From b6316c502499fd245cfb5ad468d7870d229f55d4 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Wed, 18 Mar 2020 18:14:45 +0000
Subject: [Keymap] I2C scanner (#8454)

* Add i2c scanner keymap

* Add bodge for chibios

* Fix readme title

* make chibios bodge a little cleaner

* fix typo in readme
---
 .../handwired/onekey/keymaps/i2c_scanner/config.h  |  6 ++
 .../handwired/onekey/keymaps/i2c_scanner/keymap.c  | 66 ++++++++++++++++++++++
 .../handwired/onekey/keymaps/i2c_scanner/readme.md | 36 ++++++++++++
 .../handwired/onekey/keymaps/i2c_scanner/rules.mk  |  3 +
 4 files changed, 111 insertions(+)
 create mode 100644 keyboards/handwired/onekey/keymaps/i2c_scanner/config.h
 create mode 100644 keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c
 create mode 100644 keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md
 create mode 100644 keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk

(limited to 'keyboards/handwired/onekey/keymaps/i2c_scanner')

diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h b/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h
new file mode 100644
index 0000000000..42ab08e36e
--- /dev/null
+++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h
@@ -0,0 +1,6 @@
+#pragma once
+
+// AVR: can change to other supported values
+#define F_SCL 100000UL
+
+// TODO: add some default ARM configs for i2cv1 and i2cv2
diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c b/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c
new file mode 100644
index 0000000000..262bd588f2
--- /dev/null
+++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c
@@ -0,0 +1,66 @@
+#include QMK_KEYBOARD_H
+
+#include "i2c_master.h"
+#include "debug.h"
+
+#define TIMEOUT 50
+
+// TODO: remove patch
+#ifdef PROTOCOL_CHIBIOS
+#    pragma message("ChibiOS is currently 'best effort' and might not report accurate results")
+
+i2c_status_t i2c_start_bodge(uint8_t address, uint16_t timeout) {
+    i2c_start(address);
+
+    // except on ChibiOS where the only way is do do "something"
+    uint8_t data = 0;
+    return i2c_readReg(address, 0, &data, sizeof(data), TIMEOUT);
+}
+
+#    define i2c_start i2c_start_bodge
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT(KC_A)  //
+};
+
+void do_scan(void) {
+    uint8_t nDevices = 0;
+
+    dprintf("Scanning...\n");
+
+    for (uint8_t address = 1; address < 127; address++) {
+        // The i2c_scanner uses the return value of
+        // i2c_start to see if a device did acknowledge to the address.
+        i2c_status_t error = i2c_start(address << 1, TIMEOUT);
+        if (error == I2C_STATUS_SUCCESS) {
+            i2c_stop();
+            dprintf("  I2C device found at address 0x%02X\n", address);
+            nDevices++;
+        } else {
+            // dprintf("  Unknown error (%u) at address 0x%02X\n", error, address);
+        }
+    }
+
+    if (nDevices == 0)
+        dprintf("No I2C devices found\n");
+    else
+        dprintf("done\n");
+}
+
+uint16_t scan_timer = 0;
+
+void matrix_scan_user(void) {
+    if (timer_elapsed(scan_timer) > 5000) {
+        do_scan();
+        scan_timer = timer_read();
+    }
+}
+
+void keyboard_post_init_user(void) {
+    debug_enable = true;
+    debug_matrix = true;
+
+    i2c_init();
+    scan_timer = timer_read();
+}
diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md b/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md
new file mode 100644
index 0000000000..ce6357a9c2
--- /dev/null
+++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md
@@ -0,0 +1,36 @@
+# i2c_scanner
+
+Aiming to provide a more qmk friendly version of <https://playground.arduino.cc/Main/I2cScanner/>
+
+> This very simple ~~sketch~~ keymap scans the I2C-bus for devices. If a device is found, it is reported to the ~~Arduino serial monitor~~ console.
+
+
+## Flashing
+
+Pick a target that is aligned to the MCU you want to test:
+
+```console
+make handwired/onekey/elite_c:i2c_scanner:flash # also 32u4 + dfu bootloader
+make handwired/onekey/promicro:i2c_scanner:flash
+make handwired/onekey/teensy_2:i2c_scanner:flash
+
+# ChibiOS is currently 'best effort' and might not report accurate results
+make handwired/onekey/proton_c:i2c_scanner:flash
+```
+
+others might work with additional configuration.
+
+## Usage
+
+Output is viewable through a compatible tool <https://docs.qmk.fm/#/newbs_testing_debugging?id=debugging-tools>.
+
+You can change the wires, and plug-in I2C devices while the i2c_scanner is running.
+
+The output of the console will look like this:
+
+```
+Listening:
+Scanning...
+  I2C device found at address 0x20
+done
+```
diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk b/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk
new file mode 100644
index 0000000000..04498a8831
--- /dev/null
+++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk
@@ -0,0 +1,3 @@
+CONSOLE_ENABLE = yes
+
+QUANTUM_LIB_SRC += i2c_master.c
-- 
cgit v1.2.3