From b27fb216efaa095d19b0175b9f64f96ff5e3544a Mon Sep 17 00:00:00 2001 From: jpetermans Date: Sun, 30 Apr 2017 16:27:46 -0700 Subject: Testing initial blink support --- keyboards/infinity60/led_controller.c | 254 +++++++++++++++++++++++----------- keyboards/infinity60/led_controller.h | 7 +- 2 files changed, 180 insertions(+), 81 deletions(-) (limited to 'keyboards/infinity60') diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c index 4dc9b92342..59ca833b65 100644 --- a/keyboards/infinity60/led_controller.c +++ b/keyboards/infinity60/led_controller.c @@ -72,7 +72,7 @@ along with this program. If not, see . #define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS #endif -#define DEBUG_ENABLED 0 +#define DEBUG_ENABLED 1 /* ================= * ChibiOS I2C setup @@ -214,44 +214,58 @@ page_status = 0; //start frame 0 (all off/on) //TODO: lighting key led on keypress break; - //TODO: custom page that is written using keypresses //TODO: BLINK_ON/OFF_LED + break; case OFF_LED: //on/off/toggle single led, msg_led = row/col of led - xprintf("OFF_LED\n"); + xprintf("OFF_LED: %d\n", msg_led); chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 0); is31_write_data (7, control_register_word, 0x02); break; - case ON_LED: - xprintf("ON_LED\n"); + xprintf("ON_LED: %d\n", msg_led); chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 1); is31_write_data (7, control_register_word, 0x02); break; - case TOGGLE_LED: - xprintf("TOGGLE_LED\n"); + xprintf("TOGGLE_LED: %d\n", msg_led); chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 2); is31_write_data (7, control_register_word, 0x02); break; + case BLINK_OFF_LED: + //on/off/toggle single led, msg_led = row/col of led + xprintf("BLINK_ON: %d\n", msg_led); + chThdSleepMilliseconds(10); + set_led_bit(7, control_register_word, msg_led, 4); + is31_write_data (7, control_register_word, 0x02); + break; + case BLINK_ON_LED: + xprintf("BLINK_OFF: %d\n", msg_led); + chThdSleepMilliseconds(10); + set_led_bit(7, control_register_word, msg_led, 5); + is31_write_data (7, control_register_word, 0x02); + break; + case BLINK_TOGGLE_LED: + xprintf("BLINK_TOGGLE: %d\n", msg_led); + chThdSleepMilliseconds(10); + set_led_bit(7, control_register_word, msg_led, 6); + is31_write_data (7, control_register_word, 0x02); + case TOGGLE_ALL: - xprintf("TOGGLE_ALL\n"); + xprintf("TOGGLE_ALL: %d\n", msg_led); chThdSleepMilliseconds(10); //msg_led = unused is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 0 off led_control_reg[0] = 0; + if (temp==0 || page_status > 0) { - xprintf("all leds on"); - chThdSleepMilliseconds(10); __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); } else { - xprintf("all leds off"); - chThdSleepMilliseconds(10); __builtin_memset(led_control_reg+1, 0, 0x12); } is31_write_data(0, led_control_reg, 0x13); @@ -292,15 +306,19 @@ page_status = 0; //start frame 0 (all off/on) case DISPLAY_PAGE://show single layer indicator or full map of layer //msg_led = page to toggle on - xprintf("DISPLAY_PAGE\n"); + xprintf("DISPLAY_PAGE"); chThdSleepMilliseconds(10); if (page_status != msg_led) { + xprintf(" - new page\n"); + chThdSleepMilliseconds(10); is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led); } page_status = msg_led; break; case RESET_PAGE: + xprintf("RESET_PAGE\n"); + chThdSleepMilliseconds(10); //led_msg = page to reset led_control_reg[0] = 