From b6850bc043b1d129042f47501f0a1dc1e196f962 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 9 Apr 2019 08:58:11 -0700 Subject: remove all keyboards but ergodox and planck --- keyboards/lfkeyboards/mini1800/mini1800.c | 233 ------------------------------ 1 file changed, 233 deletions(-) delete mode 100644 keyboards/lfkeyboards/mini1800/mini1800.c (limited to 'keyboards/lfkeyboards/mini1800/mini1800.c') diff --git a/keyboards/lfkeyboards/mini1800/mini1800.c b/keyboards/lfkeyboards/mini1800/mini1800.c deleted file mode 100644 index d5f4193c1d..0000000000 --- a/keyboards/lfkeyboards/mini1800/mini1800.c +++ /dev/null @@ -1,233 +0,0 @@ - -#include -#include -#include -#include "mini1800.h" -#include "keymap.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" - -#define BACKLIGHT_BREATHING -#include "quantum.h" - -uint16_t click_hz = CLICK_HZ; -uint16_t click_time = CLICK_MS; -uint8_t click_toggle = CLICK_ENABLED; -float my_song[][2] = SONG(ZELDA_PUZZLE); - -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -__attribute__((weak)) -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - -void matrix_init_kb(void) -{ - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - set_rgb(31, 0x00, 0x00, 0x00); // Caps lock - set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red -#ifndef AUDIO_ENABLE - // If we're not using the audio pin, drive it low - sbi(DDRC, 6); - cbi(PORTC, 6); -#endif - _delay_ms(500); -#ifdef ISSI_ENABLE - issi_init(); -#endif -#ifdef WATCHDOG_ENABLE - // This is done after turning the layer LED red, if we're caught in a loop - // we should get a flashing red light - wdt_enable(WDTO_500MS); -#endif -} - -void matrix_scan_kb(void) -{ -#ifdef WATCHDOG_ENABLE - wdt_reset(); -#endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } -#endif - // Update layer indicator LED - // - // Not sure how else to reliably do this... TMK has the 'hook_layer_change' - // but can't find QMK equiv - static uint32_t layer_indicator = -1; - if(layer_indicator != layer_state){ - for(uint32_t i=0;; i++){ - // the layer_info list should end with layer 0xFFFF - // it will break this out of the loop and define the unknown layer color - if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ - set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue); - layer_indicator = layer_state; - break; - } - } - } - matrix_scan_user(); -} - -void click(uint16_t freq, uint16_t duration){ -#ifdef AUDIO_ENABLE - if(freq >= 100 && freq <= 20000 && duration < 100){ - play_note(freq, 10); - for (uint16_t i = 0; i < duration; i++){ - _delay_ms(1); - } - stop_all_notes(); - } -#endif -} - -bool process_record_kb(uint16_t keycode, keyrecord_t* record) -{ - if (click_toggle && record->event.pressed){ - click(click_hz, click_time); - } - if (keycode == RESET) { - reset_keyboard_kb(); - } else { - } - return process_record_user(keycode, record); -} - -void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) -{ -#ifdef AUDIO_ENABLE - int8_t sign = 1; -#endif - if(id == LFK_ESC_TILDE){ - // Send ~ on shift-esc - void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; - uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); - method(shifted ? KC_GRAVE : KC_ESCAPE); - send_keyboard_report(); - }else if(event->event.pressed){ - switch(id){ - case LFK_SET_DEFAULT_LAYER: - // set/save the current base layer to eeprom, falls through to LFK_CLEAR - eeconfig_update_default_layer(1UL << opt); - default_layer_set(1UL << opt); - case LFK_CLEAR: - // Go back to default layer - layer_clear(); - break; -#ifdef ISSI_ENABLE - case LFK_LED_TEST: - led_test(); - break; -#endif -#ifdef AUDIO_ENABLE - case LFK_CLICK_FREQ_LOWER: - sign = -1; // continue to next statement - case LFK_CLICK_FREQ_HIGHER: - click_hz += sign * 100; - click(click_hz, click_time); - break; - case LFK_CLICK_TOGGLE: - if(click_toggle){ - click_toggle = 0; - click(4000, 100); - click(1000, 100); - }else{ - click_toggle = 1; - click(1000, 100); - click(4000, 100); - } - break; - case LFK_CLICK_TIME_SHORTER: - sign = -1; // continue to next statement - case LFK_CLICK_TIME_LONGER: - click_time += sign; - click(click_hz, click_time); - break; -#endif - case LFK_PLAY_ONEUP: - PLAY_SONG(my_song); - break; - } - } -} - -void reset_keyboard_kb(){ -#ifdef WATCHDOG_ENABLE - MCUSR = 0; - wdt_disable(); - wdt_reset(); -#endif - set_rgb(31, 0x00, 0xFF, 0xFF); - set_rgb(32, 0x00, 0xFF, 0xFF); - force_issi_refresh(); - reset_keyboard(); -} - -void led_set_kb(uint8_t usb_led) -{ - // Set capslock LED to Blue - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - set_rgb(31, 0x00, 0x00, 0x7F); - }else{ - set_rgb(31, 0x00, 0x00, 0x00); - } - led_set_user(usb_led); -} - -// Lighting info, see lighting.h for details -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; - -// RGB Map: -// 27 29 10 9 8 7 6 -// 26 5 -// 25 4 -// 24 3 -// 23 22 21 20 14 15 11 1 2 -const uint8_t rgb_sequence[] = { - 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 13, 14, 15, 16 -}; - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// | | ISSI Col | ISSI Row | -// / | -// Device -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = -LAYOUT( - 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, - 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, - 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, - 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, - 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1, - 0x00, 0x00, 0x00, 0x00); -- cgit v1.2.3