From 66fc18c75646e77d9768803298777d39087577cf Mon Sep 17 00:00:00 2001
From: Ryan Skidmore <github@ryanskidmore.co.uk>
Date: Mon, 2 May 2022 20:34:44 +0100
Subject: keyboards/ryanskidmore: add rskeys100 keyboard (#15506)

* keyboards/ryanskidmore/rskeys100: add rskeys100 draft firmware

* keyboards/ryanskidmore/rskeys100: fix firmware

* ryanskidmore/rskeys100: fix remaining bugs

* keyboards/ryanskidmore/rskeys100: finishing touches on firmware

* keyboards/ryanskidmore/rskeys100: migrate from full replacement matrix scanning to lite, move rgb matrix enable call to keymap

* keyboards/ryanskidmore/rskeys100: remove undefines, clarify comments

* ryanskidmore/rskeys100: remove unused imports

* keyboards/ryanskidmore/rskeys100: pr feedback
---
 keyboards/ryanskidmore/rskeys100/config.h | 85 +++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)
 create mode 100644 keyboards/ryanskidmore/rskeys100/config.h

(limited to 'keyboards/ryanskidmore/rskeys100/config.h')

diff --git a/keyboards/ryanskidmore/rskeys100/config.h b/keyboards/ryanskidmore/rskeys100/config.h
new file mode 100644
index 0000000000..9e036aa70d
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/config.h
@@ -0,0 +1,85 @@
+// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x7273 // rs
+#define PRODUCT_ID   0x0064 // 100
+#define DEVICE_VER   0x0001 // rev 1
+#define MANUFACTURER ryanskidmore
+#define PRODUCT      rsKeys100
+
+/* Key Matrix Sizes */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 24
+
+/* Rows */
+#define ROW_A  D4
+#define ROW_B  C6
+#define ROW_C  D7
+#define ROW_D  E6
+#define ROW_E  B4
+#define ROW_F  B5
+
+/* Columns 0 - 20 (24 with dummy columns for shift registers) */
+#define SHR_LATCH B2
+#define SHR_CLOCK B3
+#define SHR_DATA  B1
+#define SHR_COLS { 0x000001, 0x000002, 0x000004, 0x000008, 0x000010, 0x000020, 0x000040, 0x000080, 0x000100, 0x000200, 0x000400, 0x000800, 0x001000, 0x002000, 0x004000, 0x008000, 0x010000, 0x020000, 0x040000, 0x080000, 0x100000, 0x200000, 0x400000, 0x800000 }
+
+/* The shift registers on the matrix PCB output a signal on each column, which passes through the
+ * switch and a diode towards the row. The row is then connected to the AVR as an input. This means
+ * the diode direction is COL(umn) to ROW */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB Data Pin */
+#define RGB_DI_PIN C7
+/* The number of RGB LEDs connected */
+#define DRIVER_LED_TOTAL 105
+/* Set the maximum brightness to 110 to avoid going over 500 mA.
+ * At full brightness with all three indicator LEDs on, the power draw is about 450 mA. */
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 110
+/* Enable framebuffer effects */
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+/* Enable the cycle left right animation and set it as the startup mode */
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Set the max power consumption for the keyboard, which is 500 mA. */
+#define USB_MAX_POWER_CONSUMPTION 500
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
\ No newline at end of file
-- 
cgit v1.2.3