From 5747449ca545d60a96be504d177f749a18feb181 Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Thu, 4 Apr 2019 08:45:55 +1100 Subject: Eager Per Row Debouncing added (added to Ergodox) (#5498) * Implemented Eager Per Row debouncing algorithm. Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical) * Added documentation for eager_pr * Ported ergodox_ez to eager_pr debouncing. * Removed check for changes in matrix_scan. * Added further clarification in docs. * Accidental merge with ergodox_ez * Small cleanup in eager_pr * Forgot to debounce_init - this would probably cause seg-faults. --- keyboards/ergodox_ez/matrix.c | 458 ++++++++++++++++++------------------------ keyboards/ergodox_ez/rules.mk | 1 + 2 files changed, 197 insertions(+), 262 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index 860cf7b229..97f764113b 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -33,14 +33,14 @@ along with this program. If not, see . #include "debug.h" #include "util.h" #include "matrix.h" +#include "debounce.h" #include QMK_KEYBOARD_H #ifdef DEBUG_MATRIX_SCAN_RATE -#include "timer.h" +# include "timer.h" #endif /* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. + * This constant define not debouncing time in msecs, assuming eager_pr. * * On Ergodox matrix scan rate is relatively low, because of slow I2C. * Now it's only 317 scans/second, or about 3.15 msec/scan. @@ -52,26 +52,17 @@ along with this program. If not, see . */ #ifndef DEBOUNCE -# define DEBOUNCE 5 +# define DEBOUNCE 5 #endif /* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -/* - * matrix state(1:on, 0:off) - * contains the raw values without debounce filtering of the last read cycle. - */ -static matrix_row_t raw_matrix[MATRIX_ROWS]; - -// Debouncing: store for each key the number of scans until it's eligible to -// change. When scanning the matrix, ignore any changes in keys that have -// already changed in the last DEBOUNCE scans. -static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; +static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values static matrix_row_t read_cols(uint8_t row); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); static uint8_t mcp23018_reset_loop; // static uint16_t mcp23018_reset_loop; @@ -81,197 +72,137 @@ uint32_t matrix_timer; uint32_t matrix_scan_count; #endif +__attribute__((weak)) void matrix_init_user(void) {} -__attribute__ ((weak)) -void matrix_init_user(void) {} +__attribute__((weak)) void matrix_scan_user(void) {} -__attribute__ ((weak)) -void matrix_scan_user(void) {} +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} +inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} +inline uint8_t matrix_cols(void) { return MATRIX_COLS; } -void matrix_init(void) -{ - // initialize row and col +void matrix_init(void) { + // initialize row and col - mcp23018_status = init_mcp23018(); + mcp23018_status = init_mcp23018(); + unselect_rows(); + init_cols(); - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - raw_matrix[i] = 0; - for (uint8_t j=0; j < MATRIX_COLS; ++j) { - debounce_matrix[i * MATRIX_COLS + j] = 0; - } - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + raw_matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif - - matrix_init_quantum(); - + debounce_init(MATRIX_ROWS); + matrix_init_quantum(); } void matrix_power_up(void) { - mcp23018_status = init_mcp23018(); + mcp23018_status = init_mcp23018(); - unselect_rows(); - init_cols(); + unselect_rows(); + init_cols(); - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif } -// Returns a matrix_row_t whose bits are set if the corresponding key should be -// eligible to change in this scan. -matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) { - matrix_row_t result = 0; - matrix_row_t change = rawcols ^ raw_matrix[row]; - raw_matrix[row] = rawcols; - for (uint8_t i = 0; i < MATRIX_COLS; ++i) { - if (debounce_matrix[row * MATRIX_COLS + i]) { - --debounce_matrix[row * MATRIX_COLS + i]; - } else { - result |= (1 << i); - } - if (change & (1 << i)) { - debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; +uint8_t matrix_scan(void) { + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + ergodox_blink_all_leds(); + } } } - return result; -} - -matrix_row_t debounce_read_cols(uint8_t row) { - // Read the row without debouncing filtering and store it for later usage. - matrix_row_t cols = read_cols(row); - // Get the Debounce mask. - matrix_row_t mask = debounce_mask(cols, row); - // debounce the row and return the result. - return (cols & mask) | (matrix[row] & ~mask);; -} - -uint8_t matrix_scan(void) -{ - if (mcp23018_status) { // if there was an error - if (++mcp23018_reset_loop == 0) { - // if (++mcp23018_reset_loop >= 1300) { - // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans - // this will be approx bit more frequent than once per second - print("trying to reset mcp23018\n"); - mcp23018_status = init_mcp23018(); - if (mcp23018_status) { - print("left side not responding\n"); - } else { - print("left side attached\n"); - ergodox_blink_all_leds(); - } - } - } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_scan_count++; + matrix_scan_count++; - uint32_t timer_now = timer_read32(); - if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { - print("matrix scan frequency: "); - pdec(matrix_scan_count); - print("\n"); + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); - matrix_timer = timer_now; - matrix_scan_count = 0; - } + matrix_timer = timer_now; + matrix_scan_count = 0; + } #endif #ifdef LEFT_LEDS - mcp23018_status = ergodox_left_leds_update(); -#endif // LEFT_LEDS - for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { - select_row(i); - // and select on left hand - select_row(i + MATRIX_ROWS_PER_SIDE); - // we don't need a 30us delay anymore, because selecting a - // left-hand row requires more than 30us for i2c. - - // grab cols from left hand - matrix[i] = debounce_read_cols(i); - // grab cols from right hand - matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE); - - unselect_rows(); - } - - matrix_scan_quantum(); + mcp23018_status = ergodox_left_leds_update(); +#endif // LEFT_LEDS + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + select_row(i); + select_row(i + MATRIX_ROWS_PER_SIDE); + + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + // grab left + right cols. + raw_matrix[i] = read_cols(i); + raw_matrix[i+MATRIX_ROWS_PER_SIDE] = read_cols(i+MATRIX_ROWS_PER_SIDE); + + unselect_rows(); + } + + debounce(raw_matrix, matrix, MATRIX_ROWS, true); + matrix_scan_quantum(); - return 1; + return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. +bool matrix_is_modified(void) // deprecated and evidently not called. { - return true; + return true; } -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 2)); + uint8_t data = 0; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status < 0) goto out; + data = ~((uint8_t)mcp23018_status); + mcp23018_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + return data; } + } else { + /* read from teensy + * bitmask is 0b11110011, but we want those all + * in the lower six bits. + * we'll return 1s for the top two, but that's harmless. + */ + + return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2)); + } } /* Row pin configuration @@ -333,69 +266,70 @@ static matrix_row_t read_cols(uint8_t row) * row: 0 1 2 3 4 5 6 * pin: A0 A1 A2 A3 A4 A5 A6 */ -static void unselect_rows(void) -{ - // no need to unselect on mcp23018, because the select step sets all - // the other row bits high, and it's not changing to a different - // direction - - // unselect on teensy - // Hi-Z(DDR:0, PORT:0) to unselect - DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - DDRD &= ~(1<<2 | 1<<3); - PORTD &= ~(1<<2 | 1<<3); - DDRC &= ~(1<<6); - PORTC &= ~(1<<6); +static void unselect_rows(void) { + // no need to unselect on mcp23018, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction + + // unselect on teensy + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + DDRD &= ~(1 << 2 | 1 << 3); + PORTD &= ~(1 << 2 | 1 << 3); + DDRC &= ~(1 << 6); + PORTC &= ~(1 << 6); } -static void select_row(uint8_t row) -{ - if (row < 7) { - // select on mcp23018 - if (mcp23018_status) { // if there was an error - // do nothing - } else { - // set active row low : 0 - // set other rows hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0xFF & ~(1<