------+------+--------| - * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | LCtr | LAlt | | Ralt | RCtr | - * ,------|------|------| |------+------+------. - * | | | Home | | PgUp | | | - * | BkSp | Del |------| |------| Enter| Space| - * | | | End | | PgDn | | | - * `--------------------' `--------------------' - * - * - ***************************************************************************************************** - * This Dvorak keyboard layout stems from my early Kinesis years, using the Contour PS/2 with a Dvorak - * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the cor- - * ner keys. I've decided to continue using this layout with my ErgoDox. - */ - - [_DVORAK] = ( - KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, - KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, LOWER, - KC_LGUI, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, - KC_LCTL, KC_LALT, - KC_HOME, - KC_BSPC, KC_DEL, KC_END, - // right hand - KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, - NO, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, - KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, - RAISE, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, - KC_RALT, KC_RCTL, - KC_PGUP, - KC_PGDN, KC_ENT, KC_SPC -), - -/* Keymap 1: QWERTY - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | | | Home | | PgUp | | | - * | Space|Backsp|------| |------| Tab |Enter | - * | |ace | End | | PgDn | | | - * `--------------------' `----------------------' - */ -[_QWERTY] = ( - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, - KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, LOWER, - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - {ALT_T(KC_APP), KC_LGUI, - KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - RAISE, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_TAB, KC_ENT -), - - -/* Lower 2: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[_LOWER] = ( - // left hand - KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), - -/* Raise 3: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | |Brwser| - * | | |------| |------| |Back | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[_RAISE] = ( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), - -/* Adjust 16: Lower + Raise - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | Reset| | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| |Dvorak|Qwerty| | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -[_ADJUST] = ( - KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, QWERTY, DVORAK, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DVORAK: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_DVORAK); - } - break; - case _QWERTY: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_QWERTY); - } - break; - case _LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - case _RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - - } - return MACRO_NONE; -}; - - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; -- cgit v1.2.3 From 14938367626f0cddba4bc35abe62a9bcc02bee10 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:48:36 -0700 Subject: Delete README.md file clean up. --- keyboards/preonic/keymaps/xyverz/README.md | 49 ------------------------------ 1 file changed, 49 deletions(-) delete mode 100644 keyboards/preonic/keymaps/xyverz/README.md (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/xyverz/README.md b/keyboards/preonic/keymaps/xyverz/README.md deleted file mode 100644 index 9c23c5b9f3..0000000000 --- a/keyboards/preonic/keymaps/xyverz/README.md +++ /dev/null @@ -1,49 +0,0 @@ -# The default Preonic layout - largely based on the Planck's - -## QWERTY Layer: - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | - | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | - * `-----------------------------------------------------------------------------------' - */ - -## LOWER Layer: - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | - * `-----------------------------------------------------------------------------------' - */ - -## RAISE Layer: - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | - * `-----------------------------------------------------------------------------------' - */ \ No newline at end of file -- cgit v1.2.3 From 4e030313f7f55be7573eaab0b91e45290dc2d0b3 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:51:34 -0700 Subject: Delete README.md file cleanup --- keyboards/planck/keymaps/xyverz/README.md | 2 -- 1 file changed, 2 deletions(-) delete mode 100644 keyboards/planck/keymaps/xyverz/README.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md deleted file mode 100644 index b0054fc305..0000000000 --- a/keyboards/planck/keymaps/xyverz/README.md +++ /dev/null @@ -1,2 +0,0 @@ -# Zrevyx's Planck Layout - -- cgit v1.2.3 From c062b6a13d7974144b5ab02896d2213051fd91ad Mon Sep 17 00:00:00 2001 From: Xyverz Date: Mon, 8 Aug 2016 18:52:48 -0700 Subject: Delete keymap.c file cleanup --- keyboards/ergodox/keymaps/xyverz/keymap.c | 184 ------------------------------ 1 file changed, 184 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c deleted file mode 100644 index dd39dbacb2..0000000000 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,184 +0,0 @@ -#include "ergodox.h" -#include "debug.h" -#include "action_layer.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols -#define MDIA 2 // media keys - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Basic layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | \ | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | - * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | App | LGui | | Alt |Ctrl/Esc| - * ,------|------|------| |------+--------+------. - * | | | Home | | PgUp | | | - * | Space|Backsp|------| |------| Tab |Enter | - * | |ace | End | | PgDn | | | - * `--------------------' `----------------------' - */ -// If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* -[BASE] = KEYMAP( // layer 0 : default - // left hand - KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, - KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), - KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, - KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), - LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, - ALT_T(KC_APP), KC_LGUI, - KC_HOME, - KC_SPC,KC_BSPC,KC_END, - // right hand - KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, - TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, - KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, - MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, - KC_UP, KC_DOWN,KC_SLSH,KC_EQL, KC_FN1, - KC_LALT, CTL_T(KC_ESC), - KC_PGUP, - KC_PGDN,KC_TAB, KC_ENT - ), -/* Keymap 1: Symbol Layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// SYMBOLS -[SYMB] = KEYMAP( - // left hand - KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, - KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, - KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, - // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -/* Keymap 2: Media and mouse keys - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | MsUp | | | | | | | | | | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | |Brwser| - * | | |------| |------| |Back | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// MEDIA AND MOUSE -KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_WBAK -), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - // TODO: Make this relevant to the ErgoDox EZ. - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - default: - // none - break; - } - -}; -- cgit v1.2.3 From 39dd3d674cfb7299ce377f70a678d3613f826e0a Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Mon, 8 Aug 2016 19:35:13 -0700 Subject: Changed behavior of _DVORAK layout's KC_RSFT to SFT_T(KC_ENT) for flexibility's sake. Updated the rest of the keymap to reflect the current (as of 19:37 on 08 Aug 2018) default layout and default makefile. --- keyboards/planck/keymaps/xyverz/README.md | 2 - keyboards/planck/keymaps/xyverz/keymap.c | 335 +++++++++++----------------- keyboards/planck/keymaps/xyverz/makefile.mk | 27 ++- 3 files changed, 160 insertions(+), 204 deletions(-) delete mode 100644 keyboards/planck/keymaps/xyverz/README.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/xyverz/README.md b/keyboards/planck/keymaps/xyverz/README.md deleted file mode 100644 index b0054fc305..0000000000 --- a/keyboards/planck/keymaps/xyverz/README.md +++ /dev/null @@ -1,2 +0,0 @@ -# Zrevyx's Planck Layout - diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c index 9ac78ec15d..90529428da 100644 --- a/keyboards/planck/keymaps/xyverz/keymap.c +++ b/keyboards/planck/keymaps/xyverz/keymap.c @@ -19,25 +19,19 @@ extern keymap_config_t keymap_config; #define _DVORAK 2 #define _LOWER 3 #define _RAISE 4 -#define _MUSIC 5 -#define _PLOVER 6 +#define _PLOVER 5 #define _ADJUST 16 -// Macro name shortcuts -#define QWERTY M(_QWERTY) -#define COLEMAK M(_COLEMAK) -#define DVORAK M(_DVORAK) -#define LOWER M(_LOWER) -#define RAISE M(_RAISE) -#define M_BL 5 -#define AUD_OFF M(6) -#define AUD_ON M(7) -#define MUS_OFF M(8) -#define MUS_ON M(9) -#define VC_IN M(10) -#define VC_DE M(11) -#define PLOVER M(12) -#define EXT_PLV M(13) +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; // Fillers to make layering more clear #define _______ KC_TRNS @@ -60,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Colemak @@ -78,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Dvorak @@ -95,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DVORAK] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, @@ -114,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, - {M(M_BL), _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} }, /* Raise @@ -132,17 +126,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, - {M(M_BL), _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} -}, - -/* Music (reserved for process_action_user) - * - */ -[_MUSIC] = { - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} }, /* Plover layer (http://opensteno.org) @@ -151,7 +135,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | | S | T | P | H | * | * | F | P | L | T | D | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | S | K | W | R | * | * | R | B | G | S | Z | + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Exit | | | A | O | | E | U | | | | * `-----------------------------------------------------------------------------------' @@ -170,42 +154,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, - {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } -}; - -const uint16_t PROGMEM fn_actions[] = { - }; #ifdef AUDIO_ENABLE -float tone_startup[][2] = { - {440.0*pow(2.0,(31)/12.0), 12}, - {440.0*pow(2.0,(28)/12.0), 8}, - {440.0*pow(2.0,(19)/12.0), 8}, - {440.0*pow(2.0,(24)/12.0), 8}, - {440.0*pow(2.0,(28)/12.0), 20} -}; +float tone_startup[][2] = SONG(STARTUP_SOUND); float tone_qwerty[][2] = SONG(QWERTY_SOUND); float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_colemak[][2] = SONG(COLEMAK_SOUND); float tone_plover[][2] = SONG(PLOVER_SOUND); float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); #endif @@ -214,166 +188,127 @@ void persistant_default_layer_set(uint16_t default_layer) { default_layer_set(default_layer); } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - break; - case _COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistant_default_layer_set(1UL<<_COLEMAK); - } - break; - case _DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - persistant_default_layer_set(1UL<<_DVORAK); - } - break; - case _LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - case _RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - break; - case M_BL: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - case 6: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - audio_off(); - #endif - } - break; - case 7: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - audio_on(); - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif - } - break; - case 8: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - layer_off(_MUSIC); - stop_all_notes(); - #endif - } - break; - case 9: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(music_scale, false, 0); - layer_on(_MUSIC); - #endif - } - break; - case 10: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - voice_iterate(); - PLAY_NOTE_ARRAY(music_scale, false, 0); - #endif - } - break; - case 11: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - voice_deiterate(); - PLAY_NOTE_ARRAY(music_scale, false, 0); - #endif - } - break; - case 12: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_plover, false, 0); - #endif - layer_off(_RAISE); - layer_off(_LOWER); - layer_off(_ADJUST); - layer_off(_MUSIC); - stop_all_notes(); - layer_on(_PLOVER); - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - keymap_config.raw = eeconfig_read_keymap(); - keymap_config.nkro = 1; - eeconfig_update_keymap(keymap_config.raw); - } - break; - case 13: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); - #endif - layer_off(_PLOVER); - } - break; - +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); } - return MACRO_NONE; -}; + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - _delay_ms(20); // stops the tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif } #ifdef AUDIO_ENABLE -void play_goodbye_tone() + +void startup_user() { - PLAY_NOTE_ARRAY(goodbye, false, 0); - _delay_ms(150); + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); } -uint8_t starting_note = 0x0C; -int offset = 7; - -void process_action_user(keyrecord_t *record) { +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} - if (IS_LAYER_ON(_MUSIC)) { - if (record->event.pressed) { - play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); - } else { - stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); - } - } +void music_on_user(void) +{ + music_scale_user(); +} +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); } -#endif + +#endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk index 99fbfbd0bb..0f4953888d 100644 --- a/keyboards/planck/keymaps/xyverz/makefile.mk +++ b/keyboards/planck/keymaps/xyverz/makefile.mk @@ -1,2 +1,25 @@ -AUDIO_ENABLE = yes -NKRO_ENABLE = yes \ No newline at end of file + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif -- cgit v1.2.3 From ca3278cc356038ecdaf96fe12025b43c18692976 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Tue, 9 Aug 2016 09:31:56 -0700 Subject: adds Xyverz's keymaps (#615) * Adding my own keymaps to the following keyboards: Planck, Preonic, Atreus, Ergodox * Delete dvorak.png Not reflective of my layout. * Delete readme.md file cleanup, removing file that doesn't apply to my layout. * Delete old_keymap.c file cleanup * Delete README.md file clean up. * Delete README.md file cleanup * Delete keymap.c file cleanup * Changed behavior of _DVORAK layout's KC_RSFT to SFT_T(KC_ENT) for flexibility's sake. Updated the rest of the keymap to reflect the current (as of 19:37 on 08 Aug 2018) default layout and default makefile. --- keyboards/atreus/keymaps/xyverz/keymap.c | 89 +++++++ keyboards/planck/keymaps/xyverz/keymap.c | 314 ++++++++++++++++++++++++ keyboards/planck/keymaps/xyverz/makefile.mk | 25 ++ keyboards/preonic/keymaps/xyverz/keymap.c | 342 +++++++++++++++++++++++++++ keyboards/preonic/keymaps/xyverz/makefile.mk | 1 + 5 files changed, 771 insertions(+) create mode 100644 keyboards/atreus/keymaps/xyverz/keymap.c create mode 100644 keyboards/planck/keymaps/xyverz/keymap.c create mode 100644 keyboards/planck/keymaps/xyverz/makefile.mk create mode 100644 keyboards/preonic/keymaps/xyverz/keymap.c create mode 100644 keyboards/preonic/keymaps/xyverz/makefile.mk (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..447fbcf10f --- /dev/null +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -0,0 +1,89 @@ +// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by +// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and +// Preonic keyboards by Jack Humbert. + +#include "atreus.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* Dvorak */ + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, + {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL), KC_B, KC_M, KC_W, KC_V, SFT_T(KC_Z) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL} + }, + [_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_CM] = { /* Colemak */ + {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + }, + [_L1] = { /* LAYER 1 */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, + {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, + {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } + }, + [_L2] = { /* LAYER 2 */ + {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, + {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 }, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..90529428da --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/planck/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..0f4953888d --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/makefile.mk @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..adc7392e5c --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/keymap.c @@ -0,0 +1,342 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MUSIC 5 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 +#define AUD_OFF M(6) +#define AUD_ON M(7) +#define MUS_OFF M(8) +#define MUS_ON M(9) +#define VC_IN M(10) +#define VC_DE M(11) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | - | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_MINS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, + {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} +}, + +/* Music (reserved for process_action_user) + * + */ +[_MUSIC] = { + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float start_up[][2] = { + {440.0*pow(2.0,(14)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8}, + {440.0*pow(2.0,(18)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 6: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_off(); + #endif + } + break; + case 7: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + audio_on(); + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif + } + break; + case 8: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + layer_off(_MUSIC); + stop_all_notes(); + #endif + } + break; + case 9: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(music_scale, false, 0); + layer_on(_MUSIC); + #endif + } + break; + case 10: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + case 11: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, 0); + #endif + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE + +uint8_t starting_note = 0x0C; +int offset = 7; + +void process_action_user(keyrecord_t *record) { + + if (IS_LAYER_ON(_MUSIC)) { + if (record->event.pressed) { + play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); + } else { + stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); + } + } + +} + +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +#endif \ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk new file mode 100644 index 0000000000..628167ff66 --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/makefile.mk @@ -0,0 +1 @@ +AUDIO_ENABLE = yes \ No newline at end of file -- cgit v1.2.3 From 2a160bbbe3ad496dd688f4399ab2b8d127c0b8a7 Mon Sep 17 00:00:00 2001 From: Callum Oakley Date: Tue, 9 Aug 2016 17:33:07 +0100 Subject: Update keymap. (#616) * changed order of bottom row of symbol layer to ease acess to brackets * updated readme.md to reflect keymap changes --- keyboards/planck/keymaps/callum/keymap.c | 4 ++-- keyboards/planck/keymaps/callum/readme.md | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c index a747dcb159..ed187df1da 100644 --- a/keyboards/planck/keymaps/callum/keymap.c +++ b/keyboards/planck/keymaps/callum/keymap.c @@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-----------------------------------------------------------------------------------. * | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | ~ | | | + | [ | { | } | ] | = | \ | ` | | + * | | ~ | ` | + | = | | | \ | [ | ] | { | } | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' @@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_SYMB] = { {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_ESC }, {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, - {_______, KC_TILD, KC_PIPE, KC_PLUS, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_EQL, KC_BSLS, KC_GRV, _______}, + {_______, KC_TILD, KC_GRV, KC_PLUS, KC_EQL, KC_PIPE, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md index d4f3449f15..030def7f77 100644 --- a/keyboards/planck/keymaps/callum/readme.md +++ b/keyboards/planck/keymaps/callum/readme.md @@ -31,9 +31,9 @@ On *macOS* I recommend using [Karabiner](https://pqrs.org/osx/karabiner/) and ti None of the modifiers are overwritten so that `shift-alt-arrows` etc work as expected. ## The `SYMB` layer -![](http://i.imgur.com/iuU144Y.png) +![](http://i.imgur.com/thh1ne2.png) -The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, with brackets in the centre; then normally shifted symbols to the left, and non shifted to the right, in order of most to least used. +The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, arranged roughly so that the most used symbols are accessible with the strongest fingers. `esc` and `del` are repeated here since I wanted to be able to reach either, one handed, with either hand. -- cgit v1.2.3 From 6f700f1eb0c76aa19187efd83ab2b49a0db7f71f Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Tue, 9 Aug 2016 23:49:27 -0700 Subject: Adding my own layouts for the Phantom and Ergodox. My Ergodox layout adds persistent layers based on the Planck and Preonic setup. The layout arrays are pulled directly from the ergodox/ez/ez.h keymap definition starting at line 81. --- keyboards/ergodox/keymaps/xyverz/keymap.c | 311 ++++++++++++++++++++++++++++++ keyboards/phantom/keymaps/xyverz/keymap.c | 67 +++++++ 2 files changed, 378 insertions(+) create mode 100644 keyboards/ergodox/keymaps/xyverz/keymap.c create mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..c5ce99dd22 --- /dev/null +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -0,0 +1,311 @@ +/* + * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak + * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner + * keys. I've decided to continue using this layout with my ErgoDox. + * + * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional + * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. + * + * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck + * layouts. + * + * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the + * keymap is defined, beginning on line 81. + * + */ + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 // Dvorak layer +#define _QW 1 // Qwerty layer +#define _CM 2 // Colemak layer +#define _MD 3 // Media Layer +#define _KP 4 // Keypad Layer + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Dvorak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | Y | Y | | | | F | G | C | R | L | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_DV] = { // layer 0 : Dvorak + // left hand + {KC_RBRC, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_QUOT, KC_A, KC_SCLN, KC_GRV, KC_END }, + {KC_2, KC_COMM, KC_O, KC_Q, KC_INS, KC_DEL }, + {KC_3, KC_DOT, KC_E, KC_J, KC_LEFT, KC_BSPC}, + {KC_4, KC_P, KC_U, KC_K, KC_RGHT, KC_HOME}, + {KC_5, KC_Y, KC_I, KC_X, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_F, KC_D, KC_B, KC_NO, KC_RCTL}, + {KC_7, KC_G, KC_H, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_C, KC_T, KC_W, KC_DOWN, KC_SPC }, + {KC_9, KC_R, KC_N, KC_V, KC_SLSH, KC_ENT }, + {KC_0, KC_L, KC_S, KC_Z, KC_EQL, KC_PGDN}, + {KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO } +}, + +/* Keymap 1: QWERTY layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | | | | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_QW] = { // layer 1 : QWERTY + // left hand + {KC_EQL, KC_TAB, KC_CAPS, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, + {KC_2, KC_W, KC_S, KC_X, KC_INS, KC_DEL }, + {KC_3, KC_E, KC_D, KC_C, KC_LEFT, KC_BSPC}, + {KC_4, KC_R, KC_F, KC_V, KC_RGHT, KC_HOME}, + {KC_5, KC_T, KC_G, KC_B, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_Y, KC_H, KC_N, KC_NO, KC_RCTL}, + {KC_7, KC_U, KC_J, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_I, KC_K, KC_COMM, KC_DOWN, KC_SPC }, + {KC_9, KC_O, KC_L, KC_DOT, KC_LBRC, KC_ENT }, + {KC_0, KC_P, KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN}, + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + }, + +/* Keymap 2: Colemak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSpc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtr | LAlt | | Ralt | RCtr | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * | BkSp | Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[_CM] = { // layer 2 : Colemak + // left hand + {KC_EQL, KC_TAB, KC_BSPC, KC_LSFT, KC_LGUI, KC_NO }, + {KC_1, KC_Q, KC_A, KC_Z, KC_GRV, KC_END }, + {KC_2, KC_W, KC_R, KC_X, KC_INS, KC_DEL }, + {KC_3, KC_F, KC_S, KC_C, KC_LEFT, KC_BSPC}, + {KC_4, KC_P, KC_T, KC_V, KC_RGHT, KC_HOME}, + {KC_5, KC_G, KC_D, KC_B, KC_NO, KC_LCTL}, + {KC_ESC, KC_NO, KC_NO, MO(_MD), KC_NO, KC_LALT}, + + // right hand + {KC_ESC, KC_NO, KC_NO, MO(_KP), KC_NO, KC_RALT}, + {KC_6, KC_J, KC_H, KC_K, KC_NO, KC_RCTL}, + {KC_7, KC_L, KC_N, KC_M, KC_UP, KC_PGUP}, + {KC_8, KC_U, KC_E, KC_COMM, KC_DOWN, KC_SPC }, + {KC_9, KC_Y, KC_I, KC_DOT, KC_LBRC, KC_ENT }, + {KC_0, KC_SCLN, KC_O, KC_SLSH, KC_RBRC, KC_PGDN}, + {KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO } + }, + +/* Keymap 3: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | TEENSY | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | PrSc | ScLk | Paus | | FN4 | | FN5 | | Mute | Vol- | Vol+ | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| Stop | Prev | Play | Next | Sel | | + * |--------+------+------+------+------+------| FN4 | | FN5 |------+------+------+------+------+--------| + * | | |Dvorak|Qwerty|Colemk| | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Media Layer +[_MD] = { // layer 3 : Media layer + // left hand + {RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO }, + {KC_F1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F2, KC_PSCR, KC_TRNS, DVORAK, KC_TRNS, KC_TRNS}, + {KC_F3, KC_SLCK, KC_TRNS, QWERTY, KC_TRNS, KC_TRNS}, + {KC_F4, KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS}, + {KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F11, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + + // right hand + {KC_F12, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F6, KC_TRNS, KC_MSTP, KC_TRNS, KC_NO, KC_TRNS}, + {KC_F7, KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F8, KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F9, KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_F10, KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO } + }, + +/* Keymap 4: Keypad layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Power | | | | | | | | | | NmLk | KP / | KP * | KP - | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Sleep | | | | | | FN5 | | FN4 | | KP 7 | KP 8 | KP 9 | KP + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Wake | | | | | |------| |------| | KP 4 | KP 5 | KP 6 | KP + | | + * |--------+------+------+------+------+------| FN5 | | FN4 |------+------+------+------+------+--------| + * | | | | | | | | | | | KP 1 | KP 2 | KP 3 |KP Ent| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | KP 0 | | KP . |KP Ent| | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Keypad Layer +[_KP] = { // layer 4 : Keypad layer + // left hand + {KC_PWR, KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + + // right hand + {KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS}, + {KC_NLCK, KC_P7, KC_P4, KC_P1, KC_P0, KC_TRNS}, + {KC_PSLS, KC_P8, KC_P5, KC_P2, KC_NO, KC_TRNS}, + {KC_PAST, KC_P9, KC_P6, KC_P3, KC_PDOT, KC_TRNS}, + {KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO } + }, + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..5948e4ca54 --- /dev/null +++ b/keyboards/phantom/keymaps/xyverz/keymap.c @@ -0,0 +1,67 @@ +#include "phantom.