From 7d5902752ee8088b04763bce2d950ab61be730f2 Mon Sep 17 00:00:00 2001 From: Nicolas Schodet Date: Tue, 9 Feb 2021 18:10:54 +0100 Subject: [Keyboard] Add Splitty keyboard (#11613) --- keyboards/splitty/readme.md | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 keyboards/splitty/readme.md (limited to 'keyboards/splitty/readme.md') diff --git a/keyboards/splitty/readme.md b/keyboards/splitty/readme.md new file mode 100644 index 0000000000..1dec34c665 --- /dev/null +++ b/keyboards/splitty/readme.md @@ -0,0 +1,45 @@ +# Splitty + +![Splitty](http://ni.fr.eu.org/~nico/qmk/splitty/splitty_for_scale.jpg) + +![Bottom view](http://ni.fr.eu.org/~nico/qmk/splitty/bottom_view.jpg) + +![Side view](http://ni.fr.eu.org/~nico/qmk/splitty/stack_view.jpg) + +![PCB](http://ni.fr.eu.org/~nico/qmk/splitty/splitty.png) + +This is a split ergonomic keyboard initially based on the Ergodox layout +without the thumb cluster. It uses 32 keys per sides with Cherry MX +compatibles switches, thirty 1u and two vertical 1.5u caps. + +The controller is integrated in order to make the keyboard as slim as possible. + +It connects to the computer using a micro-B USB. Both sides are connected +together also using micro-B USB. Any connection mistake should not break +anything and the keyboard supports hot plugging. + +* Keyboard Maintainer: [Nicolas Schodet](https://github.com/schodet) +* Hardware Supported: Splitty +* Hardware Availability: [Splitty](https://git.ni.fr.eu.org/splitty.git/about/) + +Make example for this keyboard (after setting up your build environment): + + make splitty:default + +Flashing example for this keyboard: + + make splitty:default:flash + +Handedness should be programmed in EEPROM once, you can use these commands to +flash the firmware and the EEPROM: + + make splitty:default:dfu-split-left + make splitty:default:dfu-split-right + +If you do not have a reset keycode in your keymap, press the reset button or +short the corresponding contacts if not populated to enter bootloader. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) +and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) +for more information. Brand new to QMK? Start with our +[Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3