0; __builtin_memset(led_control_reg+1, 0, 0x12); @@ -317,19 +335,23 @@ page_status = 0; //start frame 0 (all off/on) case TOGGLE_NUM_LOCK: //msg_led = 0 or 1, off/on - set_lock_leds(USB_LED_NUM_LOCK, msg_led); + xprintf("NUMLOCK: %d\n", msg_led); + chThdSleepMilliseconds(10); + set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led); break; case TOGGLE_CAPS_LOCK: + xprintf("CAPSLOCK: %d\n", msg_led); + chThdSleepMilliseconds(10); //msg_led = 0 or 1, off/on - set_lock_leds(USB_LED_CAPS_LOCK, msg_led); + set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led); break; //TODO: MODE_BREATH case MODE_BREATH: break; case STEP_BRIGHTNESS: - xprintf("TOGGLE_BACKLIGHT\n"); + xprintf("STEP_BACKLIGHT\n"); chThdSleepMilliseconds(10); //led_msg = step pwm up or down switch (msg_led) { @@ -394,27 +416,101 @@ page_status = 0; //start frame 0 (all off/on) chThdSleepMilliseconds(10); } #if DEBUG_ENABLED - uint8_t j, page; + uint8_t j; + uint8_t pages[3]={0x00, 0x07}; //debugging code - print full led/blink/pwm registers on each frame xprintf("----layer state----: %X\n", layer_state); - for(i=0;i<8;i++) { - xprintf("page: %d", i); - chThdSleepMilliseconds(2); - for(j=0;j<0xB4;j++){ - is31_read_register(i,j,&temp); + for(i=0;i<2;i++) { + xprintf("page: %d\n", pages[i]); chThdSleepMilliseconds(2); - xprintf("%02X, ", temp); - if(j % 9 == 0){ + for(j=0;j<0x24;j++){ + if(j > 0 && j % 9 == 0){ xprintf("\n"); - if(j % 18 ==0){ - xprintf("register"); - xprintf("\n"); - } + } + switch (j) { + case 0: + xprintf("\n--on-off--\n"); + chThdSleepMilliseconds(2); + break; + case 0x12: + xprintf("\n--blink--\n"); + chThdSleepMilliseconds(2); + break; } - chThdSleepMilliseconds(1); + is31_read_register(pages[i],j,&temp); + xprintf("%02X, ", temp); + chThdSleepMilliseconds(2); } + + xprintf("\n--pwm--\n"); + chThdSleepMilliseconds(2); + for(j=0x24;j<0xB4;j++) { + is31_read_register(pages[i],j,&temp); + xprintf("%02X, ", temp); + chThdSleepMilliseconds(2); + if(j > 0x24 && (j-4) % 8 == 0){ xprintf("\n"); + } + } + xprintf("\n"); + } + + //Function Register + xprintf("\n--FUNCTION--\n"); + chThdSleepMilliseconds(2); + for(j=0;j<0x0D;j++) { + is31_read_register(0x0B,j,&temp); + switch(j) { + case 0: + xprintf("Config %02X", temp); + chThdSleepMilliseconds(2); + break; + case 1: + xprintf(" - Pict %02X\n", temp); + chThdSleepMilliseconds(2); + break; + case 2: + xprintf("Auto1 %02X", temp); + chThdSleepMilliseconds(2); + break; + case 3: + xprintf(" - Auto2 %02X\n", temp); + chThdSleepMilliseconds(2); + break; + case 5: + xprintf("Disp %02X", temp); + chThdSleepMilliseconds(2); + break; + case 6: + xprintf(" - Audio %02X\n", temp); + chThdSleepMilliseconds(2); + break; + case 7: + xprintf("Frame %02X", temp); + chThdSleepMilliseconds(2); + break; + case 8: + xprintf(" - Breath1 %02X\n", temp); + chThdSleepMilliseconds(2); + break; + case 9: + xprintf("Breath2 %02X - ", temp); + chThdSleepMilliseconds(2); + break; + case 10: + xprintf(" - Shut %02X\n", temp); + chThdSleepMilliseconds(2); + break; + case 11: + xprintf("AGC %02X", temp); + chThdSleepMilliseconds(2); + break; + case 12: + xprintf(" - ADC %02X\n", temp); + chThdSleepMilliseconds(2); + break; } + } #endif } } @@ -425,22 +521,39 @@ page_status = 0; //start frame 0 (all off/on) void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) { //returns 2 bytes led control register address