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| + * |-----------------------------------------------------------| |--------------| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| + * |-----------------------------------------------------------| |--------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn| + * |-----------------------------------------------------------| `--------------' + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| ,----. + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |-----------------------------------------------------------| ,-------------. + * |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig | + * `-----------------------------------------------------------' `-------------' + */ +[_BL] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------------------------. + * |RESET| | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| `--------------' + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------| ,----. + * | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | | + * |-----------------------------------------------------------| ,-------------. + * | | | | | | | | | | | | | + * `-----------------------------------------------------------' `-------------' + */ +[_FL] = KEYMAP( + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_SLEP, \ + RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,KC_MSEL, KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_CAPS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS) +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { +} -- cgit v1.2.3 From 0d6035524173219ced32abbfa2e78171edab17ff Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Tue, 9 Aug 2016 23:56:21 -0700 Subject: Added braces using LSFT(KC_LBRC) and LSFT(KC_RBRC) since the normal RBCR and LBCR didn't work for me. --- keyboards/atreus/keymaps/xyverz/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index 447fbcf10f..f4d4a9cf0f 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 }, - {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } + {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET } } }; -- cgit v1.2.3 From 56f86413e0d7606030cad68257a5d6287c9fd35f Mon Sep 17 00:00:00 2001 From: Elliot DeNolf Date: Thu, 11 Aug 2016 09:54:02 -0600 Subject: Add denolfe satan keymap --- keyboards/satan/keymaps/denolfe/Makefile | 20 +++ keyboards/satan/keymaps/denolfe/README.md | 12 ++ .../satan/keymaps/denolfe/keyboard-layout.png | Bin 0 -> 31762 bytes keyboards/satan/keymaps/denolfe/keymap.c | 171 +++++++++++++++++++++ 4 files changed, 203 insertions(+) create mode 100644 keyboards/satan/keymaps/denolfe/Makefile create mode 100644 keyboards/satan/keymaps/denolfe/README.md create mode 100644 keyboards/satan/keymaps/denolfe/keyboard-layout.png create mode 100644 keyboards/satan/keymaps/denolfe/keymap.c (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/denolfe/Makefile b/keyboards/satan/keymaps/denolfe/Makefile new file mode 100644 index 0000000000..c4adab737c --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/Makefile @@ -0,0 +1,20 @@ + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/denolfe/README.md b/keyboards/satan/keymaps/denolfe/README.md new file mode 100644 index 0000000000..30b94fcdd2 --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/README.md @@ -0,0 +1,12 @@ +# denolfe's Layout +Customized Satan keymap + +![Layout](keyboard-layout.png "Practical Keymap") + +## Programming Instructions: +`cd` into keymap directory, `make dfu` + +## Features +- Movement keys with CapsLock + h, j, k, l +- Media Keys +- Backlight control diff --git a/keyboards/satan/keymaps/denolfe/keyboard-layout.png b/keyboards/satan/keymaps/denolfe/keyboard-layout.png new file mode 100644 index 0000000000..d6d6ad57fb Binary files /dev/null and b/keyboards/satan/keymaps/denolfe/keyboard-layout.png differ diff --git a/keyboards/satan/keymaps/denolfe/keymap.c b/keyboards/satan/keymaps/denolfe/keymap.c new file mode 100644 index 0000000000..2f6c8d8f4f --- /dev/null +++ b/keyboards/satan/keymaps/denolfe/keymap.c @@ -0,0 +1,171 @@ +#include "satan.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _SL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_END, KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_HOME, LCTL(KC_LEFT), LCTL(KC_END), LCTL(KC_RIGHT), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, F(9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif + +[_SL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, LSFT(KC_END), KC_MPRV, KC_MNXT, KC_MPLY, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_LEFT), LSFT(KC_DOWN), LSFT(KC_UP), LSFT(KC_RIGHT), KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, LSFT(KC_HOME), LCTL(LSFT(KC_LEFT)), LCTL(LSFT(KC_END)), LCTL(LSFT(KC_RIGHT)), KC_TRNS, RESET, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +enum function_id { + SHIFT_ESC, + #ifdef RGBLIGHT_ENABLE + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL + #endif +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), + #ifdef RGBLIGHT_ENABLE + [1] = ACTION_FUNCTION(RGBLED_TOGGLE), + [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + #endif + [9] = ACTION_LAYER_MODS(2, MOD_LSFT) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + //led operations + #ifdef RGBLIGHT_ENABLE + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + #endif + } +} -- cgit v1.2.3 From d1f418d85ddb3bc9594ab71267af92ef1a5b7b0c Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 11 Aug 2016 09:46:05 -0700 Subject: Update Makefile Corrected spelling of "ATREUS" in all locations. (ATRUES -> ATREUS) --- keyboards/atreus/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile index 95ee1d4d7b..5894d231f9 100644 --- a/keyboards/atreus/Makefile +++ b/keyboards/atreus/Makefile @@ -2,11 +2,11 @@ ifdef TEENSY2 OPT_DEFS += -DATREUS_TEENSY2 - ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else OPT_DEFS += -DATREUS_ASTAR OPT_DEFS += -DCATERINA_BOOTLOADER - ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif @@ -84,5 +84,5 @@ endif USB ?= /dev/cu.usbmodem1411 upload: build - $(ATRUES_UPLOAD_COMMAND) - \ No newline at end of file + $(ATREUS_UPLOAD_COMMAND) + -- cgit v1.2.3 From eeade4af84af073479f38de32d97e99203b29350 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 11 Aug 2016 09:48:23 -0700 Subject: Update keymap.c Changed right-hand F-key layout in order to add KC_PLUS to _L2. --- keyboards/atreus/keymaps/xyverz/keymap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index f4d4a9cf0f..0238fdbd39 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -51,8 +51,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }, [_L2] = { /* LAYER 2 */ {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, - {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 }, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, + {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET } } }; -- cgit v1.2.3 From 71e1bb2e1cf5fd87cb9cc6f81b830763b38665d4 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Thu, 11 Aug 2016 11:04:57 -0700 Subject: Delete keymap.c Not ready to submit this one just yet. --- keyboards/phantom/keymaps/xyverz/keymap.c | 67 ------------------------------- 1 file changed, 67 deletions(-) delete mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c (limited to 'keyboards') diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c deleted file mode 100644 index 5948e4ca54..0000000000 --- a/keyboards/phantom/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,67 +0,0 @@ -#include "phantom.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,-----------------------------------------------------------------------------. - * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| - * |-----------------------------------------------------------| |--------------| - * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| - * |-----------------------------------------------------------| |--------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn| - * |-----------------------------------------------------------| `--------------' - * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,----. - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | - * |-----------------------------------------------------------| ,-------------. - * |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig | - * `-----------------------------------------------------------' `-------------' - */ -[_BL] = KEYMAP( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \ - KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - * ,-----------------------------------------------------------------------------. - * |RESET| | | | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| |--------------| - * | | | | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| |--------------| - * | | | | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| `--------------' - * | | | | | | | | | | | | | | - * |-----------------------------------------------------------| ,----. - * | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | | - * |-----------------------------------------------------------| ,-------------. - * | | | | | | | | | | | | | - * `-----------------------------------------------------------' `-------------' - */ -[_FL] = KEYMAP( - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_SLEP, \ - RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,KC_MSEL, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_CAPS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS) -}; - -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { -} -- cgit v1.2.3 From 1c8d64d3b3664ef7d62ea12f8fd510231a7ec54e Mon Sep 17 00:00:00 2001 From: shela Date: Fri, 12 Aug 2016 21:24:43 +0900 Subject: add my keymap --- keyboards/hhkb/keymaps/shela/Makefile | 1 + keyboards/hhkb/keymaps/shela/action_pseudo_lut.c | 142 ++++++++++++++++++ keyboards/hhkb/keymaps/shela/action_pseudo_lut.h | 15 ++ keyboards/hhkb/keymaps/shela/config.h | 12 ++ keyboards/hhkb/keymaps/shela/keymap.c | 179 +++++++++++++++++++++++ keyboards/hhkb/keymaps/shela/keymap_jis2us.h | 32 ++++ keyboards/hhkb/keymaps/shela/readme.md | 14 ++ 7 files changed, 395 insertions(+) create mode 100644 keyboards/hhkb/keymaps/shela/Makefile create mode 100644 keyboards/hhkb/keymaps/shela/action_pseudo_lut.c create mode 100644 keyboards/hhkb/keymaps/shela/action_pseudo_lut.h create mode 100644 keyboards/hhkb/keymaps/shela/config.h create mode 100644 keyboards/hhkb/keymaps/shela/keymap.c create mode 100644 keyboards/hhkb/keymaps/shela/keymap_jis2us.h create mode 100644 keyboards/hhkb/keymaps/shela/readme.md (limited to 'keyboards') diff --git a/keyboards/hhkb/keymaps/shela/Makefile b/keyboards/hhkb/keymaps/shela/Makefile new file mode 100644 index 0000000000..d0586bda68 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/Makefile @@ -0,0 +1 @@ +SRC += action_pseudo_lut.c diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c new file mode 100644 index 0000000000..b205968c7b --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c @@ -0,0 +1,142 @@ +#include "quantum.h" +#include "action_pseudo_lut.h" + +static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; + +/* + * Pseudo layout action. + * This action converts a keycode in order to output the character according to the keymap you specified + * still your keyboard layout recognized wrongly on your OS. + * Memo: Using other layer keymap to get keycode + */ +void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) { + static uint8_t prev_shift; + uint16_t keycode; + uint16_t pseudo_keycode; + + /* get keycode from keymap you specified */ + keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); + + prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); + + if (record->event.pressed) { + /* when magic commands entered, keycode does not converted */ + if (IS_COMMAND()) { + if (prev_shift) { + add_shift_bit(keycode); + } + register_code(keycode); + return; + } + + if (prev_shift) { + pseudo_keycode = convert_keycode(keymap, keycode, true); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + add_shift_bit(keycode); + + if (IS_LSFT(pseudo_keycode)) { + register_code(QK_LSFT ^ pseudo_keycode); + } else { + /* delete shift mod temporarily */ + del_mods(prev_shift); + send_keyboard_report(); + register_code(pseudo_keycode); + add_mods(prev_shift); + send_keyboard_report(); + } + } else { + pseudo_keycode = convert_keycode(keymap, keycode, false); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + + if (IS_LSFT(pseudo_keycode)) { + add_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + register_code(QK_LSFT ^ pseudo_keycode); + /* on Windows, prevent key repeat to avoid unintended output */ + unregister_code(QK_LSFT ^ pseudo_keycode); + del_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + } else { + register_code(pseudo_keycode); + } + } + } else { + if (get_shift_bit(keycode)) { + del_shift_bit(keycode); + pseudo_keycode = convert_keycode(keymap, keycode, true); + } else { + pseudo_keycode = convert_keycode(keymap, keycode, false); + } + dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); + + if (IS_LSFT(pseudo_keycode)) { + unregister_code(QK_LSFT ^ pseudo_keycode); + } else { + unregister_code(pseudo_keycode); + } + } +} + +uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded) +{ + uint16_t pseudo_keycode; + + switch (keycode) { + case KC_A ... KC_CAPSLOCK: +#if defined(__AVR__) + if (shift_modded) { + pseudo_keycode = pgm_read_word(&keymap[keycode][1]); + } else { + pseudo_keycode = pgm_read_word(&keymap[keycode][0]); + } +#else + if (shift_modded) { + pseudo_keycode = keymap[keycode][1]; + } else { + pseudo_keycode = keymap[keycode][0]; + } +#endif + /* if undefined, use got keycode as it is */ + if (pseudo_keycode == 0x00) { + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + } + break; + default: + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + break; + } + return pseudo_keycode; +} + +uint8_t get_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); + } else { + dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); + return 0; + } +} + +void add_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); + } else { + dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); + } +} + +void del_shift_bit(uint16_t keycode) { + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); + } else { + dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); + } +} diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h new file mode 100644 index 0000000000..681252440f --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h @@ -0,0 +1,15 @@ +#ifndef ACTION_PSEUDO_LUT_H +#define ACTION_PSEUDO_LUT_H + +#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key + +#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT) + +void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]); +uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool); + +uint8_t get_shift_bit(uint16_t); +void add_shift_bit(uint16_t); +void del_shift_bit(uint16_t); + +#endif diff --git a/keyboards/hhkb/keymaps/shela/config.h b/keyboards/hhkb/keymaps/shela/config.h new file mode 100644 index 0000000000..08cc1fb46e --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_SHELA_H +#define CONFIG_SHELA_H + +#include "../../config.h" + +#undef TAPPING_TERM +#define TAPPING_TERM 230 + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 2000 + +#endif diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/keymaps/shela/keymap.c new file mode 100644 index 0000000000..c286b99de8 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/keymap.c @@ -0,0 +1,179 @@ +/* + * HHKB Pro 2 US Layout for shela + */ +#include "hhkb.h" +#include "keymap_jis2us.h" +#include "action_pseudo_lut.h" + +enum keymap_layout { + BASE = 0, + PSEUDO_US, + DVORAK, + MOUSE, + TENKEY, + HHKB, + SPACE_FN, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ` | BSp | + * |-----------------------------------------------------------------------------------------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------| + * | Control | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------| + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | + * `-----------------------------------------------------------------------------------------' + * |LAlt | LGui | SpaceFN | RGui |RAlt | + * `-----------------------------------------------------------------' + */ + [BASE] = + KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \ + KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \ + OSM(MOD_LSFT),KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_FN0, \ + KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT), + + /* Layer 1: Pseudo US Layout Layer */ + [PSEUDO_US] = + KEYMAP(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, \ + KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, \ + KC_LCTL,KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, \ + OSM(MOD_LSFT),KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT,KC_FN0, \ + KC_LGUI,KC_FN3, KC_FN2, KC_FN4 ,KC_RGUI), + + /* Layer 2: Dvorak Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | ` | BSp | + * |-----------------------------------------------------------------------------------------| + * | Tab | ' | , | . | P | Y | F | G | C | R | L | / | = | \ | + * |-----------------------------------------------------------------------------------------| + * | Control | A | O | E | U | I | D | H | T | N | S | - | Enter | + * |-----------------------------------------------------------------------------------------| + * | Shift | ; | Q | J | K | X | B | M | W | V | Z | Shift | Fn0 | + * `-----------------------------------------------------------------------------------------' + * |LAlt | LGui | SpaceFN | RGui |RAlt | + * `-----------------------------------------------------------------' + */ + [DVORAK] = + KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC,KC_RBRC,KC_GRV, KC_BSPC, \ + KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,KC_EQL, KC_BSLS, \ + KC_LCTL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,KC_ENT, \ + KC_LSFT,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,KC_FN0, \ + KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT), + + /* Layer 3: Mouse layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | MwL | MwD | MwU | MwR | | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | McL | McD | McU | McR | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | Mb1 | Mb2 | Mb3 | | | | Fn0 | + * `-----------------------------------------------------------------------------------------' + * | | | Mb1 | | | + * `-----------------------------------------------------------------' + */ + [MOUSE] = + KEYMAP(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1,KC_BTN2,KC_BTN3,KC_NO, KC_NO, KC_TRNS,KC_FN0, \ + KC_TRNS,KC_TRNS, KC_BTN1, KC_TRNS,KC_TRNS), + + /* Layer 4: Tenkey layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | | | | | | | | | | / | * | - | | BSp | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | | 7 | 8 | 9 | + | | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | | 4 | 5 | 6 | Enter | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | | | 1 | 2 | 3 | + | Fn0 | + * `-----------------------------------------------------------------------------------------' + * | | | SpaceFN | 0 | . | + * `-----------------------------------------------------------------' + */ + [TENKEY] = + KEYMAP(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSLS,KC_PAST,KC_PMNS,KC_NO, KC_BSPC, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_7,KC_KP_8,KC_KP_9,KC_PPLS,KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_4,KC_KP_5,KC_KP_6,KC_PENT, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1,KC_KP_2,KC_KP_3,KC_PPLS,KC_FN0, \ + KC_TRNS,KC_TRNS, KC_FN2, KC_KP_0,KC_PDOT), + + /* Layer 5: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------------------------------------. + * | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------| + * | Caps | Fn5 | Fn6 | Fn7 | Fn8 | Fn9 | | | Psc | Slk | Pus | Up | | BSp | + * |-----------------------------------------------------------------------------------------| + * | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | + * |-----------------------------------------------------------------------------------------| + * | | | | | | | + | - | End | PgD | Dow | | | + * `-----------------------------------------------------------------------------------------' + * | | | | | | + * `-----------------------------------------------------------------' + */ + [HHKB] = + KEYMAP(KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS,KC_FN5, KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_UP, KC_TRNS,KC_BSPC, \ + KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), + + /* Layer 6: SpaceFN + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | Del | + * |-----------------------------------------------------------------------------------------| + * | | End | Up | Hom | | | | Hom | Up | End | Psc | Slk | Pau | Ins | + * |-----------------------------------------------------------------------------------------| + * | | Lef | Dow | Rig | PgU | | PgU | Lef | Dow | Rig | | | | + * |-----------------------------------------------------------------------------------------| + * | | | | PgD | | Spc | PgD | ` | ~ | | | | | + * `-----------------------------------------------------------------------------------------' + * | | | | | | + * `-----------------------------------------------------------------' + */ + [SPACE_FN] = + KEYMAP(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, \ + KC_TRNS,KC_END, KC_UP, KC_HOME,KC_NO, KC_NO, KC_NO, KC_HOME,KC_UP, KC_END, KC_PSCR,KC_SLCK,KC_PAUS,KC_INS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_PGUP,KC_NO, KC_PGUP,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS,KC_NO, KC_NO, KC_PGDN,KC_NO, KC_SPC, KC_PGDN,KC_GRV, KC_TILD,KC_NO, KC_NO, KC_TRNS,KC_NO, \ + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), +}; + +/* + * user defined action function + */ +enum function_id { + PSEUDO_US_FUNCTION, +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + + switch (id) { + case PSEUDO_US_FUNCTION: + action_pseudo_lut(record, BASE, keymap_jis2us); + break; + } +} + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(HHKB), + [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION), + [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE), + [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN), + [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_KANA), + [5] = ACTION_DEFAULT_LAYER_SET(BASE), + [6] = ACTION_DEFAULT_LAYER_SET(PSEUDO_US), + [7] = ACTION_DEFAULT_LAYER_SET(MOUSE), + [8] = ACTION_DEFAULT_LAYER_SET(TENKEY), + [9] = ACTION_DEFAULT_LAYER_SET(DVORAK), +}; diff --git a/keyboards/hhkb/keymaps/shela/keymap_jis2us.h b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h new file mode 100644 index 0000000000..cf2bd4f0e8 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h @@ -0,0 +1,32 @@ +#ifndef KEYMAP_JIS2US_H +#define KEYMAP_JIS2US_H + +/* keymap for convert from JIS to US */ +const uint16_t PROGMEM keymap_jis2us[][2] = { + [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ + + [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ + [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ + [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ + [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ + [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ + [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ + [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ + [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ + [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ + [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ + [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ + [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ + [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ + [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ + [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ + [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ + [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ + [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ + [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ + [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ + [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ + [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ +}; + +#endif diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md new file mode 100644 index 0000000000..cf5f291697 --- /dev/null +++ b/keyboards/hhkb/keymaps/shela/readme.md @@ -0,0 +1,14 @@ +# Shela's HHKB Layout + +Layer 0: US Layout +Layer 1: Pseudo US Layout +Layer 2: Dvorak Layout +Layer 3: Mouse +Layer 4: Tenkey +Layer 5: HHKB Fn Key +Layer 6: SpaceFN + +## Pseudo US Layout + +On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings. +But, you can use HHKB like a US layout keyboard as it is. -- cgit v1.2.3 From c9272fee083d274c11bab0d8ec5520b54961f7fa Mon Sep 17 00:00:00 2001 From: shela Date: Fri, 12 Aug 2016 21:33:32 +0900 Subject: add new line --- keyboards/hhkb/keymaps/shela/readme.md | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'keyboards') diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md index cf5f291697..2317e880f2 100644 --- a/keyboards/hhkb/keymaps/shela/readme.md +++ b/keyboards/hhkb/keymaps/shela/readme.md @@ -1,12 +1,12 @@ # Shela's HHKB Layout -Layer 0: US Layout -Layer 1: Pseudo US Layout -Layer 2: Dvorak Layout -Layer 3: Mouse -Layer 4: Tenkey -Layer 5: HHKB Fn Key -Layer 6: SpaceFN +Layer 0: US Layout +Layer 1: Pseudo US Layout +Layer 2: Dvorak Layout +Layer 3: Mouse +Layer 4: Tenkey +Layer 5: HHKB Fn Key +Layer 6: SpaceFN ## Pseudo US Layout -- cgit v1.2.3 From 11e23fd3fdbe86ff85b2be7783c46d4360b07360 Mon Sep 17 00:00:00 2001 From: shela Date: Fri, 12 Aug 2016 21:45:36 +0900 Subject: add new line --- keyboards/hhkb/keymaps/shela/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md index 2317e880f2..5a06a83632 100644 --- a/keyboards/hhkb/keymaps/shela/readme.md +++ b/keyboards/hhkb/keymaps/shela/readme.md @@ -10,5 +10,5 @@ Layer 6: SpaceFN ## Pseudo US Layout -On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings. +On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings. But, you can use HHKB like a US layout keyboard as it is. -- cgit v1.2.3 From b98d47abe544c68ffba745b6643a777f8f61a03c Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Fri, 12 Aug 2016 16:36:07 +0200 Subject: ergodox: Update my keymap to v1.5 Major changes include: * The **1HAND** layer has been removed. * A `Delete` key is now available on the right thumb cluster. * The **ADORE** layer received a major update, see the updated layout image. * It is now possible to enable automatic logging for the **ADORE** layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. * The `~` key and the `Media Next/Prev` key have been swapped on the **base** layer. * On the **ARROW** layer, `Backspace` has been replaced by `Enter`. * There is some experimental support for entering Unicode symbols. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/Makefile | 7 + .../keymaps/algernon/images/adore-layer.png | Bin 95615 -> 93748 bytes .../ergodox/keymaps/algernon/images/base-layer.png | Bin 95654 -> 95222 bytes .../keymaps/algernon/images/one-handed-layer.png | Bin 91140 -> 0 bytes keyboards/ergodox/keymaps/algernon/keymap.c | 2422 ++++++++++---------- keyboards/ergodox/keymaps/algernon/readme.md | 52 +- 6 files changed, 1244 insertions(+), 1237 deletions(-) delete mode 100644 keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile index 6bf3976b9d..00194857ac 100644 --- a/keyboards/ergodox/keymaps/algernon/Makefile +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -8,10 +8,17 @@ CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes KEYLOGGER_ENABLE ?= yes +ADORE_AUTOLOG ?= no + ifeq (${FORCE_NKRO},yes) OPT_DEFS += -DFORCE_NKRO endif +ifeq (${ADORE_AUTOLOG},yes) +KEYLOGGER_ENABLE = yes +OPT_DEFS += -DADORE_AUTOLOG +endif + ifeq (${KEYLOGGER_ENABLE},yes) OPT_DEFS += -DKEYLOGGER_ENABLE CONSOLE_ENABLE = yes diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png index 3df68ea53d..44ad8a1eb7 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png and b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png index 7b25a05b3a..da159fbe2e 100644 Binary files a/keyboards/ergodox/keymaps/algernon/images/base-layer.png and b/keyboards/ergodox/keymaps/algernon/images/base-layer.png differ diff --git a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png deleted file mode 100644 index 698d11e5f2..0000000000 Binary files a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png and /dev/null differ diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index c4de53da27..244bfb51fe 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -1,1218 +1,1206 @@ -/* - * algernon's ErgoDox EZ layout, please see the readme.md file! - */ - -#include "ergodox.h" -#include "led.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "mousekey.h" -#include "timer.h" -#include "keymap_plover.h" -#include "eeconfig.h" -#include "wait.h" +/* + * algernon's ErgoDox EZ layout, please see the readme.md file! + */ + +#include "ergodox.h" +#include "led.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "mousekey.h" +#include "timer.h" +#include "keymap_plover.h" +#include "eeconfig.h" +#include "wait.h" #include "version.h" - -/* Layers */ - -enum { - BASE = 0, - ADORE, - ARRW, - APPSEL, - HUN, - NMDIA, - OHLFT, - OHRGT, - PLVR, -}; - -/* Macros */ - -enum { - NONE = 0, - // Buttons that do extra stuff - A_GUI, - A_PLVR, - A_ESC, - A_MPN, - - // Function / number keys - KF_1, // 1, F1 - KF_2, // 2, F2 - KF_3, // ... - KF_4, - KF_5, - KF_6, - KF_7, - KF_8, - KF_9, - KF_10, - KF_11, // =, F11 - - // Application select keys - APP_SLK, // Slack - APP_EMCS, // Emacs - APP_TERM, // Terminal - APP_CHRM, // Chrome - APP_MSIC, // Music - - // Diagonal mouse movement - A_MUL, - A_MUR, - A_MDL, - A_MDR, - - // Hungarian layer keys - HU_AA, // Á - HU_OO, // Ó - HU_EE, // É - HU_UU, // Ú - HU_II, // Í - HU_OE, // Ö - HU_UE, // Ü - HU_OEE, // Ő - HU_UEE, // Ű - - // One-handed layout specials - OH_BSSPC, - OH_ENTSFT, - OH_BASE, - OH_LEFT, - OH_RIGHT, -}; - -/* Fn keys */ - -enum { - F_BSE = 0, - F_HUN, - F_GUI, - F_SFT, - F_ALT, - F_CTRL -}; - -/* Custom keycodes */ - -enum { - CT_CLN = 0, - CT_MNS, - CT_TA, -}; - -/* States & timers */ - -uint16_t gui_timer = 0; - -uint16_t kf_timers[12]; - -uint16_t oh_base_timer = 0; -uint16_t oh_bsspc_timer = 0; -uint16_t oh_entsft_timer = 0; - -#define OH_BLINK_INTERVAL 500 - -uint8_t oh_left_blink = 0; -uint16_t oh_left_blink_timer = 0; -uint8_t oh_right_blink = 0; -uint16_t oh_right_blink_timer = 0; - -#if KEYLOGGER_ENABLE -bool log_enable = false; -#endif - -bool time_travel = false; - -/* The Keymap */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Keymap 0: Base Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | Next/Prev | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| - * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | 1HND | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | LEAD | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | HUN | | | - * `--------------------' `--------------------' - */ -[BASE] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,M(A_MPN) ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,F(F_ALT),F(F_GUI) - ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) - - // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS - ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),M(OH_LEFT) - ,KC_LEAD - ,F(F_HUN) ,KC_ENT ,KC_SPC - ), - -/* Keymap 1: Adore layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | Next/Prev | , | . | L | W | M | [ | | ] | F | H | C | P | Y | \ | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| - * | Play/Pause| / | Z | ' | K | X | | | | B | G | V | J | Q | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | 1HND | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | LEAD | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | HUN | | | - * `--------------------' `--------------------' - */ -[ADORE] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) -,M(A_MPN) ,KC_COMM ,KC_DOT ,KC_L ,KC_W ,KC_M ,KC_LBRC -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U -,KC_MPLY ,KC_SLSH ,KC_Z ,KC_QUOT,KC_K ,KC_X ,KC_LPRN -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,F(F_ALT),F(F_GUI) - ,F(F_CTRL) - ,KC_BSPC,F(F_SFT),M(A_ESC) - - // right hand - ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 - ,KC_RBRC ,KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS - ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,KC_RPRN ,KC_B ,KC_G ,KC_V ,KC_J ,KC_Q ,KC_MSTP - ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),M(OH_LEFT) - ,KC_LEAD - ,F(F_HUN) ,KC_ENT ,KC_SPC - ), - -/* Keymap 2: Arrow layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | Home | Up | End | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | Left | Down | Rght | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| PgUp | PgDn | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[ARRW] = KEYMAP( -// left hand - KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_PGUP ,KC_PGDN - ), - -/* Keymap 3: Application select layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[APPSEL] = KEYMAP( -// left hand - KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - ), - - -/* Keymap 4: Hungarian Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | Ő | | Ű | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Á | Ó | É | Ú | Í |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | Ö | | Ü | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | BASE | | | - * `--------------------' `--------------------' - */ - -[HUN] = KEYMAP( -// left hand - KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO -,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II) -,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,F(F_BSE),KC_TRNS ,KC_TRNS - ), - -/* Keymap 5: Navigation & Media layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| - * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| - * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | - * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| - * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | Mute | VlUp | | BASE | MClk | - * ,------|------|------| |------+------+------. - * | | | VlDn | | Prev |Left |Right | - * | SPC | Enter|------| |------| Click| Click| - * | | | ESC | | Next | | | - * `--------------------' `--------------------' - */ -[NMDIA] = KEYMAP( -// left hand - KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) -,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO -,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO -,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_MUTE ,KC_VOLU - ,KC_VOLD - ,KC_SPC,KC_ENTER,M(A_ESC) - - // right hand - ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR - ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO - ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_TRNS ,KC_MS_BTN3 - ,KC_MPRV - ,KC_MNXT ,KC_BTN1 ,KC_BTN2 - ), - -/* Keymap 6: One-handed, left side - * - * ,-----------------------------------------------------. - * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 |A BSE| - * |-----------+------+------+------+------+-------------| - * | Tab | ' | , | . | P | Y | [ | - * |-----------+------+------+------+------+------| | - * | - | A | O | E | U | I |------| - * |-----------+------+------+------+------+------| ( | - * | Play/Pause| ; | Q | J | K | X | | - * `-----------+------+------+------+------+-------------' - * | Home | End | Down | Up | ESC | - * `-----------------------------------' - * ,-------------. - * | LAlt | GUI | - * ,------|------|------| - * |BackSp|LShift| Ctrl | - * | | |------| - * |Space |Enter |OTHER | - * `--------------------' - */ -[OHLFT] = KEYMAP( -// left hand - KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,M(OH_BASE) -,KC_TAB ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC -,KC_MINS ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SCLN ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN -,KC_HOME ,KC_END ,KC_DOWN ,KC_UP ,M(A_ESC) - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_RIGHT) - - // right hand - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_NO ,KC_NO - ), - -/* Keymap 7: One-handed, right side - * - * ,-----------------------------------------------------. - * | = F11 | 0 F10| 9 F9 | 8 F8 | 7 F7 | 6 F6 |A BSE| - * |-----------+------+------+------+------+-------------| - * | / | L | R | C | G | F | ] | - * |-----------+------+------+------+------+------| | - * | \ | S | N | T | H | D |------| - * |-----------+------+------+------+------+------| ) | - * | Stop | Z | V | W | M | B | | - * `-----------+------+------+------+------+-------------' - * | PgDn | PgUp | Right| Left | ESC | - * `-----------------------------------' - * ,-------------. - * | LAlt | GUI | - * ,------|------|------| - * |BackSp|LShift| Ctrl | - * | | |------| - * |Space |Enter |OTHER | - * `--------------------' - */ -[OHRGT] = KEYMAP( -// left hand - M(KF_11) ,M(KF_10) ,M(KF_9) ,M(KF_8) ,M(KF_7) ,M(KF_6) ,M(OH_BASE) -,KC_SLSH ,KC_L ,KC_R ,KC_C ,KC_G ,KC_F ,KC_RBRC -,KC_BSLS ,KC_S ,KC_N ,KC_T ,KC_H ,KC_D -,KC_MSTP ,KC_Z ,KC_V ,KC_W ,KC_M ,KC_B ,KC_RPRN -,KC_PGDN ,KC_PGUP ,KC_RGHT ,KC_LEFT ,M(A_ESC) - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_LEFT) - - // right hand - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_NO ,KC_NO - ), - -/* Keymap 8: Steno for Plover - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | BASE | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | T | P | H | |------| |------| | F | P | L | T | D | - * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| - * | | | K | W | R | | | | | | R | B | G | S | Z | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | A | O |------| |------| E | U | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[PLVR] = KEYMAP( -// left hand -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), -KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, -KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, -KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - PV_A, PV_O, KC_NO, - - // right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, - PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, - PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - KC_NO,PV_E, PV_U - ), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) - ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) - ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) - ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) - ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) - ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) -}; - -void toggle_steno(int pressed) -{ - uint8_t layer = biton32(layer_state); - - if (pressed) { - if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); - - register_code(PV_LP); - register_code(PV_LH); - register_code(PV_LR); - register_code(PV_O); - register_code(PV_RL); - register_code(PV_RG); - } else { - unregister_code(PV_LP); - unregister_code(PV_LH); - unregister_code(PV_LR); - unregister_code(PV_O); - unregister_code(PV_RL); - unregister_code(PV_RG); - } -} - -macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) -{ - uint8_t need_shift = 0; - uint8_t hold_shift = 0; - - if (!record->event.pressed) - return MACRO_NONE; - - layer_off (HUN); - - if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { - hold_shift = 1; - need_shift = 1; - unregister_code (KC_LSFT); - } - if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { - need_shift = 1; - hold_shift = 0; - unregister_code (KC_LSFT); - } - - clear_oneshot_mods (); - - register_code (KC_RALT); - unregister_code (KC_RALT); - if (accent == (KC_DQT)) { - register_code (KC_RSFT); - } - register_code (accent); - unregister_code (accent); - if (need_shift && accent != (KC_DQT)) { - register_code (KC_RSFT); - } else if (accent == (KC_DQT) && !need_shift) { - unregister_code (KC_RSFT); - } - register_code (hun_char); - unregister_code (hun_char); - if (need_shift || accent == (KC_DQT)) - unregister_code (KC_RSFT); - if (hold_shift) - register_code (KC_LSFT); - - return MACRO_NONE; -} - -void ang_handle_kf (keyrecord_t *record, uint8_t id) -{ - uint8_t code = id - KF_1; - - if (record->event.pressed) { - kf_timers[code] = timer_read (); - } else { - uint8_t kc; - - if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { - // Long press - kc = KC_F1 + code; - } else { - if (id == KF_11) - kc = KC_EQL; - else - kc = KC_1 + code; - } - - register_code (kc); - unregister_code (kc); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case A_ESC: - if (record->event.pressed) { - if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { - clear_oneshot_mods (); - } else { - register_code (KC_ESC); - } - layer_off (HUN); - } else { - unregister_code (KC_ESC); - } - break; - - case A_MPN: - if (record->event.pressed) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); - - if (oneshot) - clear_oneshot_mods (); - unregister_code (KC_LSFT); - - register_code (KC_MPRV); - unregister_code (KC_MPRV); - - if (!oneshot) - register_code (KC_LSFT); - } else { - return MACRO (T(MNXT), END); - } - } - break; - - /* Hungarian layer */ - case HU_AA: - return ang_do_hun (record, KC_QUOT, KC_A); - case HU_OO: - return ang_do_hun (record, KC_QUOT, KC_O); - case HU_EE: - return ang_do_hun (record, KC_QUOT, KC_E); - case HU_UU: - return ang_do_hun (record, KC_QUOT, KC_U); - case HU_II: - return ang_do_hun (record, KC_QUOT, KC_I); - case HU_OE: - return ang_do_hun (record, KC_DQT, KC_O); - case HU_UE: - return ang_do_hun (record, KC_DQT, KC_U); - case HU_OEE: - return ang_do_hun (record, KC_EQL, KC_O); - case HU_UEE: - return ang_do_hun (record, KC_EQL, KC_U); - - /* Mouse movement */ - case A_MUL: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MUR: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - case A_MDL: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - } - mousekey_send(); - break; - - case A_MDR: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - } - mousekey_send(); - break; - - /* Plover base */ - case A_PLVR: - toggle_steno(record->event.pressed); - break; - - /* GUI & AppSel */ - case A_GUI: - if (record->event.pressed) { - register_code (KC_LGUI); - if (record->tap.count && !record->tap.interrupted) { - if (record->tap.count >= 2) { - register_code (KC_W); - layer_on (APPSEL); - set_oneshot_layer (APPSEL, ONESHOT_START); - } - } else { - record->tap.count = 0; - } - gui_timer = 0; - } else { - if (record->tap.count >= 2) - { - unregister_code (KC_W); - clear_oneshot_layer_state (ONESHOT_PRESSED); - } - gui_timer = timer_read (); - } - break; - - case APP_SLK: - return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); - - case APP_EMCS: - return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(ENT), END); - - case APP_TERM: - return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); - - case APP_CHRM: - return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); - - case APP_MSIC: - return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); - - /* Function keys */ - case KF_1 ... KF_11: - ang_handle_kf (record, id); - break; - - /* 1HAND layout */ - case OH_BASE: - if (record->event.pressed) { - oh_base_timer = timer_read (); - } else { - if (timer_elapsed (oh_base_timer) > TAPPING_TERM) { - layer_clear (); - } else { - return MACRO (T(APP), END); - } - } - break; - - case OH_BSSPC: - if (record->event.pressed) { - oh_bsspc_timer = timer_read (); - } else { - if (timer_elapsed (oh_bsspc_timer) > TAPPING_TERM) { - return MACRO (T(BSPC), END); - } else { - return MACRO (T(SPC), END); - } - } - break; - - case OH_ENTSFT: - if (record->event.pressed) { - oh_entsft_timer = timer_read (); - } else { - if (timer_elapsed (oh_entsft_timer) > TAPPING_TERM) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT)) - unregister_code (KC_LSFT); - else - register_code (KC_LSFT); - } else { - return MACRO (T(ENT), END); - } - } - break; - - case OH_LEFT: - if (record->event.pressed) { - layer_move (OHLFT); - oh_left_blink = 1; - oh_left_blink_timer = timer_read (); - ergodox_right_led_1_on (); - } - break; - - case OH_RIGHT: - if (record->event.pressed) { - layer_move (OHRGT); - oh_right_blink = 1; - oh_right_blink_timer = timer_read (); - ergodox_right_led_3_on (); - } - break; - } - return MACRO_NONE; -}; - -uint8_t is_adore = 0; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - uint8_t dl; - - ergodox_led_all_on(); - for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { - ergodox_led_all_set (i); - wait_ms (5); - } - wait_ms(1000); - for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { - ergodox_led_all_set (i); - wait_ms (10); - } - ergodox_led_all_off(); - - if (!eeconfig_is_enabled()) - eeconfig_init(); - dl = eeconfig_read_default_layer (); - if (dl == (1UL << ADORE)) - is_adore = 1; -}; - -LEADER_EXTERNS(); - -void ang_do_unicode (void) { - register_code (KC_RCTL); - register_code (KC_RSFT); - register_code (KC_U); - unregister_code (KC_U); - unregister_code (KC_RSFT); - unregister_code (KC_RCTL); - wait_ms (100); -} - -void ang_tap (uint16_t codes[]) { - for (int i = 0; codes[i] != 0; i++) { - register_code (codes[i]); - unregister_code (codes[i]); - wait_ms (50); - } -} - -#define TAP_ONCE(code) \ - register_code (code); \ - unregister_code (code) - -void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_RSFT); - register_code (KC_SCLN); - } else if (state->count == 2) { - register_code (KC_SCLN); - } -} - -void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_SCLN); - unregister_code (KC_RSFT); - } else if (state->count == 2) { - unregister_code (KC_SCLN); - } -} - -void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_MINS); - } else if (state->count == 2) { - register_code (KC_RSFT); - register_code (KC_MINS); - } -} - -void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_MINS); - } else if (state->count == 2) { - unregister_code (KC_RSFT); - unregister_code (KC_MINS); - } -} - -typedef struct { - bool layer_toggle; - bool sticky; - bool finished_once; -} td_ta_state_t; - -void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (td_ta->finished_once) { - return; - } - - if (td_ta->sticky) { - td_ta->sticky = false; - td_ta->layer_toggle = false; - layer_off (ARRW); - return; - } - - td_ta->finished_once = true; - if (state->count == 1 && !state->pressed) { - register_code (KC_TAB); - td_ta->sticky = false; - td_ta->layer_toggle = false; - } else { - td_ta->layer_toggle = true; - layer_on (ARRW); - td_ta->sticky = (state->count == 2); - } -} - -void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (!td_ta->layer_toggle) - unregister_code (KC_TAB); - if (!td_ta->sticky) - layer_off (ARRW); - - td_ta->finished_once = false; -} - -const qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) - ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) - ,[CT_TA] = { - .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, - .user_data = (void *)&((td_ta_state_t) { false, false, false }) - } -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) - unregister_code (KC_LGUI); - - if (layer != OHLFT) - oh_left_blink = 0; - if (layer != OHRGT) - oh_right_blink = 0; - - if (layer == HUN) { - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - } else if (layer == NMDIA) { - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - } else if (layer == PLVR) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - } else if (layer == ADORE) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - } - - if (layer == OHLFT || layer == OHRGT) { - ergodox_right_led_2_on(); - - if (oh_left_blink) { - if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL) { - if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) == 0) - ergodox_right_led_1_off (); - } - if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL * 2) { - ergodox_right_led_1_on (); - oh_left_blink_timer = timer_read (); - } - } - - if (oh_right_blink) { - if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL) { - if ((keyboard_report->mods & MOD_BIT(KC_LCTRL)) == 0) - ergodox_right_led_3_off (); - } - if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL * 2) { - ergodox_right_led_3_on (); - oh_right_blink_timer = timer_read (); - } - } - } - - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_1_set (LED_BRIGHTNESS_HI); - ergodox_right_led_1_on (); - } else { - ergodox_right_led_1_set (LED_BRIGHTNESS_LO); - if (layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE) - ergodox_right_led_1_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LALT) || - ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - ergodox_right_led_2_on (); - } else { - ergodox_right_led_2_set (LED_BRIGHTNESS_LO); - if (layer != OHRGT && layer != HUN && layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE) - ergodox_right_led_2_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || - ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_3_set (LED_BRIGHTNESS_HI); - ergodox_right_led_3_on (); - } else { - ergodox_right_led_3_set (LED_BRIGHTNESS_LO); - if (layer != OHRGT && layer != HUN && layer != PLVR && layer != ADORE) - ergodox_right_led_3_off (); - } - - LEADER_DICTIONARY() { - leading = false; - leader_end (); - -#if KEYLOGGER_ENABLE - SEQ_ONE_KEY (KC_D) { - ergodox_led_all_on(); - wait_ms(100); - ergodox_led_all_off(); - log_enable = !log_enable; - } -#endif - - SEQ_ONE_KEY (KC_T) { - time_travel = !time_travel; - } - - SEQ_ONE_KEY (KC_U) { - ang_do_unicode (); - } - - SEQ_ONE_KEY (KC_V) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")"); - } - - SEQ_ONE_KEY (KC_L) { - /* λ */ - ang_do_unicode (); - - uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; - ang_tap (codes); - } - - SEQ_ONE_KEY (KC_Y) { - uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; - ang_tap (codes); - } - - SEQ_ONE_KEY (KC_S) { - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); - TAP_ONCE (KC_BSLS); - register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); - register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); - TAP_ONCE (KC_SLSH); - ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); - } - - SEQ_TWO_KEYS (KC_W, KC_M) { - register_code (KC_LALT); - register_code (KC_F2); - unregister_code (KC_F2); - unregister_code (KC_LALT); - - wait_ms (1000); - - uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; - ang_tap (codes); - register_code (KC_LGUI); - register_code (KC_UP); - unregister_code (KC_UP); - unregister_code (KC_LGUI); - } - - SEQ_ONE_KEY (KC_A) { - if (is_adore == 0) { - default_layer_and (0); - default_layer_or ((1UL << ADORE)); - eeconfig_update_default_layer ((1UL << ADORE)); - is_adore = 1; - - ergodox_led_all_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_3_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_1_off (); - } else { - is_adore = 0; - default_layer_and (0); - default_layer_or (1UL << BASE); - eeconfig_update_default_layer ((1UL << BASE)); - - ergodox_led_all_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_1_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_3_off (); - } - } - } -} - -static uint16_t last4[4]; - -bool process_record_user (uint16_t keycode, keyrecord_t *record) { -#if KEYLOGGER_ENABLE - uint8_t layer = biton32(layer_state); - - if (log_enable && layer == BASE) { - xprintf ("KL: col=%d, row=%d\n", record->event.key.col, - record->event.key.row); - } -#endif - - if (time_travel && !record->event.pressed) { - uint8_t p; - - // shift cache one to the left - for (p = 0; p < 3; p++) { - last4[p] = last4[p + 1]; - } - last4[3] = keycode; - - if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { - uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; - ang_tap (codes); - register_code (KC_RSFT); - register_code (KC_EQL); - unregister_code (KC_EQL); - unregister_code (KC_RSFT); - - uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; - ang_tap (codes2); - - return false; - } - } - - return true; -} + +/* Layers */ + +enum { + BASE = 0, + ADORE, + ARRW, + APPSEL, + HUN, + NMDIA, + PLVR, +}; + +/* Macros */ + +enum { + NONE = 0, + // Buttons that do extra stuff + A_GUI, + A_PLVR, + A_ESC, + A_MPN, + + // Function / number keys + KF_1, // 1, F1 + KF_2, // 2, F2 + KF_3, // ... + KF_4, + KF_5, + KF_6, + KF_7, + KF_8, + KF_9, + KF_10, + KF_11, // =, F11 + + // Application select keys + APP_SLK, // Slack + APP_EMCS, // Emacs + APP_TERM, // Terminal + APP_CHRM, // Chrome + APP_MSIC, // Music + + // Diagonal mouse movement + A_MUL, + A_MUR, + A_MDL, + A_MDR, + + // Hungarian layer keys + HU_AA, // Á + HU_OO, // Ó + HU_EE, // É + HU_UU, // Ú + HU_II, // Í + HU_OE, // Ö + HU_UE, // Ü + HU_OEE, // Ő + HU_UEE, // Ű +}; + +/* Fn keys */ + +enum { + F_BSE = 0, + F_HUN, + F_GUI, + F_SFT, + F_ALT, + F_CTRL +}; + +/* Custom keycodes */ + +enum { + CT_CLN = 0, + CT_MNS, + CT_TA, + CT_LBP, + CT_RBP +}; + +/* States & timers */ + +uint16_t gui_timer = 0; + +uint16_t kf_timers[12]; + +#if KEYLOGGER_ENABLE +bool log_enable = false; +#endif + +bool time_travel = false; + +/* The Keymap */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Base Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Next/Prev | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | ~ | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | + * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------| + * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | : | | - | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | LEAD | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | HUN | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// left hand + M(A_MPN) ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I +,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),M(A_ESC) + + // right hand + ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS + ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL + ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP + ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,KC_LEAD + ,F(F_HUN) ,KC_ENT ,KC_SPC + ), + +/* Keymap 1: Adore layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | Play/Pause| 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | `~ | X | W | K | L | M | ( | | ) | F | H | C | P | Y | \ | + * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| + * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | Z | Q | ' | , | . | : | | - | B | G | V | J | / | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | LAlt | GUI | | MDIA | Del | + * ,------|------|------| |------+------+------. + * | | | Ctrl | | HUN | | | + * |Backsp|LShift|------| |------| Enter| Space| + * | | | ESC | | LEAD | | | + * `--------------------' `--------------------' + */ +[ADORE] = KEYMAP( +// left hand + KC_MPLY ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR) +,KC_GRV ,KC_X ,KC_W ,KC_K ,KC_L ,KC_M ,TD(CT_LBP) +,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U +,KC_NO ,KC_Z ,KC_Q ,KC_QUOT,KC_COMM,KC_DOT ,TD(CT_CLN) +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,F(F_ALT),F(F_GUI) + ,F(F_CTRL) + ,KC_BSPC,F(F_SFT),M(A_ESC) + + // right hand + ,KC_APP ,M(KF_6),M(KF_7),M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11 + ,TD(CT_RBP),KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS + ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL + ,TD(CT_MNS),KC_B ,KC_G ,KC_V ,KC_J ,KC_SLSH ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,OSL(NMDIA),KC_DEL + ,F(F_HUN) + ,KC_LEAD ,KC_ENT ,KC_SPC + ), + +/* Keymap 2: Arrow layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | Home | Up | End | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | Left | Down | Rght | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | Enter| |------| |------| PgUp | PgDn | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[ARRW] = KEYMAP( +// left hand + KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_ENT ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_PGUP ,KC_PGDN + ), + +/* Keymap 3: Application select layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[APPSEL] = KEYMAP( +// left hand + KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + ), + + +/* Keymap 4: Hungarian Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | Ő | | Ű | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | Á | Ó | É | Ú | Í |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | Ö | | Ü | | | | | | | | | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | BASE | | | + * `--------------------' `--------------------' + */ + +[HUN] = KEYMAP( +// left hand + KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO +,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II) +,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,KC_NO ,KC_TRNS ,KC_TRNS + + // right hand + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,F(F_BSE),KC_TRNS ,KC_TRNS + ), + +/* Keymap 5: Navigation & Media layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen| + * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------| + * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | | + * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------| + * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Mute | VlUp | | BASE | MClk | + * ,------|------|------| |------+------+------. + * | | | VlDn | | Prev |Left |Right | + * | SPC | Enter|------| |------| Click| Click| + * | | | ESC | | Next | | | + * `--------------------' `--------------------' + */ +[NMDIA] = KEYMAP( +// left hand + KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L) +,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO +,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO +,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_MUTE ,KC_VOLU + ,KC_VOLD + ,KC_SPC,KC_ENTER,M(A_ESC) + + // right hand + ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR + ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO + ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_TRNS ,KC_MS_BTN3 + ,KC_MPRV + ,KC_MNXT ,KC_BTN1 ,KC_BTN2 + ), + +/* Keymap 6: Steno for Plover + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | BASE | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | T | P | H | |------| |------| | F | P | L | T | D | + * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| + * | | | K | W | R | | | | | | R | B | G | S | Z | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | A | O |------| |------| E | U | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[PLVR] = KEYMAP( +// left hand +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), +KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, +KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, +KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + PV_A, PV_O, KC_NO, + + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, + PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, + PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO,PV_E, PV_U + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) + ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) + ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) + ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) + ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) + ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) +}; + +void toggle_steno(int pressed) +{ + uint8_t layer = biton32(layer_state); + + if (pressed) { + if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); + + register_code(PV_LP); + register_code(PV_LH); + register_code(PV_LR); + register_code(PV_O); + register_code(PV_RL); + register_code(PV_RG); + } else { + unregister_code(PV_LP); + unregister_code(PV_LH); + unregister_code(PV_LR); + unregister_code(PV_O); + unregister_code(PV_RL); + unregister_code(PV_RG); + } +} + +macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) +{ + uint8_t need_shift = 0; + uint8_t hold_shift = 0; + + if (!record->event.pressed) + return MACRO_NONE; + + layer_off (HUN); + + if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { + hold_shift = 1; + need_shift = 1; + unregister_code (KC_LSFT); + } + if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { + need_shift = 1; + hold_shift = 0; + unregister_code (KC_LSFT); + } + + clear_oneshot_mods (); + + register_code (KC_RALT); + unregister_code (KC_RALT); + if (accent == (KC_DQT)) { + register_code (KC_RSFT); + } + register_code (accent); + unregister_code (accent); + if (need_shift && accent != (KC_DQT)) { + register_code (KC_RSFT); + } else if (accent == (KC_DQT) && !need_shift) { + unregister_code (KC_RSFT); + } + register_code (hun_char); + unregister_code (hun_char); + if (need_shift || accent == (KC_DQT)) + unregister_code (KC_RSFT); + if (hold_shift) + register_code (KC_LSFT); + + return MACRO_NONE; +} + +void ang_handle_kf (keyrecord_t *record, uint8_t id) +{ + uint8_t code = id - KF_1; + + if (record->event.pressed) { + kf_timers[code] = timer_read (); + } else { + uint8_t kc; + + if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) { + // Long press + kc = KC_F1 + code; + } else { + if (id == KF_11) + kc = KC_EQL; + else + kc = KC_1 + code; + } + + register_code (kc); + unregister_code (kc); + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case A_ESC: + if (record->event.pressed) { + if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { + clear_oneshot_mods (); + } else { + register_code (KC_ESC); + } + layer_off (HUN); + } else { + unregister_code (KC_ESC); + } + break; + + case A_MPN: + if (record->event.pressed) { + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); + + if (oneshot) + clear_oneshot_mods (); + unregister_code (KC_LSFT); + + register_code (KC_MPRV); + unregister_code (KC_MPRV); + + if (!oneshot) + register_code (KC_LSFT); + } else { + return MACRO (T(MNXT), END); + } + } + break; + + /* Hungarian layer */ + case HU_AA: + return ang_do_hun (record, KC_QUOT, KC_A); + case HU_OO: + return ang_do_hun (record, KC_QUOT, KC_O); + case HU_EE: + return ang_do_hun (record, KC_QUOT, KC_E); + case HU_UU: + return ang_do_hun (record, KC_QUOT, KC_U); + case HU_II: + return ang_do_hun (record, KC_QUOT, KC_I); + case HU_OE: + return ang_do_hun (record, KC_DQT, KC_O); + case HU_UE: + return ang_do_hun (record, KC_DQT, KC_U); + case HU_OEE: + return ang_do_hun (record, KC_EQL, KC_O); + case HU_UEE: + return ang_do_hun (record, KC_EQL, KC_U); + + /* Mouse movement */ + case A_MUL: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MUR: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case A_MDL: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MDR: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + /* Plover base */ + case A_PLVR: + toggle_steno(record->event.pressed); + break; + + /* GUI & AppSel */ + case A_GUI: + if (record->event.pressed) { + register_code (KC_LGUI); + if (record->tap.count && !record->tap.interrupted) { + if (record->tap.count >= 2) { + register_code (KC_W); + layer_on (APPSEL); + set_oneshot_layer (APPSEL, ONESHOT_START); + } + } else { + record->tap.count = 0; + } + gui_timer = 0; + } else { + if (record->tap.count >= 2) + { + unregister_code (KC_W); + clear_oneshot_layer_state (ONESHOT_PRESSED); + } + gui_timer = timer_read (); + } + break; + + case APP_SLK: + return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END); + + case APP_EMCS: + return MACRODOWN(T(G), T(N), T(U), T(SPC), T(E), T(M), T(A), T(C), T(S), T(SPC), T(2), T(4), T(ENT), END); + + case APP_TERM: + return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END); + + case APP_CHRM: + return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END); + + case APP_MSIC: + return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END); + + /* Function keys */ + case KF_1 ... KF_11: + ang_handle_kf (record, id); + break; + } + + return MACRO_NONE; +}; + +uint8_t is_adore = 0; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + uint8_t dl; + + ergodox_led_all_on(); + for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { + ergodox_led_all_set (i); + wait_ms (5); + } + wait_ms(1000); + for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { + ergodox_led_all_set (i); + wait_ms (10); + } + ergodox_led_all_off(); + + if (!eeconfig_is_enabled()) + eeconfig_init(); + dl = eeconfig_read_default_layer (); + if (dl == (1UL << ADORE)) { + is_adore = 1; +#if ADORE_AUTOLOG + log_enable = true; +#endif + } +}; + +LEADER_EXTERNS(); + +void ang_do_unicode (void) { + register_code (KC_RCTL); + register_code (KC_RSFT); + register_code (KC_U); + unregister_code (KC_U); + unregister_code (KC_RSFT); + unregister_code (KC_RCTL); + wait_ms (100); +} + +void ang_tap (uint16_t codes[]) { + for (int i = 0; codes[i] != 0; i++) { + register_code (codes[i]); + unregister_code (codes[i]); + wait_ms (50); + } +} + +#define TAP_ONCE(code) \ + register_code (code); \ + unregister_code (code) + +void ang_tap_dance_bp_finished (qk_tap_dance_state_t *state, void *user_data) { + bool left, parens; + + if (state->count > 2) { + state->count = 0; + return; + } + + if (state->keycode == TD(CT_LBP)) + left = true; + else + left = false; + + if (state->count == 1) + parens = false; + else + parens = true; + + if (parens) { + register_code (KC_RSFT); + if (left) { + TAP_ONCE(KC_9); + } else { + TAP_ONCE(KC_0); + } + unregister_code (KC_RSFT); + } else { + if (left) { + TAP_ONCE (KC_LBRC); + } else { + TAP_ONCE (KC_RBRC); + } + } +} + +void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_RSFT); + register_code (KC_SCLN); + } else if (state->count == 2) { + register_code (KC_SCLN); + } +} + +void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_SCLN); + unregister_code (KC_RSFT); + } else if (state->count == 2) { + unregister_code (KC_SCLN); + } +} + +void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_MINS); + } else if (state->count == 2) { + register_code (KC_RSFT); + register_code (KC_MINS); + } +} + +void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_MINS); + } else if (state->count == 2) { + unregister_code (KC_RSFT); + unregister_code (KC_MINS); + } +} + +typedef struct { + bool layer_toggle; + bool sticky; + bool finished_once; +} td_ta_state_t; + +void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (td_ta->finished_once) { + return; + } + + if (td_ta->sticky) { + td_ta->sticky = false; + td_ta->layer_toggle = false; + layer_off (ARRW); + return; + } + + td_ta->finished_once = true; + if (state->count == 1 && !state->pressed) { + register_code (KC_TAB); + td_ta->sticky = false; + td_ta->layer_toggle = false; + } else { + td_ta->layer_toggle = true; + layer_on (ARRW); + td_ta->sticky = (state->count == 2); + } +} + +void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { + td_ta_state_t *td_ta = (td_ta_state_t *) user_data; + + if (!td_ta->layer_toggle) + unregister_code (KC_TAB); + if (!td_ta->sticky) + layer_off (ARRW); + + td_ta->finished_once = false; +} + +const qk_tap_dance_action_t tap_dance_actions[] = { + [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) + ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) + ,[CT_TA] = { + .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, + .user_data = (void *)&((td_ta_state_t) { false, false, false }) + } + ,[CT_LBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) + ,[CT_RBP] = ACTION_TAP_DANCE_FN (ang_tap_dance_bp_finished) +}; + +static uint16_t uni[32]; +static uint8_t unicnt; +static bool unimagic = false; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) + unregister_code (KC_LGUI); + + if (layer == HUN) { + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + } else if (layer == NMDIA) { + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + } else if (layer == PLVR) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + } else if (layer == ADORE) { + ergodox_right_led_1_on (); + ergodox_right_led_2_on (); + ergodox_right_led_3_on (); + + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + } + + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_1_set (LED_BRIGHTNESS_HI); + ergodox_right_led_1_on (); + } else { + ergodox_right_led_1_set (LED_BRIGHTNESS_LO); + if (layer != NMDIA && layer != PLVR && layer != ADORE) + ergodox_right_led_1_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LALT) || + ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_2_set (LED_BRIGHTNESS_HI); + ergodox_right_led_2_on (); + } else { + ergodox_right_led_2_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE) + ergodox_right_led_2_off (); + } + + if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || + ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { + ergodox_right_led_3_set (LED_BRIGHTNESS_HI); + ergodox_right_led_3_on (); + } else { + ergodox_right_led_3_set (LED_BRIGHTNESS_LO); + if (layer != HUN && layer != PLVR && layer != ADORE) + ergodox_right_led_3_off (); + } + + LEADER_DICTIONARY() { + leading = false; + leader_end (); + +#if KEYLOGGER_ENABLE + SEQ_ONE_KEY (KC_D) { + ergodox_led_all_on(); + wait_ms(100); + ergodox_led_all_off(); + log_enable = !log_enable; + } +#endif + + SEQ_ONE_KEY (KC_T) { + time_travel = !time_travel; + } + + SEQ_ONE_KEY (KC_U) { + ang_do_unicode (); + } + + SEQ_TWO_KEYS (KC_LEAD, KC_U) { + unicnt = 0; + unimagic = true; + register_code(KC_RSFT); + TAP_ONCE(KC_U); + unregister_code(KC_RSFT); + } + + SEQ_ONE_KEY (KC_V) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")"); + } + + SEQ_ONE_KEY (KC_L) { + /* λ */ + ang_do_unicode (); + + uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0}; + ang_tap (codes); + } + + SEQ_ONE_KEY (KC_Y) { + uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0}; + ang_tap (codes); + } + + SEQ_ONE_KEY (KC_S) { + ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + TAP_ONCE (KC_BSLS); + register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); + ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC); + register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); + TAP_ONCE (KC_SLSH); + ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC); + } + + SEQ_TWO_KEYS (KC_W, KC_M) { + register_code (KC_LALT); + register_code (KC_F2); + unregister_code (KC_F2); + unregister_code (KC_LALT); + + wait_ms (1000); + + uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; + ang_tap (codes); + register_code (KC_LGUI); + register_code (KC_UP); + unregister_code (KC_UP); + unregister_code (KC_LGUI); + } + + SEQ_ONE_KEY (KC_A) { + if (is_adore == 0) { + default_layer_and (0); + default_layer_or ((1UL << ADORE)); + eeconfig_update_default_layer ((1UL << ADORE)); + is_adore = 1; + + ergodox_led_all_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_3_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_1_off (); +#if ADORE_AUTOLOG + log_enable = true; +#endif + } else { +#if ADORE_AUTOLOG + log_enable = false; +#endif + is_adore = 0; + default_layer_and (0); + default_layer_or (1UL << BASE); + eeconfig_update_default_layer ((1UL << BASE)); + + ergodox_led_all_off (); + ergodox_right_led_1_on (); + wait_ms (100); + ergodox_right_led_2_on (); + wait_ms (100); + ergodox_right_led_1_off (); + ergodox_right_led_3_on (); + wait_ms (100); + ergodox_right_led_2_off (); + wait_ms (100); + ergodox_right_led_3_off (); + } + } + } +} + +static uint16_t last4[4]; + +bool is_uni_seq(char *seq) { + uint8_t i; + + for (i = 0; seq[i]; i++) { + uint16_t code; + if (('1' <= seq[i]) && (seq[i] <= '9')) + code = seq[i] - '1' + KC_1; + else if (seq[i] == '0') + code = KC_0; + else + code = seq[i] - 'a' + KC_A; + + if (i > unicnt) + return false; + if (uni[i] != code) + return false; + } + + if (uni[i] == KC_ENT || uni[i] == KC_SPC) + return true; + + return false; +} + +uint16_t hex_to_keycode(uint8_t hex) +{ + if (hex == 0x0) { + return KC_0; + } else if (hex < 0xA) { + return KC_1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + +void register_hex(uint16_t hex) { + bool leading_zeros = true; + + for(int i = 3; i >= 0; i--) { + uint8_t digit = ((hex >> (i*4)) & 0xF); + if (digit != 0) + leading_zeros = false; + else if (leading_zeros) + continue; + register_code(hex_to_keycode(digit)); + unregister_code(hex_to_keycode(digit)); + wait_ms(10); + } +} + +typedef struct { + char *symbol; + uint16_t codes[4]; +} qk_ucis_symbol_t; + +static qk_ucis_symbol_t ucis_symbol_table[] = { + {"poop", {0x1, 0xf4a9, 0}}, + {"rofl", {0x1, 0xf923, 0}}, + {"kiss", {0x1, 0xf619, 0}}, + {"snowman", {0x2603, 0}}, + {NULL, {}} +}; + +bool process_record_ucis (uint16_t keycode, keyrecord_t *record) { + uint8_t i; + + if (!unimagic) + return true; + + if (!record->event.pressed) + return true; + + uni[unicnt] = keycode; + unicnt++; + + if (keycode == KC_BSPC) { + if (unicnt >= 2) { + unicnt-= 2; + return true; + } else { + unicnt--; + return false; + } + } + + if (keycode == KC_ENT || keycode == KC_SPC) { + bool symbol_found = false; + + for (i = unicnt; i > 0; i--) { + register_code (KC_BSPC); + unregister_code (KC_BSPC); + wait_ms(10); + } + + ang_do_unicode(); + wait_ms(10); + for (i = 0; ucis_symbol_table[i].symbol; i++) { + if (is_uni_seq (ucis_symbol_table[i].symbol)) { + symbol_found = true; + for (uint8_t j = 0; ucis_symbol_table[i].codes[j]; j++) { + register_hex(ucis_symbol_table[i].codes[j]); + } + break; + } + } + if (!symbol_found) { + for (i = 0; i < unicnt - 1; i++) { + uint8_t code; + + if (uni[i] > KF_1) + code = uni[i] - KF_1 + KC_1; + else + code = uni[i]; + TAP_ONCE(code); + wait_ms (10); + } + } + + unimagic = false; + return true; + } + return true; +} + +bool process_record_user (uint16_t keycode, keyrecord_t *record) { +#if KEYLOGGER_ENABLE + if (log_enable) { + xprintf ("KL: col=%d, row=%d\n", record->event.key.col, + record->event.key.row); + } +#endif + + if (!process_record_ucis (keycode, record)) + return false; + + if (time_travel && !record->event.pressed) { + uint8_t p; + + // shift cache one to the left + for (p = 0; p < 3; p++) { + last4[p] = last4[p + 1]; + } + last4[3] = keycode; + + if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { + uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0}; + ang_tap (codes); + register_code (KC_RSFT); + register_code (KC_EQL); + unregister_code (KC_EQL); + unregister_code (KC_RSFT); + + uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0}; + ang_tap (codes2); + + return false; + } + } + + return true; +} diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md index 6fe1775111..26dfddbe6a 100644 --- a/keyboards/ergodox/keymaps/algernon/readme.md +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -16,11 +16,12 @@ Some of the things in the layout only work when one uses Spacemacs and GNOME und - [ADORE layer](#adore-layer) - [Hungarian layer](#hungarian-layer) - [Navigation and media layer](#navigation-and-media-layer) - - [One-handed layer](#one-handed-layer) - [Steno layer](#steno-layer) - [LED states](#led-states) * [Tools](#tools) - [Heatmap](#heatmap) +* [Special features](#special-features) + - [Unicode Symbol Input](#unicode-symbol-input) * [Building](#building) - [Using on Windows](#using-on-windows) * [Changelog](#changelog) @@ -38,7 +39,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest * The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. * The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. * The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. -* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles. +* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. * When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. * Tapping the `:` key once yields `:`, tapping it twice yields `;`. * The **Lead** key allows me to type in a sequence of keys, and trigger some actions: @@ -51,6 +52,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest - `LEAD v` prints the firmware version, the keyboard and the keymap. - `LEAD d` toggles logging keypress positions to the HID console. - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. + - `LEAD LEAD u` enters the [Unicode symbol input][#unicode-symbol-input] mode. ## ADORE layer @@ -74,20 +76,6 @@ On this layer, the accented characters are at the same position as their base va This layer is primarily for navigating with the cursor or the mouse, and some media things. -## One-handed layer - -[![One-handed layer](images/one-handed-layer.png)](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece) - -The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half. - -The differences are as follows: - -* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap. -* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides: - - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap. - - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap. -* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual. - ## Steno layer [![Steno layer for Plover](images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) @@ -103,11 +91,25 @@ For the layers, the following rules apply: * When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. * When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. * When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. -* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side. * For the [Steno layer](#steno-layer), all LEDs will be turned on. Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. +# Special features + +## Unicode Symbol Input + +Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes. + +The currently supported symbols are: + +- `snowman`: ☃ +- `kiss`: 😙 +- `rofl`: 🤣 +- `poop`: 💩 + +This is an experimental feature, and may or may not work reliably. + # Tools ## Heatmap @@ -133,14 +135,14 @@ To make my workflow easier, this layout is maintained in [its own repository][al $ git clone https://github.com/jackhumbert/qmk_firmware.git $ cd qmk_firmware $ git clone https://github.com/algernon/ergodox-layout.git \ - keyboards/ergodox_ez/keymaps/algernon-master -$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master + keyboards/ergodox/keymaps/algernon-master +$ make keyboard=ergodox keymap=algernon-master ``` From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware): ``` -$ make KEYBOARD=ergodox_ez KEYMAP=algernon +$ make keyboard=ergodox keymap=algernon ``` ## Using on Windows @@ -149,6 +151,16 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the # Changelog +## v1.5 - 2016-08-12 + +* The **1HAND** layer has been removed. +* A `Delete` key is now available on the right thumb cluster. +* The [ADORE](#adore-layer) layer received a major update, see the layout image above. +* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. +* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer). +* On the **ARROW** layer, `Backspace` has been replaced by `Enter`. +* There is some experimental support for entering Unicode symbols. + ## v1.4 - 2016-07-29 * When toggling the key logging on or off, the LEDs will do a little dance. -- cgit v1.2.3 From cafa528b88c097f02ae92a5b15b015f5653cefe7 Mon Sep 17 00:00:00 2001 From: Toni Date: Fri, 12 Aug 2016 19:14:48 +0200 Subject: only aesthetics --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 71c205a489..9f838ba617 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -67,10 +67,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_TAB] = KEYMAP_ISO_SPLITRSHIFT( - KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) -- cgit v1.2.3 From 458607ee5eafe1cc095b258cac014c334d8e7b72 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Fri, 12 Aug 2016 22:26:30 -0700 Subject: Corrections to the Atreus Makefile and updates to my keymap --- keyboards/atreus/keymaps/xyverz/keymap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index 0238fdbd39..02a661c8e3 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -46,14 +46,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_L1] = { /* LAYER 1 */ {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, - {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } }, [_L2] = { /* LAYER 2 */ {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, +<<<<<<< HEAD {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET } +======= + {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET} +>>>>>>> e1abe4c... Corrections to the Atreus Makefile and updates to my keymap } }; -- cgit v1.2.3 From 3bae791372e2090b30647d431c70c233caaef26f Mon Sep 17 00:00:00 2001 From: Xyverz Date: Fri, 12 Aug 2016 22:30:01 -0700 Subject: Update keymap.c --- keyboards/atreus/keymaps/xyverz/keymap.