From ac97870801a684b228cb7a667ea423d0ec381b1e Mon Sep 17 00:00:00 2001 From: jpetermans Date: Thu, 25 May 2017 13:00:21 -0700 Subject: reduce recurring writes to lock leds --- keyboards/infinity60/led_controller.c | 58 ++++++++++++++++++++++++++++++++--- 1 file changed, 53 insertions(+), 5 deletions(-) (limited to 'keyboards/infinity60/led_controller.c') diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c index 04793cc01f..5c177d26b0 100644 --- a/keyboards/infinity60/led_controller.c +++ b/keyboards/infinity60/led_controller.c @@ -135,16 +135,24 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) { * initialise the IS31 chip * ======================== */ void is31_init(void) { + xprintf("_is31_init\n"); // just to be sure that it's all zeroes __builtin_memset(full_page,0,0xB4+1); // zero function page, all registers (assuming full_page is all zeroes) is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1); + // disable hardware shutdown palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); palSetPad(GPIOB, 16); chThdSleepMilliseconds(10); - // software shutdown disable (i.e. turn stuff on) + // software shutdown is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); chThdSleepMilliseconds(10); + // zero function page, all registers + is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1); + chThdSleepMilliseconds(10); + // software shutdown disable (i.e. turn stuff on) + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + chThdSleepMilliseconds(10); // zero all LED registers on all 8 pages uint8_t i; for(i=0; i<8; i++) { @@ -169,7 +177,7 @@ static THD_FUNCTION(LEDthread, arg) { uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes //persistent status variables - uint8_t pwm_step_status, page_status; + uint8_t pwm_step_status, page_status, capslock_status, numlock_status; //mailbox variables uint8_t temp, msg_type; @@ -179,6 +187,8 @@ static THD_FUNCTION(LEDthread, arg) { // initialize persistent variables pwm_step_status = 4; //full brightness page_status = 0; //start frame 0 (all off/on) + numlock_status = (host_keyboard_leds() & (1<> 16) & 0XFF; msg_args[2] = (msg >> 24) & 0xFF; + xprintf("msg_type: %d-%d-%d\n", msg_type, msg_args[0], msg_args[1]); + switch (msg_type){ case SET_FULL_ROW: + xprintf("FULL ROW: %d-%d\n", msg_args[0], msg_args[1]); //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write //writes only to currently displayed page write_led_byte(page_status, msg_args[1], msg_args[0]); break; case OFF_LED: + xprintf("OFF: %d-%d\n", msg_args[0], msg_args[1]); //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page set_led_bit(msg_args[1], control_register_word, msg_args[0], 0); break; case ON_LED: + xprintf("ON: %d-%d\n", msg_args[0], msg_args[1]); set_led_bit(msg_args[1], control_register_word, msg_args[0], 1); break; case TOGGLE_LED: + xprintf("TOGGLE: %d-%d\n", msg_args[0], msg_args[1]); set_led_bit(msg_args[1], control_register_word, msg_args[0], 2); break; case BLINK_OFF_LED: + xprintf("B_on: %d-%d\n", msg_args[0], msg_args[1]); //on/off/toggle single led, msg_args[0] = row/col of led set_led_bit(msg_args[1], control_register_word, msg_args[0], 4); break; case BLINK_ON_LED: + xprintf("B_off: %d-%d\n", msg_args[0], msg_args[1]); set_led_bit(msg_args[1], control_register_word, msg_args[0], 5); break; case BLINK_TOGGLE_LED: + xprintf("B_togg: %d-%d\n", msg_args[0], msg_args[1]); set_led_bit(msg_args[1], control_register_word, msg_args[0], 6); break; case TOGGLE_ALL: //turn on/off all leds, msg_args = unused + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + chThdSleepMilliseconds(5); is31_read_register(0, 0x00, &temp); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + xprintf("TOGGLE_ALL: %d-%d\n", msg_args[0], msg_args[1]); + xprintf("temp: %d\n", temp); + led_control_reg[0] = 0; //if first leds are already on, toggle frame 0 off @@ -243,6 +268,7 @@ static THD_FUNCTION(LEDthread, arg) { break; case TOGGLE_BACKLIGHT: + xprintf("TOGGLE_BKLT: %d-%d\n", msg_args[0], msg_args[1]); //msg_args[0] = on/off //populate 9 byte rows to be written to each pin, first byte is register (pin) address @@ -261,6 +287,7 @@ static THD_FUNCTION(LEDthread, arg) { case DISPLAY_PAGE: //msg_args[0] = page to toggle on + xprintf("DSPY_PG: %d-%d\n", msg_args[0], msg_args[1]); if (page_status != msg_args[0]) { is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]); page_status = msg_args[0]; @@ -282,15 +309,24 @@ static THD_FUNCTION(LEDthread, arg) { break; case TOGGLE_NUM_LOCK: + xprintf("NMLK: %d-%d\n", msg_args[0], msg_args[1]); //msg_args[0] = 0 or 1, off/on - set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status); + if (numlock_status != msg_args[0]) { + set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status); + numlock_status = msg_args[0]; + } break; case TOGGLE_CAPS_LOCK: + xprintf("CPLK: %d-%d\n", msg_args[0], msg_args[1]); //msg_args[0] = 0 or 1, off/on - set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status); + if (capslock_status != msg_args[0]) { + set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status); + capslock_status = msg_args[0]; + } break; case STEP_BRIGHTNESS: + xprintf("Step: %d-%d\n", msg_args[0], msg_args[1]); //led_args[0] = step up (1) or down (0) switch (msg_args[0]) { case 0: @@ -337,6 +373,7 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) { return; } + xprintf("_set action-led: %x-%d\n", action, led_addr); blink_bit = action>>2;//check for blink bit action &= ~(1<<2); //strip blink bit @@ -344,10 +381,17 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin //led_addr tens column is pin#, ones column is bit position in 8-bit mask control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register + xprintf("_set control address: %x\n", control_reg_addr); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + chThdSleepMilliseconds(5); is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + xprintf("_set temp_byte_mask: %x\n", temp); + column_bit = 1<<(led_addr % 10 - 1); column_byte = temp; + xprintf("_set col_byte_mask: %x\n", column_byte); switch(action) { case 0: @@ -398,13 +442,16 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) { //blink if all leds are on if (page == 0) { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + chThdSleepMilliseconds(5); is31_read_register(0, 0x00, &temp); - chThdSleepMilliseconds(10); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); if (temp == 0xFF) { led_action |= (1<<2); //set blink bit } } + xprintf("_lock action: %d\n", led_action); set_led_bit(page,led_control_word,led_addr,led_action); } @@ -415,6 +462,7 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) { void led_controller_init(void) { uint8_t i; + xprintf("led_init\n"); /* initialise I2C */ /* I2C pins */ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL -- cgit v1.2.3