and byte to write + //0 - bit off, 1 - bit on, 2 - toggle bit + + uint8_t control_reg_addr, column_bit, column_byte, temp, blink_on; - uint8_t control_reg_addr, column_bit, column_byte, temp; //check for valid led address - if (led_addr < 0 || led_addr > 90 || led_addr % 10 > 8) { + if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) { xprintf("Invalid address: %d\n", led_addr); return; } + xprintf("set_led_bit: %d\n", led_addr); + xprintf("action: %d\n", action); + chThdSleepMilliseconds(10); + //check blink bit + blink_on = action>>2; + action &= ~(1<<2); //strip blink bit + //first byte is led control register address 0x00 //msg_led tens column is pin#, ones column is bit position in 8-bit mask control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte + xprintf("pre-reg_addr: %X\n", control_reg_addr); + chThdSleepMilliseconds(10); + control_reg_addr += blink_on == 1 ? 0x12 : 0x00;//shift 12 bytes to blink register + xprintf("blink-reg_addr: %X\n", control_reg_addr); + chThdSleepMilliseconds(10); + column_bit = 1<<(led_addr % 10 - 1); is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte column_byte = temp; + xprintf("column_byte read: %X\n", column_byte); + chThdSleepMilliseconds(10); switch(action) { case 0: column_byte &= ~column_bit; @@ -452,72 +565,58 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint column_byte ^= column_bit; break; } + xprintf("column_byte write: %X\n", column_byte); + chThdSleepMilliseconds(10); //return word to be written in register led_control_reg[0] = control_reg_addr; led_control_reg[1] = column_byte; } -void set_lock_leds(uint8_t lock_type, uint8_t led_on) { - uint8_t page, led_addr, start, temp; - uint8_t led_control_word[2] = {0}; - //TODO: this function call could send led address vs lock_type. - //however, the switch/case allows for additional steps, like audio, depending on type +void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) { + uint8_t led_control_word[2] = {0};//register address and led on/off mask - led_addr = 0; - switch(lock_type) { - case USB_LED_NUM_LOCK: - led_addr = NUM_LOCK_LED_ADDRESS; - break; - case USB_LED_CAPS_LOCK: - led_addr = CAPS_LOCK_LED_ADDRESS; - break; - #ifdef SCROLL_LOCK_LED_ADDRESS - case USB_LED_SCROLL_LOCK: - led_addr = SCROLL_LOCK_LED_ADDRESS; - break; - #endif - #ifdef COMPOSE_LED_ADDRESS - case USB_LED_COMPOSE: - led_addr = COMPOSE_LED_ADDRESS; - break; - #endif - #ifdef SCROLL_LOCK_LED_ADDRESS - case USB_LED_KANA: - led_addr = KANA_LED_ADDRESS; - break; - #endif - } - - //ignore frame0 if all leds are on or if option set in led_controller.h - //TODO: blink of all leds are on, clear blink register if not - is31_read_register(0, 0x00, &temp); - led_addr += temp == 0 ? 0 : 0x12;//send bit to blink register instead - start = BACKLIGHT_OFF_LOCK_LED_OFF ? 1 : 0; - - for(page=start; page<8; page++) { - set_led_bit(page,led_control_word,led_addr,led_on); - is31_write_data(page, led_control_word, 0x02); - } + led_control_word[0] = (row - 1 ) * 0x02;// A-register is every other byte + led_control_word[1] = led_byte;// A-register is every other byte + is31_write_data(page, led_control_word, 0x13); } void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) { uint8_t i; - uint8_t row, col; + uint8_t pin, col; uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes __builtin_memset(led_control_register,0,13); for(i=0;i