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index 02a661c8e3..b418cc9b5e 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -53,11 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, -<<<<<<< HEAD - {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET } -======= {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET} ->>>>>>> e1abe4c... Corrections to the Atreus Makefile and updates to my keymap } }; -- cgit v1.2.3 From c07fe96581f02d0ea14c50cda7565aa52406c122 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Fri, 12 Aug 2016 23:45:40 -0700 Subject: Adding the MiniVan44 aka TheVan 44 by u/evangs to the repo. Initial Commit. --- keyboards/minivan44/Makefile | 75 ++++++++++++ keyboards/minivan44/config.h | 162 ++++++++++++++++++++++++++ keyboards/minivan44/keymaps/default/Makefile | 21 ++++ keyboards/minivan44/keymaps/default/config.h | 8 ++ keyboards/minivan44/keymaps/default/keymap.c | 97 +++++++++++++++ keyboards/minivan44/keymaps/default/readme.md | 1 + keyboards/minivan44/keymaps/xyverz/Makefile | 21 ++++ keyboards/minivan44/keymaps/xyverz/config.h | 8 ++ keyboards/minivan44/keymaps/xyverz/keymap.c | 92 +++++++++++++++ keyboards/minivan44/keymaps/xyverz/readme.md | 1 + keyboards/minivan44/minivan44.c | 28 +++++ keyboards/minivan44/minivan44.h | 22 ++++ keyboards/minivan44/readme.md | 28 +++++ 13 files changed, 564 insertions(+) create mode 100644 keyboards/minivan44/Makefile create mode 100644 keyboards/minivan44/config.h create mode 100644 keyboards/minivan44/keymaps/default/Makefile create mode 100644 keyboards/minivan44/keymaps/default/config.h create mode 100644 keyboards/minivan44/keymaps/default/keymap.c create mode 100644 keyboards/minivan44/keymaps/default/readme.md create mode 100644 keyboards/minivan44/keymaps/xyverz/Makefile create mode 100644 keyboards/minivan44/keymaps/xyverz/config.h create mode 100644 keyboards/minivan44/keymaps/xyverz/keymap.c create mode 100644 keyboards/minivan44/keymaps/xyverz/readme.md create mode 100644 keyboards/minivan44/minivan44.c create mode 100644 keyboards/minivan44/minivan44.h create mode 100644 keyboards/minivan44/readme.md (limited to 'keyboards') diff --git a/keyboards/minivan44/Makefile b/keyboards/minivan44/Makefile new file mode 100644 index 0000000000..45ca127807 --- /dev/null +++ b/keyboards/minivan44/Makefile @@ -0,0 +1,75 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../Makefile +endif + + diff --git a/keyboards/minivan44/config.h b/keyboards/minivan44/config.h new file mode 100644 index 0000000000..0ae93c0957 --- /dev/null +++ b/keyboards/minivan44/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8844 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Evan Sailer +#define PRODUCT TheVan 44 +#define DESCRIPTION keyboard firmware for TV44 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D7, B5, F7, D4 } +#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/minivan44/keymaps/default/Makefile b/keyboards/minivan44/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/minivan44/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/default/config.h b/keyboards/minivan44/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/minivan44/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/default/keymap.c b/keyboards/minivan44/keymaps/default/keymap.c new file mode 100644 index 0000000000..d559a4b1c7 --- /dev/null +++ b/keyboards/minivan44/keymaps/default/keymap.c @@ -0,0 +1,97 @@ +#include "minivan44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 +#define _L3 5 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_DV] = { /* Dvorak */ + {KC_TAB, KC_COMM, KC_DOT, KC_SLSH, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_L1] = { /* LAYER 1 */ + {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L2] = { /* LAYER 2 */ + {_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ }, + {KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ }, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L3] = { /* LAYER 3 */ + {_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ }, + {KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ }, + {KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ }, + {_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/minivan44/keymaps/default/readme.md b/keyboards/minivan44/keymaps/default/readme.md new file mode 100644 index 0000000000..189a9c0ff8 --- /dev/null +++ b/keyboards/minivan44/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for minivan44 \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/Makefile b/keyboards/minivan44/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/minivan44/keymaps/xyverz/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/config.h b/keyboards/minivan44/keymaps/xyverz/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/minivan44/keymaps/xyverz/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/keymap.c b/keyboards/minivan44/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..f995da0e7e --- /dev/null +++ b/keyboards/minivan44/keymaps/xyverz/keymap.c @@ -0,0 +1,92 @@ +#include "minivan44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* 0: Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_QW] = { /* 1: Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_CM] = { /* 2: Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_L1] = {/* 1: FN 1 */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ } + }, + + [_L2] = { /* 2: FN 2 */ + {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC }, + {_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ } + } + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + + diff --git a/keyboards/minivan44/keymaps/xyverz/readme.md b/keyboards/minivan44/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..189a9c0ff8 --- /dev/null +++ b/keyboards/minivan44/keymaps/xyverz/readme.md @@ -0,0 +1 @@ +# The default keymap for minivan44 \ No newline at end of file diff --git a/keyboards/minivan44/minivan44.c b/keyboards/minivan44/minivan44.c new file mode 100644 index 0000000000..be8214fd5d --- /dev/null +++ b/keyboards/minivan44/minivan44.c @@ -0,0 +1,28 @@ +#include "minivan44.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/minivan44/minivan44.h b/keyboards/minivan44/minivan44.h new file mode 100644 index 0000000000..c6119c2e16 --- /dev/null +++ b/keyboards/minivan44/minivan44.h @@ -0,0 +1,22 @@ +#ifndef MINIVAN44_H +#define MINIVAN44_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K37, K38, K39, K3B \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \ + +#endif diff --git a/keyboards/minivan44/readme.md b/keyboards/minivan44/readme.md new file mode 100644 index 0000000000..59b62b0e66 --- /dev/null +++ b/keyboards/minivan44/readme.md @@ -0,0 +1,28 @@ +minivan44 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/minivan44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file -- cgit v1.2.3 From 2d0f585e426084b13fecc642cdda77506e2bfbf9 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Sat, 13 Aug 2016 10:36:08 -0700 Subject: Renamed minivan44 to tv44 in all occurrences per wishes of Jack and Evan. --- keyboards/tv44/Makefile | 75 ++++++++++++++ keyboards/tv44/config.h | 162 +++++++++++++++++++++++++++++++ keyboards/tv44/keymaps/default/Makefile | 21 ++++ keyboards/tv44/keymaps/default/config.h | 8 ++ keyboards/tv44/keymaps/default/keymap.c | 97 ++++++++++++++++++ keyboards/tv44/keymaps/default/readme.md | 1 + keyboards/tv44/keymaps/xyverz/Makefile | 21 ++++ keyboards/tv44/keymaps/xyverz/config.h | 8 ++ keyboards/tv44/keymaps/xyverz/keymap.c | 92 ++++++++++++++++++ keyboards/tv44/keymaps/xyverz/readme.md | 1 + keyboards/tv44/readme.md | 28 ++++++ keyboards/tv44/tv44.c | 28 ++++++ keyboards/tv44/tv44.h | 22 +++++ 13 files changed, 564 insertions(+) create mode 100644 keyboards/tv44/Makefile create mode 100644 keyboards/tv44/config.h create mode 100644 keyboards/tv44/keymaps/default/Makefile create mode 100644 keyboards/tv44/keymaps/default/config.h create mode 100644 keyboards/tv44/keymaps/default/keymap.c create mode 100644 keyboards/tv44/keymaps/default/readme.md create mode 100644 keyboards/tv44/keymaps/xyverz/Makefile create mode 100644 keyboards/tv44/keymaps/xyverz/config.h create mode 100644 keyboards/tv44/keymaps/xyverz/keymap.c create mode 100644 keyboards/tv44/keymaps/xyverz/readme.md create mode 100644 keyboards/tv44/readme.md create mode 100644 keyboards/tv44/tv44.c create mode 100644 keyboards/tv44/tv44.h (limited to 'keyboards') diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile new file mode 100644 index 0000000000..45ca127807 --- /dev/null +++ b/keyboards/tv44/Makefile @@ -0,0 +1,75 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../Makefile +endif + + diff --git a/keyboards/tv44/config.h b/keyboards/tv44/config.h new file mode 100644 index 0000000000..0ae93c0957 --- /dev/null +++ b/keyboards/tv44/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8844 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Evan Sailer +#define PRODUCT TheVan 44 +#define DESCRIPTION keyboard firmware for TV44 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D7, B5, F7, D4 } +#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/tv44/keymaps/default/Makefile b/keyboards/tv44/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/tv44/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/default/config.h b/keyboards/tv44/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/tv44/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c new file mode 100644 index 0000000000..6a4fef3da2 --- /dev/null +++ b/keyboards/tv44/keymaps/default/keymap.c @@ -0,0 +1,97 @@ +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 +#define _L3 5 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_DV] = { /* Dvorak */ + {KC_TAB, KC_COMM, KC_DOT, KC_SLSH, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } + }, + [_L1] = { /* LAYER 1 */ + {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L2] = { /* LAYER 2 */ + {_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ }, + {KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ }, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } + }, + [_L3] = { /* LAYER 3 */ + {_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ }, + {KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ }, + {KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ }, + {_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/tv44/keymaps/default/readme.md b/keyboards/tv44/keymaps/default/readme.md new file mode 100644 index 0000000000..ac84c08cfa --- /dev/null +++ b/keyboards/tv44/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for tv44 \ No newline at end of file diff --git a/keyboards/tv44/keymaps/xyverz/Makefile b/keyboards/tv44/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/xyverz/config.h b/keyboards/tv44/keymaps/xyverz/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/xyverz/keymap.c b/keyboards/tv44/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..8cbcf8d35a --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/keymap.c @@ -0,0 +1,92 @@ +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DV] = { /* 0: Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT }, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_QW] = { /* 1: Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_CM] = { /* 2: Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + }, + + [_L1] = {/* 1: FN 1 */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, + {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, + {KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ } + }, + + [_L2] = { /* 2: FN 2 */ + {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC }, + {_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT }, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ } + } + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + + diff --git a/keyboards/tv44/keymaps/xyverz/readme.md b/keyboards/tv44/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..ac84c08cfa --- /dev/null +++ b/keyboards/tv44/keymaps/xyverz/readme.md @@ -0,0 +1 @@ +# The default keymap for tv44 \ No newline at end of file diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md new file mode 100644 index 0000000000..e3b557fe2d --- /dev/null +++ b/keyboards/tv44/readme.md @@ -0,0 +1,28 @@ +tv44 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file diff --git a/keyboards/tv44/tv44.c b/keyboards/tv44/tv44.c new file mode 100644 index 0000000000..6dc0efd28e --- /dev/null +++ b/keyboards/tv44/tv44.c @@ -0,0 +1,28 @@ +#include "tv44.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/tv44/tv44.h b/keyboards/tv44/tv44.h new file mode 100644 index 0000000000..4c30174acc --- /dev/null +++ b/keyboards/tv44/tv44.h @@ -0,0 +1,22 @@ +#ifndef TV44_H +#define TV44_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K37, K38, K39, K3B \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \ + +#endif -- cgit v1.2.3 From e87506767cec6410d1a93c15d68452815c9c3553 Mon Sep 17 00:00:00 2001 From: Ian Sterling Date: Sat, 13 Aug 2016 10:44:42 -0700 Subject: Removal of old minivan44 folder. --- keyboards/minivan44/Makefile | 75 ------------ keyboards/minivan44/config.h | 162 -------------------------- keyboards/minivan44/keymaps/default/Makefile | 21 ---- keyboards/minivan44/keymaps/default/config.h | 8 -- keyboards/minivan44/keymaps/default/keymap.c | 97 --------------- keyboards/minivan44/keymaps/default/readme.md | 1 - keyboards/minivan44/keymaps/xyverz/Makefile | 21 ---- keyboards/minivan44/keymaps/xyverz/config.h | 8 -- keyboards/minivan44/keymaps/xyverz/keymap.c | 92 --------------- keyboards/minivan44/keymaps/xyverz/readme.md | 1 - keyboards/minivan44/minivan44.c | 28 ----- keyboards/minivan44/minivan44.h | 22 ---- keyboards/minivan44/readme.md | 28 ----- 13 files changed, 564 deletions(-) delete mode 100644 keyboards/minivan44/Makefile delete mode 100644 keyboards/minivan44/config.h delete mode 100644 keyboards/minivan44/keymaps/default/Makefile delete mode 100644 keyboards/minivan44/keymaps/default/config.h delete mode 100644 keyboards/minivan44/keymaps/default/keymap.c delete mode 100644 keyboards/minivan44/keymaps/default/readme.md delete mode 100644 keyboards/minivan44/keymaps/xyverz/Makefile delete mode 100644 keyboards/minivan44/keymaps/xyverz/config.h delete mode 100644 keyboards/minivan44/keymaps/xyverz/keymap.c delete mode 100644 keyboards/minivan44/keymaps/xyverz/readme.md delete mode 100644 keyboards/minivan44/minivan44.c delete mode 100644 keyboards/minivan44/minivan44.h delete mode 100644 keyboards/minivan44/readme.md (limited to 'keyboards') diff --git a/keyboards/minivan44/Makefile b/keyboards/minivan44/Makefile deleted file mode 100644 index 45ca127807..0000000000 --- a/keyboards/minivan44/Makefile +++ /dev/null @@ -1,75 +0,0 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= yes # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR - include ../../Makefile -endif - - diff --git a/keyboards/minivan44/config.h b/keyboards/minivan44/config.h deleted file mode 100644 index 0ae93c0957..0000000000 --- a/keyboards/minivan44/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEAE -#define PRODUCT_ID 0x8844 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Evan Sailer -#define PRODUCT TheVan 44 -#define DESCRIPTION keyboard firmware for TV44 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D7, B5, F7, D4 } -#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/minivan44/keymaps/default/Makefile b/keyboards/minivan44/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/minivan44/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/default/config.h b/keyboards/minivan44/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/minivan44/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/default/keymap.c b/keyboards/minivan44/keymaps/default/keymap.c deleted file mode 100644 index d559a4b1c7..0000000000 --- a/keyboards/minivan44/keymaps/default/keymap.c +++ /dev/null @@ -1,97 +0,0 @@ -#include "minivan44.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _QW 0 -#define _DV 1 -#define _CM 2 -#define _L1 3 -#define _L2 4 -#define _L3 5 - -// Macro name shortcuts -#define QWERTY M(_QW) -#define DVORAK M(_DV) -#define COLEMAK M(_CM) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = { /* Qwerty */ - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, - {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } - }, - [_DV] = { /* Dvorak */ - {KC_TAB, KC_COMM, KC_DOT, KC_SLSH, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_Q, KC_BSPC }, - {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1) }, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2) }, - {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } - }, - [_CM] = { /* Colemak */ - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, - {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1) }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, - {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } - }, - [_L1] = { /* LAYER 1 */ - {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, - {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, - {_______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, - {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } - }, - [_L2] = { /* LAYER 2 */ - {_______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______ }, - {KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4, KC_5, KC_6, KC_VOLU, KC_ENT }, - {_______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______ }, - {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ } - }, - [_L3] = { /* LAYER 3 */ - {_______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______ }, - {KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______ }, - {KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______ }, - {_______, KC_LSFT, KC_B, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_C, _______, _______, XXXXXXX, _______ } - } -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DV: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_DV); - } - break; - case _QW: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_QW); - } - break; - case _CM: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_CM); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/minivan44/keymaps/default/readme.md b/keyboards/minivan44/keymaps/default/readme.md deleted file mode 100644 index 189a9c0ff8..0000000000 --- a/keyboards/minivan44/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for minivan44 \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/Makefile b/keyboards/minivan44/keymaps/xyverz/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/minivan44/keymaps/xyverz/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/config.h b/keyboards/minivan44/keymaps/xyverz/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/minivan44/keymaps/xyverz/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/minivan44/keymaps/xyverz/keymap.c b/keyboards/minivan44/keymaps/xyverz/keymap.c deleted file mode 100644 index f995da0e7e..0000000000 --- a/keyboards/minivan44/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,92 +0,0 @@ -#include "minivan44.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -#define _DV 0 -#define _QW 1 -#define _CM 2 -#define _L1 3 -#define _L2 4 - -// Macro name shortcuts -#define DVORAK M(_DV) -#define QWERTY M(_QW) -#define COLEMAK M(_CM) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_DV] = { /* 0: Dvorak */ - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, - {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT }, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } - }, - - [_QW] = { /* 1: Qwerty */ - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } - }, - - [_CM] = { /* 2: Colemak */ - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, - {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } - }, - - [_L1] = {/* 1: FN 1 */ - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, - {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, - {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, - {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ } - }, - - [_L2] = { /* 2: FN 2 */ - {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC }, - {_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT }, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, - {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ } - } - -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DV: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_DV); - } - break; - case _QW: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_QW); - } - break; - case _CM: - if (record->event.pressed) { - persistant_default_layer_set(1UL<<_CM); - } - break; - } - return MACRO_NONE; -}; - - diff --git a/keyboards/minivan44/keymaps/xyverz/readme.md b/keyboards/minivan44/keymaps/xyverz/readme.md deleted file mode 100644 index 189a9c0ff8..0000000000 --- a/keyboards/minivan44/keymaps/xyverz/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for minivan44 \ No newline at end of file diff --git a/keyboards/minivan44/minivan44.c b/keyboards/minivan44/minivan44.c deleted file mode 100644 index be8214fd5d..0000000000 --- a/keyboards/minivan44/minivan44.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "minivan44.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/minivan44/minivan44.h b/keyboards/minivan44/minivan44.h deleted file mode 100644 index c6119c2e16..0000000000 --- a/keyboards/minivan44/minivan44.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef MINIVAN44_H -#define MINIVAN44_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K32, K33, K37, K38, K39, K3B \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ - { K30, K31, K32, K33, KC_NO, KC_NO, KC_NO, K37, K38, K39, K3A, K3B } \ - -#endif diff --git a/keyboards/minivan44/readme.md b/keyboards/minivan44/readme.md deleted file mode 100644 index 59b62b0e66..0000000000 --- a/keyboards/minivan44/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -minivan44 keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/minivan44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` \ No newline at end of file -- cgit v1.2.3 From 97fca1efff37f749fae8d53bb5ee4da9f8a898c5 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Sat, 13 Aug 2016 20:14:27 -0700 Subject: Fixing a mixup. Tidying up the keymap. --- keyboards/atreus/keymaps/xyverz/keymap.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'keyboards') diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index 1ce92b4f22..b418cc9b5e 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -46,24 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_L1] = { /* LAYER 1 */ {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, -<<<<<<< HEAD {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, -======= - {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, ->>>>>>> upstream/master {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } }, [_L2] = { /* LAYER 2 */ {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, -<<<<<<< HEAD {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET} -======= - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, - {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11, KC_F12 }, - {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } ->>>>>>> upstream/master } }; -- cgit v1.2.3 From 049343e523857eef6fe03bfd5ec73d830639e0b6 Mon Sep 17 00:00:00 2001 From: Xyverz Date: Sun, 14 Aug 2016 00:33:11 -0700 Subject: Added my own layout to the Phantom. --- keyboards/phantom/keymaps/xyverz/keymap.c | 104 ++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 keyboards/phantom/keymaps/xyverz/keymap.c (limited to 'keyboards') diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..aa6af18b1d --- /dev/null +++ b/keyboards/phantom/keymaps/xyverz/keymap.c @@ -0,0 +1,104 @@ +#include "phantom.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _FL 3 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QW] = { /* Layer 0: Qwerty */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_DV] = { /* Layer 1: Dvorak */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_CM] = { /* Layer 2: Colemak */ + {KC_ESC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP, XXXXXXX}, + {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT} + }, + +[_FL] = { /* Layer 3: Functions */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET, KC_MPRV, KC_MPLY, KC_MNXT}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX}, + {_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX}, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______}, + }, + + +}; + +enum function_id { + SHIFT_ESC, +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; -- cgit v1.2.3 From 880486bd247b93800f9d007f0ba90d38d5397b41 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:46:40 +0200 Subject: Jack's keymap. --- keyboards/preonic/keymaps/jacwib/Makefile | 25 ++++ keyboards/preonic/keymaps/jacwib/config.h | 9 ++ keyboards/preonic/keymaps/jacwib/keymap.c | 215 +++++++++++++++++++++++++++++ keyboards/preonic/keymaps/jacwib/readme.md | 2 + 4 files changed, 251 insertions(+) create mode 100644 keyboards/preonic/keymaps/jacwib/Makefile create mode 100644 keyboards/preonic/keymaps/jacwib/config.h create mode 100644 keyboards/preonic/keymaps/jacwib/keymap.c create mode 100644 keyboards/preonic/keymaps/jacwib/readme.md (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile new file mode 100644 index 0000000000..1743c64878 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h new file mode 100644 index 0000000000..330686559f --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/config.h @@ -0,0 +1,9 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#define FORCE_NKRO 1 + +#endif diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c new file mode 100644 index 0000000000..1d5e0a7771 --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/keymap.c @@ -0,0 +1,215 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "keymap_nordic.