From 13a514923a726cfa04c170c533cd706fa5d3a37e Mon Sep 17 00:00:00 2001
From: Donald Kjer <don.kjer@gmail.com>
Date: Thu, 22 Jul 2021 00:09:00 -0700
Subject: [Keyboard] Add Durgod Taurus K310 keyboard (#12314)

Co-authored-by: Tyler Tidman <tyler.tidman@draak.ca>
Co-authored-by: Simon Arlott <sa.me.uk>
---
 keyboards/durgod/k3x0/readme.md | 51 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 keyboards/durgod/k3x0/readme.md

(limited to 'keyboards/durgod/k3x0/readme.md')

diff --git a/keyboards/durgod/k3x0/readme.md b/keyboards/durgod/k3x0/readme.md
new file mode 100644
index 0000000000..cbb170160c
--- /dev/null
+++ b/keyboards/durgod/k3x0/readme.md
@@ -0,0 +1,51 @@
+# K3X0 = K310, K320, etc.
+
+This K3X0 code is shared between both the ANSI and ISO variants of both the
+K310 full-sized 104/105-key and K320 TKL 87/88-key keyboards.
+
+* Keyboard Maintainers: [dkjer](https://github.com/dkjer) and [tylert](https://github.com/tylert)
+* Hardware Supported: Durgod Taurus K310 or K320 board with STM32F070RBT6
+* Hardware Availability: K310 https://www.durgod.com/page9?product_id=53&_l=en
+                         and K320 https://www.durgod.com/page9?product_id=47&_l=en
+
+## Instructions
+
+### Build
+
+Instructions for building the K310 and K320 firmware can be found here:
+* [K310](k310/readme.md)
+* [K320](k320/readme.md)
+
+### Initial Flash
+
+For first Flashing from initial Stock Firmware
+
+1. Back up original Firmware Image:
+- Unplug
+- Short Boot0 to Vdd (See below)
+- Plug In USB
+- Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
+  - Using dfu-util:
+
+        dfu-util --list
+        dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
+
+2. Flash the QMK Firmware Image.
+- Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
+- Here are a few options for performing the initial Flash:
+  - Using [QMK Toolbox](https://github.com/qmk/qmk_toolbox)
+  - Using dfu-util:
+
+        dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
+
+You can short Boot0 to Vdd by shorting R21 to C27 on the sides closest to the processor, as shown:
+
+<img src="https://i.imgur.com/hvDnw5a.jpg" width="520" height="693" alt="Shorting Boot0 to Vdd on K320">
+
+### Subsequent Flashing
+
+For repeating Flashing you can use BootMagic:
+- BootMagic Lite has been enabled with Assigned "Esc" key 
+- Unplug USB Cable
+- Holding Esc Button 
+- Plug in USB Cable, Keyboard should be in ST-Bootloader state
-- 
cgit v1.2.3