From fafb33d9ddbc38335b4488efbc47ed29fc279d1a Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 23 Jan 2019 17:37:24 -0800 Subject: [Keyboard] Add KBD67 Hotswap Support (#4916) * initial commit * move the original kbd67 stuff into its own directory, rev1 * get rid of vanilla cookie cutter code * put in the switch matrix pins, backlight pin, and rgb underglow pin. Number of underglow LEDs is questionable. * switch matrix created for hotswap * create a basic keymap for testing * make info.json for QMK Configurator support * rename kbd67 due to compile error * kbd67 generic readme file * fix make instructions for the new rev1 * comment out unneeded rgb light #defines * Update keyboards/kbd67/readme.md Add an extra space for proper markdown rendering Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/kbd67/hotswap/hotswap.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/kbd67/hotswap/keymaps/default/keymap.c Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * use pragma once * proper format of MechMerlin --- keyboards/kbd67/rev1/rules.mk | 80 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 keyboards/kbd67/rev1/rules.mk (limited to 'keyboards/kbd67/rev1/rules.mk') diff --git a/keyboards/kbd67/rev1/rules.mk b/keyboards/kbd67/rev1/rules.mk new file mode 100644 index 0000000000..65c82dd7f5 --- /dev/null +++ b/keyboards/kbd67/rev1/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -- cgit v1.2.3 From 5d1ea88bf7c16b858dd94d9a0ce5a351a49f6e07 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 23 Jan 2019 21:06:55 -0800 Subject: [Keyboard] KBD67: enable bootmagic lite by default (#4931) * enable bootmagic lite by default * add a second layer with a reset key --- keyboards/kbd67/rev1/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/kbd67/rev1/rules.mk') diff --git a/keyboards/kbd67/rev1/rules.mk b/keyboards/kbd67/rev1/rules.mk index 65c82dd7f5..0d7c14ad45 100644 --- a/keyboards/kbd67/rev1/rules.mk +++ b/keyboards/kbd67/rev1/rules.mk @@ -61,7 +61,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) -- cgit v1.2.3