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | + | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Å | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | Ö | Ä | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| < | Z | X | C | V | B | N | M | . | , | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |AltGr |Lower | Space| Enter|Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, KC_BSPC},//Done + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AM },//Done + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_AE, NO_OSLH},//Done + {KC_LSFT, NO_LESS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_COMM, NO_MINS},//Done + {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}//Done +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | @ | £ | $ | | | { | [ | ] | } | \ | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | |VolUp | | | ~ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | |LastS |PauseP|NextS | | * | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | |VolDwn| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | |Bspc | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},//Done + {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},//Done + {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},//Done + {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},//Done + {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}//Done +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ! | " | # | ¤ | % | & | / | ( | ) | = | ? | Ins | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Mouse^| | | | |ScrlUp| | | ^ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | |Mouse<|MouseV|Mouse>| | |MLC |MMC |MRC | ' | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | > | | | | | | |ScrlDown| : | ; | _ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | |Bspc | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL, NO_QUES, KC_INS},//Done + {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},//Done + {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},//Done + {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},//Done + {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}//Done +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | Reset| | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | |Rsft | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |MusOn |MusOff| | | | | | | | | Reset| + * |------+------+------+------+------+------+------+------+------+------+--,----+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},//Done + {_______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______},//Done + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},//Done + {_______, MU_ON, MU_OFF, _______, _______, _______, _______, _______, _______, _______, _______, RESET },//Done + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}//Done +} + + +}; + +#ifdef AUDIO_ENABLE //Mario theme song: E5 E5 E5 C5 E5 G5 G4 +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md new file mode 100644 index 0000000000..e81c62f76e --- /dev/null +++ b/keyboards/preonic/keymaps/jacwib/readme.md @@ -0,0 +1,2 @@ +# Jack's preonic keymap. +Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap. \ No newline at end of file -- cgit v1.2.3 From 1ab78110bd21b32a59eea46558ab4d83c5658cdb Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:48:22 +0200 Subject: Update readme.md --- keyboards/preonic/keymaps/jacwib/readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md index e81c62f76e..838af399cf 100644 --- a/keyboards/preonic/keymaps/jacwib/readme.md +++ b/keyboards/preonic/keymaps/jacwib/readme.md @@ -1,2 +1,2 @@ -# Jack's preonic keymap. -Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap. \ No newline at end of file +# Jacwib's preonic keymap. +Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap. -- cgit v1.2.3 From cf91aa416a6c32e2fa02d3ad31605ff1f24aab5e Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:48:52 +0200 Subject: Update keymap.c --- keyboards/preonic/keymaps/jacwib/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c index 1d5e0a7771..4ddaa962e1 100644 --- a/keyboards/preonic/keymaps/jacwib/keymap.c +++ b/keyboards/preonic/keymaps/jacwib/keymap.c @@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | |Rsft | * |------+------+------+------+------+------|------+------+------+------+------+------| * | |MusOn |MusOff| | | | | | | | | Reset| - * |------+------+------+------+------+------+------+------+------+------+--,----+------| + * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -- cgit v1.2.3 From 62004866b3eee07a39a6caa0f6f3a2df0d5b2ef5 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:49:06 +0200 Subject: Update config.h --- keyboards/preonic/keymaps/jacwib/config.h | 1 - 1 file changed, 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h index 330686559f..23e9e0ed28 100644 --- a/keyboards/preonic/keymaps/jacwib/config.h +++ b/keyboards/preonic/keymaps/jacwib/config.h @@ -3,7 +3,6 @@ #include "../../config.h" -// place overrides here #define FORCE_NKRO 1 #endif -- cgit v1.2.3 From 26f4a0cf04cc11690abc80f644b5fbdc869cf056 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:49:26 +0200 Subject: Update Makefile --- keyboards/preonic/keymaps/jacwib/Makefile | 5 ----- 1 file changed, 5 deletions(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile index 1743c64878..3e87d41d36 100644 --- a/keyboards/preonic/keymaps/jacwib/Makefile +++ b/keyboards/preonic/keymaps/jacwib/Makefile @@ -1,9 +1,5 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) @@ -17,7 +13,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR -- cgit v1.2.3 From e4e13ddc54d90b41a882c76a2d28f28763117763 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 10:57:47 +0200 Subject: Update readme.md --- keyboards/preonic/keymaps/jacwib/readme.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md index 838af399cf..0660312353 100644 --- a/keyboards/preonic/keymaps/jacwib/readme.md +++ b/keyboards/preonic/keymaps/jacwib/readme.md @@ -1,2 +1,3 @@ # Jacwib's preonic keymap. -Tries to feel like a normal keyboard, and is also designed for use with a swedish keymap. + +Designed for use with a swedish language. -- cgit v1.2.3 From 6ba27ea31883d52b3e023681edc344cc95e90317 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 11:02:46 +0200 Subject: Remove pointless comments --- keyboards/preonic/keymaps/jacwib/keymap.c | 42 +++++++++++++++---------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c index 4ddaa962e1..53604ef018 100644 --- a/keyboards/preonic/keymaps/jacwib/keymap.c +++ b/keyboards/preonic/keymaps/jacwib/keymap.c @@ -42,11 +42,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_QWERTY] = { - {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, KC_BSPC},//Done - {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AM },//Done - {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_AE, NO_OSLH},//Done - {KC_LSFT, NO_LESS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_COMM, NO_MINS},//Done - {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}//Done + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, KC_BSPC}, + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AM }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_AE, NO_OSLH}, + {KC_LSFT, NO_LESS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_DOT, KC_COMM, NO_MINS}, + {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Lower @@ -63,11 +63,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_LOWER] = { - {_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},//Done - {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},//Done - {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN},//Done - {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},//Done - {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}//Done + {_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD}, + {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN}, + {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______} }, /* Raise @@ -84,11 +84,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_RAISE] = { - {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL, NO_QUES, KC_INS},//Done - {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},//Done - {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},//Done - {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},//Done - {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}//Done + {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL, NO_QUES, KC_INS}, + {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC}, + {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT}, + {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS}, + {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______} }, /* Adjust (Lower + Raise) @@ -105,17 +105,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},//Done - {_______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______},//Done - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},//Done - {_______, MU_ON, MU_OFF, _______, _______, _______, _______, _______, _______, _______, _______, RESET },//Done - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}//Done + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT}, + {_______, MU_ON, MU_OFF, _______, _______, _______, _______, _______, _______, _______, _______, RESET }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } }; -#ifdef AUDIO_ENABLE //Mario theme song: E5 E5 E5 C5 E5 G5 G4 +#ifdef AUDIO_ENABLE float tone_startup[][2] = { {NOTE_B5, 20}, {NOTE_B6, 8}, -- cgit v1.2.3 From 54e37fd2d10f91b1b77cee263c1e3a2b3552cbd9 Mon Sep 17 00:00:00 2001 From: jacwib Date: Sun, 14 Aug 2016 11:08:01 +0200 Subject: Fix bug --- keyboards/preonic/keymaps/jacwib/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c index 53604ef018..cf441bf309 100644 --- a/keyboards/preonic/keymaps/jacwib/keymap.c +++ b/keyboards/preonic/keymaps/jacwib/keymap.c @@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = { {_______, NO_AT, NO_PND, NO_DLR, _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD}, - {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, NO_LPRN}, + {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)}, {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______} }, -- cgit v1.2.3 From 5705a403205c0c1e7c585e1a2edda21e79134ee6 Mon Sep 17 00:00:00 2001 From: Toni Date: Sun, 14 Aug 2016 20:06:47 +0200 Subject: increased readability with a defince --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 32 +++++++++++++---------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 9f838ba617..68cc6755e1 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -2,6 +2,7 @@ // this is the style you want to emulate. #include "satan.h" +// TODO: replace your ugly german brckets with #defines // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -12,6 +13,9 @@ #define _TAB 2 #define _SFX 3 +// increase readability +#define _______ KC_TRNS + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _DEF: Default Layer * ,-----------------------------------------------------------. @@ -48,10 +52,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_SPC] = KEYMAP_ISO_SPLITRSHIFT( KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS, LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), + _______, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), _______, _______, LSFT(KC_8), LSFT(KC_9), _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), _______, _______, _______, _______, _______, KC_VOLU, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) * ,-----------------------------------------------------------. @@ -67,11 +71,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_TAB] = KEYMAP_ISO_SPLITRSHIFT( - KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_7), RALT(KC_0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, RALT(KC_7), RALT(KC_0), _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) * ,-----------------------------------------------------------. @@ -87,11 +91,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_SFX] = KEYMAP_ISO_SPLITRSHIFT( - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \ - KC_TRNS, F(2), F(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \ - KC_TRNS, F(4), F(5), F(6), F(7), F(8), F(9), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT), + RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ + _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, KC_NO, KC_ENT, \ + _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, _______, KC_UP, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), }; enum function_id { -- cgit v1.2.3 From c6c2c3fc14736e4d226c5f410d8c3faf3d36629f Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 10:58:10 -1000 Subject: minorca minirca with RGB keymap --- keyboards/minorca/Makefile | 71 ++++++++++++++++++++++++ keyboards/minorca/config.h | 80 ++++++++++++++++++++++++++++ keyboards/minorca/keymaps/default/Makefile | 25 +++++++++ keyboards/minorca/keymaps/default/config.h | 12 +++++ keyboards/minorca/keymaps/default/keymap.c | 44 +++++++++++++++ keyboards/minorca/keymaps/default/readme.md | 5 ++ keyboards/minorca/keymaps/readme.md | 23 ++++++++ keyboards/minorca/keymaps/rgb/Makefile | 25 +++++++++ keyboards/minorca/keymaps/rgb/config.h | 20 +++++++ keyboards/minorca/keymaps/rgb/example.jpg | Bin 0 -> 72737 bytes keyboards/minorca/keymaps/rgb/keymap.c | 65 ++++++++++++++++++++++ keyboards/minorca/keymaps/rgb/readme.md | 23 ++++++++ keyboards/minorca/keymaps/rgb/wiring1.jpg | Bin 0 -> 119547 bytes keyboards/minorca/keymaps/rgb/wiring2.jpg | Bin 0 -> 94987 bytes keyboards/minorca/minorca.c | 6 +++ keyboards/minorca/minorca.h | 6 +++ keyboards/minorca/readme.md | 31 +++++++++++ 17 files changed, 436 insertions(+) create mode 100644 keyboards/minorca/Makefile create mode 100644 keyboards/minorca/config.h create mode 100644 keyboards/minorca/keymaps/default/Makefile create mode 100644 keyboards/minorca/keymaps/default/config.h create mode 100644 keyboards/minorca/keymaps/default/keymap.c create mode 100644 keyboards/minorca/keymaps/default/readme.md create mode 100644 keyboards/minorca/keymaps/readme.md create mode 100644 keyboards/minorca/keymaps/rgb/Makefile create mode 100644 keyboards/minorca/keymaps/rgb/config.h create mode 100644 keyboards/minorca/keymaps/rgb/example.jpg create mode 100644 keyboards/minorca/keymaps/rgb/keymap.c create mode 100644 keyboards/minorca/keymaps/rgb/readme.md create mode 100644 keyboards/minorca/keymaps/rgb/wiring1.jpg create mode 100644 keyboards/minorca/keymaps/rgb/wiring2.jpg create mode 100644 keyboards/minorca/minorca.c create mode 100644 keyboards/minorca/minorca.h create mode 100644 keyboards/minorca/readme.md (limited to 'keyboards') diff --git a/keyboards/minorca/Makefile b/keyboards/minorca/Makefile new file mode 100644 index 0000000000..8cff000493 --- /dev/null +++ b/keyboards/minorca/Makefile @@ -0,0 +1,71 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/minorca/config.h b/keyboards/minorca/config.h new file mode 100644 index 0000000000..4cdafcbd2e --- /dev/null +++ b/keyboards/minorca/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6660 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ME +#define PRODUCT MinOrca +#define DESCRIPTION Tiny Whale + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* MinOrca PCB default pin-out */ +#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } +#define MATRIX_ROW_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/minorca/keymaps/default/Makefile b/keyboards/minorca/keymaps/default/Makefile new file mode 100644 index 0000000000..8dc851fddf --- /dev/null +++ b/keyboards/minorca/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/minorca/keymaps/default/config.h b/keyboards/minorca/keymaps/default/config.h new file mode 100644 index 0000000000..bf40376c19 --- /dev/null +++ b/keyboards/minorca/keymaps/default/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +#endif diff --git a/keyboards/minorca/keymaps/default/keymap.c b/keyboards/minorca/keymaps/default/keymap.c new file mode 100644 index 0000000000..a55d578e44 --- /dev/null +++ b/keyboards/minorca/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Base */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_ENT }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_QUOT, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, KC_SPC, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_DOT, KC_SLSH, KC_NO } + }, + [1] = { /* First */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, + {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_PGDN, KC_END, KC_L, KC_SCLN, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, + [2] = { /* Second */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, + {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT }, + {KC_CAPS, XXXXXXX, KC_LSFT, KC_RSFT, KC_PAUSE,KC_F10, KC_F11, KC_F12, KC_NO, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to First overlay + [1] = ACTION_LAYER_MOMENTARY(2), // to Second overlay + +}; \ No newline at end of file diff --git a/keyboards/minorca/keymaps/default/readme.md b/keyboards/minorca/keymaps/default/readme.md new file mode 100644 index 0000000000..6ed31f82b3 --- /dev/null +++ b/keyboards/minorca/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The Default Minorca Layout + +Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c + +It looks incomplete. \ No newline at end of file diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md new file mode 100644 index 0000000000..54fb5f6d9e --- /dev/null +++ b/keyboards/minorca/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Planck keymaps + +* **default** default Planck layout +* **cbbrowne** cbbrowne's Planck layout \ No newline at end of file diff --git a/keyboards/minorca/keymaps/rgb/Makefile b/keyboards/minorca/keymaps/rgb/Makefile new file mode 100644 index 0000000000..230f75a628 --- /dev/null +++ b/keyboards/minorca/keymaps/rgb/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/minorca/keymaps/rgb/config.h b/keyboards/minorca/keymaps/rgb/config.h new file mode 100644 index 0000000000..deaac2e26f --- /dev/null +++ b/keyboards/minorca/keymaps/rgb/config.h @@ -0,0 +1,20 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D5 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 13 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/minorca/keymaps/rgb/example.jpg b/keyboards/minorca/keymaps/rgb/example.jpg new file mode 100644 index 0000000000..a04c8d37d6 Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/example.jpg differ diff --git a/keyboards/minorca/keymaps/rgb/keymap.c b/keyboards/minorca/keymaps/rgb/keymap.c new file mode 100644 index 0000000000..9002afbb88 --- /dev/null +++ b/keyboards/minorca/keymaps/rgb/keymap.c @@ -0,0 +1,65 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _TB 3 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {FUNC(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_QUOT}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, FUNC(1)}, + {KC_LCTL, XXXXXXX, KC_LGUI, KC_LALT, FUNC(2), XXXXXXX, XXXXXXX, FUNC(3), XXXXXXX, KC_RALT, KC_APP, KC_RCTL} +}, + +[_RAISE] = { + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUSE, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), XXXXXXX, S(KC_BSLS)}, + {KC_TRNS, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_MNXT, KC_MUTE, KC_MPLY} +}, + +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, XXXXXXX, KC_BSLS}, + {KC_TRNS, XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_HOME, KC_PGDN, KC_END} +}, + +[_TB] = { /* Tab */ + {KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, KC_TRNS}, + {KC_TRNS, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT}, + {BL_STEP, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_TB, KC_TAB), + [1] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [2] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), + [3] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), +}; diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md new file mode 100644 index 0000000000..50806068ce --- /dev/null +++ b/keyboards/minorca/keymaps/rgb/readme.md @@ -0,0 +1,23 @@ +#RGB backlight for MinOrca + +![wiring](example.jpg) + +Exmaple of adding WS2812b LEDs to a MinOrca. + +http://www.40percent.club/2016/08/tiny-whale.html + +The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. + +Tab + Z Toggle on/off +Tab + X Mode +Tab + C Hue+ +Tab + V Hue- +Tab + B Saturation+ +Tab + N Saturation- +Tab + M Brightness+ +Tab + , Brightness- + +Example wiring: + +![wiring](wiring1.jpg) +![wiring closeup](wiring2.jpg) diff --git a/keyboards/minorca/keymaps/rgb/wiring1.jpg b/keyboards/minorca/keymaps/rgb/wiring1.jpg new file mode 100644 index 0000000000..7dcbe80c5e Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/wiring1.jpg differ diff --git a/keyboards/minorca/keymaps/rgb/wiring2.jpg b/keyboards/minorca/keymaps/rgb/wiring2.jpg new file mode 100644 index 0000000000..fd91d3e1c9 Binary files /dev/null and b/keyboards/minorca/keymaps/rgb/wiring2.jpg differ diff --git a/keyboards/minorca/minorca.c b/keyboards/minorca/minorca.c new file mode 100644 index 0000000000..24e72c2a5c --- /dev/null +++ b/keyboards/minorca/minorca.c @@ -0,0 +1,6 @@ +#include "minorca.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} \ No newline at end of file diff --git a/keyboards/minorca/minorca.h b/keyboards/minorca/minorca.h new file mode 100644 index 0000000000..158e5b4c55 --- /dev/null +++ b/keyboards/minorca/minorca.h @@ -0,0 +1,6 @@ +#ifndef MINORCA_H +#define MINORCA_H + +#include "quantum.h" + +#endif diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md new file mode 100644 index 0000000000..1d655dfe48 --- /dev/null +++ b/keyboards/minorca/readme.md @@ -0,0 +1,31 @@ +minorca keyboard firmware +====================== +Handwired 40% keyboard + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|] +``` +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. + +### Notable forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) -- cgit v1.2.3 From dde9ee572cf01609aaebbc6cbe1f326e7f89b7f4 Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 11:06:46 -1000 Subject: clean up readnme --- keyboards/minorca/keymaps/rgb/readme.md | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'keyboards') diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md index 50806068ce..051ffe3c64 100644 --- a/keyboards/minorca/keymaps/rgb/readme.md +++ b/keyboards/minorca/keymaps/rgb/readme.md @@ -8,16 +8,18 @@ http://www.40percent.club/2016/08/tiny-whale.html The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. -Tab + Z Toggle on/off -Tab + X Mode -Tab + C Hue+ -Tab + V Hue- -Tab + B Saturation+ -Tab + N Saturation- -Tab + M Brightness+ -Tab + , Brightness- +*Tab + Z Toggle on/off +*Tab + X Mode +*Tab + C Hue+ +*Tab + V Hue- +*Tab + B Saturation+ +*Tab + N Saturation- +*Tab + M Brightness+ +*Tab + , Brightness- Example wiring: +WS2812 data pin is connected to D2 + ![wiring](wiring1.jpg) ![wiring closeup](wiring2.jpg) -- cgit v1.2.3 From 65060ad000930b4d735760cd8951ae0f462d5f14 Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 11:07:35 -1000 Subject: Fix list --- keyboards/minorca/keymaps/rgb/readme.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'keyboards') diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md index 051ffe3c64..00b6d6cd8c 100644 --- a/keyboards/minorca/keymaps/rgb/readme.md +++ b/keyboards/minorca/keymaps/rgb/readme.md @@ -2,20 +2,20 @@ ![wiring](example.jpg) -Exmaple of adding WS2812b LEDs to a MinOrca. +Example of adding WS2812b LEDs to a MinOrca. http://www.40percent.club/2016/08/tiny-whale.html The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. -*Tab + Z Toggle on/off -*Tab + X Mode -*Tab + C Hue+ -*Tab + V Hue- -*Tab + B Saturation+ -*Tab + N Saturation- -*Tab + M Brightness+ -*Tab + , Brightness- +* Tab + Z Toggle on/off +* Tab + X Mode +* Tab + C Hue+ +* Tab + V Hue- +* Tab + B Saturation+ +* Tab + N Saturation- +* Tab + M Brightness+ +* Tab + , Brightness- Example wiring: -- cgit v1.2.3 From 1eaa685872745d3ae01afb79bad8f25a4fd1029d Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 11:08:15 -1000 Subject: Correct data pin to D5 --- keyboards/minorca/keymaps/rgb/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md index 00b6d6cd8c..f50dfa546f 100644 --- a/keyboards/minorca/keymaps/rgb/readme.md +++ b/keyboards/minorca/keymaps/rgb/readme.md @@ -19,7 +19,7 @@ The keymap is a work in progress. The RGB functions are accessed by holding down Example wiring: -WS2812 data pin is connected to D2 +WS2812 data pin is connected to D5 ![wiring](wiring1.jpg) ![wiring closeup](wiring2.jpg) -- cgit v1.2.3 From f58a67c991fa15f6177ebb9ec74e831b851bb38e Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 11:10:12 -1000 Subject: cleanup readme --- keyboards/minorca/keymaps/readme.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards') diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md index 54fb5f6d9e..058923ba25 100644 --- a/keyboards/minorca/keymaps/readme.md +++ b/keyboards/minorca/keymaps/readme.md @@ -17,7 +17,7 @@ When adding your keymap to this list, keep it organised alphabetically (select l * **folder_name** description -# List of Planck keymaps +# List of Minorca keymaps -* **default** default Planck layout -* **cbbrowne** cbbrowne's Planck layout \ No newline at end of file +* **default** default Minorca layout +* **rgb** layout with WS2812b control -- cgit v1.2.3 From 503ec7f9f6f9c15049f02c3753afdfe2d0db629b Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 11:15:46 -1000 Subject: Updated readme Added link to Minorca/Sebright blog. --- keyboards/minorca/readme.md | 2 ++ 1 file changed, 2 insertions(+) (limited to 'keyboards') diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md index 1d655dfe48..93c767954d 100644 --- a/keyboards/minorca/readme.md +++ b/keyboards/minorca/readme.md @@ -2,6 +2,8 @@ minorca keyboard firmware ====================== Handwired 40% keyboard +http://www.panc.co/blog/minorcasebright-information-page + ## Quantum MK Firmware For the full Quantum feature list, see [the parent readme.md](/readme.md). -- cgit v1.2.3 From 959c48e146ec3c2192e8d261d78d27b80342ad30 Mon Sep 17 00:00:00 2001 From: di0ib Date: Sun, 14 Aug 2016 14:13:58 -1000 Subject: moved to handwired folder --- keyboards/handwired/minorca/Makefile | 71 ++++++++++++++++++ keyboards/handwired/minorca/config.h | 80 +++++++++++++++++++++ .../handwired/minorca/keymaps/default/Makefile | 25 +++++++ .../handwired/minorca/keymaps/default/config.h | 12 ++++ .../handwired/minorca/keymaps/default/keymap.c | 44 ++++++++++++ .../handwired/minorca/keymaps/default/readme.md | 5 ++ keyboards/handwired/minorca/keymaps/readme.md | 23 ++++++ keyboards/handwired/minorca/keymaps/rgb/Makefile | 25 +++++++ keyboards/handwired/minorca/keymaps/rgb/config.h | 20 ++++++ .../handwired/minorca/keymaps/rgb/example.jpg | Bin 0 -> 72737 bytes keyboards/handwired/minorca/keymaps/rgb/keymap.c | 65 +++++++++++++++++ keyboards/handwired/minorca/keymaps/rgb/readme.md | 25 +++++++ .../handwired/minorca/keymaps/rgb/wiring1.jpg | Bin 0 -> 119547 bytes .../handwired/minorca/keymaps/rgb/wiring2.jpg | Bin 0 -> 94987 bytes keyboards/handwired/minorca/minorca.c | 6 ++ keyboards/handwired/minorca/minorca.h | 6 ++ keyboards/handwired/minorca/readme.md | 33 +++++++++ keyboards/minorca/Makefile | 71 ------------------ keyboards/minorca/config.h | 80 --------------------- keyboards/minorca/keymaps/default/Makefile | 25 ------- keyboards/minorca/keymaps/default/config.h | 12 ---- keyboards/minorca/keymaps/default/keymap.c | 44 ------------ keyboards/minorca/keymaps/default/readme.md | 5 -- keyboards/minorca/keymaps/readme.md | 23 ------ keyboards/minorca/keymaps/rgb/Makefile | 25 ------- keyboards/minorca/keymaps/rgb/config.h | 20 ------ keyboards/minorca/keymaps/rgb/example.jpg | Bin 72737 -> 0 bytes keyboards/minorca/keymaps/rgb/keymap.c | 65 ----------------- keyboards/minorca/keymaps/rgb/readme.md | 25 ------- keyboards/minorca/keymaps/rgb/wiring1.jpg | Bin 119547 -> 0 bytes keyboards/minorca/keymaps/rgb/wiring2.jpg | Bin 94987 -> 0 bytes keyboards/minorca/minorca.c | 6 -- keyboards/minorca/minorca.h | 6 -- keyboards/minorca/readme.md | 33 --------- 34 files changed, 440 insertions(+), 440 deletions(-) create mode 100644 keyboards/handwired/minorca/Makefile create mode 100644 keyboards/handwired/minorca/config.h create mode 100644 keyboards/handwired/minorca/keymaps/default/Makefile create mode 100644 keyboards/handwired/minorca/keymaps/default/config.h create mode 100644 keyboards/handwired/minorca/keymaps/default/keymap.c create mode 100644 keyboards/handwired/minorca/keymaps/default/readme.md create mode 100644 keyboards/handwired/minorca/keymaps/readme.md create mode 100644 keyboards/handwired/minorca/keymaps/rgb/Makefile create mode 100644 keyboards/handwired/minorca/keymaps/rgb/config.h create mode 100644 keyboards/handwired/minorca/keymaps/rgb/example.jpg create mode 100644 keyboards/handwired/minorca/keymaps/rgb/keymap.c create mode 100644 keyboards/handwired/minorca/keymaps/rgb/readme.md create mode 100644 keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg create mode 100644 keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg create mode 100644 keyboards/handwired/minorca/minorca.c create mode 100644 keyboards/handwired/minorca/minorca.h create mode 100644 keyboards/handwired/minorca/readme.md delete mode 100644 keyboards/minorca/Makefile delete mode 100644 keyboards/minorca/config.h delete mode 100644 keyboards/minorca/keymaps/default/Makefile delete mode 100644 keyboards/minorca/keymaps/default/config.h delete mode 100644 keyboards/minorca/keymaps/default/keymap.c delete mode 100644 keyboards/minorca/keymaps/default/readme.md delete mode 100644 keyboards/minorca/keymaps/readme.md delete mode 100644 keyboards/minorca/keymaps/rgb/Makefile delete mode 100644 keyboards/minorca/keymaps/rgb/config.h delete mode 100644 keyboards/minorca/keymaps/rgb/example.jpg delete mode 100644 keyboards/minorca/keymaps/rgb/keymap.c