From aee738c61b52cce2ce03c78587450b17e982a522 Mon Sep 17 00:00:00 2001 From: mmccoyd Date: Sat, 13 Aug 2022 12:10:01 -0700 Subject: [Keyboard] Add Hillside 46 (#17968) * 46: Copy from 52 and file rename * 46: File internals refer to 46, not 52 * 46: Board remove row * 46: Keymap: Lshift becomes ctrl, Rshift a symbol - ESC and CAPs on upper thumbs - AltGr and App on upper thumbs - Page up/down on upper thumbs - F11, F12 and mods for them on adjust * 46: Readme update for json script, tweaks * 46: Board fix LED count * 46: Keymap: Arrows right, symmetric layer keys * 46: Readme: Image link with and w/o outer pinkie * 46: Keymap: link fixed image of nav layer * 46: Keymap: fix reaching adj layer Co-authored-by: mmccoyd --- .../hillside/46/keymaps/default_dot_c/readme.md | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 keyboards/handwired/hillside/46/keymaps/default_dot_c/readme.md (limited to 'keyboards/handwired/hillside/46/keymaps/default_dot_c/readme.md') diff --git a/keyboards/handwired/hillside/46/keymaps/default_dot_c/readme.md b/keyboards/handwired/hillside/46/keymaps/default_dot_c/readme.md new file mode 100644 index 0000000000..564691d611 --- /dev/null +++ b/keyboards/handwired/hillside/46/keymaps/default_dot_c/readme.md @@ -0,0 +1,25 @@ +# Default Hillside 46 Layout (in .c format) + +This layout is for those who prefer defining their layout in a keymap.c, + instead of graphically with a keymap.json. +It is the same as the [default keymap.json layout](https://github.com/qmk/qmk_firmware/blob/master/keyboards/handwired/hillside/46/keymaps/default), + except for having only a QWERTY base layer. + +The make and flash commands are + +``` +make handwired/hillside/46:default_dot_c +make handwired/hillside/46:default_doc_c:flash + +``` + +It also serves as a simple, clean layout + to verify that the configuration and switches work. +Use the [QMK Configurator Tester](https://config.qmk.fm/#/test) + to see that the switches produce output. +All the keys should register on the layout tester + except for the caps word and the two layer keys. +The LEDs should glow a nice red. +If they do not, you may need to clear the persistent EEPROM settings with the + EE_CLR key on the adjust layer, + or enable them with the RGB_TOG key. -- cgit v1.2.3