From 58a5030661b57f1dd05693053df2eddadc285f64 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 21 Aug 2021 13:34:44 -0700 Subject: [Keymap] Drashna's Improve OLEDs and custom Split code (#14063) * Fill the oleds with right mods * Enable double mods on x32 oleds * Disable forced NKRO * Make oleds fancy only on good MCUs * Overhaul oled display * Further enhance oled, with kitty! * Final oled form * Not working transport * Transport id of woring * Add acceleration * fix button placement for accel macro * Fix accelartion location and behavior * Remove OLED sync code * Fix alignment issue * Remove audio hack * Fix up zima keymap * Add matrix slave scan function and cleanup drashna.h * Clean up user space * Allow userspace sync to be disable-able * Fix weird issue with audio * Fix alignment issue with user split sync * Disable second rgb matrix task * Disable additional animations * Change dynamic keymap settings * Hacky fix for borked corne * Add Blackpill (F411) support to tractyl manuform * remove manual via eeprom reset * Remove all references to rgblight twinkle * Fix issues with config processing --- .../tractyl_manuform/5x6_right/f411/chconf.h | 38 +++++++++ .../tractyl_manuform/5x6_right/f411/config.h | 98 ++++++++++++++++++++++ .../tractyl_manuform/5x6_right/f411/f411.c | 26 ++++++ .../tractyl_manuform/5x6_right/f411/f411.h | 19 +++++ .../tractyl_manuform/5x6_right/f411/halconf.h | 25 ++++++ .../tractyl_manuform/5x6_right/f411/mcuconf.h | 34 ++++++++ .../tractyl_manuform/5x6_right/f411/rules.mk | 13 +++ 7 files changed, 253 insertions(+) create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/chconf.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f411') diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/chconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/chconf.h new file mode 100644 index 0000000000..8b55eaeef0 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/chconf.h @@ -0,0 +1,38 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +#define CH_CFG_FACTORY_MAILBOXES TRUE + +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +#define CH_CFG_FACTORY_PIPES TRUE + +#include_next diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h new file mode 100644 index 0000000000..d3e0598cd6 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -0,0 +1,98 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) BlackPill + +// wiring of each half +#define MATRIX_COL_PINS \ + { A15, B3, B4, B5, B6, B7 } +#define MATRIX_ROW_PINS \ + { B12, B13, B14, B15, A8, A9 } + +#define DIODE_DIRECTION COL2ROW + +#define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN A1 +#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2 +#define WS2812_PWM_CHANNEL 2 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } + +#define DEBUG_LED_PIN C13 + +#define AUDIO_PIN A0 +#define AUDIO_PWM_DRIVER PWMD5 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 + +/* serial.c configuration for split keyboard */ +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A2 +#define SERIAL_USART_RX_PIN A3 +#define SERIAL_USART_DRIVER SD2 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +#undef SOFT_SERIAL_PIN + +// #define EE_HANDS + +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_BANK GPIOB +#define I2C1_SDA_BANK GPIOB +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_CLOCK_SPEED 400000 + +#define ENCODERS_PAD_A \ + { B1 } +#define ENCODERS_PAD_B \ + { B2 } + +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +// #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +#define DEBUG_EEPROM_OUTPUT + +#define PMW_CS_PIN B0 +#define SPI_MODE 0 +#define SPI_DIVISOR 64 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c new file mode 100644 index 0000000000..1f6028c72a --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "f411.h" + +void matrix_init_sub_kb(void) { setPinInputHigh(A0); } + +void matrix_scan_sub_kb(void) { + if (!readPin(A0)) { + reset_keyboard(); + } + matrix_scan_user(); +} diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.h new file mode 100644 index 0000000000..525b0378b4 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "5x6_right.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h new file mode 100644 index 0000000000..94f4aff83c --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h @@ -0,0 +1,25 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +// #define HAL_USE_DAC TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define HAL_USE_GPT TRUE + +#include_next diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h new file mode 100644 index 0000000000..0f58208ccb --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h @@ -0,0 +1,34 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM5 +#define STM32_PWM_USE_TIM5 TRUE + +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk new file mode 100644 index 0000000000..ede1a6baff --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk @@ -0,0 +1,13 @@ +# MCU name +MCU = STM32F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +KEYBOARD_SHARED_EP = yes +CONSOLE_ENABLE = yes + +EEPROM_DRIVER = spi +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart +AUDIO_DRIVER = pwm_hardware -- cgit v1.2.3