delete mode 100644 keyboards/minorca/keymaps/rgb/readme.md delete mode 100644 keyboards/minorca/keymaps/rgb/wiring1.jpg delete mode 100644 keyboards/minorca/keymaps/rgb/wiring2.jpg delete mode 100644 keyboards/minorca/minorca.c delete mode 100644 keyboards/minorca/minorca.h delete mode 100644 keyboards/minorca/readme.md (limited to 'keyboards') diff --git a/keyboards/handwired/minorca/Makefile b/keyboards/handwired/minorca/Makefile new file mode 100644 index 0000000000..155c1f9a29 --- /dev/null +++ b/keyboards/handwired/minorca/Makefile @@ -0,0 +1,71 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h new file mode 100644 index 0000000000..4cdafcbd2e --- /dev/null +++ b/keyboards/handwired/minorca/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6660 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ME +#define PRODUCT MinOrca +#define DESCRIPTION Tiny Whale + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* MinOrca PCB default pin-out */ +#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } +#define MATRIX_ROW_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/minorca/keymaps/default/Makefile b/keyboards/handwired/minorca/keymaps/default/Makefile new file mode 100644 index 0000000000..a573488a5e --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/minorca/keymaps/default/config.h b/keyboards/handwired/minorca/keymaps/default/config.h new file mode 100644 index 0000000000..bf40376c19 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +#endif diff --git a/keyboards/handwired/minorca/keymaps/default/keymap.c b/keyboards/handwired/minorca/keymaps/default/keymap.c new file mode 100644 index 0000000000..a55d578e44 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Base */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_ENT }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_QUOT, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, KC_SPC, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_DOT, KC_SLSH, KC_NO } + }, + [1] = { /* First */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, + {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI }, + {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_PGDN, KC_END, KC_L, KC_SCLN, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, + [2] = { /* Second */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, + {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT }, + {KC_CAPS, XXXXXXX, KC_LSFT, KC_RSFT, KC_PAUSE,KC_F10, KC_F11, KC_F12, KC_NO, KC_UP, KC_FN1, KC_FN0 }, + {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to First overlay + [1] = ACTION_LAYER_MOMENTARY(2), // to Second overlay + +}; \ No newline at end of file diff --git a/keyboards/handwired/minorca/keymaps/default/readme.md b/keyboards/handwired/minorca/keymaps/default/readme.md new file mode 100644 index 0000000000..6ed31f82b3 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The Default Minorca Layout + +Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c + +It looks incomplete. \ No newline at end of file diff --git a/keyboards/handwired/minorca/keymaps/readme.md b/keyboards/handwired/minorca/keymaps/readme.md new file mode 100644 index 0000000000..058923ba25 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Minorca keymaps + +* **default** default Minorca layout +* **rgb** layout with WS2812b control diff --git a/keyboards/handwired/minorca/keymaps/rgb/Makefile b/keyboards/handwired/minorca/keymaps/rgb/Makefile new file mode 100644 index 0000000000..2b2af13358 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h new file mode 100644 index 0000000000..deaac2e26f --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -0,0 +1,20 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D5 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 13 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/handwired/minorca/keymaps/rgb/example.jpg b/keyboards/handwired/minorca/keymaps/rgb/example.jpg new file mode 100644 index 0000000000..a04c8d37d6 Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/example.jpg differ diff --git a/keyboards/handwired/minorca/keymaps/rgb/keymap.c b/keyboards/handwired/minorca/keymaps/rgb/keymap.c new file mode 100644 index 0000000000..9002afbb88 --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/keymap.c @@ -0,0 +1,65 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "minorca.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _TB 3 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {FUNC(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_QUOT}, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, FUNC(1)}, + {KC_LCTL, XXXXXXX, KC_LGUI, KC_LALT, FUNC(2), XXXXXXX, XXXXXXX, FUNC(3), XXXXXXX, KC_RALT, KC_APP, KC_RCTL} +}, + +[_RAISE] = { + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUSE, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), XXXXXXX, S(KC_BSLS)}, + {KC_TRNS, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_MNXT, KC_MUTE, KC_MPLY} +}, + +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, XXXXXXX, KC_BSLS}, + {KC_TRNS, XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT}, + {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_HOME, KC_PGDN, KC_END} +}, + +[_TB] = { /* Tab */ + {KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, KC_TRNS}, + {KC_TRNS, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT}, + {BL_STEP, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_TB, KC_TAB), + [1] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [2] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), + [3] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), +}; diff --git a/keyboards/handwired/minorca/keymaps/rgb/readme.md b/keyboards/handwired/minorca/keymaps/rgb/readme.md new file mode 100644 index 0000000000..f50dfa546f --- /dev/null +++ b/keyboards/handwired/minorca/keymaps/rgb/readme.md @@ -0,0 +1,25 @@ +#RGB backlight for MinOrca + +![wiring](example.jpg) + +Example of adding WS2812b LEDs to a MinOrca. + +http://www.40percent.club/2016/08/tiny-whale.html + +The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. + +* Tab + Z Toggle on/off +* Tab + X Mode +* Tab + C Hue+ +* Tab + V Hue- +* Tab + B Saturation+ +* Tab + N Saturation- +* Tab + M Brightness+ +* Tab + , Brightness- + +Example wiring: + +WS2812 data pin is connected to D5 + +![wiring](wiring1.jpg) +![wiring closeup](wiring2.jpg) diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg new file mode 100644 index 0000000000..7dcbe80c5e Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/wiring1.jpg differ diff --git a/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg new file mode 100644 index 0000000000..fd91d3e1c9 Binary files /dev/null and b/keyboards/handwired/minorca/keymaps/rgb/wiring2.jpg differ diff --git a/keyboards/handwired/minorca/minorca.c b/keyboards/handwired/minorca/minorca.c new file mode 100644 index 0000000000..24e72c2a5c --- /dev/null +++ b/keyboards/handwired/minorca/minorca.c @@ -0,0 +1,6 @@ +#include "minorca.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} \ No newline at end of file diff --git a/keyboards/handwired/minorca/minorca.h b/keyboards/handwired/minorca/minorca.h new file mode 100644 index 0000000000..158e5b4c55 --- /dev/null +++ b/keyboards/handwired/minorca/minorca.h @@ -0,0 +1,6 @@ +#ifndef MINORCA_H +#define MINORCA_H + +#include "quantum.h" + +#endif diff --git a/keyboards/handwired/minorca/readme.md b/keyboards/handwired/minorca/readme.md new file mode 100644 index 0000000000..93c767954d --- /dev/null +++ b/keyboards/handwired/minorca/readme.md @@ -0,0 +1,33 @@ +minorca keyboard firmware +====================== +Handwired 40% keyboard + +http://www.panc.co/blog/minorcasebright-information-page + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|] +``` +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. + +### Notable forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) diff --git a/keyboards/minorca/Makefile b/keyboards/minorca/Makefile deleted file mode 100644 index 8cff000493..0000000000 --- a/keyboards/minorca/Makefile +++ /dev/null @@ -1,71 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../Makefile -endif \ No newline at end of file diff --git a/keyboards/minorca/config.h b/keyboards/minorca/config.h deleted file mode 100644 index 4cdafcbd2e..0000000000 --- a/keyboards/minorca/config.h +++ /dev/null @@ -1,80 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6660 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ME -#define PRODUCT MinOrca -#define DESCRIPTION Tiny Whale - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* MinOrca PCB default pin-out */ -#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } -#define MATRIX_ROW_PINS { B0, B1, B2, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/minorca/keymaps/default/Makefile b/keyboards/minorca/keymaps/default/Makefile deleted file mode 100644 index 8dc851fddf..0000000000 --- a/keyboards/minorca/keymaps/default/Makefile +++ /dev/null @@ -1,25 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/minorca/keymaps/default/config.h b/keyboards/minorca/keymaps/default/config.h deleted file mode 100644 index bf40376c19..0000000000 --- a/keyboards/minorca/keymaps/default/config.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -/* bootmagic salt key */ -#define BOOTMAGIC_KEY_SALT KC_ESC - -/* skip bootmagic and eeconfig */ -#define BOOTMAGIC_KEY_SKIP KC_SPACE - -#endif diff --git a/keyboards/minorca/keymaps/default/keymap.c b/keyboards/minorca/keymaps/default/keymap.c deleted file mode 100644 index a55d578e44..0000000000 --- a/keyboards/minorca/keymaps/default/keymap.c +++ /dev/null @@ -1,44 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "minorca.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = { /* Base */ - {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_ENT }, - {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_QUOT, KC_FN1, KC_FN0 }, - {KC_NO, XXXXXXX, KC_NO, KC_LALT, KC_SPC, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_DOT, KC_SLSH, KC_NO } - }, - [1] = { /* First */ - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, - {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, KC_LGUI }, - {KC_LCTRL,XXXXXXX, KC_Z, KC_X, KC_C, KC_PGDN, KC_END, KC_L, KC_SCLN, KC_UP, KC_FN1, KC_FN0 }, - {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } - }, - [2] = { /* Second */ - {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, - {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, KC_ENT }, - {KC_CAPS, XXXXXXX, KC_LSFT, KC_RSFT, KC_PAUSE,KC_F10, KC_F11, KC_F12, KC_NO, KC_UP, KC_FN1, KC_FN0 }, - {KC_NO, XXXXXXX, KC_NO, KC_LALT, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_DOWN, KC_RIGHT,KC_NO } - }, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to First overlay - [1] = ACTION_LAYER_MOMENTARY(2), // to Second overlay - -}; \ No newline at end of file diff --git a/keyboards/minorca/keymaps/default/readme.md b/keyboards/minorca/keymaps/default/readme.md deleted file mode 100644 index 6ed31f82b3..0000000000 --- a/keyboards/minorca/keymaps/default/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# The Default Minorca Layout - -Copied from https://github.com/pancinteractive/qmk_firmware/blob/master/keyboard/minorca_mkV/keymaps/default/keymap.c - -It looks incomplete. \ No newline at end of file diff --git a/keyboards/minorca/keymaps/readme.md b/keyboards/minorca/keymaps/readme.md deleted file mode 100644 index 058923ba25..0000000000 --- a/keyboards/minorca/keymaps/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# How to add your own keymap - -Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: - - _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] - -\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements - -and contain the following files: - -* `keymap.c` -* `readme.md` *recommended* -* `config.h` *optional*, found automatically when compiling -* `Makefile` *optional*, found automatically when compling - -When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: - - * **folder_name** description - -# List of Minorca keymaps - -* **default** default Minorca layout -* **rgb** layout with WS2812b control diff --git a/keyboards/minorca/keymaps/rgb/Makefile b/keyboards/minorca/keymaps/rgb/Makefile deleted file mode 100644 index 230f75a628..0000000000 --- a/keyboards/minorca/keymaps/rgb/Makefile +++ /dev/null @@ -1,25 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/minorca/keymaps/rgb/config.h b/keyboards/minorca/keymaps/rgb/config.h deleted file mode 100644 index deaac2e26f..0000000000 --- a/keyboards/minorca/keymaps/rgb/config.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -/* bootmagic salt key */ -#define BOOTMAGIC_KEY_SALT KC_ESC - -/* skip bootmagic and eeconfig */ -#define BOOTMAGIC_KEY_SKIP KC_SPACE - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D5 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 13 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#endif diff --git a/keyboards/minorca/keymaps/rgb/example.jpg b/keyboards/minorca/keymaps/rgb/example.jpg deleted file mode 100644 index a04c8d37d6..0000000000 Binary files a/keyboards/minorca/keymaps/rgb/example.jpg and /dev/null differ diff --git a/keyboards/minorca/keymaps/rgb/keymap.c b/keyboards/minorca/keymaps/rgb/keymap.c deleted file mode 100644 index 9002afbb88..0000000000 --- a/keyboards/minorca/keymaps/rgb/keymap.c +++ /dev/null @@ -1,65 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "minorca.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _TB 3 - -// Macro name shortcuts -#define QWERTY M(_QWERTY) -#define LOWER M(_LOWER) -#define RAISE M(_RAISE) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[_QWERTY] = { /* Qwerty */ - {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {FUNC(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, XXXXXXX, KC_QUOT}, - {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, FUNC(1)}, - {KC_LCTL, XXXXXXX, KC_LGUI, KC_LALT, FUNC(2), XXXXXXX, XXXXXXX, FUNC(3), XXXXXXX, KC_RALT, KC_APP, KC_RCTL} -}, - -[_RAISE] = { - {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUSE, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), XXXXXXX, S(KC_BSLS)}, - {KC_TRNS, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT}, - {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_MNXT, KC_MUTE, KC_MPLY} -}, - -[_LOWER] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, XXXXXXX, KC_BSLS}, - {KC_TRNS, XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT}, - {KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_HOME, KC_PGDN, KC_END} -}, - -[_TB] = { /* Tab */ - {KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, KC_TRNS}, - {KC_TRNS, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT}, - {BL_STEP, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT} -} -}; - - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_KEY(_TB, KC_TAB), - [1] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), - [2] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), - [3] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), -}; diff --git a/keyboards/minorca/keymaps/rgb/readme.md b/keyboards/minorca/keymaps/rgb/readme.md deleted file mode 100644 index f50dfa546f..0000000000 --- a/keyboards/minorca/keymaps/rgb/readme.md +++ /dev/null @@ -1,25 +0,0 @@ -#RGB backlight for MinOrca - -![wiring](example.jpg) - -Example of adding WS2812b LEDs to a MinOrca. - -http://www.40percent.club/2016/08/tiny-whale.html - -The keymap is a work in progress. The RGB functions are accessed by holding down the TAB key. - -* Tab + Z Toggle on/off -* Tab + X Mode -* Tab + C Hue+ -* Tab + V Hue- -* Tab + B Saturation+ -* Tab + N Saturation- -* Tab + M Brightness+ -* Tab + , Brightness- - -Example wiring: - -WS2812 data pin is connected to D5 - -![wiring](wiring1.jpg) -![wiring closeup](wiring2.jpg) diff --git a/keyboards/minorca/keymaps/rgb/wiring1.jpg b/keyboards/minorca/keymaps/rgb/wiring1.jpg deleted file mode 100644 index 7dcbe80c5e..0000000000 Binary files a/keyboards/minorca/keymaps/rgb/wiring1.jpg and /dev/null differ diff --git a/keyboards/minorca/keymaps/rgb/wiring2.jpg b/keyboards/minorca/keymaps/rgb/wiring2.jpg deleted file mode 100644 index fd91d3e1c9..0000000000 Binary files a/keyboards/minorca/keymaps/rgb/wiring2.jpg and /dev/null differ diff --git a/keyboards/minorca/minorca.c b/keyboards/minorca/minorca.c deleted file mode 100644 index 24e72c2a5c..0000000000 --- a/keyboards/minorca/minorca.c +++ /dev/null @@ -1,6 +0,0 @@ -#include "minorca.h" - -void matrix_init_kb(void) { - - matrix_init_user(); -} \ No newline at end of file diff --git a/keyboards/minorca/minorca.h b/keyboards/minorca/minorca.h deleted file mode 100644 index 158e5b4c55..0000000000 --- a/keyboards/minorca/minorca.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef MINORCA_H -#define MINORCA_H - -#include "quantum.h" - -#endif diff --git a/keyboards/minorca/readme.md b/keyboards/minorca/readme.md deleted file mode 100644 index 93c767954d..0000000000 --- a/keyboards/minorca/readme.md +++ /dev/null @@ -1,33 +0,0 @@ -minorca keyboard firmware -====================== -Handwired 40% keyboard - -http://www.panc.co/blog/minorcasebright-information-page - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: -``` -$ make KEYMAP=[default|jack|] -``` -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. - -### Notable forks (which some of the keymap files are from) -- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) -- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) -- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) -- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) -- cgit v1.2.3 From f89aec98aebc3831e4c51acd5990b2025efc7758 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 20:32:45 +0200 Subject: removed my personal stuff --- keyboards/satan/keymaps/iso_split_rshift/.gitignore | 3 +++ keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh | 4 ---- 2 files changed, 3 insertions(+), 4 deletions(-) create mode 100644 keyboards/satan/keymaps/iso_split_rshift/.gitignore delete mode 100755 keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/.gitignore b/keyboards/satan/keymaps/iso_split_rshift/.gitignore new file mode 100644 index 0000000000..4d652661c6 --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/.gitignore @@ -0,0 +1,3 @@ +updatemerge.sh +clear_flash.hex +resetboard.sh diff --git a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh deleted file mode 100755 index d17ec76ecd..0000000000 --- a/keyboards/satan/keymaps/iso_split_rshift/updatemerge.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash -git checkout iso_split_rshift # gets you "on branch dmgr2" -git fetch origin # gets you up to date with origin -git merge origin/master -- cgit v1.2.3 From ca4968bc44c39eb50752a289224568e27fce8281 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 20:46:38 +0200 Subject: readme.md added --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 keyboards/satan/keymaps/iso_split_rshift/readme.md (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md new file mode 100644 index 0000000000..25ef62b57c --- /dev/null +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -0,0 +1,16 @@ +toneman77's Satan Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* heavily modified ISO (!) layout with split right shift key +* spaceFn +* Dual-Role keys: +* Lockable layer for LED functions and numpad +* WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega) + + +### Additional Credits +Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) + -- cgit v1.2.3 From 77f3efbef6cc19ffd1b0b4cd3813285a18031de1 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 20:59:50 +0200 Subject: more information. first steps in markdown --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 25ef62b57c..411dbce32c 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -7,10 +7,24 @@ For the full Quantum feature list, see the parent readme.md. * heavily modified ISO (!) layout with split right shift key * spaceFn * Dual-Role keys: + | Original key | when tapped | when held | + | ---------------- | ------------- | ------------- | + | Space | Space | layer change | + | Caps lock | Escape | Control | + | Tab | Tab | layer change | + | Enter | Enter | Control | * Lockable layer for LED functions and numpad +* vim-style arrow keys on hjkl (spacefn layer) +* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) +* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift +* more bonus arrow keys on wasd (spacefn layer) +* media keys prev/next/play/vol+/vol- (spacefn layer) +* formware bootloader button * WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega) +* additional brackets that only work in german layout due to horrible placement +in the default qwertz layout ### Additional Credits Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) - +ce visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) -- cgit v1.2.3 From 5cf5e27dcd908ca538208292491e11cd00e38c57 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:02:07 +0200 Subject: Update readme.md attempt to prettify the table --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 ++ 1 file changed, 2 insertions(+) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 411dbce32c..862b44eb1c 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -7,12 +7,14 @@ For the full Quantum feature list, see the parent readme.md. * heavily modified ISO (!) layout with split right shift key * spaceFn * Dual-Role keys: +* | Original key | when tapped | when held | | ---------------- | ------------- | ------------- | | Space | Space | layer change | | Caps lock | Escape | Control | | Tab | Tab | layer change | | Enter | Enter | Control | + * Lockable layer for LED functions and numpad * vim-style arrow keys on hjkl (spacefn layer) * corresponding Home/PgDn/PgUp/End on hjkl (tab layer) -- cgit v1.2.3 From 14de76ea8079321ab97f0f187d6f598886171540 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:02:40 +0200 Subject: Update readme.md typo --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 862b44eb1c..65dd26bbef 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -29,4 +29,4 @@ in the default qwertz layout ### Additional Credits Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) -ce visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) +nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) -- cgit v1.2.3 From 94ff9c9fa54749ebcf6eb06f9c1b27076c7e23b4 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:04:11 +0200 Subject: more prettyness --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 65dd26bbef..53db781881 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -28,5 +28,5 @@ in the default qwertz layout ### Additional Credits -Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) -nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) +* Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) +* nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) -- cgit v1.2.3 From 396b59f256d8cbf77d359a2b9677f9f7b1d0a021 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:12:49 +0200 Subject: readme now with picture --- .../satan/keymaps/iso_split_rshift/LEDpinSatan.jpg | Bin 0 -> 793980 bytes keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 ++ 2 files changed, 2 insertions(+) create mode 100644 keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg new file mode 100644 index 0000000000..7616693f9d Binary files /dev/null and b/keyboards/satan/keymaps/iso_split_rshift/LEDpinSatan.jpg differ diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 53db781881..c08cddba23 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -30,3 +30,5 @@ in the default qwertz layout ### Additional Credits * Keymap has been based on TerryMathews' fork of Aqoush's fork of qmk-satan-rgb. [here](https://github.com/TerryMathews/qmk-satan-rgb/tree/master/keyboard/satan) * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) +* no-need-to-solder-on-chip picture: +![no need to solder directly on the chip anymore](LEDpinSatan.jpg) -- cgit v1.2.3 From b8cbf7c9c0766b1f51373368bc3644b2c48c598f Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:18:25 +0200 Subject: script now waits for the user to press the button --- keyboards/satan/keymaps/iso_split_rshift/build.sh | 28 +++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh index 9523f6716f..6b4b4568f5 100755 --- a/keyboards/satan/keymaps/iso_split_rshift/build.sh +++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh @@ -1,16 +1,40 @@ #!