From ade22f8e2c272044ea2f80ff6fe5ca9576858939 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 16 Jul 2018 11:48:31 -0400 Subject: Adds support for Planck Rev 6 (#2666) * initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT --- keyboards/planck/rev6/config.h | 138 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 138 insertions(+) create mode 100644 keyboards/planck/rev6/config.h (limited to 'keyboards/planck/rev6/config.h') diff --git a/keyboards/planck/rev6/config.h b/keyboards/planck/rev6/config.h new file mode 100644 index 0000000000..0e462180bd --- /dev/null +++ b/keyboards/planck/rev6/config.h @@ -0,0 +1,138 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef REV6_CONFIG_H +#define REV6_CONFIG_H + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0006 + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +/* Note: These are not used for arm boards. They're here purely as documentation. + * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 } + * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 } + * #define UNUSED_PINS + */ + +#define MUSIC_MAP +#undef AUDIO_VOICES +#undef C6_AUDIO + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 + +/* Prevent modifiers from being stuck on after layer changes. */ +#define PREVENT_STUCK_MODIFIERS + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#define WS2812_LED_N 2 +#define RGBLED_NUM WS2812_LED_N +#define WS2812_TIM_N 2 +#define WS2812_TIM_CH 2 +#define PORT_WS2812 GPIOA +#define PIN_WS2812 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP +//#define WS2812_EXTERNAL_PULLUP + +#endif -- cgit v1.2.3