/bin/bash # adjust for cpu # -j 16 gave best result on a hyperthreaded quad core core i7 + +LIMIT=10 THREADS="-j 16" KMAP=iso_split_rshift + echo "We need sudo later" sudo ls 2>&1 /dev/null + +function wait_bootloader { + echo "Waiting for Bootloader..." + local STARTTIME=$(date +"%s") + local REMIND=0 + local EXEC=dfu-programmer + local TARGET=atmega32u4 + while true + do + sudo $EXEC $TARGET get > /dev/null 2>&1 + [ $? -eq 0 ] && break + ENDTIME=$(date +"%s") + DURATION=$(($ENDTIME-$STARTTIME)) + if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] + then + echo "Did you forget to press the reset button?" + REMIND=1 + fi + sleep 1 + done +} make clean make KEYMAP=${KMAP} ${THREADS} if [[ $? -eq 0 ]] then - echo "please trigger flashing! you have 5 seconds" - sleep 5 + echo "please trigger flashing!" + wait_bootloader sudo make KEYMAP=${KMAP} dfu ${THREADS} else echo "make failed" -- cgit v1.2.3 From 7e1be3ae7c5b1839ce03fcedcc180e19836d3200 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:44:20 +0200 Subject: reference to reddit post and Terry Mathews --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 ++ 1 file changed, 2 insertions(+) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index c08cddba23..1eec0e13eb 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -32,3 +32,5 @@ in the default qwertz layout * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) * no-need-to-solder-on-chip picture: ![no need to solder directly on the chip anymore](LEDpinSatan.jpg) +* special thanks to /u/TerryMathews who suggested the pin PB2 so soldering +directly on the atmega is not needed anymore [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) -- cgit v1.2.3 From 68005ce60232c487a6b2ff78925c070881c240b5 Mon Sep 17 00:00:00 2001 From: Toni Date: Mon, 15 Aug 2016 21:47:07 +0200 Subject: grammar --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 1eec0e13eb..116ae9160a 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -33,4 +33,4 @@ in the default qwertz layout * no-need-to-solder-on-chip picture: ![no need to solder directly on the chip anymore](LEDpinSatan.jpg) * special thanks to /u/TerryMathews who suggested the pin PB2 so soldering -directly on the atmega is not needed anymore [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) +directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) -- cgit v1.2.3 From f5ed3e5155474e1fefee41374dc8b09ed114a67e Mon Sep 17 00:00:00 2001 From: Matt <7395051@gmail.com> Date: Mon, 15 Aug 2016 17:26:01 -0500 Subject: Added my custom Planck layout called Circuit. * Layout has image and readme, as well as documentation in the code. --- keyboards/planck/keymaps/circuit/Makefile | 25 ++ keyboards/planck/keymaps/circuit/Readme.md | 44 ++++ keyboards/planck/keymaps/circuit/config.h | 91 ++++++++ .../planck/keymaps/circuit/keyboard-layout.png | Bin 0 -> 154368 bytes keyboards/planck/keymaps/circuit/keymap.c | 258 +++++++++++++++++++++ 5 files changed, 418 insertions(+) create mode 100644 keyboards/planck/keymaps/circuit/Makefile create mode 100644 keyboards/planck/keymaps/circuit/Readme.md create mode 100644 keyboards/planck/keymaps/circuit/config.h create mode 100644 keyboards/planck/keymaps/circuit/keyboard-layout.png create mode 100644 keyboards/planck/keymaps/circuit/keymap.c (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/circuit/Makefile b/keyboards/planck/keymaps/circuit/Makefile new file mode 100644 index 0000000000..1ed0ff9568 --- /dev/null +++ b/keyboards/planck/keymaps/circuit/Makefile @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +TAP_DANCE_ENABLE = yes # Enables the double-tap functionality of keys + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/circuit/Readme.md b/keyboards/planck/keymaps/circuit/Readme.md new file mode 100644 index 0000000000..cbdf5de4e5 --- /dev/null +++ b/keyboards/planck/keymaps/circuit/Readme.md @@ -0,0 +1,44 @@ +##Design goals: +1. Arrow keys always available. +2. As close to a to my US layout 107-key QWERTY keyboard as I could manage, (i.e. as few arbitrary decisions as possible). +3. Togglable DVORAK keyboard. +4. most frequently used things in the easiest to reach places. +5. Ability to game on it, just for fun. + +My layout differs from most in the placement the ARROW keys, `ESC`, VOL keys, use of double-tap `CAPS`, and the GAME LOCK function. + +I put the layer buttons in the usual spots. I originally wanted only function/symbols layer, but that proved detrimental. I use some timed press actions to save some space, but this has been accounted for, (see GAME LOCK below). I'm not fully satisfied with the current product (see NOTES below), so it may change in the future. + +##Effective layers: +* Default later is obviously your letters and modifiers. +* Lower layer [NUMBER] is your numbers and punctuation. +* Upper layer [ACTION] is your symbols and actions. +* Function layer is the infrequently used function keys, layout toggle, game lock, and reset. + +There is also a toggle for the DVORAK/QWERTY layers, but in normal typing this is not of concern. + +###Special keys: +* `RSHFT` and `ENTER` are combined. Tap once for `ENTER` and hold for `RSHFT`. `ENTER` will be registered on release if released within 200 ms, else `RSHFT` is registered starting at 201 ms until release. +* If for some reason, this interferes with the normal usage of the `ENTER` key in any way, (some problem that may never happen), I have added a regular non-modified `ENTER` key on the same key in the [ACTION] layer. +* `LSHFT` and `CAPS` are also combined. The key works like a normal `LSHFT` unless double-tapped, in which case it counts as `CAPS`. This functionality unfortunately delays all key presses by at most 200 ms, but I have added ways to disable this both temporarily or permanently, described below. +* A failsafe `CAPS` key is on the same key in the [ACTION] layer. +* There are `UNDO`, `CUT`, `COPY`, and `PASTE` keys. This was intended to be a universal way to use these commands since in macOS cut is `⌘ + C` but in Windows it is `⌃ + C`. Unfortunately these special keys only work in Windows. ¯\\\_(ツ)\_/¯ + +##Game lock: +**TL;DR** the game lock toggle disables the double-tap `CAPS`, and disables `GUI` keys (WINDOWS key). + +I wished for this keyboard to be fully usable in the most demanding of games. The most demanding game I know of is ARMA 3 which has a binding to practically every individual key of a 107-key keyboard. This means I need to have pretty much every key possible somewhere. I also wanted the keyboard to be responsive in games for every critical keypress. This means having a way to disable features that introduce an inherent delay to registering keys, such as double-tap. + +I do not expect to see this used by the pros, but I enjoyed making it. As for use in ARMA 3, I got a little ways into the APEX campaign, but I found a few flaws. For Example, I cannot enable my HUD GPS since that requires `RCTRL`+`M` but `RCTRL` is not bound. The obvious fix is to rebind the action to a new key, but I still take this as a shortcoming of my layout. + +###If you wish to disable double-tap +####Disable it temporarily +Turn on the game lock. While on, it registers as normal `LSHFT` and has no delay. Whether in game mode or not, `CAPS` is on the same key in the [ACTION] layer. + +####Disable it permanently +Open the `Makefile` and set `TAP_DANCE_ENABLE = no`. I wrote the layout to compensate for this change, and no further changes to the code should be necessary. Whether or not it's disabled, `CAPS` is on the same key in the [ACTION] layer. + +##Notes: +* `ALT` and `GUI` are reversed compared to the normal US layout. I will also be using my Planck on my mac, and that's the standard in the Apple ecosystem. I may add a special compiler flag in the future to swap the two. +* The DVORAK `Z` key is to the right of the `S` key instead of under it as part of a compromise I made to keep the ARROW keys available on the default layer. I prioritize the ARROW keys, so the DVORAK layout is the one to suffer. +* I also support the little tones that the default Planck layout features, identical to them too, (minus those for layouts I don't support). To enable it, open the `Makefile` and set `AUDIO_ENABLE = yes`. diff --git a/keyboards/planck/keymaps/circuit/config.h b/keyboards/planck/keymaps/circuit/config.h new file mode 100644 index 0000000000..22244f4a7f --- /dev/null +++ b/keyboards/planck/keymaps/circuit/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* Tap-dance interval definition */ +#define TAPPING_TERM 200 + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev3 + #include "rev3/config.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4/config.h" +#endif + +#endif diff --git a/keyboards/planck/keymaps/circuit/keyboard-layout.png b/keyboards/planck/keymaps/circuit/keyboard-layout.png new file mode 100644 index 0000000000..e9296a6d97 Binary files /dev/null and b/keyboards/planck/keymaps/circuit/keyboard-layout.png differ diff --git a/keyboards/planck/keymaps/circuit/keymap.c b/keyboards/planck/keymaps/circuit/keymap.c new file mode 100644 index 0000000000..5096decb9b --- /dev/null +++ b/keyboards/planck/keymaps/circuit/keymap.c @@ -0,0 +1,258 @@ +// Layout picture at http://www.keyboard-layout-editor.com/#/gists/125febfad6960add078e6f14256539b6 + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE +#include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _DVORAK 1 +#define _LOCKED 2 +#define _NUMBER 3 +#define _ACTION 4 +#define _FUNCTN 5 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + DVORAK, + NUMBER, + ACTION +}; + +// Key code names +#define SFT_ENT FUNC(0) // Tap for enter, hold for right shift +#define LOCK FUNC(1) +#define KC_PSTE KC_PASTE +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#ifdef TAP_DANCE_ENABLE +#define SFT_CAP TD(0) // Left shift, double tap for caps +#endif +#ifndef TAP_DANCE_ENABLE +#define SFT_CAP KC_LSFT // Regular left shift +#endif + +// Tap Dance Definitions +#ifdef TAP_DANCE_ENABLE +const qk_tap_dance_action_t tap_dance_actions[] = { + [0] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS) +}; +#endif + +// Function definitions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [1] = ACTION_LAYER_TOGGLE(_LOCKED) +}; + +// Layout definitions +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | BKSP | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |*Shift| Z | X | C | V | B | N | M | , | . | Up |SftEnt| + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl | Alt | Cmd | Vol- | ACTN | Space | NUMS | Vol+ | Left | Down | Left | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {SFT_CAP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, SFT_ENT}, + {KC_LCTL, KC_LALT, KC_LGUI, KC_VOLD, ACTION, KC_SPC, KC_SPC, NUMBER, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT} +}, + +/* DVORAK + * ,-----------------------------------------------------------------------------------. + * | | ' | , | . | P | Y | F | G | C | R | L | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | A | O | E | U | I | D | H | T | N | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ; | Q | J | K | X | B | M | W | V | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {_______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, _______}, + {_______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_Z }, + {_______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* LOCK + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | NULL | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_LOCKED] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* NUMBERS + * ,-----------------------------------------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ~ | NULL | NULL | NULL | | | _ | + | { | } | ? | / | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | ` | NULL | NULL | NULL | \ | - | = | [ | ] | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | NULL | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_NUMBER] = { + {_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {_______, KC_TILD, XXXXXXX, XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_QUES, KC_SLSH}, + {_______, KC_GRV, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, _______}, + {_______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______} +}, + +/* ACTIONS + * ,-----------------------------------------------------------------------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | Undo | Cut | Copy | Paste| NULL | NULL | NULL | NULL | NULL | PgUp | Enter| + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | Mute | | NULL | | NULL | Home | PgDn | End | + * `-----------------------------------------------------------------------------------' + */ +[_ACTION] = { + {_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {KC_CAPS, KC_UNDO, KC_CUT, KC_COPY, KC_PSTE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, KC_ENT }, + {_______, _______, _______, KC_MUTE, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END } +}, + +/* FUNCTIONS + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | NULL | NULL | NULL | NULL | NULL |QWERTY|DVORAK| NULL | NULL | NULL | NULL | NULL | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Reset| NULL | Lock | NULL | | NULL | | NULL | NULL | NULL | NULL | + * `-----------------------------------------------------------------------------------' + */ +[_FUNCTN] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, + {KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24 }, + {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QWERTY, DVORAK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, + {RESET, XXXXXXX, LOCK, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +} + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + if (IS_LAYER_ON(_DVORAK)) { +#ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); +#endif + layer_off(_DVORAK); + } + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + if (!IS_LAYER_ON(_DVORAK)) { +#ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); +#endif + layer_on(_DVORAK); + } + } + return false; + break; + case NUMBER: + if (record->event.pressed) { + layer_on(_NUMBER); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } else { + layer_off(_NUMBER); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } + return false; + break; + case ACTION: + if (record->event.pressed) { + layer_on(_ACTION); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } else { + layer_off(_ACTION); + update_tri_layer(_NUMBER, _ACTION, _FUNCTN); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { +#ifdef AUDIO_ENABLE + startup_user(); +#endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif -- cgit v1.2.3 From 5abb05ca402a3ffbce1d4a0a7e3e4eba1ebc9d1b Mon Sep 17 00:00:00 2001 From: premek Date: Tue, 16 Aug 2016 00:44:58 +0200 Subject: premek split layout --- keyboards/planck/keymaps/premek/Makefile | 25 ++++ keyboards/planck/keymaps/premek/keymap.c | 231 ++++++++++++++++++++++++++++++ keyboards/planck/keymaps/premek/readme.md | 2 + 3 files changed, 258 insertions(+) create mode 100644 keyboards/planck/keymaps/premek/Makefile create mode 100644 keyboards/planck/keymaps/premek/keymap.c create mode 100644 keyboards/planck/keymaps/premek/readme.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/premek/Makefile b/keyboards/planck/keymaps/premek/Makefile new file mode 100644 index 0000000000..0f4953888d --- /dev/null +++ b/keyboards/planck/keymaps/premek/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/premek/keymap.c b/keyboards/planck/keymaps/premek/keymap.c new file mode 100644 index 0000000000..9b212ab259 --- /dev/null +++ b/keyboards/planck/keymaps/premek/keymap.c @@ -0,0 +1,231 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_TAB, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_LGUI, _______, _______, KC_LALT, LOWER, KC_SPC, KC_ENT, KC_SPC, RAISE, KC_RALT, _______, KC_RGUI} +}, +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END }, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, KC_F12, KC_PLUS, KC_PIPE, KC_LCBR, KC_RCBR}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, +[_RAISE] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {_______, _______, _______, KC_QUOT, KC_MINS, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}, + {_______, KC_TILD, KC_GRV, KC_PLUS, KC_EQL, KC_PIPE, _______, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/planck/keymaps/premek/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + -- cgit v1.2.3 From a75d4bd593491ea628a271aaddfc4268a241a68f Mon Sep 17 00:00:00 2001 From: premek Date: Tue, 16 Aug 2016 00:50:35 +0200 Subject: premek split layout --- keyboards/planck/keymaps/premek/readme.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md index de9680b498..df6053d6f8 100644 --- a/keyboards/planck/keymaps/premek/readme.md +++ b/keyboards/planck/keymaps/premek/readme.md @@ -1,2 +1,3 @@ -# The Default Planck Layout +# Split Layout +Inspired by TECK -- cgit v1.2.3 From 2ebfdcac404e4898110da40c4d2f86394595246d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?P=C5=99emek=20Vyhnal?= Date: Tue, 16 Aug 2016 01:07:34 +0200 Subject: Update readme.md --- keyboards/planck/keymaps/premek/readme.md | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/premek/readme.md b/keyboards/planck/keymaps/premek/readme.md index df6053d6f8..16debdd632 100644 --- a/keyboards/planck/keymaps/premek/readme.md +++ b/keyboards/planck/keymaps/premek/readme.md @@ -1,3 +1,4 @@ # Split Layout Inspired by TECK +[Layout](http://www.keyboard-layout-editor.com/##@_switchMount=cherry&switchBrand=gateron&switchType=KS-3-Tea&pcb:true%3B&@_c=%23e6e6e6&t=%23757575&a:7&fa@:5%3B%3B&=Esc&_a:4&fa@:5&:0&:0&:0&:0&:0&:0&:0&:0&:5%3B%3B&=%0A%0A!%0A1%0A%0A%0A%0A%0A%0AQ&=%0A%0A%2F@%0A2%0A%0A%0A%0A%0A%0AW&=%0A%0A%23%0A3%0A%0A%0A%0A%0A%0AE&=%0A%0A$%0A4%0A%0A%0A%0A%0A%0AR&=%0A%0A%25%0A5%0A%0A%0A%0A%0A%0AT&_c=%23e3b02d&a:7%3B&=Del&_c=%23e6e6e6&a:4%3B&=%0A%0A%5E%0A6%0A%0A%0A%0A%0A%0AY&=%0A%0A%2F&%0A7%0A%0A%0A%0A%0A%0AU&=%0A%0A*%0A8%0A%0A%0A%0A%0A%0AI&=%0A%0A(%0A9%0A%0A%0A%0A%0A%0AO&=%0A%0A)%0A0%0A%0A%0A%0A%0A%0AP%3B&@_a:7%3B&=Shift&_a:4%3B&=%0A%0A%0AF1%0A%0A%0A%0A%0A%0AA&=%0A%0A%0AF2%0A%0A%0A%0A%0A%0AS&=%0A%0A'%0AF3%0A%0A%0A%0A%0A%0AD&_c=%23e3b02d&n:true%3B&=%0A%0A-%0AF4%0A%0A%0A%0A%0A%0AF&_c=%23e6e6e6%3B&=%0A%0A%0AF5%0A%0A%0A%0A%0A%0AG&_c=%23e3b02d&a:7%3B&=Tab&_c=%23e6e6e6&a:4%3B&=%0A%0A%0AF6%0A%0A%0A%0A%0A%0AH&_c=%23e3b02d&n:true%3B&=%0A%0A%2F&larr%2F%3B%0AHom%0A%0A%0A%0A%0A%0AJ&_c=%23e6e6e6%3B&=%0A%0A%2F&darr%2F%3B%0APgD%0A%0A%0A%0A%0A%0AK&=%0A%0A%2F&uarr%2F%3B%0APgU%0A%0A%0A%0A%0A%0AL&=%0A%0A%2F&rarr%2F%3B%0AEnd%0A%0A%0A%0A%0A%0A%2F%3B%3B&@_a:7%3B&=Ctrl&_a:4%3B&=%0A%0A~%0AF7%0A%0A%0A%0A%0A%0AZ&=%0A%0A%60%0AF8%0A%0A%0A%0A%0A%0AX&=%0A%0A+%0AF9%0A%0A%0A%0A%0A%0AC&=%0A%0A%2F=%0AF10%0A%0A%0A%0A%0A%0AV&=%0A%0A%7C%0AF11%0A%0A%0A%0A%0A%0AB&_c=%23e3b02d&a:7%3B&=BSp&_c=%23e6e6e6&a:4%3B&=%0A%0A%5C%0AF12%0A%0A%0A%0A%0A%0AN&=%0A%0A%5B%0A%0A%0A%0A%0A%0A%0AM&=%0A%0A%5D%0A%0A%0A%0A%0A%0A%0A,&=%0A%0A%7B%0A%0A%0A%0A%0A%0A%0A.&=%0A%0A%7D%0A%0A%0A%0A%0A%0A%0A%2F%2F%3B&@_a:7%3B&=&=&=&=Alt&_c=%23e3b02d%3B&=%2F&dArr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&crarr%2F%3B&_c=%23e6e6e6%3B&=spc&_c=%23e3b02d%3B&=%2F&uArr%2F%3B&_c=%23e6e6e6%3B&=Alt&=&=) -- cgit v1.2.3 From b1ac91a040a464b595b819417fb1a04c5f9d8926 Mon Sep 17 00:00:00 2001 From: Toni Date: Tue, 16 Aug 2016 16:32:42 +0200 Subject: big cleanup and minor refactoring. thanks iFreilicht. --- keyboards/satan/keymaps/iso_split_rshift/Makefile | 27 +++---- keyboards/satan/keymaps/iso_split_rshift/config.h | 7 +- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 53 +++++++++---- keyboards/satan/keymaps/iso_split_rshift/satan.c | 30 ------- keyboards/satan/keymaps/iso_split_rshift/satan.h | 96 ----------------------- keyboards/satan/satan.h | 27 +++++++ 6 files changed, 77 insertions(+), 163 deletions(-) delete mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.c delete mode 100644 keyboards/satan/keymaps/iso_split_rshift/satan.h (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile index e25515b692..9187df44c8 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/Makefile +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -1,18 +1,15 @@ -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h index 39eec4b597..5e79e07f51 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/config.h +++ b/keyboards/satan/keymaps/iso_split_rshift/config.h @@ -20,12 +20,7 @@ along with this program. If not, see . #include "../../config.h" - +// only change #define RGB_DI_PIN B2 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 #endif diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index 68cc6755e1..f04036d103 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -13,8 +13,29 @@ #define _TAB 2 #define _SFX 3 +// dual-role shortcuts +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) +#define SPACEDUAL LT(_SPC, KC_SPACE) +#define ENTERDUAL CTL_T(KC_ENT) +// arrow cluster duality bottom right corner +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) +#define ARRRIGHT CTL_T(KC_RIGHT) +// german brackets +#define GER_CUR_L RALT(KC_7) // [ +#define GER_CUR_R RALT(KC_9) // ] +#define GER_PAR_L LSFT(KC_8) // ( +#define GER_PAR_R LSFT(KC_9) // ) +#define GER_ANG_L KC_NUBS // < +#define GER_ANG_R LSFT(KC_NUBS) // > +#define GER_BRC_L RALT(KC_8) // [ +#define GER_BRC_R RALT(KC_9) // ] + // increase readability #define _______ KC_TRNS +#define XXXXXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _DEF: Default Layer @@ -31,11 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' LEFT DWN RIGHT */ [_DEF] = KEYMAP_ISO_SPLITRSHIFT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - LT(_TAB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, CTL_T(KC_ENT), \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), SFT_T(KC_UP), \ - KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, ALT_T(KC_LEFT), GUI_T(KC_DOWN), CTL_T(KC_RIGHT)), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX), ARRUP, \ + KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) * ,-----------------------------------------------------------. @@ -51,11 +72,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_SPC] = KEYMAP_ISO_SPLITRSHIFT( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - _______, KC_PAUS, KC_UP, RALT(KC_8), RALT(KC_9), _______, _______, LSFT(KC_8), LSFT(KC_9), _______, _______, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ - _______, _______, _______, _______, KC_NUBS, LSFT(KC_NUBS), KC_SPACE,M(0), _______, _______, _______, _______, _______, KC_VOLU, \ - _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), + KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ + _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, _______, KC_VOLU, \ + _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) * ,-----------------------------------------------------------. @@ -71,11 +92,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_TAB] = KEYMAP_ISO_SPLITRSHIFT( - KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ - _______, _______, _______, _______, _______, _______, _______, RALT(KC_7), RALT(KC_0), _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ - _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) * ,-----------------------------------------------------------. @@ -93,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_SFX] = KEYMAP_ISO_SPLITRSHIFT( RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ - _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, KC_NO, KC_ENT, \ + _______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ _______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, _______, KC_UP, \ _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), }; diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.c b/keyboards/satan/keymaps/iso_split_rshift/satan.c deleted file mode 100644 index d2c5d5c205..0000000000 --- a/keyboards/satan/keymaps/iso_split_rshift/satan.c +++ /dev/null @@ -1,30 +0,0 @@ -#include "satan.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB |= (1<<2); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1< Date: Tue, 16 Aug 2016 16:35:57 +0200 Subject: minor grammer fixes --- keyboards/satan/keymaps/iso_split_rshift/readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/readme.md b/keyboards/satan/keymaps/iso_split_rshift/readme.md index 116ae9160a..ec6123d8a7 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/readme.md +++ b/keyboards/satan/keymaps/iso_split_rshift/readme.md @@ -21,7 +21,7 @@ For the full Quantum feature list, see the parent readme.md. * bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift * more bonus arrow keys on wasd (spacefn layer) * media keys prev/next/play/vol+/vol- (spacefn layer) -* formware bootloader button +* firmware bootloader button * WS2812 RGB Underglow Support (not needed anymore to solder directly to the atmega) * additional brackets that only work in german layout due to horrible placement in the default qwertz layout @@ -32,5 +32,5 @@ in the default qwertz layout * nice visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) * no-need-to-solder-on-chip picture: ![no need to solder directly on the chip anymore](LEDpinSatan.jpg) -* special thanks to /u/TerryMathews who suggested the pin PB2 so soldering +* special thanks to /u/TerryMathews who suggested the pin PB2, so soldering directly on the atmega is not needed anymore. Happened on [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/4ghq9z/photos_satan_rgb60_w1976/d2k5tra) -- cgit v1.2.3 From deedd2f40890807931d45422aab2beef702925c4 Mon Sep 17 00:00:00 2001 From: Toni Date: Tue, 16 Aug 2016 16:44:12 +0200 Subject: in accordance to keymap_makefile_example.mk --- keyboards/satan/keymaps/iso_split_rshift/Makefile | 24 +++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile index 9187df44c8..d1e07da3fc 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/Makefile +++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile @@ -1,15 +1,15 @@ -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID ifndef QUANTUM_DIR include ../../../../Makefile -- cgit v1.2.3 From 8e142d8cbe8a749878d6b8ee5b6316341f1dfbb6 Mon Sep 17 00:00:00 2001 From: Toni Date: Tue, 16 Aug 2016 17:35:03 +0200 Subject: no more warning thanks to iFreilicht's tip with undef --- keyboards/satan/keymaps/iso_split_rshift/config.h | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h index 5e79e07f51..27c1372da1 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/config.h +++ b/keyboards/satan/keymaps/iso_split_rshift/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #include "../../config.h" // only change +#undef RGB_DI_PIN #define RGB_DI_PIN B2 #endif -- cgit v1.2.3 From 29f64d7a93d941167c6c6e95f893ab84586b2205 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Wed, 17 Aug 2016 13:04:50 +0200 Subject: tap-dance: Major rework, to make it more reliable This reworks how the tap-dance feature works: instead of one global state, we have a state for each tap-dance key, so we can cancel them when another tap-dance key is in flight. This fixes #527. Since we have a state for each key, we can avoid situation where a keyup would mess with our global state. This fixes #563. And while here, we also make sure to fire events only once, and this fixes #574. There is one breaking change, though: tap-dance debugging support was removed, because dumping the whole state would increase the firmware size too much. Any keymap that made use of this, will have to be updated (but there's no such keymap in the repo). Also, there's a nice trick used in this rework: we need to iterate through tap_dance_actions in a few places, to check for timeouts, and so on. For this, we'd need to know the size of the array. We can't discover that at compile-time, because tap-dance gets compiled separately. We'd like to avoid having to terminate the list with a sentinel value, because that would require updates to all keymaps that use the feature. So, we keep track of the highest tap-dance code seen so far, and iterate until that index. Signed-off-by: Gergely Nagy --- keyboards/ergodox/keymaps/algernon/keymap.c | 2 +- keyboards/preonic/keymaps/kinesis/keymap.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index 244bfb51fe..144030e2e9 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -853,7 +853,7 @@ void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { td_ta->finished_once = false; } -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset) ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset) ,[CT_TA] = { diff --git a/keyboards/preonic/keymaps/kinesis/keymap.c b/keyboards/preonic/keymaps/kinesis/keymap.c index 1cd6eb9938..9691be91d9 100644 --- a/keyboards/preonic/keymaps/kinesis/keymap.c +++ b/keyboards/preonic/keymaps/kinesis/keymap.c @@ -123,7 +123,7 @@ void music_scale_user(void) } -const qk_tap_dance_action_t tap_dance_actions[] = { +qk_tap_dance_action_t tap_dance_actions[] = { //Tap once for equal, twice for hyper + X (alfred lock) [TD_EQ_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, HYPR(KC_X)), //Tap once for minus, twice for time.heals.nothing -- cgit v1.2.3 From c024de4a879cdab04f0473c29c6e9c4f6f28cbae Mon Sep 17 00:00:00 2001 From: Toni Date: Wed, 17 Aug 2016 15:33:14 +0200 Subject: wring keypress for german iso fixed. prettified --- keyboards/satan/keymaps/iso_split_rshift/keymap.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'keyboards') diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c index f04036d103..bc5bfe2e63 100644 --- a/keyboards/satan/keymaps/iso_split_rshift/keymap.c +++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c @@ -14,18 +14,18 @@ #define _SFX 3 // dual-role shortcuts -#define TABDUAL LT(_TAB, KC_TAB) -#define CAPSDUAL CTL_T(KC_ESC) +#define TABDUAL LT(_TAB, KC_TAB) +#define CAPSDUAL CTL_T(KC_ESC) #define SPACEDUAL LT(_SPC, KC_SPACE) #define ENTERDUAL CTL_T(KC_ENT) // arrow cluster duality bottom right corner -#define ARRLEFT ALT_T(KC_LEFT) -#define ARRDOWN GUI_T(KC_DOWN) -#define ARRUP SFT_T(KC_UP) +#define ARRLEFT ALT_T(KC_LEFT) +#define ARRDOWN GUI_T(KC_DOWN) +#define ARRUP SFT_T(KC_UP) #define ARRRIGHT CTL_T(KC_RIGHT) // german brackets #define GER_CUR_L RALT(KC_7) // [ -#define GER_CUR_R RALT(KC_9) // ] +#define GER_CUR_R RALT(KC_0) // ] #define GER_PAR_L LSFT(KC_8) // ( #define GER_PAR_R LSFT(KC_9) // ) #define GER_ANG_L KC_NUBS // < -- cgit v1.2.3